! Started logfile: /tmp/maps//J1245-1616_C_20180615_dfm.log on Wed Jul  4 23:21:36 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /tmp/maps//J1245-1616_C_20180615_uva.fits
! Reading UV FITS file: /tmp/maps//J1245-1616_C_20180615_uva.fits
! AN table 1: 17 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.932026 visibilities/baseline/integration-bin.
! Found source: J1245-1616
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 5704 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1245-1616_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 8 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.620378Jy  sigma=36.156680
! Fit after  self-cal, rms=0.252097Jy  sigma=5.369902
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.215 mas, bmaj=3.502 mas, bpa=-3.306 degrees
! Estimated noise=0.600192 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.944147 Jy
! Component: 100  -  total flux cleaned = 1.15003 Jy
! Total flux subtracted in 100 components = 1.15003 Jy
! Clean residual min=-0.027986 max=0.057426 Jy/beam
! Clean residual mean=-0.000037 rms=0.007544 Jy/beam
! Combined flux in latest and established models = 1.15003 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1.15003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.150411Jy  sigma=2.899299
! Fit after  self-cal, rms=0.150408Jy  sigma=2.899277
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0473741 Jy
! Component: 100  -  total flux cleaned = 0.0579399 Jy
! Total flux subtracted in 100 components = 0.0579399 Jy
! Clean residual min=-0.030044 max=0.036291 Jy/beam
! Clean residual mean=-0.000031 rms=0.006524 Jy/beam
! Combined flux in latest and established models = 1.20797 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 1.20797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.135157Jy  sigma=2.525954
! Fit after  self-cal, rms=0.135145Jy  sigma=2.525731
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.596 mas, bmaj=4.056 mas, bpa=-2.249 degrees
! Estimated noise=0.436239 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102396 Jy
! Component: 100  -  total flux cleaned = 0.0112349 Jy
! Component: 150  -  total flux cleaned = 0.0112634 Jy
! Component: 200  -  total flux cleaned = 0.0112809 Jy
! Total flux subtracted in 200 components = 0.0112809 Jy
! Clean residual min=-0.031575 max=0.036504 Jy/beam
! Clean residual mean=-0.000077 rms=0.006858 Jy/beam
! Combined flux in latest and established models = 1.21925 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 21 components and 1.21925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.133113Jy  sigma=2.498223
! Fit after  self-cal, rms=0.133104Jy  sigma=2.497817
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.596 x 4.056 at -2.249 degrees (North through East)
! Clean map  min=-0.030777  max=1.2087 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.98     HN        0.96     KP        1.02     
!   LA        1.06     MK        0.97     NL        1.05     OV        1.03     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.99     HN        0.94     KP        1.00     
!   LA        1.06     MK        1.05     NL        1.07     OV        1.05     
!   PT        0.94     SC        1.07     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        1.01     HN        1.01     KP        1.02     
!   LA        1.05     MK        1.02     NL        1.02     OV        1.07     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.93     HN        0.73     KP        0.99     
!   LA        1.04     MK        1.02     NL        1.08     OV        1.02     
!   PT        0.81     SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        1.02     KP        0.99     
!   LA        1.06     MK        1.03     NL        1.07     OV        1.00     
!   PT        0.92     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.93     HN        0.95     KP        0.99     
!   LA        1.04     MK        0.94     NL        1.01     OV        0.99     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.93     HN        0.98     KP        0.97     
!   LA        1.02     MK        0.99     NL        1.03     OV        1.01     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.94     HN        0.94     KP        0.96     
!   LA        1.04     MK        1.00     NL        1.04     OV        0.99     
!   PT        0.92     SC        0.93     
! 
! 
! Fit before self-cal, rms=0.133104Jy  sigma=2.497817
! Fit after  self-cal, rms=0.049309Jy  sigma=0.788177
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.587 mas, bmaj=4.076 mas, bpa=-2.315 degrees
! Estimated noise=0.435377 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.9, -7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00461097 Jy
! Component: 100  -  total flux cleaned = 0.00564788 Jy
! Component: 150  -  total flux cleaned = 0.0057664 Jy
! Component: 200  -  total flux cleaned = 0.00586691 Jy
! Total flux subtracted in 200 components = 0.00586691 Jy
! Clean residual min=-0.002925 max=0.003152 Jy/beam
! Clean residual mean=-0.000006 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 1.22512 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 48 components and 1.22512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048261Jy  sigma=0.757848
! Fit after  self-cal, rms=0.048251Jy  sigma=0.756081
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.048251Jy  sigma=0.756081
! Fit after  self-cal, rms=0.048161Jy  sigma=0.755426
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.586 mas, bmaj=4.076 mas, bpa=-2.316 degrees
! Estimated noise=0.435179 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000932707 Jy
! Component: 100  -  total flux cleaned = 0.00111484 Jy
! Component: 150  -  total flux cleaned = 0.00111812 Jy
! Component: 200  -  total flux cleaned = 0.0011183 Jy
! Total flux subtracted in 200 components = 0.0011183 Jy
! Clean residual min=-0.002645 max=0.002915 Jy/beam
! Clean residual mean=-0.000005 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 1.22624 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 58 components and 1.22624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047844Jy  sigma=0.747882
! Fit after  self-cal, rms=0.047835Jy  sigma=0.747237
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.9, 23.7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00281993 Jy
! Component: 100  -  total flux cleaned = 0.0033958 Jy
! Component: 150  -  total flux cleaned = 0.00357649 Jy
! Component: 200  -  total flux cleaned = 0.00352618 Jy
! Total flux subtracted in 200 components = 0.00352618 Jy
! Clean residual min=-0.002690 max=0.002248 Jy/beam
! Clean residual mean=-0.000005 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 1.22977 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 71 components and 1.22977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047568Jy  sigma=0.740881
! Fit after  self-cal, rms=0.047576Jy  sigma=0.740659
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047576Jy  sigma=0.740659
! Fit after  self-cal, rms=0.047518Jy  sigma=0.740306
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.586 mas, bmaj=4.076 mas, bpa=-2.323 degrees
! Estimated noise=0.435146 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000611767 Jy
! Component: 100  -  total flux cleaned = 0.000658591 Jy
! Component: 150  -  total flux cleaned = 0.000573241 Jy
! Component: 200  -  total flux cleaned = 0.000532393 Jy
! Total flux subtracted in 200 components = 0.000532393 Jy
! Clean residual min=-0.002365 max=0.002166 Jy/beam
! Clean residual mean=-0.000005 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 1.2303 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 81 components and 1.2303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047410Jy  sigma=0.738161
! Fit after  self-cal, rms=0.047413Jy  sigma=0.738035
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000185456 Jy
! Component: 100  -  total flux cleaned = 0.00011448 Jy
! Component: 150  -  total flux cleaned = 8.02967e-05 Jy
! Component: 200  -  total flux cleaned = 4.73806e-05 Jy
! Total flux subtracted in 200 components = 4.73806e-05 Jy
! Clean residual min=-0.002261 max=0.002066 Jy/beam
! Clean residual mean=-0.000005 rms=0.000487 Jy/beam
! Combined flux in latest and established models = 1.23034 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 88 components and 1.23035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047346Jy  sigma=0.736797
! Fit after  self-cal, rms=0.047348Jy  sigma=0.736745
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047348Jy  sigma=0.736745
! Fit after  self-cal, rms=0.047332Jy  sigma=0.736631
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.727 mas, bmaj=7.712 mas, bpa=-1.046 degrees
! Estimated noise=0.555647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.23544e-05 Jy
! Component: 100  -  total flux cleaned = 7.41188e-06 Jy
! Component: 150  -  total flux cleaned = -0.000108335 Jy
! Component: 200  -  total flux cleaned = -0.000151263 Jy
! Total flux subtracted in 200 components = -0.000151263 Jy
! Clean residual min=-0.002586 max=0.002051 Jy/beam
! Clean residual mean=-0.000008 rms=0.000629 Jy/beam
! Combined flux in latest and established models = 1.23019 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 104 components and 1.23019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047306Jy  sigma=0.736210
! Fit after  self-cal, rms=0.047310Jy  sigma=0.736171
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000190955 Jy
! Component: 100  -  total flux cleaned = -0.000251614 Jy
! Component: 150  -  total flux cleaned = -0.000307478 Jy
! Component: 200  -  total flux cleaned = -0.000343071 Jy
! Total flux subtracted in 200 components = -0.000343071 Jy
! Clean residual min=-0.002609 max=0.002021 Jy/beam
! Clean residual mean=-0.000008 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 1.22985 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 111 components and 1.22985 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047300Jy  sigma=0.736098
! Fit after  self-cal, rms=0.047304Jy  sigma=0.736088
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.586 mas, bmaj=4.076 mas, bpa=-2.33 degrees
! Estimated noise=0.435187 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.586 x 4.076 at -2.33 degrees (North through East)
! Clean map  min=-0.0022187  max=1.2056 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047304Jy  sigma=0.736088
! Fit after  self-cal, rms=0.044019Jy  sigma=0.657683
! Inverting map and beam 
! Estimated beam: bmin=1.586 mas, bmaj=4.075 mas, bpa=-2.331 degrees
! Estimated noise=0.435365 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000513556 Jy
! Component: 100  -  total flux cleaned = 0.000644122 Jy
! Component: 150  -  total flux cleaned = 0.00064252 Jy
! Component: 200  -  total flux cleaned = 0.000613776 Jy
! Total flux subtracted in 200 components = 0.000613776 Jy
! Clean residual min=-0.002133 max=0.001956 Jy/beam
! Clean residual mean=-0.000004 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 1.23046 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 116 components and 1.23046 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043961Jy  sigma=0.656549
! Fit after  self-cal, rms=0.043964Jy  sigma=0.656517
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.66608e-05 Jy
! Component: 100  -  total flux cleaned = 4.13812e-05 Jy
! Component: 150  -  total flux cleaned = 1.77124e-05 Jy
! Component: 200  -  total flux cleaned = -2.77951e-05 Jy
! Total flux subtracted in 200 components = -2.77951e-05 Jy
! Clean residual min=-0.002087 max=0.001847 Jy/beam
! Clean residual mean=-0.000004 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 1.23044 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 121 components and 1.23044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043927Jy  sigma=0.655878
! Fit after  self-cal, rms=0.043928Jy  sigma=0.655867
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043928Jy  sigma=0.655867
! Fit after  self-cal, rms=0.043922Jy  sigma=0.655769
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.207 mas, bmaj=3.512 mas, bpa=-3.225 degrees
! Estimated noise=0.596183 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.938626 Jy
! Component: 100  -  total flux cleaned = 1.14331 Jy
! Component: 150  -  total flux cleaned = 1.19144 Jy
! Component: 200  -  total flux cleaned = 1.2102 Jy
! Total flux subtracted in 200 components = 1.2102 Jy
! Clean residual min=-0.007456 max=0.008296 Jy/beam
! Clean residual mean=-0.000004 rms=0.001222 Jy/beam
! Combined flux in latest and established models = 1.2102 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 1.2102 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.586 mas, bmaj=4.075 mas, bpa=-2.339 degrees
! Estimated noise=0.435433 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114363 Jy
! Component: 100  -  total flux cleaned = 0.0148839 Jy
! Component: 150  -  total flux cleaned = 0.0169177 Jy
! Component: 200  -  total flux cleaned = 0.0180886 Jy
! Total flux subtracted in 200 components = 0.0180886 Jy
! Clean residual min=-0.003027 max=0.002910 Jy/beam
! Clean residual mean=-0.000004 rms=0.000643 Jy/beam
! Combined flux in latest and established models = 1.22829 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 32 components and 1.22829 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.726 mas, bmaj=7.711 mas, bpa=-1.051 degrees
! Estimated noise=0.556093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00241374 Jy
! Component: 100  -  total flux cleaned = 0.00277891 Jy
! Component: 150  -  total flux cleaned = 0.00267599 Jy
! Component: 200  -  total flux cleaned = 0.00272138 Jy
! Total flux subtracted in 200 components = 0.00272138 Jy
! Clean residual min=-0.002291 max=0.002194 Jy/beam
! Clean residual mean=-0.000006 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 1.23101 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.03228e-06 Jy
! Component: 100  -  total flux cleaned = -3.81212e-05 Jy
! Component: 150  -  total flux cleaned = -6.66771e-06 Jy
! Component: 200  -  total flux cleaned = -7.10152e-06 Jy
! Total flux subtracted in 200 components = -7.10152e-06 Jy
! Clean residual min=-0.002367 max=0.002108 Jy/beam
! Clean residual mean=-0.000007 rms=0.000605 Jy/beam
! Combined flux in latest and established models = 1.231 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 64 components and 1.23101 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.586 mas, bmaj=4.075 mas, bpa=-2.339 degrees
! Estimated noise=0.435433 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000445327 Jy
! Component: 100  -  total flux cleaned = -0.000225669 Jy
! Component: 150  -  total flux cleaned = -0.00015939 Jy
! Component: 200  -  total flux cleaned = -0.000102584 Jy
! Total flux subtracted in 200 components = -0.000102584 Jy
! Clean residual min=-0.002475 max=0.002356 Jy/beam
! Clean residual mean=-0.000004 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 1.2309 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 77 components and 1.2309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044047Jy  sigma=0.660688
! Fit after  self-cal, rms=0.044017Jy  sigma=0.659356
wmodel J1245-1616_C_map.mod
! Writing 77 model components to file: J1245-1616_C_map.mod
wobs   J1245-1616_C_uvs.fits
! Writing UV FITS file: J1245-1616_C_uvs.fits
wwins  J1245-1616_C_map.win
! wwins: Wrote 3 windows to J1245-1616_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000447324 Jy
! Component: 100  -  total flux cleaned = -0.000205224 Jy
! Component: 150  -  total flux cleaned = 5.19856e-05 Jy
! Component: 200  -  total flux cleaned = 0.000263499 Jy
! Component: 250  -  total flux cleaned = 0.000495196 Jy
! Component: 300  -  total flux cleaned = 0.000717915 Jy
! Component: 350  -  total flux cleaned = 0.000878505 Jy
! Component: 400  -  total flux cleaned = 0.00105953 Jy
! Component: 450  -  total flux cleaned = 0.0012101 Jy
! Component: 500  -  total flux cleaned = 0.00133188 Jy
! Component: 550  -  total flux cleaned = 0.00145024 Jy
! Component: 600  -  total flux cleaned = 0.00154158 Jy
! Component: 650  -  total flux cleaned = 0.00154187 Jy
! Component: 700  -  total flux cleaned = 0.00152004 Jy
! Component: 750  -  total flux cleaned = 0.00145654 Jy
! Component: 800  -  total flux cleaned = 0.00147787 Jy
! Component: 850  -  total flux cleaned = 0.00143666 Jy
! Component: 900  -  total flux cleaned = 0.00143704 Jy
! Component: 950  -  total flux cleaned = 0.0014368 Jy
! Component: 1000  -  total flux cleaned = 0.00143714 Jy
! Component: 1050  -  total flux cleaned = 0.00145563 Jy
! Component: 1100  -  total flux cleaned = 0.00141825 Jy
! Component: 1150  -  total flux cleaned = 0.00141842 Jy
! Component: 1200  -  total flux cleaned = 0.00141846 Jy
! Component: 1250  -  total flux cleaned = 0.00138284 Jy
! Component: 1300  -  total flux cleaned = 0.0013651 Jy
! Component: 1350  -  total flux cleaned = 0.00129579 Jy
! Component: 1400  -  total flux cleaned = 0.0012956 Jy
! Component: 1450  -  total flux cleaned = 0.00114532 Jy
! Component: 1500  -  total flux cleaned = 0.00107933 Jy
! Component: 1550  -  total flux cleaned = 0.000949392 Jy
! Component: 1600  -  total flux cleaned = 0.000901389 Jy
! Component: 1650  -  total flux cleaned = 0.000775214 Jy
! Component: 1700  -  total flux cleaned = 0.000712778 Jy
! Component: 1750  -  total flux cleaned = 0.000635846 Jy
! Component: 1800  -  total flux cleaned = 0.000544722 Jy
! Component: 1850  -  total flux cleaned = 0.000484781 Jy
! Component: 1900  -  total flux cleaned = 0.000395741 Jy
! Component: 1950  -  total flux cleaned = 0.000322544 Jy
! Component: 2000  -  total flux cleaned = 0.000279203 Jy
! Component: 2050  -  total flux cleaned = 0.000193556 Jy
! Component: 2100  -  total flux cleaned = 0.0001371 Jy
! Component: 2150  -  total flux cleaned = 5.37437e-05 Jy
! Component: 2200  -  total flux cleaned = 5.40803e-05 Jy
! Component: 2250  -  total flux cleaned = 1.33961e-05 Jy
! Component: 2300  -  total flux cleaned = -2.67896e-05 Jy
! Component: 2350  -  total flux cleaned = -2.66291e-05 Jy
! Component: 2400  -  total flux cleaned = -6.63271e-05 Jy
! Component: 2450  -  total flux cleaned = -0.000105572 Jy
! Component: 2500  -  total flux cleaned = -0.000131547 Jy
! Component: 2550  -  total flux cleaned = -0.000182369 Jy
! Component: 2600  -  total flux cleaned = -0.000220033 Jy
! Component: 2650  -  total flux cleaned = -0.000244939 Jy
! Component: 2700  -  total flux cleaned = -0.000318935 Jy
! Component: 2750  -  total flux cleaned = -0.000367372 Jy
! Component: 2800  -  total flux cleaned = -0.000343286 Jy
! Component: 2850  -  total flux cleaned = -0.000427055 Jy
! Component: 2900  -  total flux cleaned = -0.000474507 Jy
! Component: 2950  -  total flux cleaned = -0.000568208 Jy
! Component: 3000  -  total flux cleaned = -0.000649278 Jy
! Component: 3050  -  total flux cleaned = -0.00072942 Jy
! Component: 3100  -  total flux cleaned = -0.000786203 Jy
! Component: 3150  -  total flux cleaned = -0.000876306 Jy
! Component: 3200  -  total flux cleaned = -0.000954236 Jy
! Component: 3250  -  total flux cleaned = -0.000998233 Jy
! Component: 3300  -  total flux cleaned = -0.00106377 Jy
! Component: 3350  -  total flux cleaned = -0.00116135 Jy
! Component: 3400  -  total flux cleaned = -0.00122574 Jy
! Component: 3450  -  total flux cleaned = -0.00130026 Jy
! Component: 3500  -  total flux cleaned = -0.00138473 Jy
! Component: 3550  -  total flux cleaned = -0.00147899 Jy
! Component: 3600  -  total flux cleaned = -0.00158266 Jy
! Component: 3650  -  total flux cleaned = -0.00162371 Jy
! Component: 3700  -  total flux cleaned = -0.00173607 Jy
! Component: 3750  -  total flux cleaned = -0.00183708 Jy
! Component: 3800  -  total flux cleaned = -0.00186711 Jy
! Component: 3850  -  total flux cleaned = -0.00196667 Jy
! Component: 3900  -  total flux cleaned = -0.00203562 Jy
! Component: 3950  -  total flux cleaned = -0.00209442 Jy
! Component: 4000  -  total flux cleaned = -0.00216251 Jy
! Component: 4050  -  total flux cleaned = -0.00219156 Jy
! Total flux subtracted in 4096 components = -0.00227775 Jy
! Clean residual min=-0.000620 max=0.000535 Jy/beam
! Clean residual mean=-0.000001 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 1.22863 Jy
keep
! Adding 288 model components to the UV plane model.
! The established model now contains 363 components and 1.22863 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /tmp/maps//J1245-1616_C_20180615_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.586 x 4.075 at -2.339 degrees (North through East)
! Clean map  min=-0.0019866  max=1.2034 Jy/beam
! Writing clean map to FITS file: /tmp/maps//J1245-1616_C_20180615_map.fits
wmodel /tmp/maps//J1245-1616_C_20180615_map.mod
! Writing 363 model components to file: /tmp/maps//J1245-1616_C_20180615_map.mod
wobs   /tmp/maps//J1245-1616_C_20180615_uvs.fits
! Writing UV FITS file: /tmp/maps//J1245-1616_C_20180615_uvs.fits
wwins  /tmp/maps//J1245-1616_C_20180615_map.win
! wwins: Wrote 4 windows to /tmp/maps//J1245-1616_C_20180615_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.2034 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000166211 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0414352 0.0414352 0.0828705 0.165741 0.331482 0.662964 1.32593 2.65185 5.30371 10.6074 21.2148 42.4297 84.8594
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.203 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  7240.21 
quit
! Quitting program
! Log file /tmp/maps//J1245-1616_C_20180615_dfm.log closed on Wed Jul  4 23:21:40 2018