! Started logfile: /scr/pima/bu007_uvs/J1344+3355_C_dfm.log on Sun Jun 24 02:24:29 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J1344+3355_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J1344+3355_C_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.945679 visibilities/baseline/integration-bin.
! Found source: J1344+3355
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 15320 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1344+3355_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003702Jy  sigma=16.303762
! Fit after  self-cal, rms=0.960585Jy  sigma=15.577200
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.165 mas, bmaj=3.145 mas, bpa=8.41 degrees
! Estimated noise=0.540553 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0347003 Jy
! Component: 100  -  total flux cleaned = 0.0422908 Jy
! Total flux subtracted in 100 components = 0.0422908 Jy
! Clean residual min=-0.003598 max=0.003354 Jy/beam
! Clean residual mean=0.000002 rms=0.000867 Jy/beam
! Combined flux in latest and established models = 0.0422908 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.0422908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088812Jy  sigma=1.336318
! Fit after  self-cal, rms=0.087048Jy  sigma=1.305791
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00499962 Jy
! Component: 100  -  total flux cleaned = 0.00649345 Jy
! Total flux subtracted in 100 components = 0.00649345 Jy
! Clean residual min=-0.002970 max=0.003589 Jy/beam
! Clean residual mean=0.000004 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.0487843 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0487843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086890Jy  sigma=1.302160
! Fit after  self-cal, rms=0.086849Jy  sigma=1.301749
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.379 mas, bmaj=3.448 mas, bpa=7.672 degrees
! Estimated noise=0.366686 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115628 Jy
! Component: 100  -  total flux cleaned = 0.00173219 Jy
! Component: 150  -  total flux cleaned = 0.00191267 Jy
! Component: 200  -  total flux cleaned = 0.00206377 Jy
! Total flux subtracted in 200 components = 0.00206377 Jy
! Clean residual min=-0.002204 max=0.002254 Jy/beam
! Clean residual mean=-0.000003 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.0508481 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 25 components and 0.0508481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086837Jy  sigma=1.301341
! Fit after  self-cal, rms=0.086826Jy  sigma=1.301264
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.379 x 3.448 at 7.672 degrees (North through East)
! Clean map  min=-0.0021088  max=0.047532 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.98     HN        0.94     KP        0.85     
!   LA        1.11     MK        1.11     NL        0.92     OV        1.01     
!   PT        0.96     SC        0.89     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.01     KP        0.95     
!   LA        0.92     MK        1.14     NL        0.88     OV        1.04     
!   PT        0.89     SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.96     
!   LA        1.03     MK        0.94     NL        1.04     OV        0.95     
!   PT        1.12     SC        1.21     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.07     HN        0.98     KP        0.85     
!   LA        1.12     MK        1.03     NL        1.09     OV        0.99     
!   PT        0.95     SC        0.95     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.04     HN        0.98     KP        1.00     
!   LA        1.21     MK        1.08     NL        0.96     OV        1.02     
!   PT        0.98     SC        0.87     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.11     HN        0.97     KP        0.96     
!   LA        1.04     MK        1.11     NL        0.99     OV        1.06     
!   PT        0.99     SC        0.89     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        1.02     HN        1.01     KP        0.95     
!   LA        1.07     MK        1.11     NL        1.06     OV        1.07     
!   PT        0.84     SC        0.96     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.19     HN        0.94     KP        0.87     
!   LA        1.19     MK        1.02     NL        0.98     OV        1.09     
!   PT        0.95     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.086826Jy  sigma=1.301264
! Fit after  self-cal, rms=0.087279Jy  sigma=1.297911
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.381 mas, bmaj=3.441 mas, bpa=8.185 degrees
! Estimated noise=0.366561 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000377492 Jy
! Component: 100  -  total flux cleaned = 0.000453367 Jy
! Component: 150  -  total flux cleaned = 0.000514895 Jy
! Component: 200  -  total flux cleaned = 0.000567051 Jy
! Total flux subtracted in 200 components = 0.000567051 Jy
! Clean residual min=-0.002122 max=0.002158 Jy/beam
! Clean residual mean=-0.000004 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.0514151 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 33 components and 0.0514151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087272Jy  sigma=1.297787
! Fit after  self-cal, rms=0.087403Jy  sigma=1.296729
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087403Jy  sigma=1.296729
! Fit after  self-cal, rms=0.087758Jy  sigma=1.294720
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.378 mas, bmaj=3.435 mas, bpa=8.075 degrees
! Estimated noise=0.366515 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000366308 Jy
! Component: 100  -  total flux cleaned = 0.000434966 Jy
! Component: 150  -  total flux cleaned = 0.000463163 Jy
! Component: 200  -  total flux cleaned = 0.000476232 Jy
! Total flux subtracted in 200 components = 0.000476232 Jy
! Clean residual min=-0.001936 max=0.002021 Jy/beam
! Clean residual mean=-0.000003 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.0518913 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 37 components and 0.0518913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087751Jy  sigma=1.294642
! Fit after  self-cal, rms=0.087859Jy  sigma=1.294147
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.42345e-05 Jy
! Component: 100  -  total flux cleaned = 7.25501e-05 Jy
! Component: 150  -  total flux cleaned = 7.28168e-05 Jy
! Component: 200  -  total flux cleaned = 8.46266e-05 Jy
! Total flux subtracted in 200 components = 8.46266e-05 Jy
! Clean residual min=-0.001982 max=0.002002 Jy/beam
! Clean residual mean=-0.000003 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.051976 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 38 components and 0.051976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087854Jy  sigma=1.294099
! Fit after  self-cal, rms=0.087858Jy  sigma=1.294083
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087858Jy  sigma=1.294083
! Fit after  self-cal, rms=0.089527Jy  sigma=1.293904
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.377 mas, bmaj=3.426 mas, bpa=8.083 degrees
! Estimated noise=0.369379 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000425954 Jy
! Component: 100  -  total flux cleaned = 0.000519962 Jy
! Component: 150  -  total flux cleaned = 0.000596572 Jy
! Component: 200  -  total flux cleaned = 0.000595781 Jy
! Total flux subtracted in 200 components = 0.000595781 Jy
! Clean residual min=-0.002033 max=0.002036 Jy/beam
! Clean residual mean=-0.000002 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.0525717 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 40 components and 0.0525717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.089522Jy  sigma=1.293813
! Fit after  self-cal, rms=0.089578Jy  sigma=1.293482
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (34.5, -51.9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150985 Jy
! Component: 100  -  total flux cleaned = 0.0018742 Jy
! Component: 150  -  total flux cleaned = 0.00192427 Jy
! Component: 200  -  total flux cleaned = 0.00190452 Jy
! Total flux subtracted in 200 components = 0.00190452 Jy
! Clean residual min=-0.001997 max=0.002173 Jy/beam
! Clean residual mean=-0.000002 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.0544763 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 57 components and 0.0544763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.089544Jy  sigma=1.292795
! Fit after  self-cal, rms=0.089535Jy  sigma=1.292567
! Inverting map 
! Added new window around map position (-35.7, -69).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00189925 Jy
! Component: 100  -  total flux cleaned = 0.00234035 Jy
! Component: 150  -  total flux cleaned = 0.00240582 Jy
! Component: 200  -  total flux cleaned = 0.00249195 Jy
! Total flux subtracted in 200 components = 0.00249195 Jy
! Clean residual min=-0.001989 max=0.001890 Jy/beam
! Clean residual mean=-0.000002 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.0569682 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 69 components and 0.0569682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.089480Jy  sigma=1.291843
! Fit after  self-cal, rms=0.089465Jy  sigma=1.291532
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.089465Jy  sigma=1.291532
! Fit after  self-cal, rms=0.090362Jy  sigma=1.291432
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.43 mas, bmaj=4.73 mas, bpa=4.357 degrees
! Estimated noise=0.522679 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137901 Jy
! Component: 100  -  total flux cleaned = 0.00185633 Jy
! Component: 150  -  total flux cleaned = 0.00204733 Jy
! Component: 200  -  total flux cleaned = 0.00215612 Jy
! Total flux subtracted in 200 components = 0.00215612 Jy
! Clean residual min=-0.002600 max=0.002684 Jy/beam
! Clean residual mean=-0.000004 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.0591243 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 78 components and 0.0591243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090352Jy  sigma=1.291293
! Fit after  self-cal, rms=0.090364Jy  sigma=1.290712
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00081988 Jy
! Component: 100  -  total flux cleaned = 0.000912075 Jy
! Component: 150  -  total flux cleaned = 0.00101383 Jy
! Component: 200  -  total flux cleaned = 0.00112826 Jy
! Total flux subtracted in 200 components = 0.00112826 Jy
! Clean residual min=-0.002583 max=0.002754 Jy/beam
! Clean residual mean=-0.000004 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.0602526 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 82 components and 0.0602526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090363Jy  sigma=1.290722
! Fit after  self-cal, rms=0.090326Jy  sigma=1.290557
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.374 mas, bmaj=3.413 mas, bpa=8.236 degrees
! Estimated noise=0.370186 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.374 x 3.413 at 8.236 degrees (North through East)
! Clean map  min=-0.002036  max=0.047561 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.169 mas, bmaj=3.111 mas, bpa=8.543 degrees
! Estimated noise=0.538711 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0370829 Jy
! Component: 100  -  total flux cleaned = 0.0458415 Jy
! Component: 150  -  total flux cleaned = 0.0505735 Jy
! Component: 200  -  total flux cleaned = 0.0532823 Jy
! Total flux subtracted in 200 components = 0.0532823 Jy
! Clean residual min=-0.003089 max=0.003386 Jy/beam
! Clean residual mean=0.000001 rms=0.000767 Jy/beam
! Combined flux in latest and established models = 0.0532823 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0532823 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.374 mas, bmaj=3.413 mas, bpa=8.236 degrees
! Estimated noise=0.370186 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 2.7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00290709 Jy
! Component: 100  -  total flux cleaned = 0.00432603 Jy
! Component: 150  -  total flux cleaned = 0.00529686 Jy
! Component: 200  -  total flux cleaned = 0.00596946 Jy
! Total flux subtracted in 200 components = 0.00596946 Jy
! Clean residual min=-0.002101 max=0.001950 Jy/beam
! Clean residual mean=-0.000002 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.0592518 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 48 components and 0.0592518 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.43 mas, bmaj=4.73 mas, bpa=4.357 degrees
! Estimated noise=0.522679 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103485 Jy
! Component: 100  -  total flux cleaned = 0.00164677 Jy
! Component: 150  -  total flux cleaned = 0.00227927 Jy
! Component: 200  -  total flux cleaned = 0.00280172 Jy
! Total flux subtracted in 200 components = 0.00280172 Jy
! Clean residual min=-0.002602 max=0.002142 Jy/beam
! Clean residual mean=-0.000002 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.0620535 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000445306 Jy
! Component: 100  -  total flux cleaned = 0.000758635 Jy
! Component: 150  -  total flux cleaned = 0.000993447 Jy
! Component: 200  -  total flux cleaned = 0.00114247 Jy
! Total flux subtracted in 200 components = 0.00114247 Jy
! Clean residual min=-0.002583 max=0.002153 Jy/beam
! Clean residual mean=-0.000002 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.0631959 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 91 components and 0.0631959 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.374 mas, bmaj=3.413 mas, bpa=8.236 degrees
! Estimated noise=0.370186 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.97019e-05 Jy
! Component: 100  -  total flux cleaned = 5.06947e-05 Jy
! Component: 150  -  total flux cleaned = 0.00019199 Jy
! Component: 200  -  total flux cleaned = 0.00022383 Jy
! Total flux subtracted in 200 components = 0.00022383 Jy
! Clean residual min=-0.001995 max=0.001918 Jy/beam
! Clean residual mean=-0.000000 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.0634198 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 107 components and 0.0634198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090287Jy  sigma=1.290168
! Fit after  self-cal, rms=0.090238Jy  sigma=1.289647
wmodel J1344+3355_C_map.mod
! Writing 107 model components to file: J1344+3355_C_map.mod
wobs   J1344+3355_C_uvs.fits
! Writing UV FITS file: J1344+3355_C_uvs.fits
wwins  J1344+3355_C_map.win
! wwins: Wrote 4 windows to J1344+3355_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000560832 Jy
! Component: 100  -  total flux cleaned = -0.0010043 Jy
! Component: 150  -  total flux cleaned = -0.00148725 Jy
! Component: 200  -  total flux cleaned = -0.00164109 Jy
! Component: 250  -  total flux cleaned = -0.00176057 Jy
! Component: 300  -  total flux cleaned = -0.00193408 Jy
! Component: 350  -  total flux cleaned = -0.00193391 Jy
! Component: 400  -  total flux cleaned = -0.00198847 Jy
! Component: 450  -  total flux cleaned = -0.0020418 Jy
! Component: 500  -  total flux cleaned = -0.00212031 Jy
! Component: 550  -  total flux cleaned = -0.00217185 Jy
! Component: 600  -  total flux cleaned = -0.00229823 Jy
! Component: 650  -  total flux cleaned = -0.00232285 Jy
! Component: 700  -  total flux cleaned = -0.00244615 Jy
! Component: 750  -  total flux cleaned = -0.00249491 Jy
! Component: 800  -  total flux cleaned = -0.00256715 Jy
! Component: 850  -  total flux cleaned = -0.00268542 Jy
! Component: 900  -  total flux cleaned = -0.0027787 Jy
! Component: 950  -  total flux cleaned = -0.00280168 Jy
! Component: 1000  -  total flux cleaned = -0.00289309 Jy
! Component: 1050  -  total flux cleaned = -0.00298325 Jy
! Component: 1100  -  total flux cleaned = -0.00302797 Jy
! Component: 1150  -  total flux cleaned = -0.00307183 Jy
! Component: 1200  -  total flux cleaned = -0.00309376 Jy
! Component: 1250  -  total flux cleaned = -0.00311504 Jy
! Component: 1300  -  total flux cleaned = -0.00315808 Jy
! Component: 1350  -  total flux cleaned = -0.0031582 Jy
! Component: 1400  -  total flux cleaned = -0.00326344 Jy
! Component: 1450  -  total flux cleaned = -0.00326339 Jy
! Component: 1500  -  total flux cleaned = -0.00328389 Jy
! Component: 1550  -  total flux cleaned = -0.0033045 Jy
! Component: 1600  -  total flux cleaned = -0.0034264 Jy
! Component: 1650  -  total flux cleaned = -0.00342621 Jy
! Component: 1700  -  total flux cleaned = -0.00342624 Jy
! Component: 1750  -  total flux cleaned = -0.00360393 Jy
! Component: 1800  -  total flux cleaned = -0.00360355 Jy
! Component: 1850  -  total flux cleaned = -0.00362298 Jy
! Component: 1900  -  total flux cleaned = -0.00371936 Jy
! Component: 1950  -  total flux cleaned = -0.00375749 Jy
! Component: 2000  -  total flux cleaned = -0.00383339 Jy
! Component: 2050  -  total flux cleaned = -0.00387093 Jy
! Component: 2100  -  total flux cleaned = -0.0038897 Jy
! Component: 2150  -  total flux cleaned = -0.00396396 Jy
! Component: 2200  -  total flux cleaned = -0.00398253 Jy
! Component: 2250  -  total flux cleaned = -0.00403731 Jy
! Component: 2300  -  total flux cleaned = -0.004146 Jy
! Component: 2350  -  total flux cleaned = -0.00414591 Jy
! Component: 2400  -  total flux cleaned = -0.00416378 Jy
! Component: 2450  -  total flux cleaned = -0.00421727 Jy
! Component: 2500  -  total flux cleaned = -0.0042175 Jy
! Component: 2550  -  total flux cleaned = -0.00432273 Jy
! Component: 2600  -  total flux cleaned = -0.0043228 Jy
! Component: 2650  -  total flux cleaned = -0.00437468 Jy
! Component: 2700  -  total flux cleaned = -0.00446059 Jy
! Component: 2750  -  total flux cleaned = -0.00439222 Jy
! Component: 2800  -  total flux cleaned = -0.00434156 Jy
! Component: 2850  -  total flux cleaned = -0.00439224 Jy
! Component: 2900  -  total flux cleaned = -0.00442591 Jy
! Component: 2950  -  total flux cleaned = -0.00447582 Jy
! Component: 3000  -  total flux cleaned = -0.00440942 Jy
! Component: 3050  -  total flux cleaned = -0.00444221 Jy
! Component: 3100  -  total flux cleaned = -0.00444232 Jy
! Component: 3150  -  total flux cleaned = -0.00440984 Jy
! Component: 3200  -  total flux cleaned = -0.00450689 Jy
! Component: 3250  -  total flux cleaned = -0.00453907 Jy
! Component: 3300  -  total flux cleaned = -0.00445894 Jy
! Component: 3350  -  total flux cleaned = -0.00447485 Jy
! Component: 3400  -  total flux cleaned = -0.00452208 Jy
! Component: 3450  -  total flux cleaned = -0.00458492 Jy
! Component: 3500  -  total flux cleaned = -0.00453791 Jy
! Component: 3550  -  total flux cleaned = -0.00460018 Jy
! Component: 3600  -  total flux cleaned = -0.00452279 Jy
! Component: 3650  -  total flux cleaned = -0.0045844 Jy
! Component: 3700  -  total flux cleaned = -0.00459962 Jy
! Component: 3750  -  total flux cleaned = -0.00469099 Jy
! Component: 3800  -  total flux cleaned = -0.004706 Jy
! Component: 3850  -  total flux cleaned = -0.00464557 Jy
! Component: 3900  -  total flux cleaned = -0.00467563 Jy
! Component: 3950  -  total flux cleaned = -0.00473567 Jy
! Component: 4000  -  total flux cleaned = -0.00475042 Jy
! Component: 4050  -  total flux cleaned = -0.00475047 Jy
! Total flux subtracted in 4096 components = -0.00472098 Jy
! Clean residual min=-0.000777 max=0.000977 Jy/beam
! Clean residual mean=0.000000 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.0586988 Jy
keep
! Adding 338 model components to the UV plane model.
! The established model now contains 445 components and 0.0586988 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J1344+3355_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.374 x 3.413 at 8.236 degrees (North through East)
! Clean map  min=-0.0014541  max=0.047306 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J1344+3355_C_map.fits
wmodel /scr/pima/bu007_uvs/J1344+3355_C_map.mod
! Writing 445 model components to file: /scr/pima/bu007_uvs/J1344+3355_C_map.mod
wobs   /scr/pima/bu007_uvs/J1344+3355_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J1344+3355_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J1344+3355_C_map.win
! wwins: Wrote 5 windows to /scr/pima/bu007_uvs/J1344+3355_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0473058 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000264065 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.67462 1.67462 3.34925 6.6985 13.397 26.794 53.588
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.047 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  179.144 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J1344+3355_C_dfm.log closed on Sun Jun 24 02:24:33 2018