! Started logfile: /tmp/maps//J2025-2845_C_20180619_dfm.log on Wed Jul  4 23:43:35 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /tmp/maps//J2025-2845_C_20180619_uva.fits
! Reading UV FITS file: /tmp/maps//J2025-2845_C_20180619_uva.fits
! AN table 1: 92 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.978261 visibilities/baseline/integration-bin.
! Found source: J2025-2845
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 76 lines of history.
! 
! Reading 20160 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J2025-2845_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.038692Jy  sigma=19.730293
! Fit after  self-cal, rms=0.733244Jy  sigma=13.828186
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.361 mas, bmaj=10.83 mas, bpa=-28 degrees
! Estimated noise=1.06169 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.206558 Jy
! Component: 100  -  total flux cleaned = 0.252957 Jy
! Total flux subtracted in 100 components = 0.252957 Jy
! Clean residual min=-0.010004 max=0.016250 Jy/beam
! Clean residual mean=0.000005 rms=0.002628 Jy/beam
! Combined flux in latest and established models = 0.252957 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.252957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.054192Jy  sigma=0.980471
! Fit after  self-cal, rms=0.054193Jy  sigma=0.980329
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0175988 Jy
! Component: 100  -  total flux cleaned = 0.0280073 Jy
! Total flux subtracted in 100 components = 0.0280073 Jy
! Clean residual min=-0.006770 max=0.006605 Jy/beam
! Clean residual mean=0.000002 rms=0.001654 Jy/beam
! Combined flux in latest and established models = 0.280964 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 24 components and 0.280964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047530Jy  sigma=0.820134
! Fit after  self-cal, rms=0.047523Jy  sigma=0.819621
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.057 mas, bmaj=11.08 mas, bpa=-26.84 degrees
! Estimated noise=0.268267 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00953301 Jy
! Component: 100  -  total flux cleaned = 0.0154248 Jy
! Component: 150  -  total flux cleaned = 0.0195463 Jy
! Component: 200  -  total flux cleaned = 0.0226257 Jy
! Total flux subtracted in 200 components = 0.0226257 Jy
! Clean residual min=-0.006118 max=0.006347 Jy/beam
! Clean residual mean=-0.000010 rms=0.001754 Jy/beam
! Combined flux in latest and established models = 0.30359 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 68 components and 0.30359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045656Jy  sigma=0.766655
! Fit after  self-cal, rms=0.045651Jy  sigma=0.766321
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.057 x 11.08 at -26.84 degrees (North through East)
! Clean map  min=-0.0060129  max=0.2554 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.96     KP        0.97     LA        1.06     
!   MK        1.01     NL        1.04     OV        1.02     PT        0.96     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     KP        0.97     LA        1.07     
!   MK        1.02     NL        1.02     OV        1.01     PT        0.96     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.95     KP        0.97     LA        1.07     
!   MK        1.01     NL        1.02     OV        1.02     PT        0.99     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     KP        0.97     LA        1.07     
!   MK        1.02     NL        1.01     OV        1.02     PT        0.98     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     KP        0.96     LA        1.04     
!   MK        1.01     NL        1.01     OV        1.01     PT        0.95     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     KP        0.97     LA        1.04     
!   MK        1.00     NL        1.02     OV        1.01     PT        0.94     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     KP        0.96     LA        1.04     
!   MK        1.00     NL        1.01     OV        1.01     PT        0.94     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.94     KP        0.96     LA        1.04     
!   MK        1.00     NL        1.00     OV        1.01     PT        0.94     
! 
! 
! Fit before self-cal, rms=0.045651Jy  sigma=0.766321
! Fit after  self-cal, rms=0.043496Jy  sigma=0.708840
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.063 mas, bmaj=11.18 mas, bpa=-26.82 degrees
! Estimated noise=0.268198 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0019899 Jy
! Component: 100  -  total flux cleaned = -0.00298291 Jy
! Component: 150  -  total flux cleaned = -0.00308805 Jy
! Component: 200  -  total flux cleaned = -0.00306174 Jy
! Total flux subtracted in 200 components = -0.00306174 Jy
! Clean residual min=-0.002363 max=0.002040 Jy/beam
! Clean residual mean=-0.000002 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.300528 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 83 components and 0.300528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043381Jy  sigma=0.706985
! Fit after  self-cal, rms=0.043393Jy  sigma=0.706826
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043393Jy  sigma=0.706826
! Fit after  self-cal, rms=0.043442Jy  sigma=0.706380
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.065 mas, bmaj=11.2 mas, bpa=-26.82 degrees
! Estimated noise=0.268037 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00120287 Jy
! Component: 100  -  total flux cleaned = -0.00186917 Jy
! Component: 150  -  total flux cleaned = -0.00201919 Jy
! Component: 200  -  total flux cleaned = -0.00210699 Jy
! Total flux subtracted in 200 components = -0.00210699 Jy
! Clean residual min=-0.002040 max=0.001864 Jy/beam
! Clean residual mean=-0.000001 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.298421 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 93 components and 0.298421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043399Jy  sigma=0.705525
! Fit after  self-cal, rms=0.043398Jy  sigma=0.705501
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.83793e-05 Jy
! Component: 100  -  total flux cleaned = -9.69512e-05 Jy
! Component: 150  -  total flux cleaned = -0.000132126 Jy
! Component: 200  -  total flux cleaned = -0.000148964 Jy
! Total flux subtracted in 200 components = -0.000148964 Jy
! Clean residual min=-0.001895 max=0.001812 Jy/beam
! Clean residual mean=-0.000001 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.298272 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 100 components and 0.298272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043385Jy  sigma=0.705195
! Fit after  self-cal, rms=0.043384Jy  sigma=0.705186
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043384Jy  sigma=0.705186
! Fit after  self-cal, rms=0.043412Jy  sigma=0.704850
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.066 mas, bmaj=11.21 mas, bpa=-26.83 degrees
! Estimated noise=0.267854 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000927527 Jy
! Component: 100  -  total flux cleaned = -0.00148275 Jy
! Component: 150  -  total flux cleaned = -0.00166162 Jy
! Component: 200  -  total flux cleaned = -0.00176644 Jy
! Total flux subtracted in 200 components = -0.00176644 Jy
! Clean residual min=-0.001720 max=0.001699 Jy/beam
! Clean residual mean=0.000000 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.296506 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 104 components and 0.296506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043387Jy  sigma=0.704305
! Fit after  self-cal, rms=0.043387Jy  sigma=0.704300
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.72415e-05 Jy
! Component: 100  -  total flux cleaned = -0.000161353 Jy
! Component: 150  -  total flux cleaned = -0.000202331 Jy
! Component: 200  -  total flux cleaned = -0.000215287 Jy
! Total flux subtracted in 200 components = -0.000215287 Jy
! Clean residual min=-0.001651 max=0.001723 Jy/beam
! Clean residual mean=0.000000 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.29629 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 108 components and 0.29629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043381Jy  sigma=0.704116
! Fit after  self-cal, rms=0.043380Jy  sigma=0.704114
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043380Jy  sigma=0.704114
! Fit after  self-cal, rms=0.043408Jy  sigma=0.703866
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.944 mas, bmaj=13.89 mas, bpa=-11.79 degrees
! Estimated noise=0.296489 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000774832 Jy
! Component: 100  -  total flux cleaned = -0.00126019 Jy
! Component: 150  -  total flux cleaned = -0.00147192 Jy
! Component: 200  -  total flux cleaned = -0.00159084 Jy
! Total flux subtracted in 200 components = -0.00159084 Jy
! Clean residual min=-0.001938 max=0.001903 Jy/beam
! Clean residual mean=0.000000 rms=0.000583 Jy/beam
! Combined flux in latest and established models = 0.2947 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 125 components and 0.2947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043395Jy  sigma=0.703625
! Fit after  self-cal, rms=0.043395Jy  sigma=0.703613
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.51046e-05 Jy
! Component: 100  -  total flux cleaned = -0.000137448 Jy
! Component: 150  -  total flux cleaned = -0.000166494 Jy
! Component: 200  -  total flux cleaned = -0.000203033 Jy
! Total flux subtracted in 200 components = -0.000203033 Jy
! Clean residual min=-0.001904 max=0.001878 Jy/beam
! Clean residual mean=0.000000 rms=0.000576 Jy/beam
! Combined flux in latest and established models = 0.294497 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 134 components and 0.294497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043395Jy  sigma=0.703549
! Fit after  self-cal, rms=0.043394Jy  sigma=0.703544
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.066 mas, bmaj=11.23 mas, bpa=-26.84 degrees
! Estimated noise=0.267701 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.066 x 11.23 at -26.84 degrees (North through East)
! Clean map  min=-0.001556  max=0.25423 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.364 mas, bmaj=10.97 mas, bpa=-27.97 degrees
! Estimated noise=1.06818 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.207763 Jy
! Component: 100  -  total flux cleaned = 0.25395 Jy
! Component: 150  -  total flux cleaned = 0.269546 Jy
! Component: 200  -  total flux cleaned = 0.277169 Jy
! Total flux subtracted in 200 components = 0.277169 Jy
! Clean residual min=-0.003206 max=0.003924 Jy/beam
! Clean residual mean=0.000003 rms=0.000904 Jy/beam
! Combined flux in latest and established models = 0.277169 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.277169 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.066 mas, bmaj=11.23 mas, bpa=-26.84 degrees
! Estimated noise=0.267701 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00645577 Jy
! Component: 100  -  total flux cleaned = 0.0100109 Jy
! Component: 150  -  total flux cleaned = 0.0123969 Jy
! Component: 200  -  total flux cleaned = 0.0140611 Jy
! Total flux subtracted in 200 components = 0.0140611 Jy
! Clean residual min=-0.001645 max=0.001615 Jy/beam
! Clean residual mean=0.000000 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.29123 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 72 components and 0.29123 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.944 mas, bmaj=13.89 mas, bpa=-11.79 degrees
! Estimated noise=0.296489 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125555 Jy
! Component: 100  -  total flux cleaned = 0.00191517 Jy
! Component: 150  -  total flux cleaned = 0.00214522 Jy
! Component: 200  -  total flux cleaned = 0.00232759 Jy
! Total flux subtracted in 200 components = 0.00232759 Jy
! Clean residual min=-0.001641 max=0.002043 Jy/beam
! Clean residual mean=-0.000000 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.293557 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000162056 Jy
! Component: 100  -  total flux cleaned = 0.000306853 Jy
! Component: 150  -  total flux cleaned = 0.000435863 Jy
! Component: 200  -  total flux cleaned = 0.000551189 Jy
! Total flux subtracted in 200 components = 0.000551189 Jy
! Clean residual min=-0.001649 max=0.002000 Jy/beam
! Clean residual mean=0.000000 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.294109 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 98 components and 0.294109 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.066 mas, bmaj=11.23 mas, bpa=-26.84 degrees
! Estimated noise=0.267701 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.93358e-05 Jy
! Component: 100  -  total flux cleaned = 0.000195118 Jy
! Component: 150  -  total flux cleaned = 0.000260761 Jy
! Component: 200  -  total flux cleaned = 0.000316484 Jy
! Total flux subtracted in 200 components = 0.000316484 Jy
! Clean residual min=-0.001379 max=0.001686 Jy/beam
! Clean residual mean=0.000001 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.294425 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 111 components and 0.294425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043398Jy  sigma=0.703045
! Fit after  self-cal, rms=0.043390Jy  sigma=0.702993
wmodel J2025-2845_C_map.mod
! Writing 111 model components to file: J2025-2845_C_map.mod
wobs   J2025-2845_C_uvs.fits
! Writing UV FITS file: J2025-2845_C_uvs.fits
wwins  J2025-2845_C_map.win
! wwins: Wrote 1 windows to J2025-2845_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000247305 Jy
! Component: 100  -  total flux cleaned = 0.000222098 Jy
! Component: 150  -  total flux cleaned = 0.000221904 Jy
! Component: 200  -  total flux cleaned = 0.000265701 Jy
! Component: 250  -  total flux cleaned = 0.000306681 Jy
! Component: 300  -  total flux cleaned = 0.000267556 Jy
! Component: 350  -  total flux cleaned = 0.000175565 Jy
! Component: 400  -  total flux cleaned = 0.000123054 Jy
! Component: 450  -  total flux cleaned = 8.91488e-05 Jy
! Component: 500  -  total flux cleaned = 7.23259e-05 Jy
! Component: 550  -  total flux cleaned = -2.25564e-05 Jy
! Component: 600  -  total flux cleaned = -0.000113892 Jy
! Component: 650  -  total flux cleaned = -0.000187406 Jy
! Component: 700  -  total flux cleaned = -0.000258705 Jy
! Component: 750  -  total flux cleaned = -0.000327629 Jy
! Component: 800  -  total flux cleaned = -0.00038136 Jy
! Component: 850  -  total flux cleaned = -0.000458922 Jy
! Component: 900  -  total flux cleaned = -0.000509066 Jy
! Component: 950  -  total flux cleaned = -0.000570028 Jy
! Component: 1000  -  total flux cleaned = -0.000640906 Jy
! Component: 1050  -  total flux cleaned = -0.000721083 Jy
! Component: 1100  -  total flux cleaned = -0.000787729 Jy
! Component: 1150  -  total flux cleaned = -0.000863958 Jy
! Component: 1200  -  total flux cleaned = -0.000917152 Jy
! Component: 1250  -  total flux cleaned = -0.000969099 Jy
! Component: 1300  -  total flux cleaned = -0.00102978 Jy
! Component: 1350  -  total flux cleaned = -0.00107907 Jy
! Component: 1400  -  total flux cleaned = -0.00110811 Jy
! Component: 1450  -  total flux cleaned = -0.00114586 Jy
! Component: 1500  -  total flux cleaned = -0.00119222 Jy
! Component: 1550  -  total flux cleaned = -0.00123762 Jy
! Component: 1600  -  total flux cleaned = -0.00125527 Jy
! Component: 1650  -  total flux cleaned = -0.00128151 Jy
! Component: 1700  -  total flux cleaned = -0.00129843 Jy
! Component: 1750  -  total flux cleaned = -0.00129845 Jy
! Component: 1800  -  total flux cleaned = -0.00130674 Jy
! Component: 1850  -  total flux cleaned = -0.00133091 Jy
! Component: 1900  -  total flux cleaned = -0.00135446 Jy
! Component: 1950  -  total flux cleaned = -0.00136991 Jy
! Component: 2000  -  total flux cleaned = -0.00140047 Jy
! Component: 2050  -  total flux cleaned = -0.00141524 Jy
! Component: 2100  -  total flux cleaned = -0.00143735 Jy
! Component: 2150  -  total flux cleaned = -0.00143738 Jy
! Component: 2200  -  total flux cleaned = -0.00143045 Jy
! Component: 2250  -  total flux cleaned = -0.00144458 Jy
! Component: 2300  -  total flux cleaned = -0.00145857 Jy
! Component: 2350  -  total flux cleaned = -0.00149261 Jy
! Component: 2400  -  total flux cleaned = -0.00150614 Jy
! Component: 2450  -  total flux cleaned = -0.00155941 Jy
! Component: 2500  -  total flux cleaned = -0.00163169 Jy
! Component: 2550  -  total flux cleaned = -0.00167707 Jy
! Component: 2600  -  total flux cleaned = -0.001722 Jy
! Component: 2650  -  total flux cleaned = -0.00177913 Jy
! Component: 2700  -  total flux cleaned = -0.00183561 Jy
! Component: 2750  -  total flux cleaned = -0.00187909 Jy
! Component: 2800  -  total flux cleaned = -0.00194672 Jy
! Component: 2850  -  total flux cleaned = -0.00198922 Jy
! Component: 2900  -  total flux cleaned = -0.00202541 Jy
! Component: 2950  -  total flux cleaned = -0.00208511 Jy
! Component: 3000  -  total flux cleaned = -0.00213829 Jy
! Component: 3050  -  total flux cleaned = -0.00217928 Jy
! Component: 3100  -  total flux cleaned = -0.00220258 Jy
! Component: 3150  -  total flux cleaned = -0.00223723 Jy
! Component: 3200  -  total flux cleaned = -0.00226586 Jy
! Component: 3250  -  total flux cleaned = -0.00230004 Jy
! Component: 3300  -  total flux cleaned = -0.00234516 Jy
! Component: 3350  -  total flux cleaned = -0.00237319 Jy
! Component: 3400  -  total flux cleaned = -0.00237319 Jy
! Component: 3450  -  total flux cleaned = -0.00241741 Jy
! Component: 3500  -  total flux cleaned = -0.00243933 Jy
! Component: 3550  -  total flux cleaned = -0.00246115 Jy
! Component: 3600  -  total flux cleaned = -0.00246114 Jy
! Component: 3650  -  total flux cleaned = -0.00249343 Jy
! Component: 3700  -  total flux cleaned = -0.00249886 Jy
! Component: 3750  -  total flux cleaned = -0.00254145 Jy
! Component: 3800  -  total flux cleaned = -0.00256783 Jy
! Component: 3850  -  total flux cleaned = -0.00257309 Jy
! Component: 3900  -  total flux cleaned = -0.00259396 Jy
! Component: 3950  -  total flux cleaned = -0.0026147 Jy
! Component: 4000  -  total flux cleaned = -0.00265591 Jy
! Component: 4050  -  total flux cleaned = -0.00268157 Jy
! Total flux subtracted in 4096 components = -0.00270706 Jy
! Clean residual min=-0.000275 max=0.000268 Jy/beam
! Clean residual mean=-0.000001 rms=0.000096 Jy/beam
! Combined flux in latest and established models = 0.291718 Jy
keep
! Adding 289 model components to the UV plane model.
! The established model now contains 400 components and 0.291718 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /tmp/maps//J2025-2845_C_20180619_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.066 x 11.23 at -26.84 degrees (North through East)
! Clean map  min=-0.00089459  max=0.25338 Jy/beam
! Writing clean map to FITS file: /tmp/maps//J2025-2845_C_20180619_map.fits
wmodel /tmp/maps//J2025-2845_C_20180619_map.mod
! Writing 400 model components to file: /tmp/maps//J2025-2845_C_20180619_map.mod
wobs   /tmp/maps//J2025-2845_C_20180619_uvs.fits
! Writing UV FITS file: /tmp/maps//J2025-2845_C_20180619_uvs.fits
wwins  /tmp/maps//J2025-2845_C_20180619_map.win
! wwins: Wrote 2 windows to /tmp/maps//J2025-2845_C_20180619_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.25338 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.36679e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.110902 0.110902 0.221804 0.443608 0.887216 1.77443 3.54886 7.09773 14.1955 28.3909 56.7818
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.253 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2705.09 
quit
! Quitting program
! Log file /tmp/maps//J2025-2845_C_20180619_dfm.log closed on Wed Jul  4 23:43:40 2018