! Started logfile: .//J2026+3450_C_20180530_dfm.log on Sun Jul  8 13:48:23 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     .//J2026+3450_C_20180530_uva.fits
! Reading UV FITS file: .//J2026+3450_C_20180530_uva.fits
! AN table 1: 94 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.991135 visibilities/baseline/integration-bin.
! Found source: J2026+3450
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 4472 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J2026+3450_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.999489Jy  sigma=28.689197
! Fit after  self-cal, rms=0.983088Jy  sigma=28.269050
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.2 mas, bmaj=13.45 mas, bpa=13.88 degrees
! Estimated noise=0.395545 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132107 Jy
! Component: 100  -  total flux cleaned = 0.0160739 Jy
! Total flux subtracted in 100 components = 0.0160739 Jy
! Clean residual min=-0.001226 max=0.001216 Jy/beam
! Clean residual mean=-0.000000 rms=0.000483 Jy/beam
! Combined flux in latest and established models = 0.0160739 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0160739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021746Jy  sigma=0.594164
! Fit after  self-cal, rms=0.020353Jy  sigma=0.555021
! Inverting map 
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157715 Jy
! Component: 100  -  total flux cleaned = 0.00210619 Jy
! Total flux subtracted in 100 components = 0.00210619 Jy
! Clean residual min=-0.000865 max=0.000926 Jy/beam
! Clean residual mean=-0.000001 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.01818 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 40 components and 0.01818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020046Jy  sigma=0.547802
! Fit after  self-cal, rms=0.019994Jy  sigma=0.547421
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.65 mas, bmaj=13.96 mas, bpa=9.469 degrees
! Estimated noise=0.37294 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000192136 Jy
! Component: 100  -  total flux cleaned = 0.000522423 Jy
! Component: 150  -  total flux cleaned = 0.000701898 Jy
! Component: 200  -  total flux cleaned = 0.000844757 Jy
! Total flux subtracted in 200 components = 0.000844757 Jy
! Clean residual min=-0.000724 max=0.000712 Jy/beam
! Clean residual mean=-0.000000 rms=0.000206 Jy/beam
! Combined flux in latest and established models = 0.0190248 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 96 components and 0.0190248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019950Jy  sigma=0.546578
! Fit after  self-cal, rms=0.019906Jy  sigma=0.546243
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.65 x 13.96 at 9.469 degrees (North through East)
! Clean map  min=-0.0011954  max=0.017944 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.83     KP        0.97     LA        0.97     PT        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.86     KP        1.10     LA        1.02     PT        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        0.94     LA        0.92     PT        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        1.02     LA        1.03     PT        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.12     KP        0.99     LA        1.07     PT        0.94     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        1.06     LA        1.07     PT        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.99     KP        0.95     LA        1.09     PT        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.07     KP        1.05     LA        1.03     PT        1.01     
! 
! 
! Fit before self-cal, rms=0.019906Jy  sigma=0.546243
! Fit after  self-cal, rms=0.019709Jy  sigma=0.543959
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.65 mas, bmaj=14.03 mas, bpa=11.3 degrees
! Estimated noise=0.373107 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000140209 Jy
! Component: 100  -  total flux cleaned = 0.000188801 Jy
! Component: 150  -  total flux cleaned = 0.000243443 Jy
! Component: 200  -  total flux cleaned = 0.000284294 Jy
! Total flux subtracted in 200 components = 0.000284294 Jy
! Clean residual min=-0.000345 max=0.000432 Jy/beam
! Clean residual mean=0.000000 rms=0.000121 Jy/beam
! Combined flux in latest and established models = 0.0193091 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 123 components and 0.0193091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019706Jy  sigma=0.543901
! Fit after  self-cal, rms=0.019744Jy  sigma=0.543299
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019744Jy  sigma=0.543299
! Fit after  self-cal, rms=0.019911Jy  sigma=0.543164
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.64 mas, bmaj=14.04 mas, bpa=11.98 degrees
! Estimated noise=0.374163 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.32586e-05 Jy
! Component: 100  -  total flux cleaned = 0.000172441 Jy
! Component: 150  -  total flux cleaned = 0.000228536 Jy
! Component: 200  -  total flux cleaned = 0.000262894 Jy
! Total flux subtracted in 200 components = 0.000262894 Jy
! Clean residual min=-0.000339 max=0.000419 Jy/beam
! Clean residual mean=0.000000 rms=0.000120 Jy/beam
! Combined flux in latest and established models = 0.019572 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 130 components and 0.019572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019909Jy  sigma=0.543121
! Fit after  self-cal, rms=0.019934Jy  sigma=0.543030
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.58563e-05 Jy
! Component: 100  -  total flux cleaned = 6.4426e-05 Jy
! Component: 150  -  total flux cleaned = 7.77763e-05 Jy
! Component: 200  -  total flux cleaned = 9.03982e-05 Jy
! Total flux subtracted in 200 components = 9.03982e-05 Jy
! Clean residual min=-0.000356 max=0.000443 Jy/beam
! Clean residual mean=0.000000 rms=0.000122 Jy/beam
! Combined flux in latest and established models = 0.0196624 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 140 components and 0.0196624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019932Jy  sigma=0.543003
! Fit after  self-cal, rms=0.019924Jy  sigma=0.542900
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019924Jy  sigma=0.542900
! Fit after  self-cal, rms=0.020025Jy  sigma=0.542863
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.63 mas, bmaj=14.02 mas, bpa=11.82 degrees
! Estimated noise=0.37455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.52731e-05 Jy
! Component: 100  -  total flux cleaned = 0.000146822 Jy
! Component: 150  -  total flux cleaned = 0.000190856 Jy
! Component: 200  -  total flux cleaned = 0.00022 Jy
! Total flux subtracted in 200 components = 0.00022 Jy
! Clean residual min=-0.000332 max=0.000383 Jy/beam
! Clean residual mean=0.000000 rms=0.000111 Jy/beam
! Combined flux in latest and established models = 0.0198824 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 151 components and 0.0198824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020023Jy  sigma=0.542842
! Fit after  self-cal, rms=0.020034Jy  sigma=0.542745
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.22424e-05 Jy
! Component: 100  -  total flux cleaned = -1.83247e-06 Jy
! Component: 150  -  total flux cleaned = 5.92515e-06 Jy
! Component: 200  -  total flux cleaned = 1.40194e-05 Jy
! Total flux subtracted in 200 components = 1.40194e-05 Jy
! Clean residual min=-0.000350 max=0.000402 Jy/beam
! Clean residual mean=0.000000 rms=0.000112 Jy/beam
! Combined flux in latest and established models = 0.0198964 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 164 components and 0.0198964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020033Jy  sigma=0.542731
! Fit after  self-cal, rms=0.020031Jy  sigma=0.542722
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020031Jy  sigma=0.542722
! Fit after  self-cal, rms=0.020105Jy  sigma=0.542706
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.75 mas, bmaj=14.04 mas, bpa=11.15 degrees
! Estimated noise=0.374824 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.77742e-05 Jy
! Component: 100  -  total flux cleaned = 0.000115307 Jy
! Component: 150  -  total flux cleaned = 0.000168236 Jy
! Component: 200  -  total flux cleaned = 0.000203029 Jy
! Total flux subtracted in 200 components = 0.000203029 Jy
! Clean residual min=-0.000327 max=0.000369 Jy/beam
! Clean residual mean=0.000000 rms=0.000106 Jy/beam
! Combined flux in latest and established models = 0.0200994 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 173 components and 0.0200994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020104Jy  sigma=0.542697
! Fit after  self-cal, rms=0.020113Jy  sigma=0.542686
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.51247e-06 Jy
! Component: 100  -  total flux cleaned = 9.18284e-06 Jy
! Component: 150  -  total flux cleaned = 1.82671e-05 Jy
! Component: 200  -  total flux cleaned = 2.38873e-05 Jy
! Total flux subtracted in 200 components = 2.38873e-05 Jy
! Clean residual min=-0.000343 max=0.000385 Jy/beam
! Clean residual mean=0.000000 rms=0.000108 Jy/beam
! Combined flux in latest and established models = 0.0201233 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 180 components and 0.0201233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020112Jy  sigma=0.542682
! Fit after  self-cal, rms=0.020112Jy  sigma=0.542679
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=11.63 mas, bmaj=14 mas, bpa=11.55 degrees
! Estimated noise=0.37498 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.63 x 14 at 11.55 degrees (North through East)
! Clean map  min=-0.00083855  max=0.018117 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.17 mas, bmaj=13.54 mas, bpa=14.71 degrees
! Estimated noise=0.397547 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014667 Jy
! Component: 100  -  total flux cleaned = 0.0160704 Jy
! Component: 150  -  total flux cleaned = 0.0170074 Jy
! Component: 200  -  total flux cleaned = 0.0178471 Jy
! Total flux subtracted in 200 components = 0.0178471 Jy
! Clean residual min=-0.000887 max=0.000763 Jy/beam
! Clean residual mean=-0.000000 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.0178471 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 45 model components to the UV plane model.
! The established model now contains 45 components and 0.0178471 Jy
! Inverting map and beam 
! Estimated beam: bmin=11.63 mas, bmaj=14 mas, bpa=11.55 degrees
! Estimated noise=0.37498 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000567816 Jy
! Component: 100  -  total flux cleaned = 0.00079156 Jy
! Component: 150  -  total flux cleaned = 0.00100714 Jy
! Component: 200  -  total flux cleaned = 0.00116342 Jy
! Total flux subtracted in 200 components = 0.00116342 Jy
! Clean residual min=-0.000496 max=0.000406 Jy/beam
! Clean residual mean=0.000000 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.0190105 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 87 components and 0.0190105 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.75 mas, bmaj=14.04 mas, bpa=11.15 degrees
! Estimated noise=0.374824 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.10276e-05 Jy
! Component: 100  -  total flux cleaned = 0.000130092 Jy
! Component: 150  -  total flux cleaned = 0.00018373 Jy
! Component: 200  -  total flux cleaned = 0.000217936 Jy
! Total flux subtracted in 200 components = 0.000217936 Jy
! Clean residual min=-0.000457 max=0.000374 Jy/beam
! Clean residual mean=0.000000 rms=0.000128 Jy/beam
! Combined flux in latest and established models = 0.0192284 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.281e-05 Jy
! Component: 100  -  total flux cleaned = 4.44908e-05 Jy
! Component: 150  -  total flux cleaned = 5.52894e-05 Jy
! Component: 200  -  total flux cleaned = 6.77453e-05 Jy
! Total flux subtracted in 200 components = 6.77453e-05 Jy
! Clean residual min=-0.000447 max=0.000373 Jy/beam
! Clean residual mean=0.000000 rms=0.000123 Jy/beam
! Combined flux in latest and established models = 0.0192962 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 117 components and 0.0192962 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=11.63 mas, bmaj=14 mas, bpa=11.55 degrees
! Estimated noise=0.37498 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.67232e-05 Jy
! Component: 100  -  total flux cleaned = 2.98845e-05 Jy
! Component: 150  -  total flux cleaned = 3.59477e-05 Jy
! Component: 200  -  total flux cleaned = 4.35204e-05 Jy
! Total flux subtracted in 200 components = 4.35204e-05 Jy
! Clean residual min=-0.000448 max=0.000380 Jy/beam
! Clean residual mean=0.000000 rms=0.000122 Jy/beam
! Combined flux in latest and established models = 0.0193397 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 123 components and 0.0193397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020115Jy  sigma=0.542838
! Fit after  self-cal, rms=0.020107Jy  sigma=0.542560
wmodel J2026+3450_C_map.mod
! Writing 123 model components to file: J2026+3450_C_map.mod
wobs   J2026+3450_C_uvs.fits
! Writing UV FITS file: J2026+3450_C_uvs.fits
wwins  J2026+3450_C_map.win
! wwins: Wrote 1 windows to J2026+3450_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -8.95342e-05 Jy
! Component: 100  -  total flux cleaned = -0.000102963 Jy
! Component: 150  -  total flux cleaned = -0.000109046 Jy
! Component: 200  -  total flux cleaned = -0.000120493 Jy
! Component: 250  -  total flux cleaned = -0.000131005 Jy
! Component: 300  -  total flux cleaned = -0.000135932 Jy
! Component: 350  -  total flux cleaned = -0.000140601 Jy
! Component: 400  -  total flux cleaned = -0.000145017 Jy
! Component: 450  -  total flux cleaned = -0.000149184 Jy
! Component: 500  -  total flux cleaned = -0.000156968 Jy
! Component: 550  -  total flux cleaned = -0.000160524 Jy
! Component: 600  -  total flux cleaned = -0.000157062 Jy
! Component: 650  -  total flux cleaned = -0.00015039 Jy
! Component: 700  -  total flux cleaned = -0.000143964 Jy
! Component: 750  -  total flux cleaned = -0.000140834 Jy
! Component: 800  -  total flux cleaned = -0.000122683 Jy
! Component: 850  -  total flux cleaned = -0.000104798 Jy
! Component: 900  -  total flux cleaned = -9.29202e-05 Jy
! Component: 950  -  total flux cleaned = -7.51922e-05 Jy
! Component: 1000  -  total flux cleaned = -6.93528e-05 Jy
! Component: 1050  -  total flux cleaned = -6.94085e-05 Jy
! Component: 1100  -  total flux cleaned = -6.94037e-05 Jy
! Component: 1150  -  total flux cleaned = -7.56957e-05 Jy
! Component: 1200  -  total flux cleaned = -7.57127e-05 Jy
! Component: 1250  -  total flux cleaned = -7.89902e-05 Jy
! Component: 1300  -  total flux cleaned = -8.23051e-05 Jy
! Component: 1350  -  total flux cleaned = -9.58565e-05 Jy
! Component: 1400  -  total flux cleaned = -9.58242e-05 Jy
! Component: 1450  -  total flux cleaned = -9.92956e-05 Jy
! Component: 1500  -  total flux cleaned = -9.56423e-05 Jy
! Component: 1550  -  total flux cleaned = -9.56404e-05 Jy
! Component: 1600  -  total flux cleaned = -9.56009e-05 Jy
! Component: 1650  -  total flux cleaned = -9.56541e-05 Jy
! Component: 1700  -  total flux cleaned = -9.15128e-05 Jy
! Component: 1750  -  total flux cleaned = -9.5609e-05 Jy
! Component: 1800  -  total flux cleaned = -9.56123e-05 Jy
! Component: 1850  -  total flux cleaned = -9.55326e-05 Jy
! Component: 1900  -  total flux cleaned = -9.54499e-05 Jy
! Component: 1950  -  total flux cleaned = -9.54276e-05 Jy
! Component: 2000  -  total flux cleaned = -9.53846e-05 Jy
! Component: 2050  -  total flux cleaned = -0.00010025 Jy
! Component: 2100  -  total flux cleaned = -9.52255e-05 Jy
! Component: 2150  -  total flux cleaned = -0.000100257 Jy
! Component: 2200  -  total flux cleaned = -0.000105578 Jy
! Component: 2250  -  total flux cleaned = -0.000100268 Jy
! Component: 2300  -  total flux cleaned = -0.000105651 Jy
! Component: 2350  -  total flux cleaned = -0.000105743 Jy
! Component: 2400  -  total flux cleaned = -0.000105746 Jy
! Component: 2450  -  total flux cleaned = -0.000111585 Jy
! Component: 2500  -  total flux cleaned = -0.000111457 Jy
! Component: 2550  -  total flux cleaned = -0.00011765 Jy
! Component: 2600  -  total flux cleaned = -0.000117543 Jy
! Component: 2650  -  total flux cleaned = -0.000117545 Jy
! Component: 2700  -  total flux cleaned = -0.000117692 Jy
! Component: 2750  -  total flux cleaned = -0.000110701 Jy
! Component: 2800  -  total flux cleaned = -8.88268e-05 Jy
! Component: 2850  -  total flux cleaned = -8.14216e-05 Jy
! Component: 2900  -  total flux cleaned = -6.60791e-05 Jy
! Component: 2950  -  total flux cleaned = -4.23073e-05 Jy
! Component: 3000  -  total flux cleaned = -2.59015e-05 Jy
! Component: 3050  -  total flux cleaned = -2.60287e-05 Jy
! Component: 3100  -  total flux cleaned = -3.48735e-05 Jy
! Component: 3150  -  total flux cleaned = -2.59387e-05 Jy
! Component: 3200  -  total flux cleaned = -2.58624e-05 Jy
! Component: 3250  -  total flux cleaned = -2.56566e-05 Jy
! Component: 3300  -  total flux cleaned = -3.5821e-05 Jy
! Component: 3350  -  total flux cleaned = -3.60705e-05 Jy
! Component: 3400  -  total flux cleaned = -4.68837e-05 Jy
! Component: 3450  -  total flux cleaned = -6.98812e-05 Jy
! Component: 3500  -  total flux cleaned = -8.18386e-05 Jy
! Component: 3550  -  total flux cleaned = -0.000106742 Jy
! Component: 3600  -  total flux cleaned = -0.00010662 Jy
! Component: 3650  -  total flux cleaned = -0.000133567 Jy
! Component: 3700  -  total flux cleaned = -0.000147488 Jy
! Component: 3750  -  total flux cleaned = -0.000162335 Jy
! Component: 3800  -  total flux cleaned = -0.000193369 Jy
! Component: 3850  -  total flux cleaned = -0.000193408 Jy
! Component: 3900  -  total flux cleaned = -0.000209956 Jy
! Component: 3950  -  total flux cleaned = -0.000209882 Jy
! Component: 4000  -  total flux cleaned = -0.000209329 Jy
! Component: 4050  -  total flux cleaned = -0.000209486 Jy
! Total flux subtracted in 4096 components = -0.00020947 Jy
! Clean residual min=-0.001139 max=0.001096 Jy/beam
! Clean residual mean=-0.000000 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.0191302 Jy
keep
! Adding 190 model components to the UV plane model.
! The established model now contains 313 components and 0.0191302 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   .//J2026+3450_C_20180530_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 11.63 x 14 at 11.55 degrees (North through East)
! Clean map  min=-0.0013593  max=0.018913 Jy/beam
! Writing clean map to FITS file: .//J2026+3450_C_20180530_map.fits
wmodel .//J2026+3450_C_20180530_map.mod
! Writing 313 model components to file: .//J2026+3450_C_20180530_map.mod
wobs   .//J2026+3450_C_20180530_uvs.fits
! Writing UV FITS file: .//J2026+3450_C_20180530_uvs.fits
wwins  .//J2026+3450_C_20180530_map.win
! wwins: Wrote 2 windows to .//J2026+3450_C_20180530_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0189126 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000266934 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -4.23422 4.23422 8.46845 16.9369 33.8738 67.7476
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.018 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  70.851 
quit
! Quitting program
! Log file .//J2026+3450_C_20180530_dfm.log closed on Sun Jul  8 13:48:27 2018