! Started logfile: /scr/pima/bu007_uvs/J0911+3033_C_dfm.log on Sun Jun 24 02:18:25 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J0911+3033_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J0911+3033_C_uva.fits
! AN table 1: 49 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.982313 visibilities/baseline/integration-bin.
! Found source: J0911+3033
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 17328 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0911+3033_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003284Jy  sigma=16.730765
! Fit after  self-cal, rms=0.956812Jy  sigma=15.935116
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.174 mas, bmaj=3.536 mas, bpa=19.31 degrees
! Estimated noise=0.634972 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0366024 Jy
! Component: 100  -  total flux cleaned = 0.0445841 Jy
! Total flux subtracted in 100 components = 0.0445841 Jy
! Clean residual min=-0.003765 max=0.003917 Jy/beam
! Clean residual mean=-0.000003 rms=0.000952 Jy/beam
! Combined flux in latest and established models = 0.0445841 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.0445841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083602Jy  sigma=1.361524
! Fit after  self-cal, rms=0.081358Jy  sigma=1.327239
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00468479 Jy
! Component: 100  -  total flux cleaned = 0.00552775 Jy
! Total flux subtracted in 100 components = 0.00552775 Jy
! Clean residual min=-0.003347 max=0.003283 Jy/beam
! Clean residual mean=-0.000003 rms=0.000835 Jy/beam
! Combined flux in latest and established models = 0.0501118 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0501118 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081111Jy  sigma=1.322176
! Fit after  self-cal, rms=0.081092Jy  sigma=1.321887
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.503 mas, bmaj=3.761 mas, bpa=19.35 degrees
! Estimated noise=0.333294 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00161026 Jy
! Component: 100  -  total flux cleaned = 0.00245443 Jy
! Component: 150  -  total flux cleaned = 0.00295194 Jy
! Component: 200  -  total flux cleaned = 0.00312666 Jy
! Total flux subtracted in 200 components = 0.00312666 Jy
! Clean residual min=-0.001973 max=0.002094 Jy/beam
! Clean residual mean=-0.000001 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.0532385 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 24 components and 0.0532385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081069Jy  sigma=1.321213
! Fit after  self-cal, rms=0.081051Jy  sigma=1.321122
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.503 x 3.761 at 19.35 degrees (North through East)
! Clean map  min=-0.0017487  max=0.051376 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.03     HN        1.01     KP        0.80     
!   LA        1.07     MK        0.96     NL        1.04     OV        1.04     
!   PT        0.99     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        0.90     KP        0.84     
!   LA        0.99     MK        1.04     NL        1.07     OV        1.03     
!   PT        0.90     SC        1.12     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.97     KP        0.97     
!   LA        0.96     MK        0.97     NL        1.08     OV        0.95     
!   PT        0.99     SC        1.19     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.06     KP        1.02     
!   LA        1.05     MK        0.94     NL        1.05     OV        0.97     
!   PT        0.97     SC        1.08     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        0.95     KP        0.90     
!   LA        1.11     MK        1.06     NL        0.97     OV        1.00     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.94     HN        1.04     KP        1.00     
!   LA        1.08     MK        0.95     NL        1.09     OV        1.01     
!   PT        0.93     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.02     KP        0.91     
!   LA        1.18     MK        1.08     NL        1.08     OV        1.00     
!   PT        0.97     SC        0.90     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.08     HN        0.96     KP        0.89     
!   LA        1.05     MK        1.07     NL        1.02     OV        0.95     
!   PT        0.94     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.081051Jy  sigma=1.321122
! Fit after  self-cal, rms=0.081018Jy  sigma=1.318606
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.508 mas, bmaj=3.766 mas, bpa=19.26 degrees
! Estimated noise=0.33017 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000294375 Jy
! Component: 100  -  total flux cleaned = -0.000307842 Jy
! Component: 150  -  total flux cleaned = -0.000329699 Jy
! Component: 200  -  total flux cleaned = -0.000347028 Jy
! Total flux subtracted in 200 components = -0.000347028 Jy
! Clean residual min=-0.001746 max=0.001713 Jy/beam
! Clean residual mean=-0.000004 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.0528915 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 31 components and 0.0528915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081013Jy  sigma=1.318569
! Fit after  self-cal, rms=0.081125Jy  sigma=1.317081
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081125Jy  sigma=1.317081
! Fit after  self-cal, rms=0.081341Jy  sigma=1.316860
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.507 mas, bmaj=3.768 mas, bpa=19.31 degrees
! Estimated noise=0.328464 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000256138 Jy
! Component: 100  -  total flux cleaned = -0.00027825 Jy
! Component: 150  -  total flux cleaned = -0.000295388 Jy
! Component: 200  -  total flux cleaned = -0.000309185 Jy
! Total flux subtracted in 200 components = -0.000309185 Jy
! Clean residual min=-0.001690 max=0.001696 Jy/beam
! Clean residual mean=-0.000004 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.0525823 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 38 components and 0.0525823 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081337Jy  sigma=1.316844
! Fit after  self-cal, rms=0.081414Jy  sigma=1.316689
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.98453e-05 Jy
! Component: 100  -  total flux cleaned = -7.23625e-05 Jy
! Component: 150  -  total flux cleaned = -6.72114e-05 Jy
! Component: 200  -  total flux cleaned = -6.22806e-05 Jy
! Total flux subtracted in 200 components = -6.22806e-05 Jy
! Clean residual min=-0.001680 max=0.001647 Jy/beam
! Clean residual mean=-0.000004 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.05252 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 44 components and 0.05252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081412Jy  sigma=1.316687
! Fit after  self-cal, rms=0.081416Jy  sigma=1.316677
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081416Jy  sigma=1.316677
! Fit after  self-cal, rms=0.081188Jy  sigma=1.316626
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.506 mas, bmaj=3.77 mas, bpa=19.37 degrees
! Estimated noise=0.32642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000290882 Jy
! Component: 100  -  total flux cleaned = -0.000365297 Jy
! Component: 150  -  total flux cleaned = -0.000378389 Jy
! Component: 200  -  total flux cleaned = -0.000373133 Jy
! Total flux subtracted in 200 components = -0.000373133 Jy
! Clean residual min=-0.001650 max=0.001630 Jy/beam
! Clean residual mean=-0.000004 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.0521469 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 51 components and 0.0521469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081185Jy  sigma=1.316620
! Fit after  self-cal, rms=0.081218Jy  sigma=1.316602
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.39085e-05 Jy
! Component: 100  -  total flux cleaned = -5.92769e-05 Jy
! Component: 150  -  total flux cleaned = -4.86996e-05 Jy
! Component: 200  -  total flux cleaned = -4.32019e-05 Jy
! Total flux subtracted in 200 components = -4.32019e-05 Jy
! Clean residual min=-0.001650 max=0.001618 Jy/beam
! Clean residual mean=-0.000004 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.0521037 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 51 components and 0.0521037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081217Jy  sigma=1.316601
! Fit after  self-cal, rms=0.081225Jy  sigma=1.316596
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081225Jy  sigma=1.316596
! Fit after  self-cal, rms=0.080832Jy  sigma=1.316571
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.419 mas, bmaj=4.897 mas, bpa=7.897 degrees
! Estimated noise=0.433348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000173083 Jy
! Component: 100  -  total flux cleaned = -0.00018461 Jy
! Component: 150  -  total flux cleaned = -0.000174996 Jy
! Component: 200  -  total flux cleaned = -0.000174965 Jy
! Total flux subtracted in 200 components = -0.000174965 Jy
! Clean residual min=-0.001941 max=0.002142 Jy/beam
! Clean residual mean=-0.000008 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.0519287 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 59 components and 0.0519287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.080832Jy  sigma=1.316605
! Fit after  self-cal, rms=0.080835Jy  sigma=1.316436
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.87066e-05 Jy
! Component: 100  -  total flux cleaned = 0.000128912 Jy
! Component: 150  -  total flux cleaned = 0.00013724 Jy
! Component: 200  -  total flux cleaned = 0.000144106 Jy
! Total flux subtracted in 200 components = 0.000144106 Jy
! Clean residual min=-0.001869 max=0.002090 Jy/beam
! Clean residual mean=-0.000009 rms=0.000557 Jy/beam
! Combined flux in latest and established models = 0.0520728 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 61 components and 0.0520728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.080836Jy  sigma=1.316482
! Fit after  self-cal, rms=0.080836Jy  sigma=1.316469
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.506 mas, bmaj=3.771 mas, bpa=19.41 degrees
! Estimated noise=0.324341 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.506 x 3.771 at 19.41 degrees (North through East)
! Clean map  min=-0.0014966  max=0.04993 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.177 mas, bmaj=3.539 mas, bpa=19.19 degrees
! Estimated noise=0.621825 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0383102 Jy
! Component: 100  -  total flux cleaned = 0.0466809 Jy
! Component: 150  -  total flux cleaned = 0.0483415 Jy
! Component: 200  -  total flux cleaned = 0.048215 Jy
! Total flux subtracted in 200 components = 0.048215 Jy
! Clean residual min=-0.003088 max=0.003132 Jy/beam
! Clean residual mean=-0.000005 rms=0.000790 Jy/beam
! Combined flux in latest and established models = 0.0482151 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0482151 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.506 mas, bmaj=3.771 mas, bpa=19.41 degrees
! Estimated noise=0.324341 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192838 Jy
! Component: 100  -  total flux cleaned = 0.00277808 Jy
! Component: 150  -  total flux cleaned = 0.00313104 Jy
! Component: 200  -  total flux cleaned = 0.0032709 Jy
! Total flux subtracted in 200 components = 0.0032709 Jy
! Clean residual min=-0.001631 max=0.001587 Jy/beam
! Clean residual mean=-0.000005 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.051486 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 24 components and 0.0514859 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.419 mas, bmaj=4.897 mas, bpa=7.897 degrees
! Estimated noise=0.433348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000459059 Jy
! Component: 100  -  total flux cleaned = 0.000549575 Jy
! Component: 150  -  total flux cleaned = 0.000561427 Jy
! Component: 200  -  total flux cleaned = 0.000561258 Jy
! Total flux subtracted in 200 components = 0.000561258 Jy
! Clean residual min=-0.001826 max=0.002101 Jy/beam
! Clean residual mean=-0.000009 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.0520472 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.88855e-06 Jy
! Component: 100  -  total flux cleaned = 1.81884e-05 Jy
! Component: 150  -  total flux cleaned = 2.59698e-05 Jy
! Component: 200  -  total flux cleaned = 3.31288e-05 Jy
! Total flux subtracted in 200 components = 3.31288e-05 Jy
! Clean residual min=-0.001827 max=0.002093 Jy/beam
! Clean residual mean=-0.000008 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.0520803 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 35 components and 0.0520803 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.506 mas, bmaj=3.771 mas, bpa=19.41 degrees
! Estimated noise=0.324341 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000227915 Jy
! Component: 100  -  total flux cleaned = -0.00021307 Jy
! Component: 150  -  total flux cleaned = -0.000212061 Jy
! Component: 200  -  total flux cleaned = -0.000201376 Jy
! Total flux subtracted in 200 components = -0.000201376 Jy
! Clean residual min=-0.001605 max=0.001608 Jy/beam
! Clean residual mean=-0.000004 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.051879 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 44 components and 0.051879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.080836Jy  sigma=1.316558
! Fit after  self-cal, rms=0.080833Jy  sigma=1.316532
wmodel J0911+3033_C_map.mod
! Writing 44 model components to file: J0911+3033_C_map.mod
wobs   J0911+3033_C_uvs.fits
! Writing UV FITS file: J0911+3033_C_uvs.fits
wwins  J0911+3033_C_map.win
! wwins: Wrote 1 windows to J0911+3033_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000210927 Jy
! Component: 100  -  total flux cleaned = -0.00046767 Jy
! Component: 150  -  total flux cleaned = -0.000467819 Jy
! Component: 200  -  total flux cleaned = -0.000545783 Jy
! Component: 250  -  total flux cleaned = -0.00059571 Jy
! Component: 300  -  total flux cleaned = -0.000693562 Jy
! Component: 350  -  total flux cleaned = -0.000764911 Jy
! Component: 400  -  total flux cleaned = -0.000880393 Jy
! Component: 450  -  total flux cleaned = -0.000947954 Jy
! Component: 500  -  total flux cleaned = -0.00108014 Jy
! Component: 550  -  total flux cleaned = -0.00112384 Jy
! Component: 600  -  total flux cleaned = -0.00120841 Jy
! Component: 650  -  total flux cleaned = -0.00125016 Jy
! Component: 700  -  total flux cleaned = -0.00137164 Jy
! Component: 750  -  total flux cleaned = -0.00145109 Jy
! Component: 800  -  total flux cleaned = -0.00149003 Jy
! Component: 850  -  total flux cleaned = -0.00149011 Jy
! Component: 900  -  total flux cleaned = -0.00156598 Jy
! Component: 950  -  total flux cleaned = -0.00160319 Jy
! Component: 1000  -  total flux cleaned = -0.00162145 Jy
! Component: 1050  -  total flux cleaned = -0.00169341 Jy
! Component: 1100  -  total flux cleaned = -0.00169351 Jy
! Component: 1150  -  total flux cleaned = -0.00172862 Jy
! Component: 1200  -  total flux cleaned = -0.00181445 Jy
! Component: 1250  -  total flux cleaned = -0.00186532 Jy
! Component: 1300  -  total flux cleaned = -0.00189881 Jy
! Component: 1350  -  total flux cleaned = -0.00196464 Jy
! Component: 1400  -  total flux cleaned = -0.00201344 Jy
! Component: 1450  -  total flux cleaned = -0.00204563 Jy
! Component: 1500  -  total flux cleaned = -0.0020614 Jy
! Component: 1550  -  total flux cleaned = -0.0020615 Jy
! Component: 1600  -  total flux cleaned = -0.00210802 Jy
! Component: 1650  -  total flux cleaned = -0.00207741 Jy
! Component: 1700  -  total flux cleaned = -0.00209253 Jy
! Component: 1750  -  total flux cleaned = -0.00210735 Jy
! Component: 1800  -  total flux cleaned = -0.00209238 Jy
! Component: 1850  -  total flux cleaned = -0.00207759 Jy
! Component: 1900  -  total flux cleaned = -0.00207752 Jy
! Component: 1950  -  total flux cleaned = -0.00202002 Jy
! Component: 2000  -  total flux cleaned = -0.00203448 Jy
! Component: 2050  -  total flux cleaned = -0.00203427 Jy
! Component: 2100  -  total flux cleaned = -0.00197839 Jy
! Component: 2150  -  total flux cleaned = -0.00193693 Jy
! Component: 2200  -  total flux cleaned = -0.0019097 Jy
! Component: 2250  -  total flux cleaned = -0.00188267 Jy
! Component: 2300  -  total flux cleaned = -0.00182901 Jy
! Component: 2350  -  total flux cleaned = -0.00180251 Jy
! Component: 2400  -  total flux cleaned = -0.00178948 Jy
! Component: 2450  -  total flux cleaned = -0.00176321 Jy
! Component: 2500  -  total flux cleaned = -0.00175032 Jy
! Component: 2550  -  total flux cleaned = -0.00177597 Jy
! Component: 2600  -  total flux cleaned = -0.00171199 Jy
! Component: 2650  -  total flux cleaned = -0.00169925 Jy
! Component: 2700  -  total flux cleaned = -0.00171187 Jy
! Component: 2750  -  total flux cleaned = -0.00168684 Jy
! Component: 2800  -  total flux cleaned = -0.00171168 Jy
! Component: 2850  -  total flux cleaned = -0.0016871 Jy
! Component: 2900  -  total flux cleaned = -0.00168707 Jy
! Component: 2950  -  total flux cleaned = -0.00171128 Jy
! Component: 3000  -  total flux cleaned = -0.00167505 Jy
! Component: 3050  -  total flux cleaned = -0.00168687 Jy
! Component: 3100  -  total flux cleaned = -0.00163926 Jy
! Component: 3150  -  total flux cleaned = -0.00165114 Jy
! Component: 3200  -  total flux cleaned = -0.00166286 Jy
! Component: 3250  -  total flux cleaned = -0.00163948 Jy
! Component: 3300  -  total flux cleaned = -0.00160478 Jy
! Component: 3350  -  total flux cleaned = -0.00162781 Jy
! Component: 3400  -  total flux cleaned = -0.00157063 Jy
! Component: 3450  -  total flux cleaned = -0.00155927 Jy
! Component: 3500  -  total flux cleaned = -0.00154802 Jy
! Component: 3550  -  total flux cleaned = -0.00153686 Jy
! Component: 3600  -  total flux cleaned = -0.00152561 Jy
! Component: 3650  -  total flux cleaned = -0.00151452 Jy
! Component: 3700  -  total flux cleaned = -0.00151454 Jy
! Component: 3750  -  total flux cleaned = -0.00149261 Jy
! Component: 3800  -  total flux cleaned = -0.00149252 Jy
! Component: 3850  -  total flux cleaned = -0.0014925 Jy
! Component: 3900  -  total flux cleaned = -0.00147096 Jy
! Component: 3950  -  total flux cleaned = -0.00151386 Jy
! Component: 4000  -  total flux cleaned = -0.00150315 Jy
! Component: 4050  -  total flux cleaned = -0.00151372 Jy
! Total flux subtracted in 4096 components = -0.00152425 Jy
! Clean residual min=-0.000698 max=0.000613 Jy/beam
! Clean residual mean=-0.000001 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.0503547 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 339 components and 0.0503547 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J0911+3033_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.506 x 3.771 at 19.41 degrees (North through East)
! Clean map  min=-0.0012504  max=0.049772 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J0911+3033_C_map.fits
wmodel /scr/pima/bu007_uvs/J0911+3033_C_map.mod
! Writing 339 model components to file: /scr/pima/bu007_uvs/J0911+3033_C_map.mod
wobs   /scr/pima/bu007_uvs/J0911+3033_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J0911+3033_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J0911+3033_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bu007_uvs/J0911+3033_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0497723 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000186088 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.12163 1.12163 2.24327 4.48654 8.97307 17.9461 35.8923 71.7846
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.049 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  267.466 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J0911+3033_C_dfm.log closed on Sun Jun 24 02:18:29 2018