! Started logfile: /scr/pima/bu007_uvs/J0759+3010_C_dfm.log on Sun Jun 24 02:17:25 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J0759+3010_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J0759+3010_C_uva.fits
! AN table 1: 43 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.862016 visibilities/baseline/integration-bin.
! Found source: J0759+3010
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 13344 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0759+3010_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 61 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007108Jy  sigma=16.354669
! Fit after  self-cal, rms=0.914630Jy  sigma=14.888844
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.147 mas, bmaj=3.12 mas, bpa=7.063 degrees
! Estimated noise=0.614736 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.068744 Jy
! Component: 100  -  total flux cleaned = 0.0849105 Jy
! Total flux subtracted in 100 components = 0.0849105 Jy
! Clean residual min=-0.003943 max=0.006433 Jy/beam
! Clean residual mean=-0.000001 rms=0.001014 Jy/beam
! Combined flux in latest and established models = 0.0849105 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0849105 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.092980Jy  sigma=1.382911
! Fit after  self-cal, rms=0.092674Jy  sigma=1.379217
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00746092 Jy
! Component: 100  -  total flux cleaned = 0.01165 Jy
! Total flux subtracted in 100 components = 0.01165 Jy
! Clean residual min=-0.003606 max=0.003666 Jy/beam
! Clean residual mean=0.000000 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.0965605 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.0965605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091950Jy  sigma=1.366763
! Fit after  self-cal, rms=0.091905Jy  sigma=1.366393
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.395 mas, bmaj=3.46 mas, bpa=6.122 degrees
! Estimated noise=0.401241 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00419628 Jy
! Component: 100  -  total flux cleaned = 0.00659646 Jy
! Component: 150  -  total flux cleaned = 0.00767231 Jy
! Component: 200  -  total flux cleaned = 0.00781572 Jy
! Total flux subtracted in 200 components = 0.00781572 Jy
! Clean residual min=-0.002399 max=0.002426 Jy/beam
! Clean residual mean=0.000003 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.104376 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 36 components and 0.104376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091705Jy  sigma=1.362810
! Fit after  self-cal, rms=0.091683Jy  sigma=1.362535
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.395 x 3.46 at 6.122 degrees (North through East)
! Clean map  min=-0.0022607  max=0.089506 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     HN        1.02     KP        0.95     
!   LA        1.02     MK        0.97     NL        0.99     OV        1.00     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.01     KP        0.97     
!   LA        1.09     MK        0.98     NL        0.93     OV        0.94     
!   PT        1.00     SC        1.06     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        0.94     
!   LA        0.99     MK        0.99     NL        1.04     OV        0.95     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.94     HN        1.02     KP        1.11     
!   LA        1.02     MK        1.04     NL        0.99     OV        0.94     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        1.16     KP        1.02     
!   LA        1.00     MK        1.01     NL        0.94     OV        0.97     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     HN        0.99     KP        0.98     
!   LA        1.02     MK        0.99     NL        1.00     OV        1.00     
!   PT        1.03     SC        1.02     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        1.08     KP        0.97     
!   LA        1.01     MK        1.05     NL        0.93     OV        1.02     
!   PT        0.95     SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.16     KP        0.98     
!   LA        1.08     MK        0.89     NL        0.99     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.091683Jy  sigma=1.362535
! Fit after  self-cal, rms=0.091909Jy  sigma=1.359343
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.398 mas, bmaj=3.477 mas, bpa=6.043 degrees
! Estimated noise=0.401287 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168959 Jy
! Component: 100  -  total flux cleaned = 0.000316885 Jy
! Component: 150  -  total flux cleaned = 0.00019439 Jy
! Component: 200  -  total flux cleaned = 0.000112993 Jy
! Total flux subtracted in 200 components = 0.000112993 Jy
! Clean residual min=-0.002422 max=0.002330 Jy/beam
! Clean residual mean=0.000003 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.104489 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 43 components and 0.104489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091881Jy  sigma=1.358877
! Fit after  self-cal, rms=0.091912Jy  sigma=1.358668
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091912Jy  sigma=1.358668
! Fit after  self-cal, rms=0.091635Jy  sigma=1.356685
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.4 mas, bmaj=3.482 mas, bpa=6.152 degrees
! Estimated noise=0.402461 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.08464e-05 Jy
! Component: 100  -  total flux cleaned = 7.28764e-05 Jy
! Component: 150  -  total flux cleaned = 7.45332e-05 Jy
! Component: 200  -  total flux cleaned = 1.81878e-05 Jy
! Total flux subtracted in 200 components = 1.81878e-05 Jy
! Clean residual min=-0.002276 max=0.002288 Jy/beam
! Clean residual mean=0.000002 rms=0.000529 Jy/beam
! Combined flux in latest and established models = 0.104507 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 51 components and 0.104507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091625Jy  sigma=1.356476
! Fit after  self-cal, rms=0.091625Jy  sigma=1.356407
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (41.4, 40.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00193671 Jy
! Component: 100  -  total flux cleaned = 0.00207312 Jy
! Component: 150  -  total flux cleaned = 0.00204755 Jy
! Component: 200  -  total flux cleaned = 0.00204878 Jy
! Total flux subtracted in 200 components = 0.00204878 Jy
! Clean residual min=-0.002152 max=0.002101 Jy/beam
! Clean residual mean=0.000003 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.106556 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 73 components and 0.106556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091570Jy  sigma=1.355554
! Fit after  self-cal, rms=0.091558Jy  sigma=1.355426
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091558Jy  sigma=1.355426
! Fit after  self-cal, rms=0.091131Jy  sigma=1.354883
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.398 mas, bmaj=3.484 mas, bpa=6.251 degrees
! Estimated noise=0.401733 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000874479 Jy
! Component: 100  -  total flux cleaned = 0.00104175 Jy
! Component: 150  -  total flux cleaned = 0.0010675 Jy
! Component: 200  -  total flux cleaned = 0.00104594 Jy
! Total flux subtracted in 200 components = 0.00104594 Jy
! Clean residual min=-0.002125 max=0.002021 Jy/beam
! Clean residual mean=0.000003 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.107602 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 76 components and 0.107602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091114Jy  sigma=1.354606
! Fit after  self-cal, rms=0.091117Jy  sigma=1.354551
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000257807 Jy
! Component: 100  -  total flux cleaned = 0.000258939 Jy
! Component: 150  -  total flux cleaned = 0.000240491 Jy
! Component: 200  -  total flux cleaned = 0.000240564 Jy
! Total flux subtracted in 200 components = 0.000240564 Jy
! Clean residual min=-0.002101 max=0.002003 Jy/beam
! Clean residual mean=0.000003 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.107843 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 85 components and 0.107843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091110Jy  sigma=1.354412
! Fit after  self-cal, rms=0.091109Jy  sigma=1.354405
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091109Jy  sigma=1.354405
! Fit after  self-cal, rms=0.091060Jy  sigma=1.354372
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.746 mas, bmaj=4.847 mas, bpa=3.934 degrees
! Estimated noise=0.539386 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000222022 Jy
! Component: 100  -  total flux cleaned = -0.000194739 Jy
! Component: 150  -  total flux cleaned = -0.000236419 Jy
! Component: 200  -  total flux cleaned = -0.000272913 Jy
! Total flux subtracted in 200 components = -0.000272913 Jy
! Clean residual min=-0.002973 max=0.002752 Jy/beam
! Clean residual mean=0.000007 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.10757 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 95 components and 0.10757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091063Jy  sigma=1.354480
! Fit after  self-cal, rms=0.091065Jy  sigma=1.354439
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113529 Jy
! Component: 100  -  total flux cleaned = -0.000114295 Jy
! Component: 150  -  total flux cleaned = -0.000115612 Jy
! Component: 200  -  total flux cleaned = -0.000115294 Jy
! Total flux subtracted in 200 components = -0.000115294 Jy
! Clean residual min=-0.002932 max=0.002701 Jy/beam
! Clean residual mean=0.000007 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.107454 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 98 components and 0.107454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091070Jy  sigma=1.354557
! Fit after  self-cal, rms=0.091071Jy  sigma=1.354544
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.398 mas, bmaj=3.485 mas, bpa=6.262 degrees
! Estimated noise=0.401668 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.398 x 3.485 at 6.262 degrees (North through East)
! Clean map  min=-0.0019756  max=0.088945 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.15 mas, bmaj=3.143 mas, bpa=7.197 degrees
! Estimated noise=0.617008 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0684008 Jy
! Component: 100  -  total flux cleaned = 0.0847856 Jy
! Component: 150  -  total flux cleaned = 0.0921474 Jy
! Component: 200  -  total flux cleaned = 0.0953298 Jy
! Total flux subtracted in 200 components = 0.0953298 Jy
! Clean residual min=-0.003821 max=0.003622 Jy/beam
! Clean residual mean=0.000000 rms=0.000889 Jy/beam
! Combined flux in latest and established models = 0.0953298 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0953298 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.398 mas, bmaj=3.485 mas, bpa=6.262 degrees
! Estimated noise=0.401668 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00473273 Jy
! Component: 100  -  total flux cleaned = 0.00777289 Jy
! Component: 150  -  total flux cleaned = 0.00987896 Jy
! Component: 200  -  total flux cleaned = 0.0109641 Jy
! Total flux subtracted in 200 components = 0.0109641 Jy
! Clean residual min=-0.002349 max=0.002116 Jy/beam
! Clean residual mean=0.000003 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.106294 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 41 components and 0.106294 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.746 mas, bmaj=4.847 mas, bpa=3.934 degrees
! Estimated noise=0.539386 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128209 Jy
! Component: 100  -  total flux cleaned = 0.00137189 Jy
! Component: 150  -  total flux cleaned = 0.00133441 Jy
! Component: 200  -  total flux cleaned = 0.00130518 Jy
! Total flux subtracted in 200 components = 0.00130518 Jy
! Clean residual min=-0.003034 max=0.002843 Jy/beam
! Clean residual mean=0.000007 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.107599 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.24483e-07 Jy
! Component: 100  -  total flux cleaned = 2.44275e-05 Jy
! Component: 150  -  total flux cleaned = 2.47466e-05 Jy
! Component: 200  -  total flux cleaned = 2.58472e-05 Jy
! Total flux subtracted in 200 components = 2.58472e-05 Jy
! Clean residual min=-0.002978 max=0.002766 Jy/beam
! Clean residual mean=0.000007 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.107625 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 70 components and 0.107625 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.398 mas, bmaj=3.485 mas, bpa=6.262 degrees
! Estimated noise=0.401668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0004928 Jy
! Component: 100  -  total flux cleaned = 0.000538346 Jy
! Component: 150  -  total flux cleaned = 0.000578357 Jy
! Component: 200  -  total flux cleaned = 0.00061493 Jy
! Total flux subtracted in 200 components = 0.00061493 Jy
! Clean residual min=-0.002182 max=0.001986 Jy/beam
! Clean residual mean=0.000003 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.10824 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 84 components and 0.10824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091091Jy  sigma=1.355024
! Fit after  self-cal, rms=0.091087Jy  sigma=1.354935
wmodel J0759+3010_C_map.mod
! Writing 84 model components to file: J0759+3010_C_map.mod
wobs   J0759+3010_C_uvs.fits
! Writing UV FITS file: J0759+3010_C_uvs.fits
wwins  J0759+3010_C_map.win
! wwins: Wrote 3 windows to J0759+3010_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000518216 Jy
! Component: 100  -  total flux cleaned = -0.000377951 Jy
! Component: 150  -  total flux cleaned = -0.000207957 Jy
! Component: 200  -  total flux cleaned = -1.08827e-05 Jy
! Component: 250  -  total flux cleaned = 0.000117426 Jy
! Component: 300  -  total flux cleaned = 0.000241603 Jy
! Component: 350  -  total flux cleaned = 0.000272043 Jy
! Component: 400  -  total flux cleaned = 0.000361041 Jy
! Component: 450  -  total flux cleaned = 0.000418957 Jy
! Component: 500  -  total flux cleaned = 0.000276989 Jy
! Component: 550  -  total flux cleaned = 0.000221318 Jy
! Component: 600  -  total flux cleaned = 0.000112151 Jy
! Component: 650  -  total flux cleaned = 0.000112418 Jy
! Component: 700  -  total flux cleaned = 3.26012e-05 Jy
! Component: 750  -  total flux cleaned = 3.27376e-05 Jy
! Component: 800  -  total flux cleaned = -4.49054e-05 Jy
! Component: 850  -  total flux cleaned = -4.52013e-05 Jy
! Component: 900  -  total flux cleaned = -0.000172033 Jy
! Component: 950  -  total flux cleaned = -0.000196845 Jy
! Component: 1000  -  total flux cleaned = -0.000296125 Jy
! Component: 1050  -  total flux cleaned = -0.000320358 Jy
! Component: 1100  -  total flux cleaned = -0.000296155 Jy
! Component: 1150  -  total flux cleaned = -0.000368201 Jy
! Component: 1200  -  total flux cleaned = -0.000463316 Jy
! Component: 1250  -  total flux cleaned = -0.000415849 Jy
! Component: 1300  -  total flux cleaned = -0.000509254 Jy
! Component: 1350  -  total flux cleaned = -0.000624891 Jy
! Component: 1400  -  total flux cleaned = -0.000647435 Jy
! Component: 1450  -  total flux cleaned = -0.00067022 Jy
! Component: 1500  -  total flux cleaned = -0.000760355 Jy
! Component: 1550  -  total flux cleaned = -0.000715804 Jy
! Component: 1600  -  total flux cleaned = -0.000871159 Jy
! Component: 1650  -  total flux cleaned = -0.000827252 Jy
! Component: 1700  -  total flux cleaned = -0.000849523 Jy
! Component: 1750  -  total flux cleaned = -0.000979061 Jy
! Component: 1800  -  total flux cleaned = -0.00104344 Jy
! Component: 1850  -  total flux cleaned = -0.00100038 Jy
! Component: 1900  -  total flux cleaned = -0.00114827 Jy
! Component: 1950  -  total flux cleaned = -0.00114825 Jy
! Component: 2000  -  total flux cleaned = -0.0012313 Jy
! Component: 2050  -  total flux cleaned = -0.00127241 Jy
! Component: 2100  -  total flux cleaned = -0.00133371 Jy
! Component: 2150  -  total flux cleaned = -0.00145559 Jy
! Component: 2200  -  total flux cleaned = -0.00143562 Jy
! Component: 2250  -  total flux cleaned = -0.00153576 Jy
! Component: 2300  -  total flux cleaned = -0.00157578 Jy
! Component: 2350  -  total flux cleaned = -0.00167429 Jy
! Component: 2400  -  total flux cleaned = -0.00169393 Jy
! Component: 2450  -  total flux cleaned = -0.00171336 Jy
! Component: 2500  -  total flux cleaned = -0.00175216 Jy
! Component: 2550  -  total flux cleaned = -0.00179057 Jy
! Component: 2600  -  total flux cleaned = -0.00186673 Jy
! Component: 2650  -  total flux cleaned = -0.00199918 Jy
! Component: 2700  -  total flux cleaned = -0.00199925 Jy
! Component: 2750  -  total flux cleaned = -0.00207409 Jy
! Component: 2800  -  total flux cleaned = -0.00211136 Jy
! Component: 2850  -  total flux cleaned = -0.00218513 Jy
! Component: 2900  -  total flux cleaned = -0.00220344 Jy
! Component: 2950  -  total flux cleaned = -0.00225832 Jy
! Component: 3000  -  total flux cleaned = -0.00229437 Jy
! Component: 3050  -  total flux cleaned = -0.00238443 Jy
! Component: 3100  -  total flux cleaned = -0.00245611 Jy
! Component: 3150  -  total flux cleaned = -0.00242046 Jy
! Component: 3200  -  total flux cleaned = -0.00245579 Jy
! Component: 3250  -  total flux cleaned = -0.00252599 Jy
! Component: 3300  -  total flux cleaned = -0.0025262 Jy
! Component: 3350  -  total flux cleaned = -0.00259587 Jy
! Component: 3400  -  total flux cleaned = -0.00254394 Jy
! Component: 3450  -  total flux cleaned = -0.00259559 Jy
! Component: 3500  -  total flux cleaned = -0.00257857 Jy
! Component: 3550  -  total flux cleaned = -0.0025616 Jy
! Component: 3600  -  total flux cleaned = -0.00262945 Jy
! Component: 3650  -  total flux cleaned = -0.00261248 Jy
! Component: 3700  -  total flux cleaned = -0.00264605 Jy
! Component: 3750  -  total flux cleaned = -0.00259601 Jy
! Component: 3800  -  total flux cleaned = -0.00264588 Jy
! Component: 3850  -  total flux cleaned = -0.00261294 Jy
! Component: 3900  -  total flux cleaned = -0.00272785 Jy
! Component: 3950  -  total flux cleaned = -0.00267876 Jy
! Component: 4000  -  total flux cleaned = -0.00266237 Jy
! Component: 4050  -  total flux cleaned = -0.00271111 Jy
! Total flux subtracted in 4096 components = -0.00267894 Jy
! Clean residual min=-0.000969 max=0.000910 Jy/beam
! Clean residual mean=0.000001 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.105561 Jy
keep
! Adding 332 model components to the UV plane model.
! The established model now contains 416 components and 0.105561 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J0759+3010_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.398 x 3.485 at 6.262 degrees (North through East)
! Clean map  min=-0.0016669  max=0.088935 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J0759+3010_C_map.fits
wmodel /scr/pima/bu007_uvs/J0759+3010_C_map.mod
! Writing 416 model components to file: /scr/pima/bu007_uvs/J0759+3010_C_map.mod
wobs   /scr/pima/bu007_uvs/J0759+3010_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J0759+3010_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J0759+3010_C_map.win
! wwins: Wrote 4 windows to /scr/pima/bu007_uvs/J0759+3010_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0889345 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000292471 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.986582 0.986582 1.97316 3.94633 7.89266 15.7853 31.5706 63.1413
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.088 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  304.08 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J0759+3010_C_dfm.log closed on Sun Jun 24 02:17:29 2018