! Started logfile: .//J2030+3700_C_20180525_dfm.log on Mon Jun 11 08:55:35 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J2030+3700_C_20180525_uva.fits
! Reading UV FITS file: .//J2030+3700_C_20180525_uva.fits
! AN table 1: 43 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.98062 visibilities/baseline/integration-bin.
! Found source: J2030+3700
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 85 lines of history.
! 
! Reading 2024 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J2030+3700_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009927Jy  sigma=25.626641
! Fit after  self-cal, rms=0.923088Jy  sigma=23.319492
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.62 mas, bmaj=14.34 mas, bpa=2.15 degrees
! Estimated noise=1.01145 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.056158 Jy
! Component: 100  -  total flux cleaned = 0.0699288 Jy
! Total flux subtracted in 100 components = 0.0699288 Jy
! Clean residual min=-0.010921 max=0.010983 Jy/beam
! Clean residual mean=0.000032 rms=0.005784 Jy/beam
! Combined flux in latest and established models = 0.0699288 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 46 components and 0.0699288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046317Jy  sigma=1.084118
! Fit after  self-cal, rms=0.045961Jy  sigma=1.081804
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.78 mas, bmaj=14.03 mas, bpa=-6.448 degrees
! Estimated noise=0.640339 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215765 Jy
! Component: 100  -  total flux cleaned = 0.0040735 Jy
! Component: 150  -  total flux cleaned = 0.00223205 Jy
! Component: 200  -  total flux cleaned = -0.000628735 Jy
! Total flux subtracted in 200 components = -0.000628735 Jy
! Clean residual min=-0.003015 max=0.002987 Jy/beam
! Clean residual mean=0.000008 rms=0.001930 Jy/beam
! Combined flux in latest and established models = 0.0693001 Jy
! Performing phase self-cal
! Adding 117 model components to the UV plane model.
! The established model now contains 162 components and 0.0693001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.038272Jy  sigma=0.822478
! Fit after  self-cal, rms=0.038040Jy  sigma=0.820037
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.78 x 14.03 at -6.448 degrees (North through East)
! Clean map  min=-0.0079024  max=0.053555 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.02     KP        1.03     LA        1.04     PT        0.91     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     KP        1.08     LA        1.07     PT        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.19     KP        1.07     LA        1.08     PT        0.89     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.16     KP        1.09     LA        0.59     PT        0.92     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     KP        1.06     LA        1.00     PT        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     KP        1.06     LA        1.02     PT        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        1.04     LA        0.98     PT        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        1.07     LA        1.01     PT        0.94     
! 
! 
! Fit before self-cal, rms=0.038040Jy  sigma=0.820037
! Fit after  self-cal, rms=0.033451Jy  sigma=0.675894
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.1 mas, bmaj=14.07 mas, bpa=-8.332 degrees
! Estimated noise=0.63215 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000714232 Jy
! Component: 100  -  total flux cleaned = -0.00119965 Jy
! Component: 150  -  total flux cleaned = -0.0013646 Jy
! Component: 200  -  total flux cleaned = -0.00153198 Jy
! Total flux subtracted in 200 components = -0.00153198 Jy
! Clean residual min=-0.000331 max=0.000331 Jy/beam
! Clean residual mean=-0.000002 rms=0.000120 Jy/beam
! Combined flux in latest and established models = 0.0677681 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 223 components and 0.0677681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033408Jy  sigma=0.674872
! Fit after  self-cal, rms=0.033455Jy  sigma=0.673739
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033455Jy  sigma=0.673739
! Fit after  self-cal, rms=0.033474Jy  sigma=0.673654
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.1 mas, bmaj=14.07 mas, bpa=-8.453 degrees
! Estimated noise=0.632251 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000155531 Jy
! Component: 100  -  total flux cleaned = 0.0001837 Jy
! Component: 150  -  total flux cleaned = 0.000183746 Jy
! Component: 200  -  total flux cleaned = 0.000132565 Jy
! Total flux subtracted in 200 components = 0.000132565 Jy
! Clean residual min=-0.000213 max=0.000211 Jy/beam
! Clean residual mean=-0.000000 rms=0.000077 Jy/beam
! Combined flux in latest and established models = 0.0679007 Jy
selfcal
! Performing phase self-cal
! Adding 86 model components to the UV plane model.
! The established model now contains 305 components and 0.0679007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033462Jy  sigma=0.673347
! Fit after  self-cal, rms=0.033463Jy  sigma=0.673330
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.66689e-05 Jy
! Component: 100  -  total flux cleaned = 0.000155677 Jy
! Component: 150  -  total flux cleaned = 0.000217632 Jy
! Component: 200  -  total flux cleaned = 0.000321199 Jy
! Total flux subtracted in 200 components = 0.000321199 Jy
! Clean residual min=-0.000220 max=0.000220 Jy/beam
! Clean residual mean=-0.000001 rms=0.000073 Jy/beam
! Combined flux in latest and established models = 0.0682219 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 356 components and 0.0682219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033454Jy  sigma=0.673091
! Fit after  self-cal, rms=0.033455Jy  sigma=0.673084
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033455Jy  sigma=0.673084
! Fit after  self-cal, rms=0.033454Jy  sigma=0.670088
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.1 mas, bmaj=14.08 mas, bpa=-8.75 degrees
! Estimated noise=0.633182 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.10279e-05 Jy
! Component: 100  -  total flux cleaned = -5.65701e-05 Jy
! Component: 150  -  total flux cleaned = -0.000139163 Jy
! Component: 200  -  total flux cleaned = -0.000159431 Jy
! Total flux subtracted in 200 components = -0.000159431 Jy
! Clean residual min=-0.000170 max=0.000169 Jy/beam
! Clean residual mean=-0.000000 rms=0.000061 Jy/beam
! Combined flux in latest and established models = 0.0680624 Jy
selfcal
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 418 components and 0.0680625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033445Jy  sigma=0.669910
! Fit after  self-cal, rms=0.033451Jy  sigma=0.669898
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000128095 Jy
! Component: 100  -  total flux cleaned = 0.00018714 Jy
! Component: 150  -  total flux cleaned = 0.000246862 Jy
! Component: 200  -  total flux cleaned = 0.000320045 Jy
! Total flux subtracted in 200 components = 0.000320045 Jy
! Clean residual min=-0.000178 max=0.000179 Jy/beam
! Clean residual mean=-0.000000 rms=0.000056 Jy/beam
! Combined flux in latest and established models = 0.0683825 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 448 components and 0.0683825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033445Jy  sigma=0.669748
! Fit after  self-cal, rms=0.033445Jy  sigma=0.669742
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033445Jy  sigma=0.669742
! Fit after  self-cal, rms=0.033445Jy  sigma=0.668197
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.21 mas, bmaj=14.13 mas, bpa=-9.635 degrees
! Estimated noise=0.63221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.42808e-05 Jy
! Component: 100  -  total flux cleaned = 0.000137057 Jy
! Component: 150  -  total flux cleaned = 0.000119972 Jy
! Component: 200  -  total flux cleaned = 0.000128063 Jy
! Total flux subtracted in 200 components = 0.000128063 Jy
! Clean residual min=-0.000143 max=0.000144 Jy/beam
! Clean residual mean=-0.000000 rms=0.000050 Jy/beam
! Combined flux in latest and established models = 0.0685106 Jy
selfcal
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 508 components and 0.0685106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033439Jy  sigma=0.668106
! Fit after  self-cal, rms=0.033441Jy  sigma=0.668097
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122819 Jy
! Component: 100  -  total flux cleaned = 0.000178765 Jy
! Component: 150  -  total flux cleaned = 0.000201719 Jy
! Component: 200  -  total flux cleaned = 0.00024169 Jy
! Total flux subtracted in 200 components = 0.00024169 Jy
! Clean residual min=-0.000138 max=0.000134 Jy/beam
! Clean residual mean=-0.000000 rms=0.000047 Jy/beam
! Combined flux in latest and established models = 0.0687523 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 552 components and 0.0687522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033437Jy  sigma=0.668003
! Fit after  self-cal, rms=0.033436Jy  sigma=0.667997
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=12.1 mas, bmaj=14.08 mas, bpa=-8.912 degrees
! Estimated noise=0.633297 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.1 x 14.08 at -8.912 degrees (North through East)
! Clean map  min=-0.0045217  max=0.051149 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.9 mas, bmaj=14.33 mas, bpa=2.686 degrees
! Estimated noise=1.01149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0554974 Jy
! Component: 100  -  total flux cleaned = 0.069156 Jy
! Component: 150  -  total flux cleaned = 0.0735467 Jy
! Component: 200  -  total flux cleaned = 0.076595 Jy
! Total flux subtracted in 200 components = 0.076595 Jy
! Clean residual min=-0.004712 max=0.004743 Jy/beam
! Clean residual mean=0.000011 rms=0.002413 Jy/beam
! Combined flux in latest and established models = 0.0765949 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 97 model components to the UV plane model.
! The established model now contains 97 components and 0.0765949 Jy
! Inverting map and beam 
! Estimated beam: bmin=12.1 mas, bmaj=14.08 mas, bpa=-8.912 degrees
! Estimated noise=0.633297 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000121809 Jy
! Component: 100  -  total flux cleaned = -0.00151227 Jy
! Component: 150  -  total flux cleaned = -0.00291565 Jy
! Component: 200  -  total flux cleaned = -0.00418039 Jy
! Total flux subtracted in 200 components = -0.00418039 Jy
! Clean residual min=-0.001311 max=0.001331 Jy/beam
! Clean residual mean=-0.000002 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.0724145 Jy
! Adding 90 model components to the UV plane model.
! The established model now contains 187 components and 0.0724145 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.21 mas, bmaj=14.13 mas, bpa=-9.635 degrees
! Estimated noise=0.63221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000131963 Jy
! Component: 100  -  total flux cleaned = 3.64806e-06 Jy
! Component: 150  -  total flux cleaned = 0.000213643 Jy
! Component: 200  -  total flux cleaned = 0.00011541 Jy
! Total flux subtracted in 200 components = 0.00011541 Jy
! Clean residual min=-0.000401 max=0.000396 Jy/beam
! Clean residual mean=-0.000001 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.0725299 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.54663e-07 Jy
! Component: 100  -  total flux cleaned = 2.16693e-05 Jy
! Component: 150  -  total flux cleaned = 0.000108733 Jy
! Component: 200  -  total flux cleaned = 0.000200403 Jy
! Total flux subtracted in 200 components = 0.000200403 Jy
! Clean residual min=-0.000383 max=0.000384 Jy/beam
! Clean residual mean=-0.000003 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.0727304 Jy
! Adding 156 model components to the UV plane model.
! The established model now contains 337 components and 0.0727303 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=12.1 mas, bmaj=14.08 mas, bpa=-8.912 degrees
! Estimated noise=0.633297 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000117617 Jy
! Component: 100  -  total flux cleaned = -0.000242868 Jy
! Component: 150  -  total flux cleaned = -0.000300445 Jy
! Component: 200  -  total flux cleaned = -0.000328525 Jy
! Total flux subtracted in 200 components = -0.000328525 Jy
! Clean residual min=-0.000233 max=0.000235 Jy/beam
! Clean residual mean=0.000001 rms=0.000073 Jy/beam
! Combined flux in latest and established models = 0.0724018 Jy
selfcal
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 402 components and 0.0724018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033474Jy  sigma=0.669138
! Fit after  self-cal, rms=0.033474Jy  sigma=0.669077
wmodel J2030+3700_C_map.mod
! Writing 402 model components to file: J2030+3700_C_map.mod
wobs   J2030+3700_C_uvs.fits
! Writing UV FITS file: J2030+3700_C_uvs.fits
wwins  J2030+3700_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   .//J2030+3700_C_20180525_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.1 x 14.08 at -8.912 degrees (North through East)
! Clean map  min=-0.0043222  max=0.043969 Jy/beam
! Writing clean map to FITS file: .//J2030+3700_C_20180525_map.fits
wmodel .//J2030+3700_C_20180525_map.mod
! Writing 402 model components to file: .//J2030+3700_C_20180525_map.mod
wobs   .//J2030+3700_C_20180525_uvs.fits
! Writing UV FITS file: .//J2030+3700_C_20180525_uvs.fits
wwins  .//J2030+3700_C_20180525_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0439686 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 7.47642e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.51012 0.51012 1.02024 2.04048 4.08096 8.16191 16.3238 32.6477 65.2953
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.043 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  588.097 
quit
! Quitting program
! Log file .//J2030+3700_C_20180525_dfm.log closed on Mon Jun 11 08:55:38 2018