! Started logfile: /tmp/maps//J1401-3835_X_20180615_dfm.log on Wed Jul  4 23:28:01 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /tmp/maps//J1401-3835_X_20180615_uva.fits
! Reading UV FITS file: /tmp/maps//J1401-3835_X_20180615_uva.fits
! AN table 1: 16 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.94375 visibilities/baseline/integration-bin.
! Found source: J1401-3835
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 1208 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1401-3835_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001804Jy  sigma=17.886180
! Fit after  self-cal, rms=0.972989Jy  sigma=17.416117
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9123 mas, bmaj=15.64 mas, bpa=-0.6397 degrees
! Estimated noise=1.7386 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0198926 Jy
! Component: 100  -  total flux cleaned = 0.025173 Jy
! Total flux subtracted in 100 components = 0.025173 Jy
! Clean residual min=-0.002874 max=0.002931 Jy/beam
! Clean residual mean=-0.000034 rms=0.001031 Jy/beam
! Combined flux in latest and established models = 0.025173 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.025173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033444Jy  sigma=0.548840
! Fit after  self-cal, rms=0.031757Jy  sigma=0.519784
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.133 mas, bmaj=15.4 mas, bpa=-1.072 degrees
! Estimated noise=1.18423 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00603857 Jy
! Component: 100  -  total flux cleaned = 0.00744387 Jy
! Component: 150  -  total flux cleaned = 0.00759552 Jy
! Component: 200  -  total flux cleaned = 0.00729875 Jy
! Total flux subtracted in 200 components = 0.00729875 Jy
! Clean residual min=-0.000889 max=0.000886 Jy/beam
! Clean residual mean=-0.000026 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.0324717 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 59 components and 0.0324717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030547Jy  sigma=0.498684
! Fit after  self-cal, rms=0.030302Jy  sigma=0.496327
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.133 x 15.4 at -1.072 degrees (North through East)
! Clean map  min=-0.0021676  max=0.024897 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.88     KP        0.94     LA        1.15     PT        0.97     
!   SC        1.20     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.10     KP        0.93     LA        0.96     PT        0.96     
!   SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.93     KP        1.25     LA        0.96     PT        0.85     
!   SC        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.87     KP        1.01     LA        0.97     PT        1.28     
!   SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     KP        0.94     LA        1.01     PT        0.87     
!   SC        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.91     KP        0.79     LA        1.07     PT        1.23     
!   SC        1.15     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     KP        0.89     LA        0.99     PT        1.09     
!   SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.76     KP        1.60     LA        0.77     PT        1.30     
!   SC        1.35     
! 
! 
! Fit before self-cal, rms=0.030302Jy  sigma=0.496327
! Fit after  self-cal, rms=0.032288Jy  sigma=0.488534
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.155 mas, bmaj=15.33 mas, bpa=-1.093 degrees
! Estimated noise=1.17105 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000423432 Jy
! Component: 100  -  total flux cleaned = 0.000383957 Jy
! Component: 150  -  total flux cleaned = 0.00011741 Jy
! Component: 200  -  total flux cleaned = 8.64122e-05 Jy
! Total flux subtracted in 200 components = 8.64122e-05 Jy
! Clean residual min=-0.000458 max=0.000461 Jy/beam
! Clean residual mean=0.000004 rms=0.000179 Jy/beam
! Combined flux in latest and established models = 0.0325581 Jy
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 135 components and 0.0325581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032175Jy  sigma=0.487025
! Fit after  self-cal, rms=0.032523Jy  sigma=0.485713
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032523Jy  sigma=0.485713
! Fit after  self-cal, rms=0.033890Jy  sigma=0.485443
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.155 mas, bmaj=15.3 mas, bpa=-1.094 degrees
! Estimated noise=1.17608 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000612491 Jy
! Component: 100  -  total flux cleaned = 0.000677357 Jy
! Component: 150  -  total flux cleaned = 0.000761017 Jy
! Component: 200  -  total flux cleaned = 0.000863506 Jy
! Total flux subtracted in 200 components = 0.000863506 Jy
! Clean residual min=-0.000407 max=0.000409 Jy/beam
! Clean residual mean=-0.000001 rms=0.000154 Jy/beam
! Combined flux in latest and established models = 0.0334216 Jy
selfcal
! Performing phase self-cal
! Adding 82 model components to the UV plane model.
! The established model now contains 213 components and 0.0334216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033830Jy  sigma=0.484574
! Fit after  self-cal, rms=0.033904Jy  sigma=0.484415
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00020865 Jy
! Component: 100  -  total flux cleaned = -0.000363161 Jy
! Component: 150  -  total flux cleaned = -0.000480803 Jy
! Component: 200  -  total flux cleaned = -0.00050253 Jy
! Total flux subtracted in 200 components = -0.00050253 Jy
! Clean residual min=-0.000349 max=0.000351 Jy/beam
! Clean residual mean=-0.000004 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.0329191 Jy
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 279 components and 0.0329191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033869Jy  sigma=0.483856
! Fit after  self-cal, rms=0.033887Jy  sigma=0.483790
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033887Jy  sigma=0.483790
! Fit after  self-cal, rms=0.034675Jy  sigma=0.483624
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.151 mas, bmaj=15.3 mas, bpa=-1.085 degrees
! Estimated noise=1.17524 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000282181 Jy
! Component: 100  -  total flux cleaned = 0.000280441 Jy
! Component: 150  -  total flux cleaned = 0.00032612 Jy
! Component: 200  -  total flux cleaned = 0.000390676 Jy
! Total flux subtracted in 200 components = 0.000390676 Jy
! Clean residual min=-0.000342 max=0.000343 Jy/beam
! Clean residual mean=-0.000003 rms=0.000135 Jy/beam
! Combined flux in latest and established models = 0.0333098 Jy
selfcal
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 335 components and 0.0333098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034637Jy  sigma=0.483106
! Fit after  self-cal, rms=0.034679Jy  sigma=0.483026
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000116834 Jy
! Component: 100  -  total flux cleaned = -7.50077e-05 Jy
! Component: 150  -  total flux cleaned = -7.60868e-05 Jy
! Component: 200  -  total flux cleaned = -4.01725e-05 Jy
! Total flux subtracted in 200 components = -4.01725e-05 Jy
! Clean residual min=-0.000301 max=0.000300 Jy/beam
! Clean residual mean=-0.000006 rms=0.000127 Jy/beam
! Combined flux in latest and established models = 0.0332696 Jy
! Performing phase self-cal
! Adding 81 model components to the UV plane model.
! The established model now contains 395 components and 0.0332696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034654Jy  sigma=0.482663
! Fit after  self-cal, rms=0.034665Jy  sigma=0.482610
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034665Jy  sigma=0.482610
! Fit after  self-cal, rms=0.035372Jy  sigma=0.482486
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.557 mas, bmaj=13.94 mas, bpa=-3.345 degrees
! Estimated noise=1.48771 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111445 Jy
! Component: 100  -  total flux cleaned = -0.000109841 Jy
! Component: 150  -  total flux cleaned = -0.00020544 Jy
! Component: 200  -  total flux cleaned = -0.000269018 Jy
! Total flux subtracted in 200 components = -0.000269018 Jy
! Clean residual min=-0.000204 max=0.000202 Jy/beam
! Clean residual mean=-0.000001 rms=0.000081 Jy/beam
! Combined flux in latest and established models = 0.0330006 Jy
selfcal
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 450 components and 0.0330006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035346Jy  sigma=0.482344
! Fit after  self-cal, rms=0.035371Jy  sigma=0.482298
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000269406 Jy
! Component: 100  -  total flux cleaned = -0.000514035 Jy
! Component: 150  -  total flux cleaned = -0.000676078 Jy
! Component: 200  -  total flux cleaned = -0.000799131 Jy
! Total flux subtracted in 200 components = -0.000799131 Jy
! Clean residual min=-0.000167 max=0.000168 Jy/beam
! Clean residual mean=-0.000006 rms=0.000063 Jy/beam
! Combined flux in latest and established models = 0.0322014 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 497 components and 0.0322014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035358Jy  sigma=0.482212
! Fit after  self-cal, rms=0.035359Jy  sigma=0.482180
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.146 mas, bmaj=15.3 mas, bpa=-1.074 degrees
! Estimated noise=1.17313 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.146 x 15.3 at -1.074 degrees (North through East)
! Clean map  min=-0.0012026  max=0.024012 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9216 mas, bmaj=15.4 mas, bpa=-0.6714 degrees
! Estimated noise=1.74962 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0205146 Jy
! Component: 100  -  total flux cleaned = 0.0271966 Jy
! Component: 150  -  total flux cleaned = 0.0295328 Jy
! Component: 200  -  total flux cleaned = 0.0306436 Jy
! Total flux subtracted in 200 components = 0.0306436 Jy
! Clean residual min=-0.002081 max=0.002099 Jy/beam
! Clean residual mean=-0.000030 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.0306436 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.0306436 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.146 mas, bmaj=15.3 mas, bpa=-1.074 degrees
! Estimated noise=1.17313 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000674342 Jy
! Component: 100  -  total flux cleaned = -0.000585619 Jy
! Component: 150  -  total flux cleaned = -0.000874747 Jy
! Component: 200  -  total flux cleaned = -0.000814814 Jy
! Total flux subtracted in 200 components = -0.000814814 Jy
! Clean residual min=-0.000955 max=0.000950 Jy/beam
! Clean residual mean=-0.000010 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.0298288 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 115 components and 0.0298288 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.557 mas, bmaj=13.94 mas, bpa=-3.345 degrees
! Estimated noise=1.48771 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000234531 Jy
! Component: 100  -  total flux cleaned = 0.000239514 Jy
! Component: 150  -  total flux cleaned = 7.0461e-05 Jy
! Component: 200  -  total flux cleaned = -4.6815e-05 Jy
! Total flux subtracted in 200 components = -4.6815e-05 Jy
! Clean residual min=-0.000355 max=0.000354 Jy/beam
! Clean residual mean=-0.000005 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0297819 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000220982 Jy
! Component: 100  -  total flux cleaned = -0.000443102 Jy
! Component: 150  -  total flux cleaned = -0.000513554 Jy
! Component: 200  -  total flux cleaned = -0.000580886 Jy
! Total flux subtracted in 200 components = -0.000580886 Jy
! Clean residual min=-0.000276 max=0.000274 Jy/beam
! Clean residual mean=-0.000008 rms=0.000111 Jy/beam
! Combined flux in latest and established models = 0.0292011 Jy
! Adding 114 model components to the UV plane model.
! The established model now contains 227 components and 0.0292011 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.146 mas, bmaj=15.3 mas, bpa=-1.074 degrees
! Estimated noise=1.17313 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000265989 Jy
! Component: 100  -  total flux cleaned = 0.000508731 Jy
! Component: 150  -  total flux cleaned = 0.000707385 Jy
! Component: 200  -  total flux cleaned = 0.000941183 Jy
! Total flux subtracted in 200 components = 0.000941183 Jy
! Clean residual min=-0.000377 max=0.000377 Jy/beam
! Clean residual mean=-0.000010 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.0301422 Jy
selfcal
! Performing phase self-cal
! Adding 83 model components to the UV plane model.
! The established model now contains 307 components and 0.0301422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035404Jy  sigma=0.482918
! Fit after  self-cal, rms=0.035403Jy  sigma=0.482653
wmodel J1401-3835_X_map.mod
! Writing 307 model components to file: J1401-3835_X_map.mod
wobs   J1401-3835_X_uvs.fits
! Writing UV FITS file: J1401-3835_X_uvs.fits
wwins  J1401-3835_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /tmp/maps//J1401-3835_X_20180615_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.146 x 15.3 at -1.074 degrees (North through East)
! Clean map  min=-0.0021728  max=0.015541 Jy/beam
! Writing clean map to FITS file: /tmp/maps//J1401-3835_X_20180615_map.fits
wmodel /tmp/maps//J1401-3835_X_20180615_map.mod
! Writing 307 model components to file: /tmp/maps//J1401-3835_X_20180615_map.mod
wobs   /tmp/maps//J1401-3835_X_20180615_uvs.fits
! Writing UV FITS file: /tmp/maps//J1401-3835_X_20180615_uvs.fits
wwins  /tmp/maps//J1401-3835_X_20180615_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0155415 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000154831 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.98874 2.98874 5.97748 11.955 23.9099 47.8198 95.6396
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.015 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  100.376 
quit
! Quitting program
! Log file /tmp/maps//J1401-3835_X_20180615_dfm.log closed on Wed Jul  4 23:28:04 2018