! Started logfile: /scr/pima/bu007_uvs/J1105+3207_C_dfm.log on Sun Jun 24 02:20:50 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J1105+3207_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J1105+3207_C_uva.fits
! AN table 1: 49 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.973696 visibilities/baseline/integration-bin.
! Found source: J1105+3207
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 17176 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1105+3207_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005275Jy  sigma=16.440439
! Fit after  self-cal, rms=0.932766Jy  sigma=15.252779
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.098 mas, bmaj=3.522 mas, bpa=15.53 degrees
! Estimated noise=0.605812 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0519997 Jy
! Component: 100  -  total flux cleaned = 0.0649081 Jy
! Total flux subtracted in 100 components = 0.0649081 Jy
! Clean residual min=-0.003441 max=0.005563 Jy/beam
! Clean residual mean=-0.000008 rms=0.000916 Jy/beam
! Combined flux in latest and established models = 0.0649081 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0649081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088707Jy  sigma=1.394176
! Fit after  self-cal, rms=0.087452Jy  sigma=1.375430
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00746779 Jy
! Component: 100  -  total flux cleaned = 0.011534 Jy
! Total flux subtracted in 100 components = 0.011534 Jy
! Clean residual min=-0.003562 max=0.003070 Jy/beam
! Clean residual mean=-0.000004 rms=0.000767 Jy/beam
! Combined flux in latest and established models = 0.0764421 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 11 components and 0.0764421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086577Jy  sigma=1.360516
! Fit after  self-cal, rms=0.086506Jy  sigma=1.360079
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.405 mas, bmaj=3.79 mas, bpa=14.81 degrees
! Estimated noise=0.336354 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00433911 Jy
! Component: 100  -  total flux cleaned = 0.00645067 Jy
! Component: 150  -  total flux cleaned = 0.00776713 Jy
! Component: 200  -  total flux cleaned = 0.00865383 Jy
! Total flux subtracted in 200 components = 0.00865383 Jy
! Clean residual min=-0.002052 max=0.001860 Jy/beam
! Clean residual mean=-0.000002 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.0850959 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 23 components and 0.0850959 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086308Jy  sigma=1.356526
! Fit after  self-cal, rms=0.086286Jy  sigma=1.356297
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.405 x 3.79 at 14.81 degrees (North through East)
! Clean map  min=-0.001982  max=0.072415 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        0.94     KP        0.91     
!   LA        1.06     MK        1.04     NL        1.01     OV        0.95     
!   PT        1.06     SC        1.03     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.92     KP        1.00     
!   LA        0.92     MK        1.04     NL        1.03     OV        1.05     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.99     KP        0.96     
!   LA        1.01     MK        0.97     NL        1.03     OV        0.99     
!   PT        0.97     SC        1.08     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.14     KP        0.98     
!   LA        0.97     MK        1.11     NL        1.00     OV        0.90     
!   PT        1.01     SC        1.03     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.95     KP        0.94     
!   LA        1.05     MK        1.11     NL        0.94     OV        1.01     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        0.93     KP        0.98     
!   LA        0.99     MK        1.06     NL        1.05     OV        0.96     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        0.98     KP        0.96     
!   LA        1.04     MK        0.98     NL        0.96     OV        1.03     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.10     HN        1.07     KP        0.97     
!   LA        1.01     MK        0.99     NL        0.98     OV        0.99     
!   PT        1.03     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.086286Jy  sigma=1.356297
! Fit after  self-cal, rms=0.086079Jy  sigma=1.353570
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.415 mas, bmaj=3.802 mas, bpa=14.76 degrees
! Estimated noise=0.335918 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000164232 Jy
! Component: 100  -  total flux cleaned = 1.6425e-05 Jy
! Component: 150  -  total flux cleaned = 4.60596e-05 Jy
! Component: 200  -  total flux cleaned = 4.59292e-05 Jy
! Total flux subtracted in 200 components = 4.59292e-05 Jy
! Clean residual min=-0.001899 max=0.001783 Jy/beam
! Clean residual mean=-0.000001 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.0851419 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 31 components and 0.0851419 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086071Jy  sigma=1.353439
! Fit after  self-cal, rms=0.086111Jy  sigma=1.353249
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086111Jy  sigma=1.353249
! Fit after  self-cal, rms=0.085992Jy  sigma=1.353228
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.416 mas, bmaj=3.801 mas, bpa=14.74 degrees
! Estimated noise=0.335199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.28645e-05 Jy
! Component: 100  -  total flux cleaned = 2.22301e-05 Jy
! Component: 150  -  total flux cleaned = 2.17284e-05 Jy
! Component: 200  -  total flux cleaned = 4.21559e-05 Jy
! Total flux subtracted in 200 components = 4.21559e-05 Jy
! Clean residual min=-0.001903 max=0.001754 Jy/beam
! Clean residual mean=-0.000001 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.085184 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 33 components and 0.0851841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085988Jy  sigma=1.353168
! Fit after  self-cal, rms=0.085984Jy  sigma=1.353111
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.18303e-05 Jy
! Component: 100  -  total flux cleaned = 6.13403e-05 Jy
! Component: 150  -  total flux cleaned = 7.86959e-05 Jy
! Component: 200  -  total flux cleaned = 8.68765e-05 Jy
! Total flux subtracted in 200 components = 8.68765e-05 Jy
! Clean residual min=-0.001887 max=0.001772 Jy/beam
! Clean residual mean=-0.000001 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.0852709 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 39 components and 0.0852709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085982Jy  sigma=1.353073
! Fit after  self-cal, rms=0.085981Jy  sigma=1.353070
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085981Jy  sigma=1.353070
! Fit after  self-cal, rms=0.086222Jy  sigma=1.353115
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.415 mas, bmaj=3.799 mas, bpa=14.76 degrees
! Estimated noise=0.336216 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000287994 Jy
! Component: 100  -  total flux cleaned = 0.000371246 Jy
! Component: 150  -  total flux cleaned = 0.000402485 Jy
! Component: 200  -  total flux cleaned = 0.000416512 Jy
! Total flux subtracted in 200 components = 0.000416512 Jy
! Clean residual min=-0.001865 max=0.001782 Jy/beam
! Clean residual mean=-0.000001 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.0856874 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 39 components and 0.0856874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086221Jy  sigma=1.353076
! Fit after  self-cal, rms=0.086219Jy  sigma=1.353066
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.29648e-05 Jy
! Component: 100  -  total flux cleaned = 4.96752e-05 Jy
! Component: 150  -  total flux cleaned = 4.96566e-05 Jy
! Component: 200  -  total flux cleaned = 5.57108e-05 Jy
! Total flux subtracted in 200 components = 5.57108e-05 Jy
! Clean residual min=-0.001875 max=0.001786 Jy/beam
! Clean residual mean=-0.000001 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.0857431 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 39 components and 0.0857432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086219Jy  sigma=1.353047
! Fit after  self-cal, rms=0.086218Jy  sigma=1.353044
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086218Jy  sigma=1.353044
! Fit after  self-cal, rms=0.086420Jy  sigma=1.353057
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.461 mas, bmaj=4.873 mas, bpa=6.236 degrees
! Estimated noise=0.459781 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000528703 Jy
! Component: 100  -  total flux cleaned = 0.000658164 Jy
! Component: 150  -  total flux cleaned = 0.00068849 Jy
! Component: 200  -  total flux cleaned = 0.000701896 Jy
! Total flux subtracted in 200 components = 0.000701896 Jy
! Clean residual min=-0.001980 max=0.001997 Jy/beam
! Clean residual mean=-0.000001 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.086445 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 41 components and 0.086445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086421Jy  sigma=1.353073
! Fit after  self-cal, rms=0.086421Jy  sigma=1.353050
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.20681e-05 Jy
! Component: 100  -  total flux cleaned = 4.66061e-05 Jy
! Component: 150  -  total flux cleaned = 5.27036e-05 Jy
! Component: 200  -  total flux cleaned = 5.28778e-05 Jy
! Total flux subtracted in 200 components = 5.28778e-05 Jy
! Clean residual min=-0.001971 max=0.001983 Jy/beam
! Clean residual mean=-0.000001 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 0.0864979 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 43 components and 0.0864979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086422Jy  sigma=1.353066
! Fit after  self-cal, rms=0.086421Jy  sigma=1.353062
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.414 mas, bmaj=3.797 mas, bpa=14.78 degrees
! Estimated noise=0.336961 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.414 x 3.797 at 14.78 degrees (North through East)
! Clean map  min=-0.001708  max=0.072279 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.108 mas, bmaj=3.515 mas, bpa=15.54 degrees
! Estimated noise=0.614733 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0524616 Jy
! Component: 100  -  total flux cleaned = 0.0664036 Jy
! Component: 150  -  total flux cleaned = 0.0735081 Jy
! Component: 200  -  total flux cleaned = 0.0775203 Jy
! Total flux subtracted in 200 components = 0.0775203 Jy
! Clean residual min=-0.003405 max=0.002976 Jy/beam
! Clean residual mean=-0.000004 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.0775203 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0775203 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.414 mas, bmaj=3.797 mas, bpa=14.78 degrees
! Estimated noise=0.336961 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00403699 Jy
! Component: 100  -  total flux cleaned = 0.00608948 Jy
! Component: 150  -  total flux cleaned = 0.00731607 Jy
! Component: 200  -  total flux cleaned = 0.00790649 Jy
! Total flux subtracted in 200 components = 0.00790649 Jy
! Clean residual min=-0.001872 max=0.001756 Jy/beam
! Clean residual mean=-0.000001 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.0854268 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 28 components and 0.0854268 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.461 mas, bmaj=4.873 mas, bpa=6.236 degrees
! Estimated noise=0.459781 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000709676 Jy
! Component: 100  -  total flux cleaned = 0.000755897 Jy
! Component: 150  -  total flux cleaned = 0.000811704 Jy
! Component: 200  -  total flux cleaned = 0.00084998 Jy
! Total flux subtracted in 200 components = 0.00084998 Jy
! Clean residual min=-0.001953 max=0.002034 Jy/beam
! Clean residual mean=-0.000001 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.0862768 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.71767e-05 Jy
! Component: 100  -  total flux cleaned = 6.77274e-05 Jy
! Component: 150  -  total flux cleaned = 8.50084e-05 Jy
! Component: 200  -  total flux cleaned = 9.65364e-05 Jy
! Total flux subtracted in 200 components = 9.65364e-05 Jy
! Clean residual min=-0.001957 max=0.002033 Jy/beam
! Clean residual mean=-0.000001 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.0863733 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 36 components and 0.0863734 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.414 mas, bmaj=3.797 mas, bpa=14.78 degrees
! Estimated noise=0.336961 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000383981 Jy
! Component: 100  -  total flux cleaned = -0.000457365 Jy
! Component: 150  -  total flux cleaned = -0.000424828 Jy
! Component: 200  -  total flux cleaned = -0.000409572 Jy
! Total flux subtracted in 200 components = -0.000409572 Jy
! Clean residual min=-0.001853 max=0.001794 Jy/beam
! Clean residual mean=-0.000001 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.0859638 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 40 components and 0.0859638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086426Jy  sigma=1.353147
! Fit after  self-cal, rms=0.086423Jy  sigma=1.353126
wmodel J1105+3207_C_map.mod
! Writing 40 model components to file: J1105+3207_C_map.mod
wobs   J1105+3207_C_uvs.fits
! Writing UV FITS file: J1105+3207_C_uvs.fits
wwins  J1105+3207_C_map.win
! wwins: Wrote 1 windows to J1105+3207_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000486826 Jy
! Component: 100  -  total flux cleaned = -0.000580878 Jy
! Component: 150  -  total flux cleaned = -0.000580904 Jy
! Component: 200  -  total flux cleaned = -0.000552981 Jy
! Component: 250  -  total flux cleaned = -0.000526422 Jy
! Component: 300  -  total flux cleaned = -0.00050077 Jy
! Component: 350  -  total flux cleaned = -0.000400471 Jy
! Component: 400  -  total flux cleaned = -0.000327468 Jy
! Component: 450  -  total flux cleaned = -0.000256659 Jy
! Component: 500  -  total flux cleaned = -0.000164407 Jy
! Component: 550  -  total flux cleaned = -2.85621e-05 Jy
! Component: 600  -  total flux cleaned = 0.000126327 Jy
! Component: 650  -  total flux cleaned = 0.000278007 Jy
! Component: 700  -  total flux cleaned = 0.000341143 Jy
! Component: 750  -  total flux cleaned = 0.000403836 Jy
! Component: 800  -  total flux cleaned = 0.000465437 Jy
! Component: 850  -  total flux cleaned = 0.000546219 Jy
! Component: 900  -  total flux cleaned = 0.000605991 Jy
! Component: 950  -  total flux cleaned = 0.000683872 Jy
! Component: 1000  -  total flux cleaned = 0.000664769 Jy
! Component: 1050  -  total flux cleaned = 0.000740555 Jy
! Component: 1100  -  total flux cleaned = 0.000740757 Jy
! Component: 1150  -  total flux cleaned = 0.00077768 Jy
! Component: 1200  -  total flux cleaned = 0.000849973 Jy
! Component: 1250  -  total flux cleaned = 0.000831848 Jy
! Component: 1300  -  total flux cleaned = 0.000867119 Jy
! Component: 1350  -  total flux cleaned = 0.000867029 Jy
! Component: 1400  -  total flux cleaned = 0.000935576 Jy
! Component: 1450  -  total flux cleaned = 0.00090185 Jy
! Component: 1500  -  total flux cleaned = 0.00103637 Jy
! Component: 1550  -  total flux cleaned = 0.00103631 Jy
! Component: 1600  -  total flux cleaned = 0.00111827 Jy
! Component: 1650  -  total flux cleaned = 0.00113441 Jy
! Component: 1700  -  total flux cleaned = 0.00116609 Jy
! Component: 1750  -  total flux cleaned = 0.00122906 Jy
! Component: 1800  -  total flux cleaned = 0.00119794 Jy
! Component: 1850  -  total flux cleaned = 0.00129085 Jy
! Component: 1900  -  total flux cleaned = 0.00136737 Jy
! Component: 1950  -  total flux cleaned = 0.00136737 Jy
! Component: 2000  -  total flux cleaned = 0.00144213 Jy
! Component: 2050  -  total flux cleaned = 0.00144225 Jy
! Component: 2100  -  total flux cleaned = 0.00148615 Jy
! Component: 2150  -  total flux cleaned = 0.00151529 Jy
! Component: 2200  -  total flux cleaned = 0.00151535 Jy
! Component: 2250  -  total flux cleaned = 0.00154385 Jy
! Component: 2300  -  total flux cleaned = 0.00160038 Jy
! Component: 2350  -  total flux cleaned = 0.00160035 Jy
! Component: 2400  -  total flux cleaned = 0.00162801 Jy
! Component: 2450  -  total flux cleaned = 0.00168305 Jy
! Component: 2500  -  total flux cleaned = 0.00168295 Jy
! Component: 2550  -  total flux cleaned = 0.00168299 Jy
! Component: 2600  -  total flux cleaned = 0.00164257 Jy
! Component: 2650  -  total flux cleaned = 0.0016559 Jy
! Component: 2700  -  total flux cleaned = 0.00166908 Jy
! Component: 2750  -  total flux cleaned = 0.0017215 Jy
! Component: 2800  -  total flux cleaned = 0.00176026 Jy
! Component: 2850  -  total flux cleaned = 0.00170881 Jy
! Component: 2900  -  total flux cleaned = 0.00165786 Jy
! Component: 2950  -  total flux cleaned = 0.00164541 Jy
! Component: 3000  -  total flux cleaned = 0.00169577 Jy
! Component: 3050  -  total flux cleaned = 0.00169562 Jy
! Component: 3100  -  total flux cleaned = 0.00168327 Jy
! Component: 3150  -  total flux cleaned = 0.00168341 Jy
! Component: 3200  -  total flux cleaned = 0.00164671 Jy
! Component: 3250  -  total flux cleaned = 0.00169531 Jy
! Component: 3300  -  total flux cleaned = 0.00165914 Jy
! Component: 3350  -  total flux cleaned = 0.00168297 Jy
! Component: 3400  -  total flux cleaned = 0.00173046 Jy
! Component: 3450  -  total flux cleaned = 0.00167142 Jy
! Component: 3500  -  total flux cleaned = 0.00165972 Jy
! Component: 3550  -  total flux cleaned = 0.00169466 Jy
! Component: 3600  -  total flux cleaned = 0.00168313 Jy
! Component: 3650  -  total flux cleaned = 0.00171767 Jy
! Component: 3700  -  total flux cleaned = 0.0017291 Jy
! Component: 3750  -  total flux cleaned = 0.0017858 Jy
! Component: 3800  -  total flux cleaned = 0.00179707 Jy
! Component: 3850  -  total flux cleaned = 0.00181947 Jy
! Component: 3900  -  total flux cleaned = 0.00180828 Jy
! Component: 3950  -  total flux cleaned = 0.00184165 Jy
! Component: 4000  -  total flux cleaned = 0.0018856 Jy
! Component: 4050  -  total flux cleaned = 0.00186355 Jy
! Total flux subtracted in 4096 components = 0.00189641 Jy
! Clean residual min=-0.000639 max=0.000625 Jy/beam
! Clean residual mean=-0.000000 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.0878602 Jy
keep
! Adding 296 model components to the UV plane model.
! The established model now contains 336 components and 0.0878601 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J1105+3207_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.414 x 3.797 at 14.78 degrees (North through East)
! Clean map  min=-0.0015667  max=0.072324 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J1105+3207_C_map.fits
wmodel /scr/pima/bu007_uvs/J1105+3207_C_map.mod
! Writing 336 model components to file: /scr/pima/bu007_uvs/J1105+3207_C_map.mod
wobs   /scr/pima/bu007_uvs/J1105+3207_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J1105+3207_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J1105+3207_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bu007_uvs/J1105+3207_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0723242 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000193086 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.80092 0.80092 1.60184 3.20368 6.40736 12.8147 25.6294 51.2589
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.072 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  374.569 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J1105+3207_C_dfm.log closed on Sun Jun 24 02:20:54 2018