! Started logfile: /scr/pima/bu007_uvs/J0736+2954_C_dfm.log on Sun Jun 24 02:16:57 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J0736+2954_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J0736+2954_C_uva.fits
! AN table 1: 44 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.766667 visibilities/baseline/integration-bin.
! Found source: J0736+2954
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 12144 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0736+2954_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 91 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.044840Jy  sigma=15.324787
! Fit after  self-cal, rms=0.726043Jy  sigma=10.692427
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.151 mas, bmaj=3.143 mas, bpa=6.227 degrees
! Estimated noise=0.748619 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.209801 Jy
! Component: 100  -  total flux cleaned = 0.259022 Jy
! Total flux subtracted in 100 components = 0.259022 Jy
! Clean residual min=-0.009505 max=0.019049 Jy/beam
! Clean residual mean=-0.000007 rms=0.001810 Jy/beam
! Combined flux in latest and established models = 0.259022 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.259022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091353Jy  sigma=1.309851
! Fit after  self-cal, rms=0.091328Jy  sigma=1.309660
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0221134 Jy
! Component: 100  -  total flux cleaned = 0.0358327 Jy
! Total flux subtracted in 100 components = 0.0358327 Jy
! Clean residual min=-0.005213 max=0.007181 Jy/beam
! Clean residual mean=-0.000003 rms=0.001125 Jy/beam
! Combined flux in latest and established models = 0.294855 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 18 components and 0.294855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084388Jy  sigma=1.208308
! Fit after  self-cal, rms=0.084318Jy  sigma=1.207689
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00906488 Jy
! Component: 100  -  total flux cleaned = 0.0149476 Jy
! Total flux subtracted in 100 components = 0.0149476 Jy
! Clean residual min=-0.003941 max=0.004387 Jy/beam
! Clean residual mean=-0.000002 rms=0.000962 Jy/beam
! Combined flux in latest and established models = 0.309802 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 22 components and 0.309802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083130Jy  sigma=1.190494
! Fit after  self-cal, rms=0.083100Jy  sigma=1.190249
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.362 mas, bmaj=3.391 mas, bpa=4.938 degrees
! Estimated noise=0.478968 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.3, 3.3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00650535 Jy
! Component: 100  -  total flux cleaned = 0.0110217 Jy
! Component: 150  -  total flux cleaned = 0.0146104 Jy
! Component: 200  -  total flux cleaned = 0.017529 Jy
! Total flux subtracted in 200 components = 0.017529 Jy
! Clean residual min=-0.003094 max=0.003578 Jy/beam
! Clean residual mean=0.000001 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.327331 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 45 components and 0.327331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.082425Jy  sigma=1.180022
! Fit after  self-cal, rms=0.082402Jy  sigma=1.179786
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.362 x 3.391 at 4.938 degrees (North through East)
! Clean map  min=-0.0028993  max=0.27671 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        0.99     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.01     OV        0.98     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.03     KP        1.00     
!   LA        0.98     MK        1.01     NL        0.99     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.05     KP        1.03     
!   LA        0.98     MK        0.99     NL        1.03     OV        0.98     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        1.03     KP        1.00     
!   LA        0.97     MK        1.03     NL        1.02     OV        0.98     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.05     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.00     OV        0.99     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        0.98     KP        1.00     
!   LA        0.97     MK        1.01     NL        1.02     OV        1.00     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.94     HN        0.98     KP        1.00     
!   LA        1.01     MK        1.02     NL        1.00     OV        0.99     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.00     KP        0.99     
!   LA        1.00     MK        1.02     NL        1.01     OV        0.97     
!   PT        1.00     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.082402Jy  sigma=1.179786
! Fit after  self-cal, rms=0.082031Jy  sigma=1.173533
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.372 mas, bmaj=3.407 mas, bpa=4.983 degrees
! Estimated noise=0.479796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00222395 Jy
! Component: 100  -  total flux cleaned = 0.00337722 Jy
! Component: 150  -  total flux cleaned = 0.00392931 Jy
! Component: 200  -  total flux cleaned = 0.0042168 Jy
! Total flux subtracted in 200 components = 0.0042168 Jy
! Clean residual min=-0.002612 max=0.002925 Jy/beam
! Clean residual mean=0.000003 rms=0.000659 Jy/beam
! Combined flux in latest and established models = 0.331548 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 68 components and 0.331548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081956Jy  sigma=1.172234
! Fit after  self-cal, rms=0.081946Jy  sigma=1.172164
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081946Jy  sigma=1.172164
! Fit after  self-cal, rms=0.081714Jy  sigma=1.168831
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.372 mas, bmaj=3.409 mas, bpa=4.969 degrees
! Estimated noise=0.479617 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000619332 Jy
! Component: 100  -  total flux cleaned = 0.000842497 Jy
! Component: 150  -  total flux cleaned = 0.00103432 Jy
! Component: 200  -  total flux cleaned = 0.00123504 Jy
! Total flux subtracted in 200 components = 0.00123504 Jy
! Clean residual min=-0.002483 max=0.002642 Jy/beam
! Clean residual mean=0.000001 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.332783 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 78 components and 0.332783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081690Jy  sigma=1.168342
! Fit after  self-cal, rms=0.081692Jy  sigma=1.168319
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3, 25.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00245808 Jy
! Component: 100  -  total flux cleaned = 0.00374813 Jy
! Component: 150  -  total flux cleaned = 0.00424596 Jy
! Component: 200  -  total flux cleaned = 0.00445783 Jy
! Total flux subtracted in 200 components = 0.00445783 Jy
! Clean residual min=-0.002284 max=0.002358 Jy/beam
! Clean residual mean=0.000002 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.337241 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 95 components and 0.337241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081609Jy  sigma=1.167107
! Fit after  self-cal, rms=0.081605Jy  sigma=1.167026
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081605Jy  sigma=1.167026
! Fit after  self-cal, rms=0.081497Jy  sigma=1.166668
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.373 mas, bmaj=3.411 mas, bpa=4.944 degrees
! Estimated noise=0.478986 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000713984 Jy
! Component: 100  -  total flux cleaned = 0.000963755 Jy
! Component: 150  -  total flux cleaned = 0.000963134 Jy
! Component: 200  -  total flux cleaned = 0.000991571 Jy
! Total flux subtracted in 200 components = 0.000991571 Jy
! Clean residual min=-0.002192 max=0.002422 Jy/beam
! Clean residual mean=0.000001 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.338233 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 104 components and 0.338233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081474Jy  sigma=1.166293
! Fit after  self-cal, rms=0.081476Jy  sigma=1.166278
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.6, -35.7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136399 Jy
! Component: 100  -  total flux cleaned = 0.00120873 Jy
! Component: 150  -  total flux cleaned = 0.00124747 Jy
! Component: 200  -  total flux cleaned = 0.00145847 Jy
! Total flux subtracted in 200 components = 0.00145847 Jy
! Clean residual min=-0.002126 max=0.002040 Jy/beam
! Clean residual mean=0.000001 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.339691 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 122 components and 0.339691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081407Jy  sigma=1.165274
! Fit after  self-cal, rms=0.081404Jy  sigma=1.165233
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081404Jy  sigma=1.165233
! Fit after  self-cal, rms=0.081376Jy  sigma=1.165184
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.625 mas, bmaj=4.844 mas, bpa=0.9183 degrees
! Estimated noise=0.652209 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000820258 Jy
! Component: 100  -  total flux cleaned = 0.00116105 Jy
! Component: 150  -  total flux cleaned = 0.00136722 Jy
! Component: 200  -  total flux cleaned = 0.00150048 Jy
! Total flux subtracted in 200 components = 0.00150048 Jy
! Clean residual min=-0.002448 max=0.002914 Jy/beam
! Clean residual mean=0.000004 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.341192 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 136 components and 0.341192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081368Jy  sigma=1.165021
! Fit after  self-cal, rms=0.081368Jy  sigma=1.164995
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167952 Jy
! Component: 100  -  total flux cleaned = 0.000268623 Jy
! Component: 150  -  total flux cleaned = 0.000383978 Jy
! Component: 200  -  total flux cleaned = 0.000449771 Jy
! Total flux subtracted in 200 components = 0.000449771 Jy
! Clean residual min=-0.002448 max=0.002895 Jy/beam
! Clean residual mean=0.000004 rms=0.000695 Jy/beam
! Combined flux in latest and established models = 0.341641 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 143 components and 0.341641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081366Jy  sigma=1.164950
! Fit after  self-cal, rms=0.081366Jy  sigma=1.164941
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.373 mas, bmaj=3.411 mas, bpa=4.956 degrees
! Estimated noise=0.478747 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.373 x 3.411 at 4.956 degrees (North through East)
! Clean map  min=-0.001833  max=0.27653 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.158 mas, bmaj=3.159 mas, bpa=6.212 degrees
! Estimated noise=0.751607 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.209559 Jy
! Component: 100  -  total flux cleaned = 0.258596 Jy
! Component: 150  -  total flux cleaned = 0.279485 Jy
! Component: 200  -  total flux cleaned = 0.292393 Jy
! Total flux subtracted in 200 components = 0.292393 Jy
! Clean residual min=-0.005113 max=0.006735 Jy/beam
! Clean residual mean=-0.000003 rms=0.001071 Jy/beam
! Combined flux in latest and established models = 0.292393 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.292393 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.373 mas, bmaj=3.411 mas, bpa=4.956 degrees
! Estimated noise=0.478747 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102344 Jy
! Component: 100  -  total flux cleaned = 0.0169145 Jy
! Component: 150  -  total flux cleaned = 0.0219017 Jy
! Component: 200  -  total flux cleaned = 0.0259733 Jy
! Total flux subtracted in 200 components = 0.0259733 Jy
! Clean residual min=-0.003118 max=0.003226 Jy/beam
! Clean residual mean=-0.000002 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.318366 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 48 components and 0.318366 Jy
! Inverting map 
! Added new window around map position (4.8, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0036799 Jy
! Component: 100  -  total flux cleaned = 0.00670447 Jy
! Component: 150  -  total flux cleaned = 0.00931785 Jy
! Component: 200  -  total flux cleaned = 0.0116037 Jy
! Total flux subtracted in 200 components = 0.0116037 Jy
! Clean residual min=-0.002666 max=0.002444 Jy/beam
! Clean residual mean=-0.000001 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 0.32997 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 65 components and 0.32997 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.625 mas, bmaj=4.844 mas, bpa=0.9183 degrees
! Estimated noise=0.652209 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00294589 Jy
! Component: 100  -  total flux cleaned = 0.00464177 Jy
! Component: 150  -  total flux cleaned = 0.00601221 Jy
! Component: 200  -  total flux cleaned = 0.00720097 Jy
! Total flux subtracted in 200 components = 0.00720097 Jy
! Clean residual min=-0.002693 max=0.002794 Jy/beam
! Clean residual mean=0.000003 rms=0.000727 Jy/beam
! Combined flux in latest and established models = 0.337171 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000996661 Jy
! Component: 100  -  total flux cleaned = 0.00176523 Jy
! Component: 150  -  total flux cleaned = 0.00228615 Jy
! Component: 200  -  total flux cleaned = 0.00258585 Jy
! Total flux subtracted in 200 components = 0.00258585 Jy
! Clean residual min=-0.002565 max=0.002838 Jy/beam
! Clean residual mean=0.000004 rms=0.000687 Jy/beam
! Combined flux in latest and established models = 0.339756 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 123 components and 0.339756 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.373 mas, bmaj=3.411 mas, bpa=4.956 degrees
! Estimated noise=0.478747 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000824179 Jy
! Component: 100  -  total flux cleaned = -0.000879886 Jy
! Component: 150  -  total flux cleaned = -0.000765131 Jy
! Component: 200  -  total flux cleaned = -0.000712175 Jy
! Total flux subtracted in 200 components = -0.000712175 Jy
! Clean residual min=-0.002135 max=0.002124 Jy/beam
! Clean residual mean=0.000001 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.339044 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 145 components and 0.339044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.081423Jy  sigma=1.165791
! Fit after  self-cal, rms=0.081406Jy  sigma=1.165600
wmodel J0736+2954_C_map.mod
! Writing 145 model components to file: J0736+2954_C_map.mod
wobs   J0736+2954_C_uvs.fits
! Writing UV FITS file: J0736+2954_C_uvs.fits
wwins  J0736+2954_C_map.win
! wwins: Wrote 5 windows to J0736+2954_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.04628e-05 Jy
! Component: 100  -  total flux cleaned = -0.000392378 Jy
! Component: 150  -  total flux cleaned = -0.000667114 Jy
! Component: 200  -  total flux cleaned = -0.000867334 Jy
! Component: 250  -  total flux cleaned = -0.00106174 Jy
! Component: 300  -  total flux cleaned = -0.00131554 Jy
! Component: 350  -  total flux cleaned = -0.0015327 Jy
! Component: 400  -  total flux cleaned = -0.00171541 Jy
! Component: 450  -  total flux cleaned = -0.0018645 Jy
! Component: 500  -  total flux cleaned = -0.00177693 Jy
! Component: 550  -  total flux cleaned = -0.00172002 Jy
! Component: 600  -  total flux cleaned = -0.00172027 Jy
! Component: 650  -  total flux cleaned = -0.00172021 Jy
! Component: 700  -  total flux cleaned = -0.00158258 Jy
! Component: 750  -  total flux cleaned = -0.0015012 Jy
! Component: 800  -  total flux cleaned = -0.00144772 Jy
! Component: 850  -  total flux cleaned = -0.0013945 Jy
! Component: 900  -  total flux cleaned = -0.00126476 Jy
! Component: 950  -  total flux cleaned = -0.00131598 Jy
! Component: 1000  -  total flux cleaned = -0.00121428 Jy
! Component: 1050  -  total flux cleaned = -0.00111438 Jy
! Component: 1100  -  total flux cleaned = -0.00113969 Jy
! Component: 1150  -  total flux cleaned = -0.00113991 Jy
! Component: 1200  -  total flux cleaned = -0.00121249 Jy
! Component: 1250  -  total flux cleaned = -0.00114085 Jy
! Component: 1300  -  total flux cleaned = -0.00116399 Jy
! Component: 1350  -  total flux cleaned = -0.00118751 Jy
! Component: 1400  -  total flux cleaned = -0.00123368 Jy
! Component: 1450  -  total flux cleaned = -0.00125666 Jy
! Component: 1500  -  total flux cleaned = -0.00125683 Jy
! Component: 1550  -  total flux cleaned = -0.00130181 Jy
! Component: 1600  -  total flux cleaned = -0.00127952 Jy
! Component: 1650  -  total flux cleaned = -0.0012132 Jy
! Component: 1700  -  total flux cleaned = -0.00125693 Jy
! Component: 1750  -  total flux cleaned = -0.00130003 Jy
! Component: 1800  -  total flux cleaned = -0.00125675 Jy
! Component: 1850  -  total flux cleaned = -0.00121414 Jy
! Component: 1900  -  total flux cleaned = -0.00119296 Jy
! Component: 1950  -  total flux cleaned = -0.00119326 Jy
! Component: 2000  -  total flux cleaned = -0.00119338 Jy
! Component: 2050  -  total flux cleaned = -0.00131702 Jy
! Component: 2100  -  total flux cleaned = -0.00129656 Jy
! Component: 2150  -  total flux cleaned = -0.00137766 Jy
! Component: 2200  -  total flux cleaned = -0.00131719 Jy
! Component: 2250  -  total flux cleaned = -0.0012975 Jy
! Component: 2300  -  total flux cleaned = -0.00135687 Jy
! Component: 2350  -  total flux cleaned = -0.00123911 Jy
! Component: 2400  -  total flux cleaned = -0.0013169 Jy
! Component: 2450  -  total flux cleaned = -0.00129777 Jy
! Component: 2500  -  total flux cleaned = -0.00129785 Jy
! Component: 2550  -  total flux cleaned = -0.00137395 Jy
! Component: 2600  -  total flux cleaned = -0.00139271 Jy
! Component: 2650  -  total flux cleaned = -0.00131749 Jy
! Component: 2700  -  total flux cleaned = -0.00131743 Jy
! Component: 2750  -  total flux cleaned = -0.00142858 Jy
! Component: 2800  -  total flux cleaned = -0.00137333 Jy
! Component: 2850  -  total flux cleaned = -0.00135496 Jy
! Component: 2900  -  total flux cleaned = -0.00137318 Jy
! Component: 2950  -  total flux cleaned = -0.00128299 Jy
! Component: 3000  -  total flux cleaned = -0.00140838 Jy
! Component: 3050  -  total flux cleaned = -0.00144385 Jy
! Component: 3100  -  total flux cleaned = -0.00142622 Jy
! Component: 3150  -  total flux cleaned = -0.00139113 Jy
! Component: 3200  -  total flux cleaned = -0.00147836 Jy
! Component: 3250  -  total flux cleaned = -0.00142642 Jy
! Component: 3300  -  total flux cleaned = -0.00140947 Jy
! Component: 3350  -  total flux cleaned = -0.00144374 Jy
! Component: 3400  -  total flux cleaned = -0.00146058 Jy
! Component: 3450  -  total flux cleaned = -0.00147733 Jy
! Component: 3500  -  total flux cleaned = -0.00154443 Jy
! Component: 3550  -  total flux cleaned = -0.00152766 Jy
! Component: 3600  -  total flux cleaned = -0.00157746 Jy
! Component: 3650  -  total flux cleaned = -0.00161036 Jy
! Component: 3700  -  total flux cleaned = -0.00165956 Jy
! Component: 3750  -  total flux cleaned = -0.00170847 Jy
! Component: 3800  -  total flux cleaned = -0.00161129 Jy
! Component: 3850  -  total flux cleaned = -0.00167563 Jy
! Component: 3900  -  total flux cleaned = -0.00172349 Jy
! Component: 3950  -  total flux cleaned = -0.00180312 Jy
! Component: 4000  -  total flux cleaned = -0.00185051 Jy
! Component: 4050  -  total flux cleaned = -0.0018977 Jy
! Total flux subtracted in 4096 components = -0.00200715 Jy
! Clean residual min=-0.000832 max=0.001050 Jy/beam
! Clean residual mean=0.000000 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.337037 Jy
keep
! Adding 312 model components to the UV plane model.
! The established model now contains 457 components and 0.337037 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J0736+2954_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.373 x 3.411 at 4.956 degrees (North through East)
! Clean map  min=-0.0015318  max=0.27664 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J0736+2954_C_map.fits
wmodel /scr/pima/bu007_uvs/J0736+2954_C_map.mod
! Writing 457 model components to file: /scr/pima/bu007_uvs/J0736+2954_C_map.mod
wobs   /scr/pima/bu007_uvs/J0736+2954_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J0736+2954_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J0736+2954_C_map.win
! wwins: Wrote 6 windows to /scr/pima/bu007_uvs/J0736+2954_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.276637 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000278185 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.301679 0.301679 0.603358 1.20672 2.41343 4.82686 9.65372 19.3074 38.6149 77.2298
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.276 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  994.435 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J0736+2954_C_dfm.log closed on Sun Jun 24 02:17:01 2018