! Started logfile: /scr/pima/bu007_uvs/J1400+2918_C_dfm.log on Sun Jun 24 02:25:15 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J1400+2918_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J1400+2918_C_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.978632 visibilities/baseline/integration-bin.
! Found source: J1400+2918
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 18320 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1400+2918_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006750Jy  sigma=16.848502
! Fit after  self-cal, rms=0.945461Jy  sigma=15.797202
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.052 mas, bmaj=3.436 mas, bpa=3.189 degrees
! Estimated noise=0.56877 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0417659 Jy
! Component: 100  -  total flux cleaned = 0.0544628 Jy
! Total flux subtracted in 100 components = 0.0544628 Jy
! Clean residual min=-0.004310 max=0.007059 Jy/beam
! Clean residual mean=-0.000000 rms=0.001080 Jy/beam
! Combined flux in latest and established models = 0.0544628 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0544628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088069Jy  sigma=1.416099
! Fit after  self-cal, rms=0.085859Jy  sigma=1.381461
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00944014 Jy
! Component: 100  -  total flux cleaned = 0.014217 Jy
! Total flux subtracted in 100 components = 0.014217 Jy
! Clean residual min=-0.003731 max=0.007272 Jy/beam
! Clean residual mean=-0.000000 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.0686798 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.0686798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084490Jy  sigma=1.357315
! Fit after  self-cal, rms=0.084411Jy  sigma=1.356368
! Inverting map 
! Added new window around map position (2.4, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0067233 Jy
! Component: 100  -  total flux cleaned = 0.010193 Jy
! Total flux subtracted in 100 components = 0.010193 Jy
! Clean residual min=-0.003624 max=0.004232 Jy/beam
! Clean residual mean=-0.000000 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.0788727 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 19 components and 0.0788727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083713Jy  sigma=1.344830
! Fit after  self-cal, rms=0.083514Jy  sigma=1.342175
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.311 mas, bmaj=3.664 mas, bpa=2.757 degrees
! Estimated noise=0.318655 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00554138 Jy
! Component: 100  -  total flux cleaned = 0.00810805 Jy
! Component: 150  -  total flux cleaned = 0.0098738 Jy
! Component: 200  -  total flux cleaned = 0.0110445 Jy
! Total flux subtracted in 200 components = 0.0110445 Jy
! Clean residual min=-0.002684 max=0.003353 Jy/beam
! Clean residual mean=0.000000 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.0899172 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 38 components and 0.0899173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083128Jy  sigma=1.336155
! Fit after  self-cal, rms=0.082987Jy  sigma=1.334190
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00221474 Jy
! Component: 100  -  total flux cleaned = 0.00248297 Jy
! Component: 150  -  total flux cleaned = 0.0027976 Jy
! Component: 200  -  total flux cleaned = 0.00313092 Jy
! Total flux subtracted in 200 components = 0.00313092 Jy
! Clean residual min=-0.002197 max=0.002089 Jy/beam
! Clean residual mean=0.000001 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.0930482 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 40 components and 0.0930482 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.082874Jy  sigma=1.332651
! Fit after  self-cal, rms=0.082823Jy  sigma=1.331977
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.311 x 3.664 at 2.757 degrees (North through East)
! Clean map  min=-0.0020383  max=0.05786 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.97     HN        0.92     KP        0.89     
!   LA        1.00     MK        0.97     NL        1.01     OV        0.93     
!   PT        1.09     SC        1.07     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.99     HN        0.94     KP        0.91     
!   LA        1.01     MK        1.02     NL        1.03     OV        0.97     
!   PT        1.02     SC        1.05     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.95     HN        0.95     KP        0.93     
!   LA        0.99     MK        0.96     NL        1.12     OV        1.00     
!   PT        0.97     SC        1.10     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.04     HN        0.98     KP        1.03     
!   LA        0.95     MK        1.00     NL        1.10     OV        0.93     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.08     HN        0.93     KP        1.04     
!   LA        0.96     MK        1.00     NL        1.02     OV        1.05     
!   PT        0.92     SC        1.05     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.04     KP        0.99     
!   LA        1.00     MK        1.04     NL        1.04     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.05     HN        1.04     KP        0.93     
!   LA        1.07     MK        1.05     NL        1.07     OV        1.00     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.07     HN        0.95     KP        1.02     
!   LA        1.00     MK        0.98     NL        1.00     OV        0.92     
!   PT        1.00     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.082823Jy  sigma=1.331977
! Fit after  self-cal, rms=0.082901Jy  sigma=1.329496
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.315 mas, bmaj=3.683 mas, bpa=2.467 degrees
! Estimated noise=0.319149 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000834134 Jy
! Component: 100  -  total flux cleaned = 0.000570875 Jy
! Component: 150  -  total flux cleaned = 0.000430992 Jy
! Component: 200  -  total flux cleaned = 0.000429672 Jy
! Total flux subtracted in 200 components = 0.000429672 Jy
! Clean residual min=-0.001727 max=0.001972 Jy/beam
! Clean residual mean=0.000000 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.0934779 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 49 components and 0.0934779 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.082854Jy  sigma=1.328938
! Fit after  self-cal, rms=0.082876Jy  sigma=1.328389
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.082876Jy  sigma=1.328389
! Fit after  self-cal, rms=0.082360Jy  sigma=1.328314
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.315 mas, bmaj=3.681 mas, bpa=2.326 degrees
! Estimated noise=0.317502 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000555804 Jy
! Component: 100  -  total flux cleaned = 0.000385837 Jy
! Component: 150  -  total flux cleaned = 0.000340502 Jy
! Component: 200  -  total flux cleaned = 0.000357853 Jy
! Total flux subtracted in 200 components = 0.000357853 Jy
! Clean residual min=-0.001705 max=0.001971 Jy/beam
! Clean residual mean=0.000000 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.0938357 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 52 components and 0.0938357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.082332Jy  sigma=1.327991
! Fit after  self-cal, rms=0.082325Jy  sigma=1.327841
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17.1, 23.7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00161545 Jy
! Component: 100  -  total flux cleaned = 0.00184522 Jy
! Component: 150  -  total flux cleaned = 0.00196399 Jy
! Component: 200  -  total flux cleaned = 0.0020155 Jy
! Total flux subtracted in 200 components = 0.0020155 Jy
! Clean residual min=-0.001616 max=0.001431 Jy/beam
! Clean residual mean=0.000000 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.0958512 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 67 components and 0.0958512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.082285Jy  sigma=1.327109
! Fit after  self-cal, rms=0.082268Jy  sigma=1.326849
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.082268Jy  sigma=1.326849
! Fit after  self-cal, rms=0.081778Jy  sigma=1.326800
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.315 mas, bmaj=3.678 mas, bpa=2.223 degrees
! Estimated noise=0.31591 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000649418 Jy
! Component: 100  -  total flux cleaned = 0.000615719 Jy
! Component: 150  -  total flux cleaned = 0.000615801 Jy
! Component: 200  -  total flux cleaned = 0.000638407 Jy
! Total flux subtracted in 200 components = 0.000638407 Jy
! Clean residual min=-0.001574 max=0.001411 Jy/beam
! Clean residual mean=0.000000 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.0964896 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 72 components and 0.0964896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081758Jy  sigma=1.326487
! Fit after  self-cal, rms=0.081753Jy  sigma=1.326414
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000291198 Jy
! Component: 100  -  total flux cleaned = 0.000270066 Jy
! Component: 150  -  total flux cleaned = 0.000271078 Jy
! Component: 200  -  total flux cleaned = 0.000289656 Jy
! Total flux subtracted in 200 components = 0.000289656 Jy
! Clean residual min=-0.001570 max=0.001429 Jy/beam
! Clean residual mean=0.000000 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.0967793 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 83 components and 0.0967793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081741Jy  sigma=1.326242
! Fit after  self-cal, rms=0.081739Jy  sigma=1.326210
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081739Jy  sigma=1.326210
! Fit after  self-cal, rms=0.081356Jy  sigma=1.326191
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.495 mas, bmaj=4.84 mas, bpa=-0.6592 degrees
! Estimated noise=0.450018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000596072 Jy
! Component: 100  -  total flux cleaned = 0.000806257 Jy
! Component: 150  -  total flux cleaned = 0.000842289 Jy
! Component: 200  -  total flux cleaned = 0.000811313 Jy
! Total flux subtracted in 200 components = 0.000811313 Jy
! Clean residual min=-0.002090 max=0.001644 Jy/beam
! Clean residual mean=-0.000000 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.0975906 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 95 components and 0.0975906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081352Jy  sigma=1.326136
! Fit after  self-cal, rms=0.081352Jy  sigma=1.326111
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000157489 Jy
! Component: 100  -  total flux cleaned = 0.000146438 Jy
! Component: 150  -  total flux cleaned = 0.000106043 Jy
! Component: 200  -  total flux cleaned = 6.78413e-05 Jy
! Total flux subtracted in 200 components = 6.78413e-05 Jy
! Clean residual min=-0.002077 max=0.001672 Jy/beam
! Clean residual mean=-0.000000 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.0976584 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 99 components and 0.0976584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081349Jy  sigma=1.326085
! Fit after  self-cal, rms=0.081350Jy  sigma=1.326075
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.315 mas, bmaj=3.675 mas, bpa=2.155 degrees
! Estimated noise=0.314561 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.315 x 3.675 at 2.155 degrees (North through East)
! Clean map  min=-0.001417  max=0.055517 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.057 mas, bmaj=3.439 mas, bpa=2.476 degrees
! Estimated noise=0.560142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0425851 Jy
! Component: 100  -  total flux cleaned = 0.0616748 Jy
! Component: 150  -  total flux cleaned = 0.072622 Jy
! Component: 200  -  total flux cleaned = 0.0792562 Jy
! Total flux subtracted in 200 components = 0.0792562 Jy
! Clean residual min=-0.003506 max=0.003449 Jy/beam
! Clean residual mean=-0.000000 rms=0.000859 Jy/beam
! Combined flux in latest and established models = 0.0792562 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0792562 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.315 mas, bmaj=3.675 mas, bpa=2.155 degrees
! Estimated noise=0.314561 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00568376 Jy
! Component: 100  -  total flux cleaned = 0.00917654 Jy
! Component: 150  -  total flux cleaned = 0.0116893 Jy
! Component: 200  -  total flux cleaned = 0.0133797 Jy
! Total flux subtracted in 200 components = 0.0133797 Jy
! Clean residual min=-0.001830 max=0.001573 Jy/beam
! Clean residual mean=-0.000000 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.092636 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 38 components and 0.092636 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.495 mas, bmaj=4.84 mas, bpa=-0.6592 degrees
! Estimated noise=0.450018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00211985 Jy
! Component: 100  -  total flux cleaned = 0.00327578 Jy
! Component: 150  -  total flux cleaned = 0.00372618 Jy
! Component: 200  -  total flux cleaned = 0.00401035 Jy
! Total flux subtracted in 200 components = 0.00401035 Jy
! Clean residual min=-0.002151 max=0.001771 Jy/beam
! Clean residual mean=-0.000000 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.0966463 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.64922e-05 Jy
! Component: 100  -  total flux cleaned = 0.000201358 Jy
! Component: 150  -  total flux cleaned = 0.000257963 Jy
! Component: 200  -  total flux cleaned = 0.000343901 Jy
! Total flux subtracted in 200 components = 0.000343901 Jy
! Clean residual min=-0.002087 max=0.001675 Jy/beam
! Clean residual mean=-0.000000 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.0969902 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 67 components and 0.0969902 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.315 mas, bmaj=3.675 mas, bpa=2.155 degrees
! Estimated noise=0.314561 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00020696 Jy
! Component: 100  -  total flux cleaned = -0.000173896 Jy
! Component: 150  -  total flux cleaned = -6.26417e-05 Jy
! Component: 200  -  total flux cleaned = 1.04572e-05 Jy
! Total flux subtracted in 200 components = 1.04572e-05 Jy
! Clean residual min=-0.001561 max=0.001392 Jy/beam
! Clean residual mean=0.000000 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0970007 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 81 components and 0.0970007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081350Jy  sigma=1.326141
! Fit after  self-cal, rms=0.081348Jy  sigma=1.326065
wmodel J1400+2918_C_map.mod
! Writing 81 model components to file: J1400+2918_C_map.mod
wobs   J1400+2918_C_uvs.fits
! Writing UV FITS file: J1400+2918_C_uvs.fits
wwins  J1400+2918_C_map.win
! wwins: Wrote 3 windows to J1400+2918_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000429183 Jy
! Component: 100  -  total flux cleaned = -0.000679035 Jy
! Component: 150  -  total flux cleaned = -0.00084658 Jy
! Component: 200  -  total flux cleaned = -0.000916021 Jy
! Component: 250  -  total flux cleaned = -0.00100556 Jy
! Component: 300  -  total flux cleaned = -0.00109251 Jy
! Component: 350  -  total flux cleaned = -0.00119916 Jy
! Component: 400  -  total flux cleaned = -0.00121995 Jy
! Component: 450  -  total flux cleaned = -0.00126073 Jy
! Component: 500  -  total flux cleaned = -0.00126063 Jy
! Component: 550  -  total flux cleaned = -0.00133925 Jy
! Component: 600  -  total flux cleaned = -0.00141605 Jy
! Component: 650  -  total flux cleaned = -0.00141553 Jy
! Component: 700  -  total flux cleaned = -0.00143404 Jy
! Component: 750  -  total flux cleaned = -0.00141551 Jy
! Component: 800  -  total flux cleaned = -0.00139739 Jy
! Component: 850  -  total flux cleaned = -0.00137975 Jy
! Component: 900  -  total flux cleaned = -0.00139714 Jy
! Component: 950  -  total flux cleaned = -0.00134534 Jy
! Component: 1000  -  total flux cleaned = -0.00134534 Jy
! Component: 1050  -  total flux cleaned = -0.00131192 Jy
! Component: 1100  -  total flux cleaned = -0.0013122 Jy
! Component: 1150  -  total flux cleaned = -0.00132888 Jy
! Component: 1200  -  total flux cleaned = -0.00137747 Jy
! Component: 1250  -  total flux cleaned = -0.00137754 Jy
! Component: 1300  -  total flux cleaned = -0.00136184 Jy
! Component: 1350  -  total flux cleaned = -0.00137712 Jy
! Component: 1400  -  total flux cleaned = -0.00139247 Jy
! Component: 1450  -  total flux cleaned = -0.00139268 Jy
! Component: 1500  -  total flux cleaned = -0.00136269 Jy
! Component: 1550  -  total flux cleaned = -0.00134787 Jy
! Component: 1600  -  total flux cleaned = -0.0013626 Jy
! Component: 1650  -  total flux cleaned = -0.00131885 Jy
! Component: 1700  -  total flux cleaned = -0.00129008 Jy
! Component: 1750  -  total flux cleaned = -0.00124708 Jy
! Component: 1800  -  total flux cleaned = -0.00123302 Jy
! Component: 1850  -  total flux cleaned = -0.00123288 Jy
! Component: 1900  -  total flux cleaned = -0.00123277 Jy
! Component: 1950  -  total flux cleaned = -0.0012465 Jy
! Component: 2000  -  total flux cleaned = -0.00123273 Jy
! Component: 2050  -  total flux cleaned = -0.00124631 Jy
! Component: 2100  -  total flux cleaned = -0.00121947 Jy
! Component: 2150  -  total flux cleaned = -0.00124622 Jy
! Component: 2200  -  total flux cleaned = -0.00128596 Jy
! Component: 2250  -  total flux cleaned = -0.00131201 Jy
! Component: 2300  -  total flux cleaned = -0.00127284 Jy
! Component: 2350  -  total flux cleaned = -0.00124686 Jy
! Component: 2400  -  total flux cleaned = -0.00125975 Jy
! Component: 2450  -  total flux cleaned = -0.00124703 Jy
! Component: 2500  -  total flux cleaned = -0.00127234 Jy
! Component: 2550  -  total flux cleaned = -0.00125967 Jy
! Component: 2600  -  total flux cleaned = -0.00124724 Jy
! Component: 2650  -  total flux cleaned = -0.00118556 Jy
! Component: 2700  -  total flux cleaned = -0.0011979 Jy
! Component: 2750  -  total flux cleaned = -0.00119779 Jy
! Component: 2800  -  total flux cleaned = -0.00117359 Jy
! Component: 2850  -  total flux cleaned = -0.00113747 Jy
! Component: 2900  -  total flux cleaned = -0.00111366 Jy
! Component: 2950  -  total flux cleaned = -0.00113736 Jy
! Component: 3000  -  total flux cleaned = -0.00114888 Jy
! Component: 3050  -  total flux cleaned = -0.00112538 Jy
! Component: 3100  -  total flux cleaned = -0.0011137 Jy
! Component: 3150  -  total flux cleaned = -0.00112519 Jy
! Component: 3200  -  total flux cleaned = -0.00112514 Jy
! Component: 3250  -  total flux cleaned = -0.00107944 Jy
! Component: 3300  -  total flux cleaned = -0.00110217 Jy
! Component: 3350  -  total flux cleaned = -0.00104585 Jy
! Component: 3400  -  total flux cleaned = -0.00111306 Jy
! Component: 3450  -  total flux cleaned = -0.00107959 Jy
! Component: 3500  -  total flux cleaned = -0.0011017 Jy
! Component: 3550  -  total flux cleaned = -0.00114568 Jy
! Component: 3600  -  total flux cleaned = -0.0011128 Jy
! Component: 3650  -  total flux cleaned = -0.00112379 Jy
! Component: 3700  -  total flux cleaned = -0.00114548 Jy
! Component: 3750  -  total flux cleaned = -0.0011454 Jy
! Component: 3800  -  total flux cleaned = -0.00115608 Jy
! Component: 3850  -  total flux cleaned = -0.00116673 Jy
! Component: 3900  -  total flux cleaned = -0.00116675 Jy
! Component: 3950  -  total flux cleaned = -0.00116679 Jy
! Component: 4000  -  total flux cleaned = -0.00118776 Jy
! Component: 4050  -  total flux cleaned = -0.00118775 Jy
! Total flux subtracted in 4096 components = -0.0012188 Jy
! Clean residual min=-0.000565 max=0.000558 Jy/beam
! Clean residual mean=-0.000000 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.0957819 Jy
keep
! Adding 304 model components to the UV plane model.
! The established model now contains 385 components and 0.0957819 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J1400+2918_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.315 x 3.675 at 2.155 degrees (North through East)
! Clean map  min=-0.0013248  max=0.055044 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J1400+2918_C_map.fits
wmodel /scr/pima/bu007_uvs/J1400+2918_C_map.mod
! Writing 385 model components to file: /scr/pima/bu007_uvs/J1400+2918_C_map.mod
wobs   /scr/pima/bu007_uvs/J1400+2918_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J1400+2918_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J1400+2918_C_map.win
! wwins: Wrote 4 windows to /scr/pima/bu007_uvs/J1400+2918_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0550443 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000180698 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.984832 0.984832 1.96966 3.93933 7.87865 15.7573 31.5146 63.0292
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.055 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  304.62 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J1400+2918_C_dfm.log closed on Sun Jun 24 02:25:19 2018