! Started logfile: /scr/pima/bu007_uvs/J0751+3355_C_dfm.log on Sun Jun 24 02:17:16 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J0751+3355_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J0751+3355_C_uva.fits
! AN table 1: 50 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.977222 visibilities/baseline/integration-bin.
! Found source: J0751+3355
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 14072 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0751+3355_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 34 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007100Jy  sigma=16.433202
! Fit after  self-cal, rms=0.956920Jy  sigma=15.606394
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.154 mas, bmaj=4.213 mas, bpa=20.85 degrees
! Estimated noise=0.806289 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0372924 Jy
! Component: 100  -  total flux cleaned = 0.0455282 Jy
! Total flux subtracted in 100 components = 0.0455282 Jy
! Clean residual min=-0.004339 max=0.004271 Jy/beam
! Clean residual mean=0.000005 rms=0.001045 Jy/beam
! Combined flux in latest and established models = 0.0455282 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0455282 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086826Jy  sigma=1.327897
! Fit after  self-cal, rms=0.084787Jy  sigma=1.293268
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.476 mas, bmaj=4.301 mas, bpa=21.08 degrees
! Estimated noise=0.38527 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00483503 Jy
! Component: 100  -  total flux cleaned = 0.00678077 Jy
! Component: 150  -  total flux cleaned = 0.00780401 Jy
! Component: 200  -  total flux cleaned = 0.00842245 Jy
! Total flux subtracted in 200 components = 0.00842245 Jy
! Clean residual min=-0.001934 max=0.001940 Jy/beam
! Clean residual mean=0.000001 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.0539506 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 34 components and 0.0539506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084560Jy  sigma=1.288576
! Fit after  self-cal, rms=0.084538Jy  sigma=1.288136
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.476 x 4.301 at 21.08 degrees (North through East)
! Clean map  min=-0.0018862  max=0.050946 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     KP        0.75     LA        1.03     
!   MK        0.90     NL        1.07     OV        0.97     PT        1.00     
!   SC        0.96     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     KP        0.94     LA        0.97     
!   MK        1.01     NL        0.99     OV        1.09     PT        0.96     
!   SC        1.23     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     KP        0.95     LA        0.97     
!   MK        0.91     NL        1.05     OV        0.99     PT        0.94     
!   SC        1.15     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     KP        0.99     LA        1.00     
!   MK        1.12     NL        1.04     OV        0.96     PT        1.03     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.16     KP        0.94     LA        1.05     
!   MK        1.13     NL        0.93     OV        1.11     PT        1.07     
!   SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     KP        0.96     LA        1.05     
!   MK        1.06     NL        1.05     OV        0.99     PT        0.88     
!   SC        1.04     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     KP        0.92     LA        0.98     
!   MK        1.12     NL        0.90     OV        0.92     PT        1.00     
!   SC        0.95     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.91     KP        0.92     LA        1.22     
!   MK        1.06     NL        0.97     OV        1.12     PT        0.96     
!   SC        0.93     
! 
! 
! Fit before self-cal, rms=0.084538Jy  sigma=1.288136
! Fit after  self-cal, rms=0.085330Jy  sigma=1.284527
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.491 mas, bmaj=4.314 mas, bpa=21.2 degrees
! Estimated noise=0.383036 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000452478 Jy
! Component: 100  -  total flux cleaned = -0.000466996 Jy
! Component: 150  -  total flux cleaned = -0.000488629 Jy
! Component: 200  -  total flux cleaned = -0.000507035 Jy
! Total flux subtracted in 200 components = -0.000507035 Jy
! Clean residual min=-0.001746 max=0.001666 Jy/beam
! Clean residual mean=-0.000000 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.0534436 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 48 components and 0.0534436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085325Jy  sigma=1.284484
! Fit after  self-cal, rms=0.085484Jy  sigma=1.283767
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.085484Jy  sigma=1.283767
! Fit after  self-cal, rms=0.086433Jy  sigma=1.283582
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.495 mas, bmaj=4.326 mas, bpa=21.23 degrees
! Estimated noise=0.383119 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000383663 Jy
! Component: 100  -  total flux cleaned = -0.000395571 Jy
! Component: 150  -  total flux cleaned = -0.000405274 Jy
! Component: 200  -  total flux cleaned = -0.000405534 Jy
! Total flux subtracted in 200 components = -0.000405534 Jy
! Clean residual min=-0.001772 max=0.001662 Jy/beam
! Clean residual mean=-0.000000 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.0530381 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 53 components and 0.0530381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086429Jy  sigma=1.283550
! Fit after  self-cal, rms=0.086489Jy  sigma=1.283296
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0001212 Jy
! Component: 100  -  total flux cleaned = 0.000140841 Jy
! Component: 150  -  total flux cleaned = 0.00014925 Jy
! Component: 200  -  total flux cleaned = 0.000156563 Jy
! Total flux subtracted in 200 components = 0.000156563 Jy
! Clean residual min=-0.001796 max=0.001726 Jy/beam
! Clean residual mean=-0.000000 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.0531946 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 56 components and 0.0531946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086487Jy  sigma=1.283270
! Fit after  self-cal, rms=0.086471Jy  sigma=1.283082
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086471Jy  sigma=1.283082
! Fit after  self-cal, rms=0.086573Jy  sigma=1.283043
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.496 mas, bmaj=4.336 mas, bpa=21.21 degrees
! Estimated noise=0.382048 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000329213 Jy
! Component: 100  -  total flux cleaned = -0.000347665 Jy
! Component: 150  -  total flux cleaned = -0.000355512 Jy
! Component: 200  -  total flux cleaned = -0.000347778 Jy
! Total flux subtracted in 200 components = -0.000347778 Jy
! Clean residual min=-0.001733 max=0.001650 Jy/beam
! Clean residual mean=-0.000000 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.0528468 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 60 components and 0.0528469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086570Jy  sigma=1.283020
! Fit after  self-cal, rms=0.086588Jy  sigma=1.283010
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.97848e-05 Jy
! Component: 100  -  total flux cleaned = 2.72516e-05 Jy
! Component: 150  -  total flux cleaned = 2.72511e-05 Jy
! Component: 200  -  total flux cleaned = 2.73046e-05 Jy
! Total flux subtracted in 200 components = 2.73046e-05 Jy
! Clean residual min=-0.001726 max=0.001647 Jy/beam
! Clean residual mean=-0.000000 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.0528742 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 62 components and 0.0528742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086587Jy  sigma=1.282997
! Fit after  self-cal, rms=0.086589Jy  sigma=1.282995
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086589Jy  sigma=1.282995
! Fit after  self-cal, rms=0.086535Jy  sigma=1.282977
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.97 mas, bmaj=5.064 mas, bpa=15.46 degrees
! Estimated noise=0.481691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000311202 Jy
! Component: 100  -  total flux cleaned = -0.00032926 Jy
! Component: 150  -  total flux cleaned = -0.000336302 Jy
! Component: 200  -  total flux cleaned = -0.000342435 Jy
! Total flux subtracted in 200 components = -0.000342435 Jy
! Clean residual min=-0.001977 max=0.002004 Jy/beam
! Clean residual mean=-0.000001 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.0525317 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 70 components and 0.0525317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086535Jy  sigma=1.282975
! Fit after  self-cal, rms=0.086545Jy  sigma=1.282960
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.92818e-05 Jy
! Component: 100  -  total flux cleaned = 1.18701e-05 Jy
! Component: 150  -  total flux cleaned = 1.80848e-05 Jy
! Component: 200  -  total flux cleaned = 2.35033e-05 Jy
! Total flux subtracted in 200 components = 2.35033e-05 Jy
! Clean residual min=-0.001971 max=0.001999 Jy/beam
! Clean residual mean=-0.000001 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.0525552 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 70 components and 0.0525552 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086546Jy  sigma=1.282968
! Fit after  self-cal, rms=0.086550Jy  sigma=1.282963
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.495 mas, bmaj=4.345 mas, bpa=21.2 degrees
! Estimated noise=0.380999 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.495 x 4.345 at 21.2 degrees (North through East)
! Clean map  min=-0.00164  max=0.050337 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.168 mas, bmaj=4.242 mas, bpa=20.82 degrees
! Estimated noise=0.803271 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0388308 Jy
! Component: 100  -  total flux cleaned = 0.0473724 Jy
! Component: 150  -  total flux cleaned = 0.0504983 Jy
! Component: 200  -  total flux cleaned = 0.0506915 Jy
! Total flux subtracted in 200 components = 0.0506915 Jy
! Clean residual min=-0.003847 max=0.003524 Jy/beam
! Clean residual mean=0.000004 rms=0.000919 Jy/beam
! Combined flux in latest and established models = 0.0506915 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0506915 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.495 mas, bmaj=4.345 mas, bpa=21.2 degrees
! Estimated noise=0.380999 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131503 Jy
! Component: 100  -  total flux cleaned = 0.0015836 Jy
! Component: 150  -  total flux cleaned = 0.00169157 Jy
! Component: 200  -  total flux cleaned = 0.0017561 Jy
! Total flux subtracted in 200 components = 0.0017561 Jy
! Clean residual min=-0.001791 max=0.001601 Jy/beam
! Clean residual mean=-0.000000 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.0524476 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 29 components and 0.0524476 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.97 mas, bmaj=5.064 mas, bpa=15.46 degrees
! Estimated noise=0.481691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.58673e-05 Jy
! Component: 100  -  total flux cleaned = 0.000123059 Jy
! Component: 150  -  total flux cleaned = 0.000162677 Jy
! Component: 200  -  total flux cleaned = 0.000171253 Jy
! Total flux subtracted in 200 components = 0.000171253 Jy
! Clean residual min=-0.002014 max=0.001988 Jy/beam
! Clean residual mean=-0.000001 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.0526189 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.76557e-06 Jy
! Component: 100  -  total flux cleaned = -6.24297e-06 Jy
! Component: 150  -  total flux cleaned = -6.18788e-06 Jy
! Component: 200  -  total flux cleaned = -1.14411e-05 Jy
! Total flux subtracted in 200 components = -1.14411e-05 Jy
! Clean residual min=-0.001994 max=0.001982 Jy/beam
! Clean residual mean=-0.000001 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.0526074 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 47 components and 0.0526074 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.495 mas, bmaj=4.345 mas, bpa=21.2 degrees
! Estimated noise=0.380999 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.66364e-05 Jy
! Component: 100  -  total flux cleaned = 2.12309e-05 Jy
! Component: 150  -  total flux cleaned = -1.2266e-05 Jy
! Component: 200  -  total flux cleaned = -3.97958e-05 Jy
! Total flux subtracted in 200 components = -3.97958e-05 Jy
! Clean residual min=-0.001702 max=0.001609 Jy/beam
! Clean residual mean=-0.000000 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.0525676 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 55 components and 0.0525676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086548Jy  sigma=1.282960
! Fit after  self-cal, rms=0.086546Jy  sigma=1.282943
wmodel J0751+3355_C_map.mod
! Writing 55 model components to file: J0751+3355_C_map.mod
wobs   J0751+3355_C_uvs.fits
! Writing UV FITS file: J0751+3355_C_uvs.fits
wwins  J0751+3355_C_map.win
! wwins: Wrote 1 windows to J0751+3355_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000195908 Jy
! Component: 100  -  total flux cleaned = 0.000609859 Jy
! Component: 150  -  total flux cleaned = 0.000895443 Jy
! Component: 200  -  total flux cleaned = 0.0011203 Jy
! Component: 250  -  total flux cleaned = 0.00138469 Jy
! Component: 300  -  total flux cleaned = 0.00166421 Jy
! Component: 350  -  total flux cleaned = 0.0018461 Jy
! Component: 400  -  total flux cleaned = 0.00200181 Jy
! Component: 450  -  total flux cleaned = 0.0021751 Jy
! Component: 500  -  total flux cleaned = 0.00228139 Jy
! Component: 550  -  total flux cleaned = 0.00238545 Jy
! Component: 600  -  total flux cleaned = 0.00248775 Jy
! Component: 650  -  total flux cleaned = 0.0026474 Jy
! Component: 700  -  total flux cleaned = 0.00274494 Jy
! Component: 750  -  total flux cleaned = 0.00282227 Jy
! Component: 800  -  total flux cleaned = 0.00297427 Jy
! Component: 850  -  total flux cleaned = 0.00308626 Jy
! Component: 900  -  total flux cleaned = 0.00316 Jy
! Component: 950  -  total flux cleaned = 0.00321444 Jy
! Component: 1000  -  total flux cleaned = 0.0033219 Jy
! Component: 1050  -  total flux cleaned = 0.00339281 Jy
! Component: 1100  -  total flux cleaned = 0.00351468 Jy
! Component: 1150  -  total flux cleaned = 0.00356621 Jy
! Component: 1200  -  total flux cleaned = 0.00361735 Jy
! Component: 1250  -  total flux cleaned = 0.00371825 Jy
! Component: 1300  -  total flux cleaned = 0.00375127 Jy
! Component: 1350  -  total flux cleaned = 0.0038661 Jy
! Component: 1400  -  total flux cleaned = 0.00384987 Jy
! Component: 1450  -  total flux cleaned = 0.00394584 Jy
! Component: 1500  -  total flux cleaned = 0.00396178 Jy
! Component: 1550  -  total flux cleaned = 0.00402472 Jy
! Component: 1600  -  total flux cleaned = 0.00405573 Jy
! Component: 1650  -  total flux cleaned = 0.00407132 Jy
! Component: 1700  -  total flux cleaned = 0.00411733 Jy
! Component: 1750  -  total flux cleaned = 0.0041325 Jy
! Component: 1800  -  total flux cleaned = 0.00414758 Jy
! Component: 1850  -  total flux cleaned = 0.00416256 Jy
! Component: 1900  -  total flux cleaned = 0.00410349 Jy
! Component: 1950  -  total flux cleaned = 0.0041328 Jy
! Component: 2000  -  total flux cleaned = 0.00411821 Jy
! Component: 2050  -  total flux cleaned = 0.00414703 Jy
! Component: 2100  -  total flux cleaned = 0.00416124 Jy
! Component: 2150  -  total flux cleaned = 0.00413281 Jy
! Component: 2200  -  total flux cleaned = 0.00413275 Jy
! Component: 2250  -  total flux cleaned = 0.00410482 Jy
! Component: 2300  -  total flux cleaned = 0.00413266 Jy
! Component: 2350  -  total flux cleaned = 0.0042014 Jy
! Component: 2400  -  total flux cleaned = 0.00416046 Jy
! Component: 2450  -  total flux cleaned = 0.00417411 Jy
! Component: 2500  -  total flux cleaned = 0.00422802 Jy
! Component: 2550  -  total flux cleaned = 0.00425475 Jy
! Component: 2600  -  total flux cleaned = 0.00425473 Jy
! Component: 2650  -  total flux cleaned = 0.00426808 Jy
! Component: 2700  -  total flux cleaned = 0.00430756 Jy
! Component: 2750  -  total flux cleaned = 0.00432062 Jy
! Component: 2800  -  total flux cleaned = 0.0043596 Jy
! Component: 2850  -  total flux cleaned = 0.00438544 Jy
! Component: 2900  -  total flux cleaned = 0.00437253 Jy
! Component: 2950  -  total flux cleaned = 0.00439804 Jy
! Component: 3000  -  total flux cleaned = 0.00441065 Jy
! Component: 3050  -  total flux cleaned = 0.00442328 Jy
! Component: 3100  -  total flux cleaned = 0.00443576 Jy
! Component: 3150  -  total flux cleaned = 0.00444826 Jy
! Component: 3200  -  total flux cleaned = 0.00446074 Jy
! Component: 3250  -  total flux cleaned = 0.00448539 Jy
! Component: 3300  -  total flux cleaned = 0.00453448 Jy
! Component: 3350  -  total flux cleaned = 0.00453451 Jy
! Component: 3400  -  total flux cleaned = 0.00454675 Jy
! Component: 3450  -  total flux cleaned = 0.00451054 Jy
! Component: 3500  -  total flux cleaned = 0.00458268 Jy
! Component: 3550  -  total flux cleaned = 0.00458262 Jy
! Component: 3600  -  total flux cleaned = 0.00458249 Jy
! Component: 3650  -  total flux cleaned = 0.00457064 Jy
! Component: 3700  -  total flux cleaned = 0.00454715 Jy
! Component: 3750  -  total flux cleaned = 0.00454722 Jy
! Component: 3800  -  total flux cleaned = 0.00459395 Jy
! Component: 3850  -  total flux cleaned = 0.00458235 Jy
! Component: 3900  -  total flux cleaned = 0.00457086 Jy
! Component: 3950  -  total flux cleaned = 0.00457096 Jy
! Component: 4000  -  total flux cleaned = 0.00460533 Jy
! Component: 4050  -  total flux cleaned = 0.00458253 Jy
! Total flux subtracted in 4096 components = 0.00458251 Jy
! Clean residual min=-0.000664 max=0.000607 Jy/beam
! Clean residual mean=0.000001 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.0571501 Jy
keep
! Adding 249 model components to the UV plane model.
! The established model now contains 304 components and 0.0571501 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J0751+3355_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.495 x 4.345 at 21.2 degrees (North through East)
! Clean map  min=-0.0012182  max=0.05013 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J0751+3355_C_map.fits
wmodel /scr/pima/bu007_uvs/J0751+3355_C_map.mod
! Writing 304 model components to file: /scr/pima/bu007_uvs/J0751+3355_C_map.mod
wobs   /scr/pima/bu007_uvs/J0751+3355_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J0751+3355_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J0751+3355_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bu007_uvs/J0751+3355_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0501297 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000188849 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.13016 1.13016 2.26032 4.52064 9.04128 18.0826 36.1651 72.3302
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.05 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  265.449 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J0751+3355_C_dfm.log closed on Sun Jun 24 02:17:20 2018