! Started logfile: .//J2042+4213_C_20180525_dfm.log on Mon Jun 11 08:55:43 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J2042+4213_C_20180525_uva.fits
! Reading UV FITS file: .//J2042+4213_C_20180525_uva.fits
! AN table 1: 95 integrations on 1 of 1 possible baselines.
! AN table 2: 95 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.982775 visibilities/baseline/integration-bin.
! Found source: J2042+4213
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 8216 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J2042+4213_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 190 telescope corrections were flagged in sub-array 1.
!  A total of 10 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 190 telescope corrections were flagged in sub-array 1.
!  A total of 10 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 190 telescope corrections were flagged in sub-array 1.
!  A total of 10 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 190 telescope corrections were flagged in sub-array 1.
!  A total of 10 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 190 telescope corrections were flagged in sub-array 1.
!  A total of 10 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 190 telescope corrections were flagged in sub-array 1.
!  A total of 10 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 190 telescope corrections were flagged in sub-array 1.
!  A total of 10 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 190 telescope corrections were flagged in sub-array 1.
!  A total of 10 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=0.998863Jy  sigma=27.814214
! Fit after  self-cal, rms=0.983109Jy  sigma=27.808226
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.977 mas, bmaj=17.6 mas, bpa=54.54 degrees
! Estimated noise=0.973377 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125931 Jy
! Component: 100  -  total flux cleaned = 0.0158387 Jy
! Total flux subtracted in 100 components = 0.0158387 Jy
! Clean residual min=-0.001651 max=0.001686 Jy/beam
! Clean residual mean=-0.000010 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.0158387 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0158387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025534Jy  sigma=0.684186
! Fit after  self-cal, rms=0.024162Jy  sigma=0.645053
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.847 mas, bmaj=14.18 mas, bpa=54.84 degrees
! Estimated noise=0.294725 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.003773 Jy
! Component: 100  -  total flux cleaned = 0.0053842 Jy
! Component: 150  -  total flux cleaned = 0.00616192 Jy
! Component: 200  -  total flux cleaned = 0.00645092 Jy
! Total flux subtracted in 200 components = 0.00645092 Jy
! Clean residual min=-0.000583 max=0.000588 Jy/beam
! Clean residual mean=0.000003 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.0222896 Jy
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 99 components and 0.0222896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023535Jy  sigma=0.628314
! Fit after  self-cal, rms=0.023456Jy  sigma=0.627187
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.847 x 14.18 at 54.84 degrees (North through East)
! Clean map  min=-0.0010506  max=0.016167 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        0.79     KP        0.99     LA        1.11     
!   PT        1.15     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.10     FD        0.85     KP        1.05     LA        1.10     
!   PT        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.93     KP        1.04     LA        1.07     
!   PT        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.21     FD        1.01     KP        1.12     LA        0.56     
!   PT        0.92     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        1.02     KP        1.11     LA        1.10     
!   PT        0.92     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.09     FD        0.87     KP        1.05     LA        0.99     
!   PT        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.18     FD        0.97     KP        0.92     LA        1.02     
!   PT        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        0.94     KP        1.01     LA        1.06     
!   PT        0.97     
! 
! 
! Fit before self-cal, rms=0.023456Jy  sigma=0.627187
! Fit after  self-cal, rms=0.022757Jy  sigma=0.616293
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.925 mas, bmaj=14.3 mas, bpa=54.53 degrees
! Estimated noise=0.289034 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000324921 Jy
! Component: 100  -  total flux cleaned = 0.000279592 Jy
! Component: 150  -  total flux cleaned = 0.000279064 Jy
! Component: 200  -  total flux cleaned = 0.00028996 Jy
! Total flux subtracted in 200 components = 0.00028996 Jy
! Clean residual min=-0.000183 max=0.000184 Jy/beam
! Clean residual mean=0.000000 rms=0.000069 Jy/beam
! Combined flux in latest and established models = 0.0225796 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 156 components and 0.0225796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022739Jy  sigma=0.615728
! Fit after  self-cal, rms=0.022920Jy  sigma=0.612392
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022920Jy  sigma=0.612392
! Fit after  self-cal, rms=0.023734Jy  sigma=0.611290
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.938 mas, bmaj=14.28 mas, bpa=54.45 degrees
! Estimated noise=0.290276 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000159311 Jy
! Component: 100  -  total flux cleaned = 0.000159134 Jy
! Component: 150  -  total flux cleaned = 0.000137499 Jy
! Component: 200  -  total flux cleaned = 0.000137624 Jy
! Total flux subtracted in 200 components = 0.000137624 Jy
! Clean residual min=-0.000162 max=0.000163 Jy/beam
! Clean residual mean=-0.000000 rms=0.000059 Jy/beam
! Combined flux in latest and established models = 0.0227172 Jy
selfcal
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 205 components and 0.0227172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023721Jy  sigma=0.610967
! Fit after  self-cal, rms=0.023863Jy  sigma=0.610261
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.78329e-05 Jy
! Component: 100  -  total flux cleaned = 7.50516e-05 Jy
! Component: 150  -  total flux cleaned = 8.48472e-05 Jy
! Component: 200  -  total flux cleaned = 9.40618e-05 Jy
! Total flux subtracted in 200 components = 9.40618e-05 Jy
! Clean residual min=-0.000153 max=0.000154 Jy/beam
! Clean residual mean=-0.000000 rms=0.000057 Jy/beam
! Combined flux in latest and established models = 0.0228113 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 262 components and 0.0228113 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023852Jy  sigma=0.609972
! Fit after  self-cal, rms=0.023857Jy  sigma=0.609882
! Inverting map 
! Added new window around map position (21, -37.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.60112e-05 Jy
! Component: 100  -  total flux cleaned = 0.000102821 Jy
! Component: 150  -  total flux cleaned = 6.90733e-05 Jy
! Component: 200  -  total flux cleaned = 1.40132e-05 Jy
! Total flux subtracted in 200 components = 1.40132e-05 Jy
! Clean residual min=-0.000217 max=0.000213 Jy/beam
! Clean residual mean=-0.000000 rms=0.000060 Jy/beam
! Combined flux in latest and established models = 0.0228253 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 295 components and 0.0228253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023853Jy  sigma=0.609754
! Fit after  self-cal, rms=0.023853Jy  sigma=0.609498
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023853Jy  sigma=0.609498
! Fit after  self-cal, rms=0.024798Jy  sigma=0.609225
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.946 mas, bmaj=14.25 mas, bpa=54.41 degrees
! Estimated noise=0.292523 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.68146e-05 Jy
! Component: 100  -  total flux cleaned = 1.48555e-05 Jy
! Component: 150  -  total flux cleaned = -2.99974e-06 Jy
! Component: 200  -  total flux cleaned = -6.47612e-06 Jy
! Total flux subtracted in 200 components = -6.47612e-06 Jy
! Clean residual min=-0.000251 max=0.000229 Jy/beam
! Clean residual mean=-0.000000 rms=0.000063 Jy/beam
! Combined flux in latest and established models = 0.0228188 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 330 components and 0.0228188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024795Jy  sigma=0.609153
! Fit after  self-cal, rms=0.024903Jy  sigma=0.608810
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.70053e-05 Jy
! Component: 100  -  total flux cleaned = 0.000114044 Jy
! Component: 150  -  total flux cleaned = 6.66244e-05 Jy
! Component: 200  -  total flux cleaned = 3.41083e-05 Jy
! Total flux subtracted in 200 components = 3.41083e-05 Jy
! Clean residual min=-0.000249 max=0.000212 Jy/beam
! Clean residual mean=-0.000000 rms=0.000060 Jy/beam
! Combined flux in latest and established models = 0.0228529 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 354 components and 0.0228529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024901Jy  sigma=0.608763
! Fit after  self-cal, rms=0.024906Jy  sigma=0.608742
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024906Jy  sigma=0.608742
! Fit after  self-cal, rms=0.025851Jy  sigma=0.608626
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.742 mas, bmaj=13.66 mas, bpa=54.14 degrees
! Estimated noise=0.30333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.54869e-05 Jy
! Component: 100  -  total flux cleaned = 2.94529e-05 Jy
! Component: 150  -  total flux cleaned = 3.28028e-05 Jy
! Component: 200  -  total flux cleaned = 3.29041e-05 Jy
! Total flux subtracted in 200 components = 3.29041e-05 Jy
! Clean residual min=-0.000219 max=0.000179 Jy/beam
! Clean residual mean=0.000000 rms=0.000054 Jy/beam
! Combined flux in latest and established models = 0.0228858 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 381 components and 0.0228858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025849Jy  sigma=0.608600
! Fit after  self-cal, rms=0.025922Jy  sigma=0.608508
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.43661e-05 Jy
! Component: 100  -  total flux cleaned = 4.77161e-05 Jy
! Component: 150  -  total flux cleaned = 1.63736e-05 Jy
! Component: 200  -  total flux cleaned = -5.58587e-06 Jy
! Total flux subtracted in 200 components = -5.58587e-06 Jy
! Clean residual min=-0.000198 max=0.000170 Jy/beam
! Clean residual mean=0.000000 rms=0.000049 Jy/beam
! Combined flux in latest and established models = 0.0228802 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 402 components and 0.0228802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025921Jy  sigma=0.608491
! Fit after  self-cal, rms=0.025925Jy  sigma=0.608476
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.948 mas, bmaj=14.25 mas, bpa=54.39 degrees
! Estimated noise=0.294448 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.948 x 14.25 at 54.39 degrees (North through East)
! Clean map  min=-0.00044619  max=0.0156 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.044 mas, bmaj=17.61 mas, bpa=53.91 degrees
! Estimated noise=1.00904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00647613 Jy
! Component: 100  -  total flux cleaned = 0.00996862 Jy
! Component: 150  -  total flux cleaned = 0.0110944 Jy
! Component: 200  -  total flux cleaned = 0.0109451 Jy
! Total flux subtracted in 200 components = 0.0109451 Jy
! Clean residual min=-0.005995 max=0.010449 Jy/beam
! Clean residual mean=-0.000002 rms=0.002142 Jy/beam
! Combined flux in latest and established models = 0.0109451 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.0109451 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.948 mas, bmaj=14.25 mas, bpa=54.39 degrees
! Estimated noise=0.294448 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00806384 Jy
! Component: 100  -  total flux cleaned = 0.010351 Jy
! Component: 150  -  total flux cleaned = 0.0109682 Jy
! Component: 200  -  total flux cleaned = 0.0108139 Jy
! Total flux subtracted in 200 components = 0.0108139 Jy
! Clean residual min=-0.002021 max=0.002074 Jy/beam
! Clean residual mean=0.000004 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.021759 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 78 components and 0.021759 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.742 mas, bmaj=13.66 mas, bpa=54.14 degrees
! Estimated noise=0.30333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00058309 Jy
! Component: 100  -  total flux cleaned = -0.000792101 Jy
! Component: 150  -  total flux cleaned = -0.00101698 Jy
! Component: 200  -  total flux cleaned = -0.00125019 Jy
! Total flux subtracted in 200 components = -0.00125019 Jy
! Clean residual min=-0.001710 max=0.001692 Jy/beam
! Clean residual mean=0.000003 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.0205088 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000140224 Jy
! Component: 100  -  total flux cleaned = -0.00017143 Jy
! Component: 150  -  total flux cleaned = -8.4889e-05 Jy
! Component: 200  -  total flux cleaned = -3.05826e-05 Jy
! Total flux subtracted in 200 components = -3.05826e-05 Jy
! Clean residual min=-0.001556 max=0.001518 Jy/beam
! Clean residual mean=0.000002 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.0204782 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 150 components and 0.0204782 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.948 mas, bmaj=14.25 mas, bpa=54.39 degrees
! Estimated noise=0.294448 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000120388 Jy
! Component: 100  -  total flux cleaned = -0.000187715 Jy
! Component: 150  -  total flux cleaned = -0.000146038 Jy
! Component: 200  -  total flux cleaned = -0.000125305 Jy
! Total flux subtracted in 200 components = -0.000125305 Jy
! Clean residual min=-0.001350 max=0.001334 Jy/beam
! Clean residual mean=0.000002 rms=0.000347 Jy/beam
! Combined flux in latest and established models = 0.0203529 Jy
selfcal
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 192 components and 0.0203529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026129Jy  sigma=0.615315
! Fit after  self-cal, rms=0.025995Jy  sigma=0.610749
wmodel J2042+4213_C_map.mod
! Writing 192 model components to file: J2042+4213_C_map.mod
wobs   J2042+4213_C_uvs.fits
! Writing UV FITS file: J2042+4213_C_uvs.fits
wwins  J2042+4213_C_map.win
! wwins: Wrote 2 windows to J2042+4213_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 3.31699e-05 Jy
! Component: 100  -  total flux cleaned = -1.34792e-05 Jy
! Component: 150  -  total flux cleaned = 2.38956e-06 Jy
! Component: 200  -  total flux cleaned = 4.07091e-05 Jy
! Component: 250  -  total flux cleaned = 2.63133e-05 Jy
! Component: 300  -  total flux cleaned = 3.98173e-05 Jy
! Component: 350  -  total flux cleaned = 4.6003e-05 Jy
! Component: 400  -  total flux cleaned = 3.96518e-05 Jy
! Component: 450  -  total flux cleaned = 4.54783e-05 Jy
! Component: 500  -  total flux cleaned = 7.37187e-05 Jy
! Component: 550  -  total flux cleaned = 0.000140077 Jy
! Component: 600  -  total flux cleaned = 0.000199384 Jy
! Component: 650  -  total flux cleaned = 0.000262514 Jy
! Component: 700  -  total flux cleaned = 0.000324117 Jy
! Component: 750  -  total flux cleaned = 0.00036934 Jy
! Component: 800  -  total flux cleaned = 0.000423511 Jy
! Component: 850  -  total flux cleaned = 0.000481284 Jy
! Component: 900  -  total flux cleaned = 0.000523772 Jy
! Component: 950  -  total flux cleaned = 0.000574768 Jy
! Component: 1000  -  total flux cleaned = 0.00062039 Jy
! Component: 1050  -  total flux cleaned = 0.00064738 Jy
! Component: 1100  -  total flux cleaned = 0.000656324 Jy
! Component: 1150  -  total flux cleaned = 0.00067829 Jy
! Component: 1200  -  total flux cleaned = 0.000682608 Jy
! Component: 1250  -  total flux cleaned = 0.000686916 Jy
! Component: 1300  -  total flux cleaned = 0.000686876 Jy
! Component: 1350  -  total flux cleaned = 0.00069109 Jy
! Component: 1400  -  total flux cleaned = 0.000699464 Jy
! Component: 1450  -  total flux cleaned = 0.000691106 Jy
! Component: 1500  -  total flux cleaned = 0.000695253 Jy
! Component: 1550  -  total flux cleaned = 0.000715912 Jy
! Component: 1600  -  total flux cleaned = 0.000711749 Jy
! Component: 1650  -  total flux cleaned = 0.000715834 Jy
! Component: 1700  -  total flux cleaned = 0.000719954 Jy
! Component: 1750  -  total flux cleaned = 0.000724063 Jy
! Component: 1800  -  total flux cleaned = 0.000724046 Jy
! Component: 1850  -  total flux cleaned = 0.000728151 Jy
! Component: 1900  -  total flux cleaned = 0.000736415 Jy
! Component: 1950  -  total flux cleaned = 0.000744695 Jy
! Component: 2000  -  total flux cleaned = 0.000748849 Jy
! Component: 2050  -  total flux cleaned = 0.000761349 Jy
! Component: 2100  -  total flux cleaned = 0.000753001 Jy
! Component: 2150  -  total flux cleaned = 0.000765584 Jy
! Component: 2200  -  total flux cleaned = 0.000774038 Jy
! Component: 2250  -  total flux cleaned = 0.00077821 Jy
! Component: 2300  -  total flux cleaned = 0.000786713 Jy
! Component: 2350  -  total flux cleaned = 0.000790994 Jy
! Component: 2400  -  total flux cleaned = 0.000795301 Jy
! Component: 2450  -  total flux cleaned = 0.000803953 Jy
! Component: 2500  -  total flux cleaned = 0.00080833 Jy
! Component: 2550  -  total flux cleaned = 0.000803977 Jy
! Component: 2600  -  total flux cleaned = 0.000804011 Jy
! Component: 2650  -  total flux cleaned = 0.000795113 Jy
! Component: 2700  -  total flux cleaned = 0.000799543 Jy
! Component: 2750  -  total flux cleaned = 0.00079053 Jy
! Component: 2800  -  total flux cleaned = 0.000795123 Jy
! Component: 2850  -  total flux cleaned = 0.000790505 Jy
! Component: 2900  -  total flux cleaned = 0.000785868 Jy
! Component: 2950  -  total flux cleaned = 0.000790542 Jy
! Component: 3000  -  total flux cleaned = 0.000785806 Jy
! Component: 3050  -  total flux cleaned = 0.000790586 Jy
! Component: 3100  -  total flux cleaned = 0.000780973 Jy
! Component: 3150  -  total flux cleaned = 0.000776114 Jy
! Component: 3200  -  total flux cleaned = 0.000766272 Jy
! Component: 3250  -  total flux cleaned = 0.000741452 Jy
! Component: 3300  -  total flux cleaned = 0.000731396 Jy
! Component: 3350  -  total flux cleaned = 0.000711043 Jy
! Component: 3400  -  total flux cleaned = 0.000705873 Jy
! Component: 3450  -  total flux cleaned = 0.000690275 Jy
! Component: 3500  -  total flux cleaned = 0.000669264 Jy
! Component: 3550  -  total flux cleaned = 0.000653305 Jy
! Component: 3600  -  total flux cleaned = 0.000637219 Jy
! Component: 3650  -  total flux cleaned = 0.000609986 Jy
! Component: 3700  -  total flux cleaned = 0.000598954 Jy
! Component: 3750  -  total flux cleaned = 0.000576674 Jy
! Component: 3800  -  total flux cleaned = 0.000548353 Jy
! Component: 3850  -  total flux cleaned = 0.000531127 Jy
! Component: 3900  -  total flux cleaned = 0.000507947 Jy
! Component: 3950  -  total flux cleaned = 0.00049041 Jy
! Component: 4000  -  total flux cleaned = 0.000460752 Jy
! Component: 4050  -  total flux cleaned = 0.000430773 Jy
! Total flux subtracted in 4096 components = 0.000400348 Jy
! Clean residual min=-0.000323 max=0.000365 Jy/beam
! Clean residual mean=0.000003 rms=0.000114 Jy/beam
! Combined flux in latest and established models = 0.0207532 Jy
keep
! Adding 281 model components to the UV plane model.
! The established model now contains 473 components and 0.0207532 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J2042+4213_C_20180525_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.948 x 14.25 at 54.39 degrees (North through East)
! Clean map  min=-0.0027103  max=0.010647 Jy/beam
! Writing clean map to FITS file: .//J2042+4213_C_20180525_map.fits
wmodel .//J2042+4213_C_20180525_map.mod
! Writing 473 model components to file: .//J2042+4213_C_20180525_map.mod
wobs   .//J2042+4213_C_20180525_uvs.fits
! Writing UV FITS file: .//J2042+4213_C_20180525_uvs.fits
wwins  .//J2042+4213_C_20180525_map.win
! wwins: Wrote 3 windows to .//J2042+4213_C_20180525_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0106468 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000112505 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -3.1701 3.1701 6.34019 12.6804 25.3608 50.7215
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.01 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  94.634 
quit
! Quitting program
! Log file .//J2042+4213_C_20180525_dfm.log closed on Mon Jun 11 08:55:48 2018