! Started logfile: /scr/pima/bu007_uvs/J1111+3252_C_dfm.log on Sun Jun 24 02:20:59 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J1111+3252_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J1111+3252_C_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.922459 visibilities/baseline/integration-bin.
! Found source: J1111+3252
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 15608 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1111+3252_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015552Jy  sigma=13.837847
! Fit after  self-cal, rms=0.882833Jy  sigma=12.095717
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.139 mas, bmaj=3.319 mas, bpa=12.28 degrees
! Estimated noise=0.702308 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0859026 Jy
! Component: 100  -  total flux cleaned = 0.11513 Jy
! Total flux subtracted in 100 components = 0.11513 Jy
! Clean residual min=-0.005516 max=0.014101 Jy/beam
! Clean residual mean=-0.000010 rms=0.001429 Jy/beam
! Combined flux in latest and established models = 0.11513 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.11513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.095202Jy  sigma=1.232278
! Fit after  self-cal, rms=0.094877Jy  sigma=1.229143
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0171507 Jy
! Component: 100  -  total flux cleaned = 0.0265607 Jy
! Total flux subtracted in 100 components = 0.0265607 Jy
! Clean residual min=-0.004372 max=0.006056 Jy/beam
! Clean residual mean=-0.000005 rms=0.001063 Jy/beam
! Combined flux in latest and established models = 0.141691 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 9 components and 0.141691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090836Jy  sigma=1.173434
! Fit after  self-cal, rms=0.090701Jy  sigma=1.172187
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.383 mas, bmaj=3.59 mas, bpa=12.78 degrees
! Estimated noise=0.450016 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.8, 0.3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00927779 Jy
! Component: 100  -  total flux cleaned = 0.0140825 Jy
! Component: 150  -  total flux cleaned = 0.0169742 Jy
! Component: 200  -  total flux cleaned = 0.0189878 Jy
! Total flux subtracted in 200 components = 0.0189878 Jy
! Clean residual min=-0.002610 max=0.002216 Jy/beam
! Clean residual mean=-0.000006 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.160679 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 26 components and 0.160679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.089764Jy  sigma=1.159039
! Fit after  self-cal, rms=0.089688Jy  sigma=1.158127
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.383 x 3.59 at 12.78 degrees (North through East)
! Clean map  min=-0.002494  max=0.11895 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.01     KP        1.01     
!   LA        1.07     MK        1.03     NL        1.00     OV        1.02     
!   PT        0.94     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        0.96     KP        0.96     
!   LA        0.97     MK        0.93     NL        0.98     OV        0.97     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.95     HN        1.01     KP        0.96     
!   LA        0.97     MK        1.00     NL        1.05     OV        1.00     
!   PT        1.04     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        0.98     KP        1.03     
!   LA        0.97     MK        1.06     NL        1.02     OV        0.94     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        0.99     KP        0.97     
!   LA        0.97     MK        1.04     NL        1.01     OV        1.00     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.05     HN        1.01     KP        1.03     
!   LA        0.93     MK        0.95     NL        1.02     OV        1.00     
!   PT        0.95     SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        1.05     KP        1.02     
!   LA        0.97     MK        1.02     NL        1.07     OV        1.05     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.02     KP        0.94     
!   LA        1.02     MK        0.99     NL        0.98     OV        0.97     
!   PT        1.00     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.089688Jy  sigma=1.158127
! Fit after  self-cal, rms=0.089083Jy  sigma=1.154781
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.384 mas, bmaj=3.606 mas, bpa=12.81 degrees
! Estimated noise=0.445344 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00134349 Jy
! Component: 100  -  total flux cleaned = 0.0017127 Jy
! Component: 150  -  total flux cleaned = 0.00180869 Jy
! Component: 200  -  total flux cleaned = 0.00186344 Jy
! Total flux subtracted in 200 components = 0.00186344 Jy
! Clean residual min=-0.002174 max=0.002088 Jy/beam
! Clean residual mean=-0.000002 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.162542 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 38 components and 0.162542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.089044Jy  sigma=1.154229
! Fit after  self-cal, rms=0.089074Jy  sigma=1.154099
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.089074Jy  sigma=1.154099
! Fit after  self-cal, rms=0.088969Jy  sigma=1.154051
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.38 mas, bmaj=3.602 mas, bpa=12.83 degrees
! Estimated noise=0.444503 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000650266 Jy
! Component: 100  -  total flux cleaned = 0.000725598 Jy
! Component: 150  -  total flux cleaned = 0.000769965 Jy
! Component: 200  -  total flux cleaned = 0.000749332 Jy
! Total flux subtracted in 200 components = 0.000749332 Jy
! Clean residual min=-0.002184 max=0.002057 Jy/beam
! Clean residual mean=-0.000002 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.163292 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 46 components and 0.163292 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088955Jy  sigma=1.153858
! Fit after  self-cal, rms=0.088957Jy  sigma=1.153840
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109202 Jy
! Component: 100  -  total flux cleaned = 9.11993e-05 Jy
! Component: 150  -  total flux cleaned = 7.54539e-05 Jy
! Component: 200  -  total flux cleaned = 5.98881e-05 Jy
! Total flux subtracted in 200 components = 5.98881e-05 Jy
! Clean residual min=-0.002192 max=0.002057 Jy/beam
! Clean residual mean=-0.000002 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.163352 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 53 components and 0.163352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088950Jy  sigma=1.153757
! Fit after  self-cal, rms=0.088949Jy  sigma=1.153752
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088949Jy  sigma=1.153752
! Fit after  self-cal, rms=0.088636Jy  sigma=1.151431
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.374 mas, bmaj=3.603 mas, bpa=12.75 degrees
! Estimated noise=0.44268 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.68663e-05 Jy
! Component: 100  -  total flux cleaned = 1.58089e-05 Jy
! Component: 150  -  total flux cleaned = -4.65894e-05 Jy
! Component: 200  -  total flux cleaned = -7.54575e-05 Jy
! Total flux subtracted in 200 components = -7.54575e-05 Jy
! Clean residual min=-0.002119 max=0.001866 Jy/beam
! Clean residual mean=-0.000001 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.163276 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 62 components and 0.163276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088627Jy  sigma=1.151356
! Fit after  self-cal, rms=0.088643Jy  sigma=1.151286
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.46035e-05 Jy
! Component: 100  -  total flux cleaned = -7.26303e-06 Jy
! Component: 150  -  total flux cleaned = -4.22716e-05 Jy
! Component: 200  -  total flux cleaned = -6.41261e-05 Jy
! Total flux subtracted in 200 components = -6.41261e-05 Jy
! Clean residual min=-0.002115 max=0.001879 Jy/beam
! Clean residual mean=-0.000001 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.163212 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 68 components and 0.163212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088639Jy  sigma=1.151255
! Fit after  self-cal, rms=0.088639Jy  sigma=1.151251
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088639Jy  sigma=1.151251
! Fit after  self-cal, rms=0.088324Jy  sigma=1.151216
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.477 mas, bmaj=4.953 mas, bpa=8.645 degrees
! Estimated noise=0.615955 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.13752e-05 Jy
! Component: 100  -  total flux cleaned = -7.28399e-05 Jy
! Component: 150  -  total flux cleaned = -8.90883e-05 Jy
! Component: 200  -  total flux cleaned = -0.000140262 Jy
! Total flux subtracted in 200 components = -0.000140262 Jy
! Clean residual min=-0.002366 max=0.002386 Jy/beam
! Clean residual mean=-0.000002 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.163072 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 85 components and 0.163072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088330Jy  sigma=1.151319
! Fit after  self-cal, rms=0.088330Jy  sigma=1.151249
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.94078e-05 Jy
! Component: 100  -  total flux cleaned = 4.87636e-05 Jy
! Component: 150  -  total flux cleaned = 4.85807e-05 Jy
! Component: 200  -  total flux cleaned = 4.85992e-05 Jy
! Total flux subtracted in 200 components = 4.85992e-05 Jy
! Clean residual min=-0.002364 max=0.002366 Jy/beam
! Clean residual mean=-0.000002 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.16312 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 90 components and 0.16312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088334Jy  sigma=1.151339
! Fit after  self-cal, rms=0.088331Jy  sigma=1.151304
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.371 mas, bmaj=3.602 mas, bpa=12.72 degrees
! Estimated noise=0.44094 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.371 x 3.602 at 12.72 degrees (North through East)
! Clean map  min=-0.0020263  max=0.11657 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.133 mas, bmaj=3.332 mas, bpa=12.29 degrees
! Estimated noise=0.682245 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0832496 Jy
! Component: 100  -  total flux cleaned = 0.114168 Jy
! Component: 150  -  total flux cleaned = 0.13116 Jy
! Component: 200  -  total flux cleaned = 0.14102 Jy
! Total flux subtracted in 200 components = 0.14102 Jy
! Clean residual min=-0.004121 max=0.005299 Jy/beam
! Clean residual mean=-0.000004 rms=0.001016 Jy/beam
! Combined flux in latest and established models = 0.141021 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.141021 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.371 mas, bmaj=3.602 mas, bpa=12.72 degrees
! Estimated noise=0.44094 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00939907 Jy
! Component: 100  -  total flux cleaned = 0.0143203 Jy
! Component: 150  -  total flux cleaned = 0.0172126 Jy
! Component: 200  -  total flux cleaned = 0.019176 Jy
! Total flux subtracted in 200 components = 0.019176 Jy
! Clean residual min=-0.002301 max=0.002029 Jy/beam
! Clean residual mean=-0.000003 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.160197 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 34 components and 0.160197 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.477 mas, bmaj=4.953 mas, bpa=8.645 degrees
! Estimated noise=0.615955 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223811 Jy
! Component: 100  -  total flux cleaned = 0.00247265 Jy
! Component: 150  -  total flux cleaned = 0.00254119 Jy
! Component: 200  -  total flux cleaned = 0.00262563 Jy
! Total flux subtracted in 200 components = 0.00262563 Jy
! Clean residual min=-0.002427 max=0.002388 Jy/beam
! Clean residual mean=-0.000002 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.162822 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.58061e-05 Jy
! Component: 100  -  total flux cleaned = 0.000157984 Jy
! Component: 150  -  total flux cleaned = 0.000230355 Jy
! Component: 200  -  total flux cleaned = 0.000262942 Jy
! Total flux subtracted in 200 components = 0.000262942 Jy
! Clean residual min=-0.002398 max=0.002360 Jy/beam
! Clean residual mean=-0.000002 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.163085 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 62 components and 0.163085 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.371 mas, bmaj=3.602 mas, bpa=12.72 degrees
! Estimated noise=0.44094 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.73664e-05 Jy
! Component: 100  -  total flux cleaned = 0.000275611 Jy
! Component: 150  -  total flux cleaned = 0.000276036 Jy
! Component: 200  -  total flux cleaned = 0.000302183 Jy
! Total flux subtracted in 200 components = 0.000302183 Jy
! Clean residual min=-0.002116 max=0.001910 Jy/beam
! Clean residual mean=-0.000001 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.163387 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 74 components and 0.163387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088329Jy  sigma=1.151407
! Fit after  self-cal, rms=0.088324Jy  sigma=1.151355
wmodel J1111+3252_C_map.mod
! Writing 74 model components to file: J1111+3252_C_map.mod
wobs   J1111+3252_C_uvs.fits
! Writing UV FITS file: J1111+3252_C_uvs.fits
wwins  J1111+3252_C_map.win
! wwins: Wrote 2 windows to J1111+3252_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000688457 Jy
! Component: 100  -  total flux cleaned = -0.000723011 Jy
! Component: 150  -  total flux cleaned = -0.000820558 Jy
! Component: 200  -  total flux cleaned = -0.000756808 Jy
! Component: 250  -  total flux cleaned = -0.000757255 Jy
! Component: 300  -  total flux cleaned = -0.000847111 Jy
! Component: 350  -  total flux cleaned = -0.000817765 Jy
! Component: 400  -  total flux cleaned = -0.00093324 Jy
! Component: 450  -  total flux cleaned = -0.00093366 Jy
! Component: 500  -  total flux cleaned = -0.00104475 Jy
! Component: 550  -  total flux cleaned = -0.00112618 Jy
! Component: 600  -  total flux cleaned = -0.00112558 Jy
! Component: 650  -  total flux cleaned = -0.00120467 Jy
! Component: 700  -  total flux cleaned = -0.00120445 Jy
! Component: 750  -  total flux cleaned = -0.00123003 Jy
! Component: 800  -  total flux cleaned = -0.0011292 Jy
! Component: 850  -  total flux cleaned = -0.00115431 Jy
! Component: 900  -  total flux cleaned = -0.00112961 Jy
! Component: 950  -  total flux cleaned = -0.00100784 Jy
! Component: 1000  -  total flux cleaned = -0.00105605 Jy
! Component: 1050  -  total flux cleaned = -0.00100788 Jy
! Component: 1100  -  total flux cleaned = -0.000983986 Jy
! Component: 1150  -  total flux cleaned = -0.000913755 Jy
! Component: 1200  -  total flux cleaned = -0.000936321 Jy
! Component: 1250  -  total flux cleaned = -0.00084407 Jy
! Component: 1300  -  total flux cleaned = -0.000798583 Jy
! Component: 1350  -  total flux cleaned = -0.00079824 Jy
! Component: 1400  -  total flux cleaned = -0.00077586 Jy
! Component: 1450  -  total flux cleaned = -0.000687548 Jy
! Component: 1500  -  total flux cleaned = -0.00068773 Jy
! Component: 1550  -  total flux cleaned = -0.000731107 Jy
! Component: 1600  -  total flux cleaned = -0.000709682 Jy
! Component: 1650  -  total flux cleaned = -0.000645551 Jy
! Component: 1700  -  total flux cleaned = -0.000709271 Jy
! Component: 1750  -  total flux cleaned = -0.000645939 Jy
! Component: 1800  -  total flux cleaned = -0.000604461 Jy
! Component: 1850  -  total flux cleaned = -0.00064571 Jy
! Component: 1900  -  total flux cleaned = -0.00056346 Jy
! Component: 1950  -  total flux cleaned = -0.000542849 Jy
! Component: 2000  -  total flux cleaned = -0.000542899 Jy
! Component: 2050  -  total flux cleaned = -0.000482285 Jy
! Component: 2100  -  total flux cleaned = -0.000542366 Jy
! Component: 2150  -  total flux cleaned = -0.000542333 Jy
! Component: 2200  -  total flux cleaned = -0.0004831 Jy
! Component: 2250  -  total flux cleaned = -0.000542063 Jy
! Component: 2300  -  total flux cleaned = -0.000581193 Jy
! Component: 2350  -  total flux cleaned = -0.000581121 Jy
! Component: 2400  -  total flux cleaned = -0.000581158 Jy
! Component: 2450  -  total flux cleaned = -0.00058115 Jy
! Component: 2500  -  total flux cleaned = -0.000524189 Jy
! Component: 2550  -  total flux cleaned = -0.000618521 Jy
! Component: 2600  -  total flux cleaned = -0.000637406 Jy
! Component: 2650  -  total flux cleaned = -0.000562658 Jy
! Component: 2700  -  total flux cleaned = -0.000544139 Jy
! Component: 2750  -  total flux cleaned = -0.000451984 Jy
! Component: 2800  -  total flux cleaned = -0.000543579 Jy
! Component: 2850  -  total flux cleaned = -0.000543644 Jy
! Component: 2900  -  total flux cleaned = -0.000453111 Jy
! Component: 2950  -  total flux cleaned = -0.000525119 Jy
! Component: 3000  -  total flux cleaned = -0.00054296 Jy
! Component: 3050  -  total flux cleaned = -0.000471666 Jy
! Component: 3100  -  total flux cleaned = -0.000489357 Jy
! Component: 3150  -  total flux cleaned = -0.000489301 Jy
! Component: 3200  -  total flux cleaned = -0.000471764 Jy
! Component: 3250  -  total flux cleaned = -0.000436866 Jy
! Component: 3300  -  total flux cleaned = -0.000454249 Jy
! Component: 3350  -  total flux cleaned = -0.000454264 Jy
! Component: 3400  -  total flux cleaned = -0.000402664 Jy
! Component: 3450  -  total flux cleaned = -0.000334594 Jy
! Component: 3500  -  total flux cleaned = -0.000385459 Jy
! Component: 3550  -  total flux cleaned = -0.000351537 Jy
! Component: 3600  -  total flux cleaned = -0.000317748 Jy
! Component: 3650  -  total flux cleaned = -0.000267542 Jy
! Component: 3700  -  total flux cleaned = -0.00013427 Jy
! Component: 3750  -  total flux cleaned = -0.000117735 Jy
! Component: 3800  -  total flux cleaned = -1.88455e-05 Jy
! Component: 3850  -  total flux cleaned = 9.58851e-05 Jy
! Component: 3900  -  total flux cleaned = 9.58432e-05 Jy
! Component: 3950  -  total flux cleaned = 0.000128449 Jy
! Component: 4000  -  total flux cleaned = 0.000176929 Jy
! Component: 4050  -  total flux cleaned = 0.000144689 Jy
! Total flux subtracted in 4096 components = 0.00022491 Jy
! Clean residual min=-0.000947 max=0.000830 Jy/beam
! Clean residual mean=-0.000001 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.163612 Jy
keep
! Adding 357 model components to the UV plane model.
! The established model now contains 431 components and 0.163612 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J1111+3252_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.371 x 3.602 at 12.72 degrees (North through East)
! Clean map  min=-0.0015229  max=0.11606 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J1111+3252_C_map.fits
wmodel /scr/pima/bu007_uvs/J1111+3252_C_map.mod
! Writing 431 model components to file: /scr/pima/bu007_uvs/J1111+3252_C_map.mod
wobs   /scr/pima/bu007_uvs/J1111+3252_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J1111+3252_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J1111+3252_C_map.win
! wwins: Wrote 3 windows to /scr/pima/bu007_uvs/J1111+3252_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.116056 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000286806 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.741379 0.741379 1.48276 2.96552 5.93103 11.8621 23.7241 47.4482 94.8965
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.116 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  404.651 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J1111+3252_C_dfm.log closed on Sun Jun 24 02:21:03 2018