! Started logfile: /scr/pima/bu007_uvs/J1010+3330_C_dfm.log on Sun Jun 24 02:20:03 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J1010+3330_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J1010+3330_C_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.934321 visibilities/baseline/integration-bin.
! Found source: J1010+3330
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 15136 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1010+3330_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.043333Jy  sigma=15.939190
! Fit after  self-cal, rms=0.712984Jy  sigma=10.877987
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.153 mas, bmaj=3.129 mas, bpa=7.404 degrees
! Estimated noise=0.626969 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.222863 Jy
! Component: 100  -  total flux cleaned = 0.271506 Jy
! Total flux subtracted in 100 components = 0.271506 Jy
! Clean residual min=-0.005196 max=0.013881 Jy/beam
! Clean residual mean=-0.000007 rms=0.001160 Jy/beam
! Combined flux in latest and established models = 0.271506 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.271506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088398Jy  sigma=1.299451
! Fit after  self-cal, rms=0.088389Jy  sigma=1.299314
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141041 Jy
! Component: 100  -  total flux cleaned = 0.0214241 Jy
! Total flux subtracted in 100 components = 0.0214241 Jy
! Clean residual min=-0.003912 max=0.003829 Jy/beam
! Clean residual mean=-0.000003 rms=0.000864 Jy/beam
! Combined flux in latest and established models = 0.292931 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.292931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085318Jy  sigma=1.253010
! Fit after  self-cal, rms=0.085295Jy  sigma=1.252809
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.354 mas, bmaj=3.433 mas, bpa=5.108 degrees
! Estimated noise=0.400437 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00691421 Jy
! Component: 100  -  total flux cleaned = 0.010783 Jy
! Component: 150  -  total flux cleaned = 0.0132077 Jy
! Component: 200  -  total flux cleaned = 0.0148086 Jy
! Total flux subtracted in 200 components = 0.0148086 Jy
! Clean residual min=-0.002015 max=0.002621 Jy/beam
! Clean residual mean=-0.000002 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.307739 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 42 components and 0.307739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084709Jy  sigma=1.244195
! Fit after  self-cal, rms=0.084694Jy  sigma=1.244028
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.354 x 3.433 at 5.108 degrees (North through East)
! Clean map  min=-0.0018407  max=0.2904 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        0.98     
!   LA        1.00     MK        1.02     NL        1.01     OV        0.98     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.03     KP        1.00     
!   LA        1.01     MK        1.02     NL        1.00     OV        0.98     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.04     KP        1.03     
!   LA        0.99     MK        1.03     NL        1.01     OV        0.99     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.01     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.98     KP        1.01     
!   LA        1.00     MK        1.03     NL        0.99     OV        0.98     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.02     KP        0.97     
!   LA        0.99     MK        1.01     NL        1.01     OV        1.01     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.00     KP        0.99     
!   LA        0.97     MK        1.02     NL        0.99     OV        1.01     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.02     KP        0.99     
!   LA        1.00     MK        1.01     NL        0.98     OV        0.97     
!   PT        0.98     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.084694Jy  sigma=1.244028
! Fit after  self-cal, rms=0.084396Jy  sigma=1.240556
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.36 mas, bmaj=3.437 mas, bpa=5.235 degrees
! Estimated noise=0.400447 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000303838 Jy
! Component: 100  -  total flux cleaned = 0.000192429 Jy
! Component: 150  -  total flux cleaned = 0.000109336 Jy
! Component: 200  -  total flux cleaned = 6.11896e-05 Jy
! Total flux subtracted in 200 components = 6.11896e-05 Jy
! Clean residual min=-0.001843 max=0.002423 Jy/beam
! Clean residual mean=-0.000001 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.3078 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 0.3078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084374Jy  sigma=1.240279
! Fit after  self-cal, rms=0.084372Jy  sigma=1.240220
! Inverting map 
! Added new window around map position (-7.5, -74.7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107822 Jy
! Component: 100  -  total flux cleaned = 0.000703921 Jy
! Component: 150  -  total flux cleaned = 0.00048162 Jy
! Component: 200  -  total flux cleaned = 0.00032213 Jy
! Total flux subtracted in 200 components = 0.00032213 Jy
! Clean residual min=-0.001821 max=0.002030 Jy/beam
! Clean residual mean=-0.000001 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.308122 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 65 components and 0.308122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084315Jy  sigma=1.239468
! Fit after  self-cal, rms=0.084311Jy  sigma=1.239420
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084311Jy  sigma=1.239420
! Fit after  self-cal, rms=0.084177Jy  sigma=1.236736
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.359 mas, bmaj=3.435 mas, bpa=5.175 degrees
! Estimated noise=0.40008 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.64576e-06 Jy
! Component: 100  -  total flux cleaned = -6.06445e-05 Jy
! Component: 150  -  total flux cleaned = -0.000115767 Jy
! Component: 200  -  total flux cleaned = -0.000148862 Jy
! Total flux subtracted in 200 components = -0.000148862 Jy
! Clean residual min=-0.001811 max=0.001861 Jy/beam
! Clean residual mean=-0.000001 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.307973 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 78 components and 0.307973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084166Jy  sigma=1.236616
! Fit after  self-cal, rms=0.084169Jy  sigma=1.236594
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-34.8, -75.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000773352 Jy
! Component: 100  -  total flux cleaned = 0.000698702 Jy
! Component: 150  -  total flux cleaned = 0.000548872 Jy
! Component: 200  -  total flux cleaned = 0.00059525 Jy
! Total flux subtracted in 200 components = 0.00059525 Jy
! Clean residual min=-0.001811 max=0.001739 Jy/beam
! Clean residual mean=-0.000001 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.308569 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 96 components and 0.308569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084125Jy  sigma=1.236045
! Fit after  self-cal, rms=0.084124Jy  sigma=1.236004
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084124Jy  sigma=1.236004
! Fit after  self-cal, rms=0.084130Jy  sigma=1.235920
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.359 mas, bmaj=3.434 mas, bpa=5.169 degrees
! Estimated noise=0.400042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.12537e-05 Jy
! Component: 100  -  total flux cleaned = 7.37513e-05 Jy
! Component: 150  -  total flux cleaned = 7.31465e-05 Jy
! Component: 200  -  total flux cleaned = 7.36324e-05 Jy
! Total flux subtracted in 200 components = 7.36324e-05 Jy
! Clean residual min=-0.001793 max=0.001709 Jy/beam
! Clean residual mean=-0.000001 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.308642 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 101 components and 0.308642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084119Jy  sigma=1.235789
! Fit after  self-cal, rms=0.084120Jy  sigma=1.235783
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.60374e-05 Jy
! Component: 100  -  total flux cleaned = -5.21714e-05 Jy
! Component: 150  -  total flux cleaned = -3.67004e-05 Jy
! Component: 200  -  total flux cleaned = -3.722e-05 Jy
! Total flux subtracted in 200 components = -3.722e-05 Jy
! Clean residual min=-0.001770 max=0.001695 Jy/beam
! Clean residual mean=-0.000001 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.308605 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 108 components and 0.308605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084115Jy  sigma=1.235710
! Fit after  self-cal, rms=0.084115Jy  sigma=1.235709
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084115Jy  sigma=1.235709
! Fit after  self-cal, rms=0.084099Jy  sigma=1.235694
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.465 mas, bmaj=4.746 mas, bpa=3.505 degrees
! Estimated noise=0.555266 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000125668 Jy
! Component: 100  -  total flux cleaned = 2.10113e-05 Jy
! Component: 150  -  total flux cleaned = -2.29616e-05 Jy
! Component: 200  -  total flux cleaned = -6.13319e-05 Jy
! Total flux subtracted in 200 components = -6.13319e-05 Jy
! Clean residual min=-0.002132 max=0.002094 Jy/beam
! Clean residual mean=-0.000002 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.308544 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 118 components and 0.308544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084102Jy  sigma=1.235736
! Fit after  self-cal, rms=0.084100Jy  sigma=1.235683
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.86132e-05 Jy
! Component: 100  -  total flux cleaned = -1.63819e-05 Jy
! Component: 150  -  total flux cleaned = -4.96714e-05 Jy
! Component: 200  -  total flux cleaned = -7.8831e-05 Jy
! Total flux subtracted in 200 components = -7.8831e-05 Jy
! Clean residual min=-0.002117 max=0.002074 Jy/beam
! Clean residual mean=-0.000002 rms=0.000551 Jy/beam
! Combined flux in latest and established models = 0.308465 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 119 components and 0.308465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084105Jy  sigma=1.235780
! Fit after  self-cal, rms=0.084104Jy  sigma=1.235746
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.359 mas, bmaj=3.434 mas, bpa=5.165 degrees
! Estimated noise=0.39998 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.359 x 3.434 at 5.165 degrees (North through East)
! Clean map  min=-0.0016531  max=0.28982 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.156 mas, bmaj=3.122 mas, bpa=7.471 degrees
! Estimated noise=0.619127 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.223059 Jy
! Component: 100  -  total flux cleaned = 0.271926 Jy
! Component: 150  -  total flux cleaned = 0.285466 Jy
! Component: 200  -  total flux cleaned = 0.292518 Jy
! Total flux subtracted in 200 components = 0.292518 Jy
! Clean residual min=-0.003751 max=0.003640 Jy/beam
! Clean residual mean=-0.000003 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.292518 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.292518 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.359 mas, bmaj=3.434 mas, bpa=5.165 degrees
! Estimated noise=0.39998 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00639112 Jy
! Component: 100  -  total flux cleaned = 0.00996482 Jy
! Component: 150  -  total flux cleaned = 0.0120662 Jy
! Component: 200  -  total flux cleaned = 0.0134411 Jy
! Total flux subtracted in 200 components = 0.0134411 Jy
! Clean residual min=-0.001878 max=0.002181 Jy/beam
! Clean residual mean=-0.000003 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.305959 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 42 components and 0.305959 Jy
! Inverting map 
! Added new window around map position (1.8, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208001 Jy
! Component: 100  -  total flux cleaned = 0.0026244 Jy
! Component: 150  -  total flux cleaned = 0.00303972 Jy
! Component: 200  -  total flux cleaned = 0.00335701 Jy
! Total flux subtracted in 200 components = 0.00335701 Jy
! Clean residual min=-0.001731 max=0.001852 Jy/beam
! Clean residual mean=-0.000001 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.309316 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 59 components and 0.309316 Jy
! Inverting map 
! Added new window around map position (-72.9, -19.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012915 Jy
! Component: 100  -  total flux cleaned = 0.00185798 Jy
! Component: 150  -  total flux cleaned = 0.00207592 Jy
! Component: 200  -  total flux cleaned = 0.00214462 Jy
! Total flux subtracted in 200 components = 0.00214462 Jy
! Clean residual min=-0.001684 max=0.001823 Jy/beam
! Clean residual mean=-0.000001 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.31146 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 82 components and 0.31146 Jy
! Inverting map 
! Added new window around map position (-55.8, -2.7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00165746 Jy
! Component: 100  -  total flux cleaned = 0.0026829 Jy
! Component: 150  -  total flux cleaned = 0.00335403 Jy
! Component: 200  -  total flux cleaned = 0.00384297 Jy
! Total flux subtracted in 200 components = 0.00384297 Jy
! Clean residual min=-0.001610 max=0.001574 Jy/beam
! Clean residual mean=-0.000000 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.315303 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 102 components and 0.315303 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.465 mas, bmaj=4.746 mas, bpa=3.505 degrees
! Estimated noise=0.555266 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00065875 Jy
! Component: 100  -  total flux cleaned = 0.000891629 Jy
! Component: 150  -  total flux cleaned = 0.0010457 Jy
! Component: 200  -  total flux cleaned = 0.00123049 Jy
! Total flux subtracted in 200 components = 0.00123049 Jy
! Clean residual min=-0.001960 max=0.001766 Jy/beam
! Clean residual mean=0.000001 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.316534 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000189383 Jy
! Component: 100  -  total flux cleaned = 0.0003623 Jy
! Component: 150  -  total flux cleaned = 0.000503663 Jy
! Component: 200  -  total flux cleaned = 0.000602237 Jy
! Total flux subtracted in 200 components = 0.000602237 Jy
! Clean residual min=-0.001944 max=0.001770 Jy/beam
! Clean residual mean=0.000001 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.317136 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 152 components and 0.317136 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.359 mas, bmaj=3.434 mas, bpa=5.165 degrees
! Estimated noise=0.39998 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.4259e-05 Jy
! Component: 100  -  total flux cleaned = -2.7596e-05 Jy
! Component: 150  -  total flux cleaned = 4.84338e-05 Jy
! Component: 200  -  total flux cleaned = 0.000119829 Jy
! Total flux subtracted in 200 components = 0.000119829 Jy
! Clean residual min=-0.001647 max=0.001648 Jy/beam
! Clean residual mean=0.000000 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.317256 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 170 components and 0.317256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084021Jy  sigma=1.234333
! Fit after  self-cal, rms=0.084014Jy  sigma=1.234185
wmodel J1010+3330_C_map.mod
! Writing 170 model components to file: J1010+3330_C_map.mod
wobs   J1010+3330_C_uvs.fits
! Writing UV FITS file: J1010+3330_C_uvs.fits
wwins  J1010+3330_C_map.win
! wwins: Wrote 6 windows to J1010+3330_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 9.23131e-05 Jy
! Component: 100  -  total flux cleaned = 0.000119758 Jy
! Component: 150  -  total flux cleaned = 0.000146358 Jy
! Component: 200  -  total flux cleaned = 0.000146139 Jy
! Component: 250  -  total flux cleaned = 0.000222884 Jy
! Component: 300  -  total flux cleaned = 0.000247911 Jy
! Component: 350  -  total flux cleaned = 0.000320638 Jy
! Component: 400  -  total flux cleaned = 0.000272045 Jy
! Component: 450  -  total flux cleaned = 0.000248888 Jy
! Component: 500  -  total flux cleaned = 0.000294939 Jy
! Component: 550  -  total flux cleaned = 0.000249268 Jy
! Component: 600  -  total flux cleaned = 0.000204539 Jy
! Component: 650  -  total flux cleaned = 0.000226604 Jy
! Component: 700  -  total flux cleaned = 0.00027037 Jy
! Component: 750  -  total flux cleaned = 0.000141059 Jy
! Component: 800  -  total flux cleaned = 0.000226071 Jy
! Component: 850  -  total flux cleaned = 9.95565e-05 Jy
! Component: 900  -  total flux cleaned = 0.000120204 Jy
! Component: 950  -  total flux cleaned = -3.80431e-06 Jy
! Component: 1000  -  total flux cleaned = -2.40123e-05 Jy
! Component: 1050  -  total flux cleaned = -2.37902e-05 Jy
! Component: 1100  -  total flux cleaned = -4.38198e-05 Jy
! Component: 1150  -  total flux cleaned = -0.000103144 Jy
! Component: 1200  -  total flux cleaned = -4.42482e-05 Jy
! Component: 1250  -  total flux cleaned = -0.000122292 Jy
! Component: 1300  -  total flux cleaned = -0.000180291 Jy
! Component: 1350  -  total flux cleaned = -0.000237454 Jy
! Component: 1400  -  total flux cleaned = -0.000237497 Jy
! Component: 1450  -  total flux cleaned = -0.000200231 Jy
! Component: 1500  -  total flux cleaned = -0.000312126 Jy
! Component: 1550  -  total flux cleaned = -0.000219497 Jy
! Component: 1600  -  total flux cleaned = -0.000182875 Jy
! Component: 1650  -  total flux cleaned = -0.00029254 Jy
! Component: 1700  -  total flux cleaned = -0.000292575 Jy
! Component: 1750  -  total flux cleaned = -0.000274351 Jy
! Component: 1800  -  total flux cleaned = -0.000239013 Jy
! Component: 1850  -  total flux cleaned = -0.000185834 Jy
! Component: 1900  -  total flux cleaned = -0.00025611 Jy
! Component: 1950  -  total flux cleaned = -0.000273711 Jy
! Component: 2000  -  total flux cleaned = -0.000204459 Jy
! Component: 2050  -  total flux cleaned = -0.000170048 Jy
! Component: 2100  -  total flux cleaned = -0.000101824 Jy
! Component: 2150  -  total flux cleaned = -6.80325e-05 Jy
! Component: 2200  -  total flux cleaned = -5.1448e-05 Jy
! Component: 2250  -  total flux cleaned = -3.45993e-05 Jy
! Component: 2300  -  total flux cleaned = -6.78495e-05 Jy
! Component: 2350  -  total flux cleaned = -3.48474e-05 Jy
! Component: 2400  -  total flux cleaned = 1.43682e-05 Jy
! Component: 2450  -  total flux cleaned = -1.83815e-06 Jy
! Component: 2500  -  total flux cleaned = -1.71562e-06 Jy
! Component: 2550  -  total flux cleaned = -1.61417e-06 Jy
! Component: 2600  -  total flux cleaned = -1.6574e-06 Jy
! Component: 2650  -  total flux cleaned = 1.43804e-05 Jy
! Component: 2700  -  total flux cleaned = -3.32064e-05 Jy
! Component: 2750  -  total flux cleaned = 1.40574e-05 Jy
! Component: 2800  -  total flux cleaned = 1.4017e-05 Jy
! Component: 2850  -  total flux cleaned = -6.36968e-05 Jy
! Component: 2900  -  total flux cleaned = -3.27574e-05 Jy
! Component: 2950  -  total flux cleaned = -7.89617e-05 Jy
! Component: 3000  -  total flux cleaned = -0.000201396 Jy
! Component: 3050  -  total flux cleaned = -0.000140384 Jy
! Component: 3100  -  total flux cleaned = -0.000155679 Jy
! Component: 3150  -  total flux cleaned = -0.000276419 Jy
! Component: 3200  -  total flux cleaned = -0.000306431 Jy
! Component: 3250  -  total flux cleaned = -0.000202102 Jy
! Component: 3300  -  total flux cleaned = -0.000246577 Jy
! Component: 3350  -  total flux cleaned = -0.000305861 Jy
! Component: 3400  -  total flux cleaned = -0.000335336 Jy
! Component: 3450  -  total flux cleaned = -0.000393812 Jy
! Component: 3500  -  total flux cleaned = -0.000393892 Jy
! Component: 3550  -  total flux cleaned = -0.000437366 Jy
! Component: 3600  -  total flux cleaned = -0.000437446 Jy
! Component: 3650  -  total flux cleaned = -0.000580849 Jy
! Component: 3700  -  total flux cleaned = -0.000609313 Jy
! Component: 3750  -  total flux cleaned = -0.000595184 Jy
! Component: 3800  -  total flux cleaned = -0.000581116 Jy
! Component: 3850  -  total flux cleaned = -0.000609299 Jy
! Component: 3900  -  total flux cleaned = -0.000707299 Jy
! Component: 3950  -  total flux cleaned = -0.000721215 Jy
! Component: 4000  -  total flux cleaned = -0.000749124 Jy
! Component: 4050  -  total flux cleaned = -0.000873315 Jy
! Total flux subtracted in 4096 components = -0.000859476 Jy
! Clean residual min=-0.000768 max=0.000713 Jy/beam
! Clean residual mean=0.000000 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.316396 Jy
keep
! Adding 329 model components to the UV plane model.
! The established model now contains 499 components and 0.316396 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J1010+3330_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.359 x 3.434 at 5.165 degrees (North through East)
! Clean map  min=-0.0012869  max=0.28997 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J1010+3330_C_map.fits
wmodel /scr/pima/bu007_uvs/J1010+3330_C_map.mod
! Writing 499 model components to file: /scr/pima/bu007_uvs/J1010+3330_C_map.mod
wobs   /scr/pima/bu007_uvs/J1010+3330_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J1010+3330_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J1010+3330_C_map.win
! wwins: Wrote 7 windows to /scr/pima/bu007_uvs/J1010+3330_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.289974 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000247438 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.255993 0.255993 0.511987 1.02397 2.04795 4.0959 8.19179 16.3836 32.7672 65.5343
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.289 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1171.9 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J1010+3330_C_dfm.log closed on Sun Jun 24 02:20:08 2018