! Started logfile: /scr/pima/bu007_uvs/J1239+2950_C_dfm.log on Sun Jun 24 02:23:05 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J1239+2950_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J1239+2950_C_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.941728 visibilities/baseline/integration-bin.
! Found source: J1239+2950
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 15256 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1239+2950_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 21 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003872Jy  sigma=16.472370
! Fit after  self-cal, rms=0.927065Jy  sigma=15.232432
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.106 mas, bmaj=3.101 mas, bpa=6.679 degrees
! Estimated noise=0.578808 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0548071 Jy
! Component: 100  -  total flux cleaned = 0.0715942 Jy
! Total flux subtracted in 100 components = 0.0715942 Jy
! Clean residual min=-0.003881 max=0.007585 Jy/beam
! Clean residual mean=-0.000004 rms=0.000944 Jy/beam
! Combined flux in latest and established models = 0.0715942 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0715942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086805Jy  sigma=1.353195
! Fit after  self-cal, rms=0.085867Jy  sigma=1.337473
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00952631 Jy
! Component: 100  -  total flux cleaned = 0.0148422 Jy
! Total flux subtracted in 100 components = 0.0148422 Jy
! Clean residual min=-0.003401 max=0.004325 Jy/beam
! Clean residual mean=-0.000001 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.0864365 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 0.0864365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084543Jy  sigma=1.316273
! Fit after  self-cal, rms=0.084441Jy  sigma=1.315617
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.363 mas, bmaj=3.443 mas, bpa=5.53 degrees
! Estimated noise=0.364518 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, 0.3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00507802 Jy
! Component: 100  -  total flux cleaned = 0.00788121 Jy
! Component: 150  -  total flux cleaned = 0.00956978 Jy
! Component: 200  -  total flux cleaned = 0.0104029 Jy
! Total flux subtracted in 200 components = 0.0104029 Jy
! Clean residual min=-0.001875 max=0.001869 Jy/beam
! Clean residual mean=-0.000002 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.0968393 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 26 components and 0.0968393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084121Jy  sigma=1.310640
! Fit after  self-cal, rms=0.084068Jy  sigma=1.310129
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.363 x 3.443 at 5.53 degrees (North through East)
! Clean map  min=-0.001865  max=0.075941 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.93     HN        1.02     KP        0.98     
!   LA        1.02     MK        0.93     NL        0.98     OV        0.96     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.96     KP        1.08     
!   LA        0.95     MK        0.99     NL        0.97     OV        0.96     
!   PT        0.93     SC        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.99     KP        1.08     
!   LA        0.99     MK        0.98     NL        0.98     OV        1.01     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.12     KP        0.96     
!   LA        1.01     MK        1.09     NL        0.99     OV        1.06     
!   PT        1.05     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.07     KP        1.02     
!   LA        0.99     MK        1.00     NL        0.93     OV        0.96     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.97     HN        0.97     KP        1.02     
!   LA        0.98     MK        1.01     NL        1.01     OV        0.99     
!   PT        0.95     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        0.95     KP        1.01     
!   LA        1.04     MK        1.02     NL        0.95     OV        0.96     
!   PT        1.03     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.04     HN        0.98     KP        0.93     
!   LA        1.02     MK        1.05     NL        0.96     OV        1.00     
!   PT        1.08     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.084068Jy  sigma=1.310129
! Fit after  self-cal, rms=0.083537Jy  sigma=1.307921
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.367 mas, bmaj=3.448 mas, bpa=5.627 degrees
! Estimated noise=0.36179 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000890419 Jy
! Component: 100  -  total flux cleaned = 0.000857097 Jy
! Component: 150  -  total flux cleaned = 0.000735321 Jy
! Component: 200  -  total flux cleaned = 0.000680295 Jy
! Total flux subtracted in 200 components = 0.000680295 Jy
! Clean residual min=-0.001761 max=0.001780 Jy/beam
! Clean residual mean=-0.000002 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.0975196 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 36 components and 0.0975196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083506Jy  sigma=1.307446
! Fit after  self-cal, rms=0.083520Jy  sigma=1.307265
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083520Jy  sigma=1.307265
! Fit after  self-cal, rms=0.083469Jy  sigma=1.307233
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.364 mas, bmaj=3.447 mas, bpa=5.569 degrees
! Estimated noise=0.361404 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000361751 Jy
! Component: 100  -  total flux cleaned = 0.000361461 Jy
! Component: 150  -  total flux cleaned = 0.00036151 Jy
! Component: 200  -  total flux cleaned = 0.000361635 Jy
! Total flux subtracted in 200 components = 0.000361635 Jy
! Clean residual min=-0.001784 max=0.001767 Jy/beam
! Clean residual mean=-0.000002 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.0978812 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 40 components and 0.0978812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083455Jy  sigma=1.306987
! Fit after  self-cal, rms=0.083457Jy  sigma=1.306967
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000130573 Jy
! Component: 100  -  total flux cleaned = 0.000130289 Jy
! Component: 150  -  total flux cleaned = 0.000148353 Jy
! Component: 200  -  total flux cleaned = 0.000147998 Jy
! Total flux subtracted in 200 components = 0.000147998 Jy
! Clean residual min=-0.001783 max=0.001769 Jy/beam
! Clean residual mean=-0.000002 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.0980292 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 44 components and 0.0980292 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083450Jy  sigma=1.306820
! Fit after  self-cal, rms=0.083450Jy  sigma=1.306809
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083450Jy  sigma=1.306809
! Fit after  self-cal, rms=0.083423Jy  sigma=1.304553
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.362 mas, bmaj=3.448 mas, bpa=5.499 degrees
! Estimated noise=0.360618 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.04281e-05 Jy
! Component: 100  -  total flux cleaned = -4.57249e-05 Jy
! Component: 150  -  total flux cleaned = -7.76216e-05 Jy
! Component: 200  -  total flux cleaned = -9.22242e-05 Jy
! Total flux subtracted in 200 components = -9.22242e-05 Jy
! Clean residual min=-0.001653 max=0.001769 Jy/beam
! Clean residual mean=-0.000003 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.097937 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 49 components and 0.097937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083416Jy  sigma=1.304448
! Fit after  self-cal, rms=0.083438Jy  sigma=1.304297
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.1481e-05 Jy
! Component: 100  -  total flux cleaned = 2.79128e-05 Jy
! Component: 150  -  total flux cleaned = 1.47132e-05 Jy
! Component: 200  -  total flux cleaned = 2.73351e-05 Jy
! Total flux subtracted in 200 components = 2.73351e-05 Jy
! Clean residual min=-0.001641 max=0.001778 Jy/beam
! Clean residual mean=-0.000003 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.0979643 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 52 components and 0.0979643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083434Jy  sigma=1.304226
! Fit after  self-cal, rms=0.083436Jy  sigma=1.304223
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083436Jy  sigma=1.304223
! Fit after  self-cal, rms=0.083436Jy  sigma=1.304205
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.441 mas, bmaj=4.785 mas, bpa=1.903 degrees
! Estimated noise=0.511312 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.22564e-05 Jy
! Component: 100  -  total flux cleaned = 7.32768e-05 Jy
! Component: 150  -  total flux cleaned = 0.000107833 Jy
! Component: 200  -  total flux cleaned = 0.000115464 Jy
! Total flux subtracted in 200 components = 0.000115464 Jy
! Clean residual min=-0.002431 max=0.002396 Jy/beam
! Clean residual mean=-0.000009 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.0980798 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 60 components and 0.0980798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083435Jy  sigma=1.304219
! Fit after  self-cal, rms=0.083439Jy  sigma=1.304209
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.66688e-05 Jy
! Component: 100  -  total flux cleaned = -1.25831e-05 Jy
! Component: 150  -  total flux cleaned = -1.0127e-07 Jy
! Component: 200  -  total flux cleaned = 5.66034e-06 Jy
! Total flux subtracted in 200 components = 5.66034e-06 Jy
! Clean residual min=-0.002422 max=0.002384 Jy/beam
! Clean residual mean=-0.000009 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 0.0980855 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 63 components and 0.0980855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083438Jy  sigma=1.304227
! Fit after  self-cal, rms=0.083439Jy  sigma=1.304225
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.361 mas, bmaj=3.448 mas, bpa=5.47 degrees
! Estimated noise=0.360371 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.361 x 3.448 at 5.47 degrees (North through East)
! Clean map  min=-0.0015549  max=0.075337 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.107 mas, bmaj=3.111 mas, bpa=6.529 degrees
! Estimated noise=0.569967 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0539923 Jy
! Component: 100  -  total flux cleaned = 0.0715689 Jy
! Component: 150  -  total flux cleaned = 0.0809468 Jy
! Component: 200  -  total flux cleaned = 0.0870256 Jy
! Total flux subtracted in 200 components = 0.0870256 Jy
! Clean residual min=-0.003243 max=0.003508 Jy/beam
! Clean residual mean=-0.000001 rms=0.000766 Jy/beam
! Combined flux in latest and established models = 0.0870257 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.0870257 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.361 mas, bmaj=3.448 mas, bpa=5.47 degrees
! Estimated noise=0.360371 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.004993 Jy
! Component: 100  -  total flux cleaned = 0.007918 Jy
! Component: 150  -  total flux cleaned = 0.00961281 Jy
! Component: 200  -  total flux cleaned = 0.0102468 Jy
! Total flux subtracted in 200 components = 0.0102468 Jy
! Clean residual min=-0.001751 max=0.001866 Jy/beam
! Clean residual mean=-0.000004 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.0972725 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 25 components and 0.0972725 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.441 mas, bmaj=4.785 mas, bpa=1.903 degrees
! Estimated noise=0.511312 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000674735 Jy
! Component: 100  -  total flux cleaned = 0.000652234 Jy
! Component: 150  -  total flux cleaned = 0.000630517 Jy
! Component: 200  -  total flux cleaned = 0.000667179 Jy
! Total flux subtracted in 200 components = 0.000667179 Jy
! Clean residual min=-0.002425 max=0.002361 Jy/beam
! Clean residual mean=-0.000009 rms=0.000639 Jy/beam
! Combined flux in latest and established models = 0.0979396 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.65202e-05 Jy
! Component: 100  -  total flux cleaned = 4.55981e-05 Jy
! Component: 150  -  total flux cleaned = 7.11061e-05 Jy
! Component: 200  -  total flux cleaned = 9.31021e-05 Jy
! Total flux subtracted in 200 components = 9.31021e-05 Jy
! Clean residual min=-0.002418 max=0.002374 Jy/beam
! Clean residual mean=-0.000009 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.0980327 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 46 components and 0.0980328 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.361 mas, bmaj=3.448 mas, bpa=5.47 degrees
! Estimated noise=0.360371 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000496305 Jy
! Component: 100  -  total flux cleaned = -0.000384224 Jy
! Component: 150  -  total flux cleaned = -0.000308063 Jy
! Component: 200  -  total flux cleaned = -0.000239253 Jy
! Total flux subtracted in 200 components = -0.000239253 Jy
! Clean residual min=-0.001684 max=0.001843 Jy/beam
! Clean residual mean=-0.000003 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.0977935 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 53 components and 0.0977935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083459Jy  sigma=1.304623
! Fit after  self-cal, rms=0.083456Jy  sigma=1.304578
wmodel J1239+2950_C_map.mod
! Writing 53 model components to file: J1239+2950_C_map.mod
wobs   J1239+2950_C_uvs.fits
! Writing UV FITS file: J1239+2950_C_uvs.fits
wwins  J1239+2950_C_map.win
! wwins: Wrote 2 windows to J1239+2950_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000275496 Jy
! Component: 100  -  total flux cleaned = 0.000397798 Jy
! Component: 150  -  total flux cleaned = 0.000486529 Jy
! Component: 200  -  total flux cleaned = 0.000599819 Jy
! Component: 250  -  total flux cleaned = 0.000599738 Jy
! Component: 300  -  total flux cleaned = 0.000626858 Jy
! Component: 350  -  total flux cleaned = 0.000627316 Jy
! Component: 400  -  total flux cleaned = 0.000601767 Jy
! Component: 450  -  total flux cleaned = 0.000475772 Jy
! Component: 500  -  total flux cleaned = 0.000426521 Jy
! Component: 550  -  total flux cleaned = 0.000304811 Jy
! Component: 600  -  total flux cleaned = 0.000233157 Jy
! Component: 650  -  total flux cleaned = 0.000162485 Jy
! Component: 700  -  total flux cleaned = 0.000116103 Jy
! Component: 750  -  total flux cleaned = 7.02644e-05 Jy
! Component: 800  -  total flux cleaned = 2.65991e-06 Jy
! Component: 850  -  total flux cleaned = -8.60659e-05 Jy
! Component: 900  -  total flux cleaned = -0.000151717 Jy
! Component: 950  -  total flux cleaned = -0.000216598 Jy
! Component: 1000  -  total flux cleaned = -0.000238124 Jy
! Component: 1050  -  total flux cleaned = -0.000301347 Jy
! Component: 1100  -  total flux cleaned = -0.000280647 Jy
! Component: 1150  -  total flux cleaned = -0.000363911 Jy
! Component: 1200  -  total flux cleaned = -0.000466101 Jy
! Component: 1250  -  total flux cleaned = -0.000546639 Jy
! Component: 1300  -  total flux cleaned = -0.000566495 Jy
! Component: 1350  -  total flux cleaned = -0.000625576 Jy
! Component: 1400  -  total flux cleaned = -0.000703725 Jy
! Component: 1450  -  total flux cleaned = -0.000723143 Jy
! Component: 1500  -  total flux cleaned = -0.000742194 Jy
! Component: 1550  -  total flux cleaned = -0.000817979 Jy
! Component: 1600  -  total flux cleaned = -0.000874249 Jy
! Component: 1650  -  total flux cleaned = -0.000836944 Jy
! Component: 1700  -  total flux cleaned = -0.00096588 Jy
! Component: 1750  -  total flux cleaned = -0.000947464 Jy
! Component: 1800  -  total flux cleaned = -0.00100162 Jy
! Component: 1850  -  total flux cleaned = -0.00101953 Jy
! Component: 1900  -  total flux cleaned = -0.00110835 Jy
! Component: 1950  -  total flux cleaned = -0.00112596 Jy
! Component: 2000  -  total flux cleaned = -0.00117833 Jy
! Component: 2050  -  total flux cleaned = -0.00121287 Jy
! Component: 2100  -  total flux cleaned = -0.00124719 Jy
! Component: 2150  -  total flux cleaned = -0.00124739 Jy
! Component: 2200  -  total flux cleaned = -0.00129797 Jy
! Component: 2250  -  total flux cleaned = -0.00129789 Jy
! Component: 2300  -  total flux cleaned = -0.00124782 Jy
! Component: 2350  -  total flux cleaned = -0.00123118 Jy
! Component: 2400  -  total flux cleaned = -0.0011982 Jy
! Component: 2450  -  total flux cleaned = -0.0011818 Jy
! Component: 2500  -  total flux cleaned = -0.00111703 Jy
! Component: 2550  -  total flux cleaned = -0.001101 Jy
! Component: 2600  -  total flux cleaned = -0.00108507 Jy
! Component: 2650  -  total flux cleaned = -0.00110096 Jy
! Component: 2700  -  total flux cleaned = -0.00110108 Jy
! Component: 2750  -  total flux cleaned = -0.00113236 Jy
! Component: 2800  -  total flux cleaned = -0.00100768 Jy
! Component: 2850  -  total flux cleaned = -0.00108521 Jy
! Component: 2900  -  total flux cleaned = -0.000977462 Jy
! Component: 2950  -  total flux cleaned = -0.00102339 Jy
! Component: 3000  -  total flux cleaned = -0.000947488 Jy
! Component: 3050  -  total flux cleaned = -0.000992808 Jy
! Component: 3100  -  total flux cleaned = -0.000932703 Jy
! Component: 3150  -  total flux cleaned = -0.000888065 Jy
! Component: 3200  -  total flux cleaned = -0.000873391 Jy
! Component: 3250  -  total flux cleaned = -0.000917564 Jy
! Component: 3300  -  total flux cleaned = -0.000814843 Jy
! Component: 3350  -  total flux cleaned = -0.000785602 Jy
! Component: 3400  -  total flux cleaned = -0.000684221 Jy
! Component: 3450  -  total flux cleaned = -0.00065543 Jy
! Component: 3500  -  total flux cleaned = -0.000598047 Jy
! Component: 3550  -  total flux cleaned = -0.000569562 Jy
! Component: 3600  -  total flux cleaned = -0.000555266 Jy
! Component: 3650  -  total flux cleaned = -0.000470504 Jy
! Component: 3700  -  total flux cleaned = -0.000442422 Jy
! Component: 3750  -  total flux cleaned = -0.000358489 Jy
! Component: 3800  -  total flux cleaned = -0.000288974 Jy
! Component: 3850  -  total flux cleaned = -0.000206105 Jy
! Component: 3900  -  total flux cleaned = -0.000123592 Jy
! Component: 3950  -  total flux cleaned = -5.51821e-05 Jy
! Component: 4000  -  total flux cleaned = -2.79768e-05 Jy
! Component: 4050  -  total flux cleaned = 0.000107536 Jy
! Total flux subtracted in 4096 components = 9.39963e-05 Jy
! Clean residual min=-0.000673 max=0.000786 Jy/beam
! Clean residual mean=-0.000001 rms=0.000246 Jy/beam
! Combined flux in latest and established models = 0.0978875 Jy
keep
! Adding 333 model components to the UV plane model.
! The established model now contains 386 components and 0.0978875 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J1239+2950_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.361 x 3.448 at 5.47 degrees (North through East)
! Clean map  min=-0.0012  max=0.075121 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J1239+2950_C_map.fits
wmodel /scr/pima/bu007_uvs/J1239+2950_C_map.mod
! Writing 386 model components to file: /scr/pima/bu007_uvs/J1239+2950_C_map.mod
wobs   /scr/pima/bu007_uvs/J1239+2950_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J1239+2950_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J1239+2950_C_map.win
! wwins: Wrote 3 windows to /scr/pima/bu007_uvs/J1239+2950_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0751214 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000245912 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.982057 0.982057 1.96411 3.92823 7.85646 15.7129 31.4258 62.8517
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.075 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  305.481 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J1239+2950_C_dfm.log closed on Sun Jun 24 02:23:09 2018