! Started logfile: /scr/pima/bu007_uvs/J1442+3234_C_dfm.log on Sun Jun 24 02:25:47 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J1442+3234_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J1442+3234_C_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.904019 visibilities/baseline/integration-bin.
! Found source: J1442+3234
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 15296 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1442+3234_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.023780Jy  sigma=15.208029
! Fit after  self-cal, rms=0.840046Jy  sigma=12.466379
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.169 mas, bmaj=3.015 mas, bpa=4.56 degrees
! Estimated noise=0.659032 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.11562 Jy
! Component: 100  -  total flux cleaned = 0.155128 Jy
! Total flux subtracted in 100 components = 0.155128 Jy
! Clean residual min=-0.006936 max=0.018627 Jy/beam
! Clean residual mean=-0.000006 rms=0.001765 Jy/beam
! Combined flux in latest and established models = 0.155128 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.155128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096369Jy  sigma=1.369964
! Fit after  self-cal, rms=0.096069Jy  sigma=1.366794
! Inverting map 
! Added new window around map position (1.2, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0220489 Jy
! Component: 100  -  total flux cleaned = 0.03453 Jy
! Total flux subtracted in 100 components = 0.03453 Jy
! Clean residual min=-0.005437 max=0.008601 Jy/beam
! Clean residual mean=-0.000003 rms=0.001186 Jy/beam
! Combined flux in latest and established models = 0.189658 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.189658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.089090Jy  sigma=1.264186
! Fit after  self-cal, rms=0.088936Jy  sigma=1.262712
! Inverting map 
! Added new window around map position (4.2, 0.9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00943632 Jy
! Component: 100  -  total flux cleaned = 0.0156584 Jy
! Total flux subtracted in 100 components = 0.0156584 Jy
! Clean residual min=-0.004793 max=0.004743 Jy/beam
! Clean residual mean=-0.000001 rms=0.001037 Jy/beam
! Combined flux in latest and established models = 0.205317 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 0.205317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087551Jy  sigma=1.242213
! Fit after  self-cal, rms=0.087466Jy  sigma=1.241467
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.408 mas, bmaj=3.404 mas, bpa=3.832 degrees
! Estimated noise=0.415539 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00734802 Jy
! Component: 100  -  total flux cleaned = 0.0117963 Jy
! Component: 150  -  total flux cleaned = 0.0136955 Jy
! Component: 200  -  total flux cleaned = 0.0147974 Jy
! Total flux subtracted in 200 components = 0.0147974 Jy
! Clean residual min=-0.003253 max=0.004784 Jy/beam
! Clean residual mean=0.000005 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.220114 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 32 components and 0.220114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086791Jy  sigma=1.231397
! Fit after  self-cal, rms=0.086715Jy  sigma=1.230662
! Inverting map 
! Added new window around map position (23.7, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00461831 Jy
! Component: 100  -  total flux cleaned = 0.00750576 Jy
! Component: 150  -  total flux cleaned = 0.00971669 Jy
! Component: 200  -  total flux cleaned = 0.0107867 Jy
! Total flux subtracted in 200 components = 0.0107867 Jy
! Clean residual min=-0.003091 max=0.003876 Jy/beam
! Clean residual mean=0.000003 rms=0.000726 Jy/beam
! Combined flux in latest and established models = 0.230901 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 47 components and 0.230901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086430Jy  sigma=1.226008
! Fit after  self-cal, rms=0.086406Jy  sigma=1.225745
! Inverting map 
! Added new window around map position (12.3, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00339095 Jy
! Component: 100  -  total flux cleaned = 0.00527758 Jy
! Component: 150  -  total flux cleaned = 0.0068275 Jy
! Component: 200  -  total flux cleaned = 0.00816242 Jy
! Total flux subtracted in 200 components = 0.00816242 Jy
! Clean residual min=-0.002824 max=0.002770 Jy/beam
! Clean residual mean=0.000004 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.239063 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 72 components and 0.239063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086263Jy  sigma=1.223206
! Fit after  self-cal, rms=0.086247Jy  sigma=1.223044
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.408 x 3.404 at 3.832 degrees (North through East)
! Clean map  min=-0.0027664  max=0.16029 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.03     KP        1.01     
!   LA        1.02     MK        1.08     NL        1.01     OV        0.98     
!   PT        1.03     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     HN        1.01     KP        0.99     
!   LA        1.05     MK        1.01     NL        1.07     OV        0.97     
!   PT        1.05     SC        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.02     KP        1.03     
!   LA        1.00     MK        1.06     NL        0.97     OV        1.01     
!   PT        1.02     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.94     KP        0.99     
!   LA        0.98     MK        1.02     NL        1.01     OV        0.97     
!   PT        1.04     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.03     KP        1.05     
!   LA        0.98     MK        0.97     NL        0.95     OV        0.97     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.94     KP        0.98     
!   LA        0.98     MK        0.94     NL        1.02     OV        0.98     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.96     KP        0.98     
!   LA        1.01     MK        1.00     NL        1.01     OV        0.97     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        0.98     
!   LA        0.99     MK        0.95     NL        0.99     OV        0.99     
!   PT        1.02     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.086247Jy  sigma=1.223044
! Fit after  self-cal, rms=0.085868Jy  sigma=1.217960
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.41 mas, bmaj=3.401 mas, bpa=3.747 degrees
! Estimated noise=0.413601 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00104119 Jy
! Component: 100  -  total flux cleaned = 0.00188308 Jy
! Component: 150  -  total flux cleaned = 0.00265698 Jy
! Component: 200  -  total flux cleaned = 0.00334627 Jy
! Total flux subtracted in 200 components = 0.00334627 Jy
! Clean residual min=-0.002333 max=0.002620 Jy/beam
! Clean residual mean=0.000003 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.24241 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 93 components and 0.242409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085838Jy  sigma=1.217397
! Fit after  self-cal, rms=0.085835Jy  sigma=1.217317
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085835Jy  sigma=1.217317
! Fit after  self-cal, rms=0.085730Jy  sigma=1.214419
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.409 mas, bmaj=3.394 mas, bpa=3.633 degrees
! Estimated noise=0.412965 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000793372 Jy
! Component: 100  -  total flux cleaned = 0.00149432 Jy
! Component: 150  -  total flux cleaned = 0.00202167 Jy
! Component: 200  -  total flux cleaned = 0.0023694 Jy
! Total flux subtracted in 200 components = 0.0023694 Jy
! Clean residual min=-0.002228 max=0.002501 Jy/beam
! Clean residual mean=0.000003 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.244779 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 114 components and 0.244779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085711Jy  sigma=1.214089
! Fit after  self-cal, rms=0.085714Jy  sigma=1.214046
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (38.4, 7.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206359 Jy
! Component: 100  -  total flux cleaned = 0.00226038 Jy
! Component: 150  -  total flux cleaned = 0.00262391 Jy
! Component: 200  -  total flux cleaned = 0.00295171 Jy
! Total flux subtracted in 200 components = 0.00295171 Jy
! Clean residual min=-0.002211 max=0.002080 Jy/beam
! Clean residual mean=0.000003 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.247731 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 126 components and 0.247731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085658Jy  sigma=1.213232
! Fit after  self-cal, rms=0.085658Jy  sigma=1.213188
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085658Jy  sigma=1.213188
! Fit after  self-cal, rms=0.085665Jy  sigma=1.213144
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.408 mas, bmaj=3.392 mas, bpa=3.56 degrees
! Estimated noise=0.412847 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000503521 Jy
! Component: 100  -  total flux cleaned = 0.000789522 Jy
! Component: 150  -  total flux cleaned = 0.0010835 Jy
! Component: 200  -  total flux cleaned = 0.00130956 Jy
! Total flux subtracted in 200 components = 0.00130956 Jy
! Clean residual min=-0.002135 max=0.002015 Jy/beam
! Clean residual mean=0.000002 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.24904 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 138 components and 0.24904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085649Jy  sigma=1.212903
! Fit after  self-cal, rms=0.085649Jy  sigma=1.212896
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000223971 Jy
! Component: 100  -  total flux cleaned = 0.000457278 Jy
! Component: 150  -  total flux cleaned = 0.000613101 Jy
! Component: 200  -  total flux cleaned = 0.00076257 Jy
! Total flux subtracted in 200 components = 0.00076257 Jy
! Clean residual min=-0.002138 max=0.001974 Jy/beam
! Clean residual mean=0.000002 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.249803 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 142 components and 0.249803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085639Jy  sigma=1.212733
! Fit after  self-cal, rms=0.085639Jy  sigma=1.212732
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085639Jy  sigma=1.212732
! Fit after  self-cal, rms=0.085613Jy  sigma=1.212721
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.49 mas, bmaj=4.755 mas, bpa=-0.1087 degrees
! Estimated noise=0.564295 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129232 Jy
! Component: 100  -  total flux cleaned = 0.00168794 Jy
! Component: 150  -  total flux cleaned = 0.00195546 Jy
! Component: 200  -  total flux cleaned = 0.00216315 Jy
! Total flux subtracted in 200 components = 0.00216315 Jy
! Clean residual min=-0.002399 max=0.002778 Jy/beam
! Clean residual mean=0.000006 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.251966 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 154 components and 0.251966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085615Jy  sigma=1.212676
! Fit after  self-cal, rms=0.085610Jy  sigma=1.212645
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00021678 Jy
! Component: 100  -  total flux cleaned = 0.000346881 Jy
! Component: 150  -  total flux cleaned = 0.000417521 Jy
! Component: 200  -  total flux cleaned = 0.000524567 Jy
! Total flux subtracted in 200 components = 0.000524567 Jy
! Clean residual min=-0.002333 max=0.002805 Jy/beam
! Clean residual mean=0.000005 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.252491 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 162 components and 0.252491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085613Jy  sigma=1.212664
! Fit after  self-cal, rms=0.085611Jy  sigma=1.212651
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.408 mas, bmaj=3.392 mas, bpa=3.503 degrees
! Estimated noise=0.412748 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.408 x 3.392 at 3.503 degrees (North through East)
! Clean map  min=-0.001953  max=0.15966 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.171 mas, bmaj=3.005 mas, bpa=4.283 degrees
! Estimated noise=0.662922 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116126 Jy
! Component: 100  -  total flux cleaned = 0.157172 Jy
! Component: 150  -  total flux cleaned = 0.179156 Jy
! Component: 200  -  total flux cleaned = 0.192395 Jy
! Total flux subtracted in 200 components = 0.192395 Jy
! Clean residual min=-0.005266 max=0.007090 Jy/beam
! Clean residual mean=-0.000003 rms=0.001154 Jy/beam
! Combined flux in latest and established models = 0.192395 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.192395 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.408 mas, bmaj=3.392 mas, bpa=3.503 degrees
! Estimated noise=0.412748 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012283 Jy
! Component: 100  -  total flux cleaned = 0.0197904 Jy
! Component: 150  -  total flux cleaned = 0.0252827 Jy
! Component: 200  -  total flux cleaned = 0.0296615 Jy
! Total flux subtracted in 200 components = 0.0296615 Jy
! Clean residual min=-0.002744 max=0.002739 Jy/beam
! Clean residual mean=0.000002 rms=0.000720 Jy/beam
! Combined flux in latest and established models = 0.222057 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 36 components and 0.222057 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.49 mas, bmaj=4.755 mas, bpa=-0.1087 degrees
! Estimated noise=0.564295 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00632566 Jy
! Component: 100  -  total flux cleaned = 0.0107615 Jy
! Component: 150  -  total flux cleaned = 0.0140767 Jy
! Component: 200  -  total flux cleaned = 0.0167097 Jy
! Total flux subtracted in 200 components = 0.0167097 Jy
! Clean residual min=-0.002830 max=0.003125 Jy/beam
! Clean residual mean=0.000007 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.238766 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00221158 Jy
! Component: 100  -  total flux cleaned = 0.00409472 Jy
! Component: 150  -  total flux cleaned = 0.00571432 Jy
! Component: 200  -  total flux cleaned = 0.00712726 Jy
! Total flux subtracted in 200 components = 0.00712726 Jy
! Clean residual min=-0.002589 max=0.002927 Jy/beam
! Clean residual mean=0.000006 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.245893 Jy
! Adding 90 model components to the UV plane model.
! The established model now contains 112 components and 0.245894 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.408 mas, bmaj=3.392 mas, bpa=3.503 degrees
! Estimated noise=0.412748 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00194352 Jy
! Component: 100  -  total flux cleaned = 0.00329302 Jy
! Component: 150  -  total flux cleaned = 0.00412925 Jy
! Component: 200  -  total flux cleaned = 0.00485477 Jy
! Total flux subtracted in 200 components = 0.00485477 Jy
! Clean residual min=-0.002144 max=0.002134 Jy/beam
! Clean residual mean=0.000002 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.250748 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 130 components and 0.250748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085688Jy  sigma=1.214011
! Fit after  self-cal, rms=0.085682Jy  sigma=1.213754
wmodel J1442+3234_C_map.mod
! Writing 130 model components to file: J1442+3234_C_map.mod
wobs   J1442+3234_C_uvs.fits
! Writing UV FITS file: J1442+3234_C_uvs.fits
wwins  J1442+3234_C_map.win
! wwins: Wrote 6 windows to J1442+3234_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000367672 Jy
! Component: 100  -  total flux cleaned = -0.000257587 Jy
! Component: 150  -  total flux cleaned = -0.00015665 Jy
! Component: 200  -  total flux cleaned = -9.11447e-05 Jy
! Component: 250  -  total flux cleaned = 0.000100066 Jy
! Component: 300  -  total flux cleaned = 0.000131105 Jy
! Component: 350  -  total flux cleaned = 0.00022156 Jy
! Component: 400  -  total flux cleaned = 0.000339206 Jy
! Component: 450  -  total flux cleaned = 0.000368153 Jy
! Component: 500  -  total flux cleaned = 0.00042529 Jy
! Component: 550  -  total flux cleaned = 0.000425763 Jy
! Component: 600  -  total flux cleaned = 0.000426198 Jy
! Component: 650  -  total flux cleaned = 0.000480422 Jy
! Component: 700  -  total flux cleaned = 0.00053359 Jy
! Component: 750  -  total flux cleaned = 0.000533121 Jy
! Component: 800  -  total flux cleaned = 0.000481114 Jy
! Component: 850  -  total flux cleaned = 0.000455685 Jy
! Component: 900  -  total flux cleaned = 0.000380238 Jy
! Component: 950  -  total flux cleaned = 0.000380675 Jy
! Component: 1000  -  total flux cleaned = 0.000380564 Jy
! Component: 1050  -  total flux cleaned = 0.000380641 Jy
! Component: 1100  -  total flux cleaned = 0.000380859 Jy
! Component: 1150  -  total flux cleaned = 0.000500558 Jy
! Component: 1200  -  total flux cleaned = 0.000524054 Jy
! Component: 1250  -  total flux cleaned = 0.00045342 Jy
! Component: 1300  -  total flux cleaned = 0.000570335 Jy
! Component: 1350  -  total flux cleaned = 0.000524321 Jy
! Component: 1400  -  total flux cleaned = 0.000570443 Jy
! Component: 1450  -  total flux cleaned = 0.00059339 Jy
! Component: 1500  -  total flux cleaned = 0.000706498 Jy
! Component: 1550  -  total flux cleaned = 0.000706121 Jy
! Component: 1600  -  total flux cleaned = 0.000705916 Jy
! Component: 1650  -  total flux cleaned = 0.000750007 Jy
! Component: 1700  -  total flux cleaned = 0.000727847 Jy
! Component: 1750  -  total flux cleaned = 0.000706233 Jy
! Component: 1800  -  total flux cleaned = 0.000857515 Jy
! Component: 1850  -  total flux cleaned = 0.000771808 Jy
! Component: 1900  -  total flux cleaned = 0.000856885 Jy
! Component: 1950  -  total flux cleaned = 0.000793843 Jy
! Component: 2000  -  total flux cleaned = 0.000877535 Jy
! Component: 2050  -  total flux cleaned = 0.000877505 Jy
! Component: 2100  -  total flux cleaned = 0.000918807 Jy
! Component: 2150  -  total flux cleaned = 0.000877522 Jy
! Component: 2200  -  total flux cleaned = 0.00102015 Jy
! Component: 2250  -  total flux cleaned = 0.000938981 Jy
! Component: 2300  -  total flux cleaned = 0.000959232 Jy
! Component: 2350  -  total flux cleaned = 0.000999058 Jy
! Component: 2400  -  total flux cleaned = 0.000959441 Jy
! Component: 2450  -  total flux cleaned = 0.00101867 Jy
! Component: 2500  -  total flux cleaned = 0.00107741 Jy
! Component: 2550  -  total flux cleaned = 0.00115525 Jy
! Component: 2600  -  total flux cleaned = 0.00115501 Jy
! Component: 2650  -  total flux cleaned = 0.00121257 Jy
! Component: 2700  -  total flux cleaned = 0.00117445 Jy
! Component: 2750  -  total flux cleaned = 0.00128826 Jy
! Component: 2800  -  total flux cleaned = 0.00130708 Jy
! Component: 2850  -  total flux cleaned = 0.00128834 Jy
! Component: 2900  -  total flux cleaned = 0.0013256 Jy
! Component: 2950  -  total flux cleaned = 0.00147375 Jy
! Component: 3000  -  total flux cleaned = 0.0014921 Jy
! Component: 3050  -  total flux cleaned = 0.00149217 Jy
! Component: 3100  -  total flux cleaned = 0.00161958 Jy
! Component: 3150  -  total flux cleaned = 0.00156532 Jy
! Component: 3200  -  total flux cleaned = 0.00167313 Jy
! Component: 3250  -  total flux cleaned = 0.0017447 Jy
! Component: 3300  -  total flux cleaned = 0.00169127 Jy
! Component: 3350  -  total flux cleaned = 0.00174448 Jy
! Component: 3400  -  total flux cleaned = 0.00184991 Jy
! Component: 3450  -  total flux cleaned = 0.00190242 Jy
! Component: 3500  -  total flux cleaned = 0.00195472 Jy
! Component: 3550  -  total flux cleaned = 0.00198926 Jy
! Component: 3600  -  total flux cleaned = 0.00205822 Jy
! Component: 3650  -  total flux cleaned = 0.002041 Jy
! Component: 3700  -  total flux cleaned = 0.00205806 Jy
! Component: 3750  -  total flux cleaned = 0.00205792 Jy
! Component: 3800  -  total flux cleaned = 0.00205815 Jy
! Component: 3850  -  total flux cleaned = 0.00207478 Jy
! Component: 3900  -  total flux cleaned = 0.00217499 Jy
! Component: 3950  -  total flux cleaned = 0.00214163 Jy
! Component: 4000  -  total flux cleaned = 0.00204242 Jy
! Component: 4050  -  total flux cleaned = 0.00212485 Jy
! Total flux subtracted in 4096 components = 0.00214118 Jy
! Clean residual min=-0.000906 max=0.001054 Jy/beam
! Clean residual mean=0.000000 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.25289 Jy
keep
! Adding 322 model components to the UV plane model.
! The established model now contains 452 components and 0.25289 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J1442+3234_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.408 x 3.392 at 3.503 degrees (North through East)
! Clean map  min=-0.001745  max=0.15915 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J1442+3234_C_map.fits
wmodel /scr/pima/bu007_uvs/J1442+3234_C_map.mod
! Writing 452 model components to file: /scr/pima/bu007_uvs/J1442+3234_C_map.mod
wobs   /scr/pima/bu007_uvs/J1442+3234_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J1442+3234_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J1442+3234_C_map.win
! wwins: Wrote 7 windows to /scr/pima/bu007_uvs/J1442+3234_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.159148 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000290532 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.547663 0.547663 1.09533 2.19065 4.3813 8.7626 17.5252 35.0504 70.1008
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.159 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  547.782 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J1442+3234_C_dfm.log closed on Sun Jun 24 02:25:52 2018