! Started logfile: /scr/pima/bu007_uvs/J0953+3225_C_dfm.log on Sun Jun 24 02:19:30 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J0953+3225_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J0953+3225_C_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.973016 visibilities/baseline/integration-bin.
! Found source: J0953+3225
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 14712 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0953+3225_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011977Jy  sigma=17.899481
! Fit after  self-cal, rms=0.875840Jy  sigma=15.497767
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.195 mas, bmaj=3.328 mas, bpa=16.83 degrees
! Estimated noise=0.534548 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0966385 Jy
! Component: 100  -  total flux cleaned = 0.120262 Jy
! Total flux subtracted in 100 components = 0.120262 Jy
! Clean residual min=-0.005003 max=0.009500 Jy/beam
! Clean residual mean=-0.000002 rms=0.000971 Jy/beam
! Combined flux in latest and established models = 0.120262 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.120262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085959Jy  sigma=1.455325
! Fit after  self-cal, rms=0.085821Jy  sigma=1.453401
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103227 Jy
! Component: 100  -  total flux cleaned = 0.0152273 Jy
! Total flux subtracted in 100 components = 0.0152273 Jy
! Clean residual min=-0.003451 max=0.003133 Jy/beam
! Clean residual mean=-0.000001 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.135489 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.135489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084459Jy  sigma=1.428275
! Fit after  self-cal, rms=0.084410Jy  sigma=1.427634
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.465 mas, bmaj=3.597 mas, bpa=16.25 degrees
! Estimated noise=0.338198 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00402747 Jy
! Component: 100  -  total flux cleaned = 0.00584265 Jy
! Component: 150  -  total flux cleaned = 0.0069076 Jy
! Component: 200  -  total flux cleaned = 0.00759762 Jy
! Total flux subtracted in 200 components = 0.00759762 Jy
! Clean residual min=-0.001771 max=0.001764 Jy/beam
! Clean residual mean=-0.000001 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.143086 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 34 components and 0.143086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084240Jy  sigma=1.424262
! Fit after  self-cal, rms=0.084227Jy  sigma=1.424109
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.465 x 3.597 at 16.25 degrees (North through East)
! Clean map  min=-0.0017312  max=0.1259 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.97     KP        0.98     
!   LA        1.03     MK        1.03     NL        0.99     OV        0.96     
!   PT        1.04     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.06     KP        0.94     
!   LA        1.02     MK        1.03     NL        1.01     OV        1.03     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.99     KP        0.97     
!   LA        1.00     MK        1.00     NL        1.00     OV        1.00     
!   PT        0.99     SC        1.09     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.06     HN        0.99     KP        0.98     
!   LA        0.98     MK        0.98     NL        0.99     OV        0.95     
!   PT        1.02     SC        0.96     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.00     KP        1.04     
!   LA        0.99     MK        1.04     NL        0.98     OV        0.94     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        0.97     KP        1.03     
!   LA        0.98     MK        1.03     NL        1.00     OV        0.99     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.96     HN        0.97     KP        1.00     
!   LA        1.02     MK        1.03     NL        1.01     OV        1.00     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        0.95     
!   LA        1.00     MK        1.02     NL        0.99     OV        0.96     
!   PT        0.98     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.084227Jy  sigma=1.424109
! Fit after  self-cal, rms=0.084147Jy  sigma=1.421451
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.472 mas, bmaj=3.605 mas, bpa=16.24 degrees
! Estimated noise=0.337852 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000549533 Jy
! Component: 100  -  total flux cleaned = -0.000718646 Jy
! Component: 150  -  total flux cleaned = -0.00085207 Jy
! Component: 200  -  total flux cleaned = -0.000887098 Jy
! Total flux subtracted in 200 components = -0.000887098 Jy
! Clean residual min=-0.001607 max=0.001668 Jy/beam
! Clean residual mean=-0.000001 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.142199 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 44 components and 0.142199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084134Jy  sigma=1.421293
! Fit after  self-cal, rms=0.084138Jy  sigma=1.421190
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084138Jy  sigma=1.421190
! Fit after  self-cal, rms=0.084278Jy  sigma=1.420905
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.474 mas, bmaj=3.608 mas, bpa=16.22 degrees
! Estimated noise=0.338182 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000351537 Jy
! Component: 100  -  total flux cleaned = -0.000417387 Jy
! Component: 150  -  total flux cleaned = -0.000466715 Jy
! Component: 200  -  total flux cleaned = -0.000497684 Jy
! Total flux subtracted in 200 components = -0.000497684 Jy
! Clean residual min=-0.001633 max=0.001627 Jy/beam
! Clean residual mean=-0.000001 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.141702 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 46 components and 0.141702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084270Jy  sigma=1.420821
! Fit after  self-cal, rms=0.084270Jy  sigma=1.420785
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.62892e-05 Jy
! Component: 100  -  total flux cleaned = -6.20895e-05 Jy
! Component: 150  -  total flux cleaned = -7.1205e-05 Jy
! Component: 200  -  total flux cleaned = -7.92764e-05 Jy
! Total flux subtracted in 200 components = -7.92764e-05 Jy
! Clean residual min=-0.001635 max=0.001623 Jy/beam
! Clean residual mean=-0.000001 rms=0.000446 Jy/beam
! Combined flux in latest and established models = 0.141622 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 48 components and 0.141622 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084265Jy  sigma=1.420731
! Fit after  self-cal, rms=0.084265Jy  sigma=1.420707
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084265Jy  sigma=1.420707
! Fit after  self-cal, rms=0.084547Jy  sigma=1.418875
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.477 mas, bmaj=3.606 mas, bpa=16.24 degrees
! Estimated noise=0.338606 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00016824 Jy
! Component: 100  -  total flux cleaned = -0.000209913 Jy
! Component: 150  -  total flux cleaned = -0.000232188 Jy
! Component: 200  -  total flux cleaned = -0.00026025 Jy
! Total flux subtracted in 200 components = -0.00026025 Jy
! Clean residual min=-0.001667 max=0.001678 Jy/beam
! Clean residual mean=-0.000001 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.141362 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 51 components and 0.141362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084543Jy  sigma=1.418810
! Fit after  self-cal, rms=0.084555Jy  sigma=1.418750
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.91077e-05 Jy
! Component: 100  -  total flux cleaned = -6.89926e-05 Jy
! Component: 150  -  total flux cleaned = -7.62747e-05 Jy
! Component: 200  -  total flux cleaned = -8.28641e-05 Jy
! Total flux subtracted in 200 components = -8.28641e-05 Jy
! Clean residual min=-0.001664 max=0.001671 Jy/beam
! Clean residual mean=-0.000001 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.141279 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 0.141279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084552Jy  sigma=1.418718
! Fit after  self-cal, rms=0.084552Jy  sigma=1.418707
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084552Jy  sigma=1.418707
! Fit after  self-cal, rms=0.084658Jy  sigma=1.418699
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.479 mas, bmaj=4.856 mas, bpa=9.246 degrees
! Estimated noise=0.452486 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.33127e-05 Jy
! Component: 100  -  total flux cleaned = -2.11597e-05 Jy
! Component: 150  -  total flux cleaned = -5.29924e-05 Jy
! Component: 200  -  total flux cleaned = -8.41661e-05 Jy
! Total flux subtracted in 200 components = -8.41661e-05 Jy
! Clean residual min=-0.002113 max=0.002152 Jy/beam
! Clean residual mean=-0.000002 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.141195 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 56 components and 0.141195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084658Jy  sigma=1.418697
! Fit after  self-cal, rms=0.084657Jy  sigma=1.418667
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.49209e-06 Jy
! Component: 100  -  total flux cleaned = 5.0682e-06 Jy
! Component: 150  -  total flux cleaned = -1.38181e-05 Jy
! Component: 200  -  total flux cleaned = -2.53898e-05 Jy
! Total flux subtracted in 200 components = -2.53898e-05 Jy
! Clean residual min=-0.002103 max=0.002171 Jy/beam
! Clean residual mean=-0.000002 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.14117 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 57 components and 0.14117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084657Jy  sigma=1.418674
! Fit after  self-cal, rms=0.084657Jy  sigma=1.418663
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.478 mas, bmaj=3.606 mas, bpa=16.23 degrees
! Estimated noise=0.339004 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.478 x 3.606 at 16.23 degrees (North through East)
! Clean map  min=-0.0015775  max=0.1262 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.205 mas, bmaj=3.327 mas, bpa=16.85 degrees
! Estimated noise=0.540551 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0974662 Jy
! Component: 100  -  total flux cleaned = 0.122436 Jy
! Component: 150  -  total flux cleaned = 0.133026 Jy
! Component: 200  -  total flux cleaned = 0.137749 Jy
! Total flux subtracted in 200 components = 0.137749 Jy
! Clean residual min=-0.002865 max=0.003006 Jy/beam
! Clean residual mean=-0.000001 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.137749 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.137749 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.478 mas, bmaj=3.606 mas, bpa=16.23 degrees
! Estimated noise=0.339004 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024413 Jy
! Component: 100  -  total flux cleaned = 0.00284729 Jy
! Component: 150  -  total flux cleaned = 0.00293854 Jy
! Component: 200  -  total flux cleaned = 0.00304741 Jy
! Total flux subtracted in 200 components = 0.00304741 Jy
! Clean residual min=-0.001669 max=0.001682 Jy/beam
! Clean residual mean=-0.000001 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.140796 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 25 components and 0.140796 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.479 mas, bmaj=4.856 mas, bpa=9.246 degrees
! Estimated noise=0.452486 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000387172 Jy
! Component: 100  -  total flux cleaned = 0.000350154 Jy
! Component: 150  -  total flux cleaned = 0.000360498 Jy
! Component: 200  -  total flux cleaned = 0.000368003 Jy
! Total flux subtracted in 200 components = 0.000368003 Jy
! Clean residual min=-0.002122 max=0.002181 Jy/beam
! Clean residual mean=-0.000002 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.141164 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.00084e-06 Jy
! Component: 100  -  total flux cleaned = -1.29018e-05 Jy
! Component: 150  -  total flux cleaned = -1.28837e-05 Jy
! Component: 200  -  total flux cleaned = -1.30261e-05 Jy
! Total flux subtracted in 200 components = -1.30261e-05 Jy
! Clean residual min=-0.002114 max=0.002178 Jy/beam
! Clean residual mean=-0.000002 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.141151 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 38 components and 0.141151 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.478 mas, bmaj=3.606 mas, bpa=16.23 degrees
! Estimated noise=0.339004 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.25253e-05 Jy
! Component: 100  -  total flux cleaned = 7.89713e-05 Jy
! Component: 150  -  total flux cleaned = 7.94173e-05 Jy
! Component: 200  -  total flux cleaned = 6.69182e-05 Jy
! Total flux subtracted in 200 components = 6.69182e-05 Jy
! Clean residual min=-0.001668 max=0.001697 Jy/beam
! Clean residual mean=-0.000001 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.141218 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 45 components and 0.141218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084657Jy  sigma=1.418712
! Fit after  self-cal, rms=0.084657Jy  sigma=1.418697
wmodel J0953+3225_C_map.mod
! Writing 45 model components to file: J0953+3225_C_map.mod
wobs   J0953+3225_C_uvs.fits
! Writing UV FITS file: J0953+3225_C_uvs.fits
wwins  J0953+3225_C_map.win
! wwins: Wrote 1 windows to J0953+3225_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000255847 Jy
! Component: 100  -  total flux cleaned = 0.000167888 Jy
! Component: 150  -  total flux cleaned = 0.000110126 Jy
! Component: 200  -  total flux cleaned = 2.63815e-05 Jy
! Component: 250  -  total flux cleaned = -1.01135e-06 Jy
! Component: 300  -  total flux cleaned = -2.77788e-05 Jy
! Component: 350  -  total flux cleaned = -5.42483e-05 Jy
! Component: 400  -  total flux cleaned = -5.44478e-05 Jy
! Component: 450  -  total flux cleaned = -5.44357e-05 Jy
! Component: 500  -  total flux cleaned = -2.8871e-05 Jy
! Component: 550  -  total flux cleaned = 2.07501e-05 Jy
! Component: 600  -  total flux cleaned = -2.84475e-05 Jy
! Component: 650  -  total flux cleaned = -2.83391e-05 Jy
! Component: 700  -  total flux cleaned = -7.6216e-05 Jy
! Component: 750  -  total flux cleaned = -9.9824e-05 Jy
! Component: 800  -  total flux cleaned = -0.000146539 Jy
! Component: 850  -  total flux cleaned = -0.00016973 Jy
! Component: 900  -  total flux cleaned = -0.000352563 Jy
! Component: 950  -  total flux cleaned = -0.000307011 Jy
! Component: 1000  -  total flux cleaned = -0.000329373 Jy
! Component: 1050  -  total flux cleaned = -0.000329564 Jy
! Component: 1100  -  total flux cleaned = -0.000329473 Jy
! Component: 1150  -  total flux cleaned = -0.000394834 Jy
! Component: 1200  -  total flux cleaned = -0.000459402 Jy
! Component: 1250  -  total flux cleaned = -0.000438057 Jy
! Component: 1300  -  total flux cleaned = -0.00048042 Jy
! Component: 1350  -  total flux cleaned = -0.000501312 Jy
! Component: 1400  -  total flux cleaned = -0.000377456 Jy
! Component: 1450  -  total flux cleaned = -0.000460108 Jy
! Component: 1500  -  total flux cleaned = -0.000439545 Jy
! Component: 1550  -  total flux cleaned = -0.000419532 Jy
! Component: 1600  -  total flux cleaned = -0.000479477 Jy
! Component: 1650  -  total flux cleaned = -0.000340175 Jy
! Component: 1700  -  total flux cleaned = -0.000320289 Jy
! Component: 1750  -  total flux cleaned = -0.000319992 Jy
! Component: 1800  -  total flux cleaned = -0.000261893 Jy
! Component: 1850  -  total flux cleaned = -0.000262108 Jy
! Component: 1900  -  total flux cleaned = -0.000300654 Jy
! Component: 1950  -  total flux cleaned = -0.000281654 Jy
! Component: 2000  -  total flux cleaned = -0.000281519 Jy
! Component: 2050  -  total flux cleaned = -0.000356599 Jy
! Component: 2100  -  total flux cleaned = -0.000300482 Jy
! Component: 2150  -  total flux cleaned = -0.000226438 Jy
! Component: 2200  -  total flux cleaned = -0.000300025 Jy
! Component: 2250  -  total flux cleaned = -0.00024504 Jy
! Component: 2300  -  total flux cleaned = -0.000208752 Jy
! Component: 2350  -  total flux cleaned = -0.000208689 Jy
! Component: 2400  -  total flux cleaned = -0.000173005 Jy
! Component: 2450  -  total flux cleaned = -8.39005e-05 Jy
! Component: 2500  -  total flux cleaned = -0.000119599 Jy
! Component: 2550  -  total flux cleaned = -0.000101949 Jy
! Component: 2600  -  total flux cleaned = -6.70523e-05 Jy
! Component: 2650  -  total flux cleaned = -1.47923e-05 Jy
! Component: 2700  -  total flux cleaned = -8.40901e-05 Jy
! Component: 2750  -  total flux cleaned = -3.22141e-05 Jy
! Component: 2800  -  total flux cleaned = 1.91241e-05 Jy
! Component: 2850  -  total flux cleaned = 7.0131e-05 Jy
! Component: 2900  -  total flux cleaned = 2.32417e-06 Jy
! Component: 2950  -  total flux cleaned = 8.65565e-05 Jy
! Component: 3000  -  total flux cleaned = 7.00204e-05 Jy
! Component: 3050  -  total flux cleaned = 0.000103504 Jy
! Component: 3100  -  total flux cleaned = 0.000136942 Jy
! Component: 3150  -  total flux cleaned = 0.000120343 Jy
! Component: 3200  -  total flux cleaned = 0.00015328 Jy
! Component: 3250  -  total flux cleaned = 0.000202301 Jy
! Component: 3300  -  total flux cleaned = 0.000218692 Jy
! Component: 3350  -  total flux cleaned = 0.000251082 Jy
! Component: 3400  -  total flux cleaned = 0.000299351 Jy
! Component: 3450  -  total flux cleaned = 0.000331362 Jy
! Component: 3500  -  total flux cleaned = 0.000331428 Jy
! Component: 3550  -  total flux cleaned = 0.00039487 Jy
! Component: 3600  -  total flux cleaned = 0.000363227 Jy
! Component: 3650  -  total flux cleaned = 0.000394698 Jy
! Component: 3700  -  total flux cleaned = 0.000426129 Jy
! Component: 3750  -  total flux cleaned = 0.000394963 Jy
! Component: 3800  -  total flux cleaned = 0.000503542 Jy
! Component: 3850  -  total flux cleaned = 0.000518932 Jy
! Component: 3900  -  total flux cleaned = 0.000565148 Jy
! Component: 3950  -  total flux cleaned = 0.000595792 Jy
! Component: 4000  -  total flux cleaned = 0.000595775 Jy
! Component: 4050  -  total flux cleaned = 0.000656434 Jy
! Total flux subtracted in 4096 components = 0.000732057 Jy
! Clean residual min=-0.000980 max=0.001004 Jy/beam
! Clean residual mean=0.000000 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.14195 Jy
keep
! Adding 336 model components to the UV plane model.
! The established model now contains 381 components and 0.14195 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J0953+3225_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.478 x 3.606 at 16.23 degrees (North through East)
! Clean map  min=-0.0014951  max=0.12615 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J0953+3225_C_map.fits
wmodel /scr/pima/bu007_uvs/J0953+3225_C_map.mod
! Writing 381 model components to file: /scr/pima/bu007_uvs/J0953+3225_C_map.mod
wobs   /scr/pima/bu007_uvs/J0953+3225_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J0953+3225_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J0953+3225_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bu007_uvs/J0953+3225_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.126155 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000273563 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.650541 0.650541 1.30108 2.60216 5.20433 10.4087 20.8173 41.6346 83.2692
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.126 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  461.154 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J0953+3225_C_dfm.log closed on Sun Jun 24 02:19:34 2018