! Started logfile: /scr/pima/bu007_uvs/J0657+3119_C_dfm.log on Sun Jun 24 02:16:48 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.60049
obs     /scr/pima/bu007_uvs/J0657+3119_C_uva.fits
! Reading UV FITS file: /scr/pima/bu007_uvs/J0657+3119_C_uva.fits
! AN table 1: 52 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.882479 visibilities/baseline/integration-bin.
! Found source: J0657+3119
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  4.60049e+09        8e+06          1        8e+06
!  02        2  4.73049e+09        8e+06          1        8e+06
!  03        3  4.84049e+09        8e+06          1        8e+06
!  04        4  4.93049e+09        8e+06          1        8e+06
!  05        5  5.00049e+09        8e+06          1        8e+06
!  06        6  5.05049e+09        8e+06          1        8e+06
!  07        7  5.08049e+09        8e+06          1        8e+06
!  08        8  5.09049e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 13216 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0657+3119_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006805Jy  sigma=15.496633
! Fit after  self-cal, rms=0.932574Jy  sigma=14.354998
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.092 mas, bmaj=3.709 mas, bpa=14.01 degrees
! Estimated noise=0.817375 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0549119 Jy
! Component: 100  -  total flux cleaned = 0.0673142 Jy
! Total flux subtracted in 100 components = 0.0673142 Jy
! Clean residual min=-0.004911 max=0.004907 Jy/beam
! Clean residual mean=-0.000000 rms=0.001143 Jy/beam
! Combined flux in latest and established models = 0.0673142 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0673142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.089396Jy  sigma=1.285802
! Fit after  self-cal, rms=0.088412Jy  sigma=1.272927
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.36 mas, bmaj=3.909 mas, bpa=13.89 degrees
! Estimated noise=0.414716 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00582504 Jy
! Component: 100  -  total flux cleaned = 0.00824994 Jy
! Component: 150  -  total flux cleaned = 0.00959479 Jy
! Component: 200  -  total flux cleaned = 0.0102057 Jy
! Total flux subtracted in 200 components = 0.0102057 Jy
! Clean residual min=-0.002798 max=0.002683 Jy/beam
! Clean residual mean=-0.000002 rms=0.000644 Jy/beam
! Combined flux in latest and established models = 0.0775199 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 18 components and 0.0775199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.088071Jy  sigma=1.267142
! Fit after  self-cal, rms=0.088027Jy  sigma=1.266820
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.36 x 3.909 at 13.89 degrees (North through East)
! Clean map  min=-0.0027122  max=0.072552 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.87     KP        0.98     LA        0.98     
!   MK        0.96     NL        1.04     OV        0.96     PT        0.92     
!   SC        1.05     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.08     KP        0.91     LA        0.98     
!   MK        1.00     NL        1.00     OV        1.00     PT        0.97     
!   SC        1.04     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.88     KP        0.98     LA        1.04     
!   MK        0.97     NL        1.09     OV        1.00     PT        1.00     
!   SC        1.03     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.95     KP        1.01     LA        1.00     
!   MK        0.98     NL        1.02     OV        1.04     PT        0.97     
!   SC        0.97     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.93     KP        1.03     LA        1.02     
!   MK        1.02     NL        0.93     OV        1.17     PT        0.99     
!   SC        0.96     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.92     KP        1.01     LA        1.02     
!   MK        0.91     NL        1.03     OV        1.08     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     KP        1.02     LA        1.04     
!   MK        0.97     NL        1.02     OV        1.11     PT        0.95     
!   SC        1.09     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.91     KP        0.97     LA        1.09     
!   MK        0.95     NL        0.95     OV        1.11     PT        1.07     
!   SC        0.97     
! 
! 
! Fit before self-cal, rms=0.088027Jy  sigma=1.266820
! Fit after  self-cal, rms=0.087622Jy  sigma=1.261925
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.36 mas, bmaj=3.893 mas, bpa=13.66 degrees
! Estimated noise=0.411768 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000912001 Jy
! Component: 100  -  total flux cleaned = 0.00102027 Jy
! Component: 150  -  total flux cleaned = 0.00108832 Jy
! Component: 200  -  total flux cleaned = 0.00112822 Jy
! Total flux subtracted in 200 components = 0.00112822 Jy
! Clean residual min=-0.002451 max=0.002275 Jy/beam
! Clean residual mean=-0.000003 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.0786481 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 26 components and 0.0786481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087606Jy  sigma=1.261594
! Fit after  self-cal, rms=0.087648Jy  sigma=1.260975
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087648Jy  sigma=1.260975
! Fit after  self-cal, rms=0.087790Jy  sigma=1.260911
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.357 mas, bmaj=3.886 mas, bpa=13.63 degrees
! Estimated noise=0.411687 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00051972 Jy
! Component: 100  -  total flux cleaned = 0.00054255 Jy
! Component: 150  -  total flux cleaned = 0.00057635 Jy
! Component: 200  -  total flux cleaned = 0.000621174 Jy
! Total flux subtracted in 200 components = 0.000621174 Jy
! Clean residual min=-0.002429 max=0.002239 Jy/beam
! Clean residual mean=-0.000003 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.0792693 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 28 components and 0.0792693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087780Jy  sigma=1.260733
! Fit after  self-cal, rms=0.087793Jy  sigma=1.260677
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.64976e-05 Jy
! Component: 100  -  total flux cleaned = 4.66725e-05 Jy
! Component: 150  -  total flux cleaned = 4.71508e-05 Jy
! Component: 200  -  total flux cleaned = 8.05294e-05 Jy
! Total flux subtracted in 200 components = 8.05294e-05 Jy
! Clean residual min=-0.002403 max=0.002216 Jy/beam
! Clean residual mean=-0.000003 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.0793498 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 32 components and 0.0793498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087787Jy  sigma=1.260588
! Fit after  self-cal, rms=0.087783Jy  sigma=1.260552
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087783Jy  sigma=1.260552
! Fit after  self-cal, rms=0.087646Jy  sigma=1.260538
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.356 mas, bmaj=3.882 mas, bpa=13.61 degrees
! Estimated noise=0.41087 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000179926 Jy
! Component: 100  -  total flux cleaned = 0.000193265 Jy
! Component: 150  -  total flux cleaned = 0.000227146 Jy
! Component: 200  -  total flux cleaned = 0.00024763 Jy
! Total flux subtracted in 200 components = 0.00024763 Jy
! Clean residual min=-0.002369 max=0.002208 Jy/beam
! Clean residual mean=-0.000003 rms=0.000566 Jy/beam
! Combined flux in latest and established models = 0.0795975 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 38 components and 0.0795974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087641Jy  sigma=1.260476
! Fit after  self-cal, rms=0.087633Jy  sigma=1.260379
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.14759e-06 Jy
! Component: 100  -  total flux cleaned = -7.66744e-06 Jy
! Component: 150  -  total flux cleaned = 1.15633e-05 Jy
! Component: 200  -  total flux cleaned = 2.91795e-05 Jy
! Total flux subtracted in 200 components = 2.91795e-05 Jy
! Clean residual min=-0.002370 max=0.002161 Jy/beam
! Clean residual mean=-0.000003 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.0796266 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 39 components and 0.0796266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087629Jy  sigma=1.260343
! Fit after  self-cal, rms=0.087630Jy  sigma=1.260325
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087630Jy  sigma=1.260325
! Fit after  self-cal, rms=0.087499Jy  sigma=1.260318
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.766 mas, bmaj=4.7 mas, bpa=15.44 degrees
! Estimated noise=0.57761 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.78004e-05 Jy
! Component: 100  -  total flux cleaned = -0.000131998 Jy
! Component: 150  -  total flux cleaned = -0.000193918 Jy
! Component: 200  -  total flux cleaned = -0.000236552 Jy
! Total flux subtracted in 200 components = -0.000236552 Jy
! Clean residual min=-0.002323 max=0.002887 Jy/beam
! Clean residual mean=-0.000007 rms=0.000742 Jy/beam
! Combined flux in latest and established models = 0.0793901 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 42 components and 0.0793901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087500Jy  sigma=1.260334
! Fit after  self-cal, rms=0.087509Jy  sigma=1.260268
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.89819e-05 Jy
! Component: 100  -  total flux cleaned = -5.28854e-05 Jy
! Component: 150  -  total flux cleaned = -9.33806e-05 Jy
! Component: 200  -  total flux cleaned = -0.000112298 Jy
! Total flux subtracted in 200 components = -0.000112298 Jy
! Clean residual min=-0.002315 max=0.002867 Jy/beam
! Clean residual mean=-0.000007 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.0792778 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 44 components and 0.0792778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087512Jy  sigma=1.260304
! Fit after  self-cal, rms=0.087515Jy  sigma=1.260267
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.354 mas, bmaj=3.881 mas, bpa=13.6 degrees
! Estimated noise=0.410204 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.354 x 3.881 at 13.6 degrees (North through East)
! Clean map  min=-0.002176  max=0.071185 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.091 mas, bmaj=3.694 mas, bpa=13.84 degrees
! Estimated noise=0.820852 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0541311 Jy
! Component: 100  -  total flux cleaned = 0.0672751 Jy
! Component: 150  -  total flux cleaned = 0.0732081 Jy
! Component: 200  -  total flux cleaned = 0.0757773 Jy
! Total flux subtracted in 200 components = 0.0757773 Jy
! Clean residual min=-0.004398 max=0.004606 Jy/beam
! Clean residual mean=-0.000000 rms=0.001017 Jy/beam
! Combined flux in latest and established models = 0.0757773 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0757773 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.354 mas, bmaj=3.881 mas, bpa=13.6 degrees
! Estimated noise=0.410204 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00264497 Jy
! Component: 100  -  total flux cleaned = 0.00293181 Jy
! Component: 150  -  total flux cleaned = 0.00314372 Jy
! Component: 200  -  total flux cleaned = 0.00332045 Jy
! Total flux subtracted in 200 components = 0.00332045 Jy
! Clean residual min=-0.002512 max=0.002190 Jy/beam
! Clean residual mean=-0.000003 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.0790977 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 18 components and 0.0790977 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.766 mas, bmaj=4.7 mas, bpa=15.44 degrees
! Estimated noise=0.57761 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000251134 Jy
! Component: 100  -  total flux cleaned = 0.000221837 Jy
! Component: 150  -  total flux cleaned = 0.000198081 Jy
! Component: 200  -  total flux cleaned = 0.000186639 Jy
! Total flux subtracted in 200 components = 0.000186639 Jy
! Clean residual min=-0.002312 max=0.002843 Jy/beam
! Clean residual mean=-0.000007 rms=0.000739 Jy/beam
! Combined flux in latest and established models = 0.0792843 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.14381e-05 Jy
! Component: 100  -  total flux cleaned = -2.19649e-05 Jy
! Component: 150  -  total flux cleaned = -3.21265e-05 Jy
! Component: 200  -  total flux cleaned = -4.19348e-05 Jy
! Total flux subtracted in 200 components = -4.19348e-05 Jy
! Clean residual min=-0.002316 max=0.002844 Jy/beam
! Clean residual mean=-0.000007 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.0792424 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 25 components and 0.0792424 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.354 mas, bmaj=3.881 mas, bpa=13.6 degrees
! Estimated noise=0.410204 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173239 Jy
! Component: 100  -  total flux cleaned = 0.000176338 Jy
! Component: 150  -  total flux cleaned = 0.000222171 Jy
! Component: 200  -  total flux cleaned = 0.00026376 Jy
! Total flux subtracted in 200 components = 0.00026376 Jy
! Clean residual min=-0.002384 max=0.002105 Jy/beam
! Clean residual mean=-0.000003 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.0795062 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 41 components and 0.0795062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087512Jy  sigma=1.260372
! Fit after  self-cal, rms=0.087502Jy  sigma=1.260276
wmodel J0657+3119_C_map.mod
! Writing 41 model components to file: J0657+3119_C_map.mod
wobs   J0657+3119_C_uvs.fits
! Writing UV FITS file: J0657+3119_C_uvs.fits
wwins  J0657+3119_C_map.win
! wwins: Wrote 1 windows to J0657+3119_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000565111 Jy
! Component: 100  -  total flux cleaned = -0.00068076 Jy
! Component: 150  -  total flux cleaned = -0.000788356 Jy
! Component: 200  -  total flux cleaned = -0.000925627 Jy
! Component: 250  -  total flux cleaned = -0.000959162 Jy
! Component: 300  -  total flux cleaned = -0.000926101 Jy
! Component: 350  -  total flux cleaned = -0.000832181 Jy
! Component: 400  -  total flux cleaned = -0.000832445 Jy
! Component: 450  -  total flux cleaned = -0.000892759 Jy
! Component: 500  -  total flux cleaned = -0.000921415 Jy
! Component: 550  -  total flux cleaned = -0.000864558 Jy
! Component: 600  -  total flux cleaned = -0.000837404 Jy
! Component: 650  -  total flux cleaned = -0.000810399 Jy
! Component: 700  -  total flux cleaned = -0.000757672 Jy
! Component: 750  -  total flux cleaned = -0.000732254 Jy
! Component: 800  -  total flux cleaned = -0.000681378 Jy
! Component: 850  -  total flux cleaned = -0.000731672 Jy
! Component: 900  -  total flux cleaned = -0.000706561 Jy
! Component: 950  -  total flux cleaned = -0.00073074 Jy
! Component: 1000  -  total flux cleaned = -0.000706301 Jy
! Component: 1050  -  total flux cleaned = -0.000683146 Jy
! Component: 1100  -  total flux cleaned = -0.000774423 Jy
! Component: 1150  -  total flux cleaned = -0.000796593 Jy
! Component: 1200  -  total flux cleaned = -0.000863347 Jy
! Component: 1250  -  total flux cleaned = -0.000885079 Jy
! Component: 1300  -  total flux cleaned = -0.000970948 Jy
! Component: 1350  -  total flux cleaned = -0.00103447 Jy
! Component: 1400  -  total flux cleaned = -0.00118074 Jy
! Component: 1450  -  total flux cleaned = -0.00113982 Jy
! Component: 1500  -  total flux cleaned = -0.00128266 Jy
! Component: 1550  -  total flux cleaned = -0.00132283 Jy
! Component: 1600  -  total flux cleaned = -0.00142162 Jy
! Component: 1650  -  total flux cleaned = -0.00146055 Jy
! Component: 1700  -  total flux cleaned = -0.00138289 Jy
! Component: 1750  -  total flux cleaned = -0.00145964 Jy
! Component: 1800  -  total flux cleaned = -0.00151607 Jy
! Component: 1850  -  total flux cleaned = -0.0015907 Jy
! Component: 1900  -  total flux cleaned = -0.00153551 Jy
! Component: 1950  -  total flux cleaned = -0.00157232 Jy
! Component: 2000  -  total flux cleaned = -0.00164482 Jy
! Component: 2050  -  total flux cleaned = -0.00159113 Jy
! Component: 2100  -  total flux cleaned = -0.00164448 Jy
! Component: 2150  -  total flux cleaned = -0.00162707 Jy
! Component: 2200  -  total flux cleaned = -0.00166182 Jy
! Component: 2250  -  total flux cleaned = -0.00166197 Jy
! Component: 2300  -  total flux cleaned = -0.00167889 Jy
! Component: 2350  -  total flux cleaned = -0.00162818 Jy
! Component: 2400  -  total flux cleaned = -0.00162848 Jy
! Component: 2450  -  total flux cleaned = -0.00161191 Jy
! Component: 2500  -  total flux cleaned = -0.00162826 Jy
! Component: 2550  -  total flux cleaned = -0.00159531 Jy
! Component: 2600  -  total flux cleaned = -0.00159532 Jy
! Component: 2650  -  total flux cleaned = -0.00157911 Jy
! Component: 2700  -  total flux cleaned = -0.00157904 Jy
! Component: 2750  -  total flux cleaned = -0.00150007 Jy
! Component: 2800  -  total flux cleaned = -0.00148443 Jy
! Component: 2850  -  total flux cleaned = -0.00148435 Jy
! Component: 2900  -  total flux cleaned = -0.00140712 Jy
! Component: 2950  -  total flux cleaned = -0.00145273 Jy
! Component: 3000  -  total flux cleaned = -0.0013921 Jy
! Component: 3050  -  total flux cleaned = -0.00137689 Jy
! Component: 3100  -  total flux cleaned = -0.00133216 Jy
! Component: 3150  -  total flux cleaned = -0.00137664 Jy
! Component: 3200  -  total flux cleaned = -0.00137649 Jy
! Component: 3250  -  total flux cleaned = -0.00128886 Jy
! Component: 3300  -  total flux cleaned = -0.00128894 Jy
! Component: 3350  -  total flux cleaned = -0.00130322 Jy
! Component: 3400  -  total flux cleaned = -0.00127459 Jy
! Component: 3450  -  total flux cleaned = -0.00123202 Jy
! Component: 3500  -  total flux cleaned = -0.00118982 Jy
! Component: 3550  -  total flux cleaned = -0.00118972 Jy
! Component: 3600  -  total flux cleaned = -0.00109238 Jy
! Component: 3650  -  total flux cleaned = -0.00109233 Jy
! Component: 3700  -  total flux cleaned = -0.00105112 Jy
! Component: 3750  -  total flux cleaned = -0.00103759 Jy
! Component: 3800  -  total flux cleaned = -0.00102386 Jy
! Component: 3850  -  total flux cleaned = -0.000996909 Jy
! Component: 3900  -  total flux cleaned = -0.000983538 Jy
! Component: 3950  -  total flux cleaned = -0.000956737 Jy
! Component: 4000  -  total flux cleaned = -0.000943572 Jy
! Component: 4050  -  total flux cleaned = -0.000956787 Jy
! Total flux subtracted in 4096 components = -0.000930511 Jy
! Clean residual min=-0.000757 max=0.000723 Jy/beam
! Clean residual mean=-0.000001 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0785756 Jy
keep
! Adding 285 model components to the UV plane model.
! The established model now contains 326 components and 0.0785756 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bu007_uvs/J0657+3119_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.354 x 3.881 at 13.6 degrees (North through East)
! Clean map  min=-0.0014652  max=0.070911 Jy/beam
! Writing clean map to FITS file: /scr/pima/bu007_uvs/J0657+3119_C_map.fits
wmodel /scr/pima/bu007_uvs/J0657+3119_C_map.mod
! Writing 326 model components to file: /scr/pima/bu007_uvs/J0657+3119_C_map.mod
wobs   /scr/pima/bu007_uvs/J0657+3119_C_uvs.fits
! Writing UV FITS file: /scr/pima/bu007_uvs/J0657+3119_C_uvs.fits
wwins  /scr/pima/bu007_uvs/J0657+3119_C_map.win
! wwins: Wrote 2 windows to /scr/pima/bu007_uvs/J0657+3119_C_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0709109 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000228459 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.966532 0.966532 1.93306 3.86613 7.73226 15.4645 30.929 61.8581
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.07 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  310.387 
quit
! Quitting program
! Log file /scr/pima/bu007_uvs/J0657+3119_C_dfm.log closed on Sun Jun 24 02:16:52 2018