! Started logfile: /scr/pima/bu007_uvs/J1322+3252_C_dfm.log on Sun Jun 24 02:23:56 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J1322+3252_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J1322+3252_C_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.957005 visibilities/baseline/integration-bin.
! Found source: J1322+3252
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 15848 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1322+3252_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005803Jy  sigma=15.919143
! Fit after  self-cal, rms=0.961632Jy  sigma=15.181487
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.103 mas, bmaj=2.987 mas, bpa=4.018 degrees
! Estimated noise=0.594572 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0343006 Jy
! Component: 100  -  total flux cleaned = 0.0417804 Jy
! Total flux subtracted in 100 components = 0.0417804 Jy
! Clean residual min=-0.003213 max=0.003393 Jy/beam
! Clean residual mean=0.000000 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.0417804 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.0417804 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083834Jy  sigma=1.263685
! Fit after  self-cal, rms=0.081804Jy  sigma=1.233809
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00472351 Jy
! Component: 100  -  total flux cleaned = 0.00573153 Jy
! Total flux subtracted in 100 components = 0.00573153 Jy
! Clean residual min=-0.003392 max=0.003460 Jy/beam
! Clean residual mean=0.000001 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.0475119 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 8 components and 0.0475119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081692Jy  sigma=1.229894
! Fit after  self-cal, rms=0.081663Jy  sigma=1.229435
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.317 mas, bmaj=3.327 mas, bpa=3.214 degrees
! Estimated noise=0.376283 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000390761 Jy
! Component: 100  -  total flux cleaned = 0.000515106 Jy
! Component: 150  -  total flux cleaned = 0.00063967 Jy
! Component: 200  -  total flux cleaned = 0.000651714 Jy
! Total flux subtracted in 200 components = 0.000651714 Jy
! Clean residual min=-0.002398 max=0.001952 Jy/beam
! Clean residual mean=0.000003 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.0481636 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 20 components and 0.0481636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081662Jy  sigma=1.229216
! Fit after  self-cal, rms=0.081661Jy  sigma=1.229184
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.317 x 3.327 at 3.214 degrees (North through East)
! Clean map  min=-0.0022946  max=0.046934 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.90     HN        0.95     KP        0.86     
!   LA        1.17     MK        0.96     NL        1.06     OV        0.90     
!   PT        0.98     SC        0.92     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     HN        0.99     KP        0.82     
!   LA        1.05     MK        1.06     NL        1.07     OV        0.93     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.89     HN        1.01     KP        0.89     
!   LA        0.90     MK        0.95     NL        1.16     OV        1.08     
!   PT        1.10     SC        1.20     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        0.96     KP        0.92     
!   LA        1.33     MK        1.06     NL        1.00     OV        0.93     
!   PT        1.03     SC        1.07     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        0.88     KP        0.94     
!   LA        1.15     MK        1.01     NL        0.94     OV        1.07     
!   PT        0.91     SC        0.93     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.88     HN        1.10     KP        1.08     
!   LA        1.19     MK        1.03     NL        0.94     OV        0.86     
!   PT        1.09     SC        0.97     
! 
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        1.14     KP        0.76     
!   LA        1.18     MK        1.06     NL        1.05     OV        1.02     
!   PT        0.99     SC        0.90     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.92     KP        0.85     
!   LA        1.11     MK        1.12     NL        1.07     OV        0.89     
!   PT        1.04     SC        0.90     
! 
! 
! Fit before self-cal, rms=0.081661Jy  sigma=1.229184
! Fit after  self-cal, rms=0.082394Jy  sigma=1.225062
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.329 mas, bmaj=3.34 mas, bpa=3.264 degrees
! Estimated noise=0.372224 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000461769 Jy
! Component: 100  -  total flux cleaned = -0.000592127 Jy
! Component: 150  -  total flux cleaned = -0.000713253 Jy
! Component: 200  -  total flux cleaned = -0.000756839 Jy
! Total flux subtracted in 200 components = -0.000756839 Jy
! Clean residual min=-0.001873 max=0.001784 Jy/beam
! Clean residual mean=0.000001 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.0474068 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 26 components and 0.0474068 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.082381Jy  sigma=1.225017
! Fit after  self-cal, rms=0.082558Jy  sigma=1.223304
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.082558Jy  sigma=1.223304
! Fit after  self-cal, rms=0.084165Jy  sigma=1.221193
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.333 mas, bmaj=3.344 mas, bpa=3.331 degrees
! Estimated noise=0.369596 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000309818 Jy
! Component: 100  -  total flux cleaned = -0.00043845 Jy
! Component: 150  -  total flux cleaned = -0.000486045 Jy
! Component: 200  -  total flux cleaned = -0.000516087 Jy
! Total flux subtracted in 200 components = -0.000516087 Jy
! Clean residual min=-0.001725 max=0.001705 Jy/beam
! Clean residual mean=0.000002 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.0468907 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 28 components and 0.0468907 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084157Jy  sigma=1.221153
! Fit after  self-cal, rms=0.084310Jy  sigma=1.220541
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.18102e-05 Jy
! Component: 100  -  total flux cleaned = -8.34491e-05 Jy
! Component: 150  -  total flux cleaned = -9.20618e-05 Jy
! Component: 200  -  total flux cleaned = -0.000109446 Jy
! Total flux subtracted in 200 components = -0.000109446 Jy
! Clean residual min=-0.001809 max=0.001743 Jy/beam
! Clean residual mean=0.000002 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.0467813 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 31 components and 0.0467813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084306Jy  sigma=1.220503
! Fit after  self-cal, rms=0.084305Jy  sigma=1.220485
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084305Jy  sigma=1.220485
! Fit after  self-cal, rms=0.084638Jy  sigma=1.220167
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.338 mas, bmaj=3.351 mas, bpa=3.351 degrees
! Estimated noise=0.365729 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000460348 Jy
! Component: 100  -  total flux cleaned = -0.000586508 Jy
! Component: 150  -  total flux cleaned = -0.000672666 Jy
! Component: 200  -  total flux cleaned = -0.000699376 Jy
! Total flux subtracted in 200 components = -0.000699376 Jy
! Clean residual min=-0.001707 max=0.001684 Jy/beam
! Clean residual mean=0.000002 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.0460819 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 31 components and 0.0460819 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084630Jy  sigma=1.220145
! Fit after  self-cal, rms=0.084709Jy  sigma=1.220041
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.56182e-05 Jy
! Component: 100  -  total flux cleaned = -8.45902e-05 Jy
! Component: 150  -  total flux cleaned = -0.000110949 Jy
! Component: 200  -  total flux cleaned = -0.000118915 Jy
! Total flux subtracted in 200 components = -0.000118915 Jy
! Clean residual min=-0.001756 max=0.001703 Jy/beam
! Clean residual mean=0.000002 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.045963 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 32 components and 0.045963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084707Jy  sigma=1.220015
! Fit after  self-cal, rms=0.084706Jy  sigma=1.219984
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084706Jy  sigma=1.219984
! Fit after  self-cal, rms=0.084213Jy  sigma=1.219904
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.444 mas, bmaj=4.583 mas, bpa=1.943 degrees
! Estimated noise=0.521071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000739396 Jy
! Component: 100  -  total flux cleaned = -0.000799789 Jy
! Component: 150  -  total flux cleaned = -0.000841596 Jy
! Component: 200  -  total flux cleaned = -0.000872056 Jy
! Total flux subtracted in 200 components = -0.000872056 Jy
! Clean residual min=-0.001995 max=0.002366 Jy/beam
! Clean residual mean=0.000006 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.0450909 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 41 components and 0.0450909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084211Jy  sigma=1.220078
! Fit after  self-cal, rms=0.084234Jy  sigma=1.219958
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000138126 Jy
! Component: 100  -  total flux cleaned = -0.00013812 Jy
! Component: 150  -  total flux cleaned = -0.000159935 Jy
! Component: 200  -  total flux cleaned = -0.000160323 Jy
! Total flux subtracted in 200 components = -0.000160323 Jy
! Clean residual min=-0.001990 max=0.002328 Jy/beam
! Clean residual mean=0.000006 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.0449306 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 44 components and 0.0449306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084236Jy  sigma=1.220073
! Fit after  self-cal, rms=0.084234Jy  sigma=1.219986
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.342 mas, bmaj=3.36 mas, bpa=3.343 degrees
! Estimated noise=0.361997 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.342 x 3.36 at 3.343 degrees (North through East)
! Clean map  min=-0.001586  max=0.044679 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.121 mas, bmaj=3.01 mas, bpa=3.949 degrees
! Estimated noise=0.583018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0357544 Jy
! Component: 100  -  total flux cleaned = 0.0438246 Jy
! Component: 150  -  total flux cleaned = 0.0455815 Jy
! Component: 200  -  total flux cleaned = 0.0460383 Jy
! Total flux subtracted in 200 components = 0.0460383 Jy
! Clean residual min=-0.003027 max=0.002985 Jy/beam
! Clean residual mean=0.000001 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 0.0460383 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0460383 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.342 mas, bmaj=3.36 mas, bpa=3.343 degrees
! Estimated noise=0.361997 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00079919 Jy
! Component: 100  -  total flux cleaned = -0.000854868 Jy
! Component: 150  -  total flux cleaned = -0.000922813 Jy
! Component: 200  -  total flux cleaned = -0.000962691 Jy
! Total flux subtracted in 200 components = -0.000962691 Jy
! Clean residual min=-0.001790 max=0.001807 Jy/beam
! Clean residual mean=0.000002 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.0450756 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 0.0450756 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.444 mas, bmaj=4.583 mas, bpa=1.943 degrees
! Estimated noise=0.521071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000221059 Jy
! Component: 100  -  total flux cleaned = -0.000223247 Jy
! Component: 150  -  total flux cleaned = -0.000222427 Jy
! Component: 200  -  total flux cleaned = -0.000222925 Jy
! Total flux subtracted in 200 components = -0.000222925 Jy
! Clean residual min=-0.002037 max=0.002337 Jy/beam
! Clean residual mean=0.000006 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.0448527 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.28468e-07 Jy
! Component: 100  -  total flux cleaned = 6.21658e-06 Jy
! Component: 150  -  total flux cleaned = 5.71697e-06 Jy
! Component: 200  -  total flux cleaned = 5.6835e-06 Jy
! Total flux subtracted in 200 components = 5.6835e-06 Jy
! Clean residual min=-0.002017 max=0.002337 Jy/beam
! Clean residual mean=0.000006 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.0448584 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 32 components and 0.0448584 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.342 mas, bmaj=3.36 mas, bpa=3.343 degrees
! Estimated noise=0.361997 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110384 Jy
! Component: 100  -  total flux cleaned = 0.000108666 Jy
! Component: 150  -  total flux cleaned = 0.000108274 Jy
! Component: 200  -  total flux cleaned = 0.000108054 Jy
! Total flux subtracted in 200 components = 0.000108054 Jy
! Clean residual min=-0.001725 max=0.001760 Jy/beam
! Clean residual mean=0.000002 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.0449664 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 37 components and 0.0449664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084235Jy  sigma=1.220011
! Fit after  self-cal, rms=0.084228Jy  sigma=1.219968
wmodel J1322+3252_C_map.mod
! Writing 37 model components to file: J1322+3252_C_map.mod
wobs   J1322+3252_C_uvs.fits
! Writing UV FITS file: J1322+3252_C_uvs.fits
wwins  J1322+3252_C_map.win
! wwins: Wrote 1 windows to J1322+3252_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000159871 Jy
! Component: 100  -  total flux cleaned = -0.000160751 Jy
! Component: 150  -  total flux cleaned = -0.000189449 Jy
! Component: 200  -  total flux cleaned = -0.000218117 Jy
! Component: 250  -  total flux cleaned = -0.000218227 Jy
! Component: 300  -  total flux cleaned = -0.00019217 Jy
! Component: 350  -  total flux cleaned = -0.000218217 Jy
! Component: 400  -  total flux cleaned = -0.000243804 Jy
! Component: 450  -  total flux cleaned = -0.000294186 Jy
! Component: 500  -  total flux cleaned = -0.000318954 Jy
! Component: 550  -  total flux cleaned = -0.000342886 Jy
! Component: 600  -  total flux cleaned = -0.000318962 Jy
! Component: 650  -  total flux cleaned = -0.000318773 Jy
! Component: 700  -  total flux cleaned = -0.000319103 Jy
! Component: 750  -  total flux cleaned = -0.000433557 Jy
! Component: 800  -  total flux cleaned = -0.000455914 Jy
! Component: 850  -  total flux cleaned = -0.000522651 Jy
! Component: 900  -  total flux cleaned = -0.000566805 Jy
! Component: 950  -  total flux cleaned = -0.000544763 Jy
! Component: 1000  -  total flux cleaned = -0.000544403 Jy
! Component: 1050  -  total flux cleaned = -0.000501455 Jy
! Component: 1100  -  total flux cleaned = -0.000501703 Jy
! Component: 1150  -  total flux cleaned = -0.000522844 Jy
! Component: 1200  -  total flux cleaned = -0.00052284 Jy
! Component: 1250  -  total flux cleaned = -0.000522767 Jy
! Component: 1300  -  total flux cleaned = -0.000502246 Jy
! Component: 1350  -  total flux cleaned = -0.000583401 Jy
! Component: 1400  -  total flux cleaned = -0.000563289 Jy
! Component: 1450  -  total flux cleaned = -0.000583235 Jy
! Component: 1500  -  total flux cleaned = -0.000543782 Jy
! Component: 1550  -  total flux cleaned = -0.000602333 Jy
! Component: 1600  -  total flux cleaned = -0.000582779 Jy
! Component: 1650  -  total flux cleaned = -0.000602146 Jy
! Component: 1700  -  total flux cleaned = -0.000563872 Jy
! Component: 1750  -  total flux cleaned = -0.000526378 Jy
! Component: 1800  -  total flux cleaned = -0.000470127 Jy
! Component: 1850  -  total flux cleaned = -0.000544521 Jy
! Component: 1900  -  total flux cleaned = -0.000415283 Jy
! Component: 1950  -  total flux cleaned = -0.000396847 Jy
! Component: 2000  -  total flux cleaned = -0.000360585 Jy
! Component: 2050  -  total flux cleaned = -0.000360473 Jy
! Component: 2100  -  total flux cleaned = -0.000216683 Jy
! Component: 2150  -  total flux cleaned = -0.000306106 Jy
! Component: 2200  -  total flux cleaned = -0.000252699 Jy
! Component: 2250  -  total flux cleaned = -0.00019979 Jy
! Component: 2300  -  total flux cleaned = -0.000147355 Jy
! Component: 2350  -  total flux cleaned = -9.54396e-05 Jy
! Component: 2400  -  total flux cleaned = -9.55449e-05 Jy
! Component: 2450  -  total flux cleaned = -9.57808e-06 Jy
! Component: 2500  -  total flux cleaned = 2.45791e-05 Jy
! Component: 2550  -  total flux cleaned = 0.000109513 Jy
! Component: 2600  -  total flux cleaned = 0.000109586 Jy
! Component: 2650  -  total flux cleaned = 0.000159857 Jy
! Component: 2700  -  total flux cleaned = 0.000243124 Jy
! Component: 2750  -  total flux cleaned = 0.000342553 Jy
! Component: 2800  -  total flux cleaned = 0.000293285 Jy
! Component: 2850  -  total flux cleaned = 0.000358907 Jy
! Component: 2900  -  total flux cleaned = 0.000391507 Jy
! Component: 2950  -  total flux cleaned = 0.000423804 Jy
! Component: 3000  -  total flux cleaned = 0.000536577 Jy
! Component: 3050  -  total flux cleaned = 0.000536297 Jy
! Component: 3100  -  total flux cleaned = 0.000616054 Jy
! Component: 3150  -  total flux cleaned = 0.000552706 Jy
! Component: 3200  -  total flux cleaned = 0.000568593 Jy
! Component: 3250  -  total flux cleaned = 0.000631305 Jy
! Component: 3300  -  total flux cleaned = 0.000709361 Jy
! Component: 3350  -  total flux cleaned = 0.000709426 Jy
! Component: 3400  -  total flux cleaned = 0.000802007 Jy
! Component: 3450  -  total flux cleaned = 0.000832433 Jy
! Component: 3500  -  total flux cleaned = 0.000847642 Jy
! Component: 3550  -  total flux cleaned = 0.000878005 Jy
! Component: 3600  -  total flux cleaned = 0.000878008 Jy
! Component: 3650  -  total flux cleaned = 0.000938147 Jy
! Component: 3700  -  total flux cleaned = 0.000997944 Jy
! Component: 3750  -  total flux cleaned = 0.00093848 Jy
! Component: 3800  -  total flux cleaned = 0.000894039 Jy
! Component: 3850  -  total flux cleaned = 0.000908833 Jy
! Component: 3900  -  total flux cleaned = 0.000967601 Jy
! Component: 3950  -  total flux cleaned = 0.000996851 Jy
! Component: 4000  -  total flux cleaned = 0.000953284 Jy
! Component: 4050  -  total flux cleaned = 0.00102555 Jy
! Total flux subtracted in 4096 components = 0.00103994 Jy
! Clean residual min=-0.000757 max=0.000797 Jy/beam
! Clean residual mean=0.000001 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.0460064 Jy
keep
! Adding 348 model components to the UV plane model.
! The established model now contains 385 components and 0.0460064 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J1322+3252_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.342 x 3.36 at 3.343 degrees (North through East)
! Clean map  min=-0.0013098  max=0.044498 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J1322+3252_C_map.fits
wmodel /scr/pima/bu007_uvs/J1322+3252_C_map.mod
! Writing 385 model components to file: /scr/pima/bu007_uvs/J1322+3252_C_map.mod
wobs   /scr/pima/bu007_uvs/J1322+3252_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J1322+3252_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J1322+3252_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bu007_uvs/J1322+3252_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0444983 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000262429 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.76925 1.76925 3.53851 7.07702 14.154 28.3081 56.6161
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.044 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  169.562 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J1322+3252_C_dfm.log closed on Sun Jun 24 02:24:00 2018