! Started logfile: /tmp/maps//J1101+4108_X_20180604_dfm.log on Wed Jul  4 23:12:33 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    7.39200
obs     /tmp/maps//J1101+4108_X_20180604_uva.fits
! Reading UV FITS file: /tmp/maps//J1101+4108_X_20180604_uva.fits
! AN table 1: 135 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.997037 visibilities/baseline/integration-bin.
! Found source: J1101+4108
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 48456 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1101+4108_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000262Jy  sigma=28.604874
! Fit after  self-cal, rms=0.992191Jy  sigma=28.375820
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6521 mas, bmaj=2.467 mas, bpa=5.227 degrees
! Estimated noise=0.277547 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00624786 Jy
! Component: 100  -  total flux cleaned = 0.00754441 Jy
! Total flux subtracted in 100 components = 0.00754441 Jy
! Clean residual min=-0.000742 max=0.000782 Jy/beam
! Clean residual mean=-0.000000 rms=0.000183 Jy/beam
! Combined flux in latest and established models = 0.00754441 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.00754441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024044Jy  sigma=0.666800
! Fit after  self-cal, rms=0.022800Jy  sigma=0.629936
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00354012 Jy
! Component: 100  -  total flux cleaned = 0.00395627 Jy
! Total flux subtracted in 100 components = 0.00395627 Jy
! Clean residual min=-0.000668 max=0.000971 Jy/beam
! Clean residual mean=-0.000000 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.0115007 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 7 components and 0.0115007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022358Jy  sigma=0.617522
! Fit after  self-cal, rms=0.022351Jy  sigma=0.617414
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8879 mas, bmaj=2.554 mas, bpa=4.834 degrees
! Estimated noise=0.115141 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000477459 Jy
! Component: 100  -  total flux cleaned = 0.000421857 Jy
! Component: 150  -  total flux cleaned = 0.000316198 Jy
! Component: 200  -  total flux cleaned = 0.000247345 Jy
! Total flux subtracted in 200 components = 0.000247345 Jy
! Clean residual min=-0.000388 max=0.000500 Jy/beam
! Clean residual mean=0.000000 rms=0.000098 Jy/beam
! Combined flux in latest and established models = 0.011748 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 28 components and 0.011748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022328Jy  sigma=0.616764
! Fit after  self-cal, rms=0.022304Jy  sigma=0.616461
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8879 x 2.554 at 4.834 degrees (North through East)
! Clean map  min=-0.00054172  max=0.011668 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.19     HN        0.98     KP        0.90     
!   LA        1.11     MK        1.07     NL        1.13     OV        0.95     
!   PT        0.94     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.17     HN        1.01     KP        0.98     
!   LA        1.08     MK        0.98     NL        1.11     OV        0.88     
!   PT        0.92     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        1.00     KP        1.06     
!   LA        1.12     MK        0.97     NL        1.12     OV        1.01     
!   PT        0.93     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.90     KP        1.08     
!   LA        1.08     MK        0.94     NL        1.17     OV        0.93     
!   PT        0.92     SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.03     HN        0.98     KP        0.97     
!   LA        1.12     MK        1.00     NL        1.12     OV        0.89     
!   PT        0.92     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.08     HN        0.90     KP        0.96     
!   LA        1.02     MK        0.96     NL        1.04     OV        0.91     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        0.91     KP        1.07     
!   LA        1.02     MK        0.92     NL        1.25     OV        0.86     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.94     HN        0.92     KP        1.17     
!   LA        0.98     MK        0.96     NL        1.22     OV        0.91     
!   PT        1.03     SC        0.90     
! 
! 
! Fit before self-cal, rms=0.022304Jy  sigma=0.616461
! Fit after  self-cal, rms=0.022170Jy  sigma=0.615412
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8785 mas, bmaj=2.54 mas, bpa=4.837 degrees
! Estimated noise=0.115069 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.60711e-05 Jy
! Component: 100  -  total flux cleaned = -7.74612e-05 Jy
! Component: 150  -  total flux cleaned = -8.95839e-05 Jy
! Component: 200  -  total flux cleaned = -9.51278e-05 Jy
! Total flux subtracted in 200 components = -9.51278e-05 Jy
! Clean residual min=-0.000301 max=0.000252 Jy/beam
! Clean residual mean=-0.000000 rms=0.000062 Jy/beam
! Combined flux in latest and established models = 0.0116529 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 45 components and 0.0116529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022169Jy  sigma=0.615386
! Fit after  self-cal, rms=0.022189Jy  sigma=0.614709
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022189Jy  sigma=0.614709
! Fit after  self-cal, rms=0.022403Jy  sigma=0.614580
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8769 mas, bmaj=2.538 mas, bpa=4.83 degrees
! Estimated noise=0.115317 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.30252e-05 Jy
! Component: 100  -  total flux cleaned = -7.02735e-05 Jy
! Component: 150  -  total flux cleaned = -6.73736e-05 Jy
! Component: 200  -  total flux cleaned = -6.99615e-05 Jy
! Total flux subtracted in 200 components = -6.99615e-05 Jy
! Clean residual min=-0.000299 max=0.000250 Jy/beam
! Clean residual mean=-0.000000 rms=0.000062 Jy/beam
! Combined flux in latest and established models = 0.0115829 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 52 components and 0.0115829 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022402Jy  sigma=0.614556
! Fit after  self-cal, rms=0.022418Jy  sigma=0.614334
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.08933e-05 Jy
! Component: 100  -  total flux cleaned = -3.00674e-05 Jy
! Component: 150  -  total flux cleaned = -4.42261e-05 Jy
! Component: 200  -  total flux cleaned = -5.43457e-05 Jy
! Total flux subtracted in 200 components = -5.43457e-05 Jy
! Clean residual min=-0.000298 max=0.000250 Jy/beam
! Clean residual mean=-0.000000 rms=0.000063 Jy/beam
! Combined flux in latest and established models = 0.0115286 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 58 components and 0.0115286 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022418Jy  sigma=0.614312
! Fit after  self-cal, rms=0.022418Jy  sigma=0.614286
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022418Jy  sigma=0.614286
! Fit after  self-cal, rms=0.022797Jy  sigma=0.614312
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8773 mas, bmaj=2.539 mas, bpa=4.822 degrees
! Estimated noise=0.116596 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.06007e-05 Jy
! Component: 100  -  total flux cleaned = 6.808e-05 Jy
! Component: 150  -  total flux cleaned = 7.39117e-05 Jy
! Component: 200  -  total flux cleaned = 7.63541e-05 Jy
! Total flux subtracted in 200 components = 7.63541e-05 Jy
! Clean residual min=-0.000307 max=0.000256 Jy/beam
! Clean residual mean=-0.000000 rms=0.000063 Jy/beam
! Combined flux in latest and established models = 0.0116049 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 69 components and 0.0116049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022796Jy  sigma=0.614287
! Fit after  self-cal, rms=0.022807Jy  sigma=0.614224
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.71306e-06 Jy
! Component: 100  -  total flux cleaned = -3.76562e-06 Jy
! Component: 150  -  total flux cleaned = -3.58514e-06 Jy
! Component: 200  -  total flux cleaned = -1.27157e-06 Jy
! Total flux subtracted in 200 components = -1.27157e-06 Jy
! Clean residual min=-0.000302 max=0.000252 Jy/beam
! Clean residual mean=-0.000000 rms=0.000063 Jy/beam
! Combined flux in latest and established models = 0.0116037 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 74 components and 0.0116037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022807Jy  sigma=0.614208
! Fit after  self-cal, rms=0.022807Jy  sigma=0.614163
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022807Jy  sigma=0.614163
! Fit after  self-cal, rms=0.023062Jy  sigma=0.614177
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.989 mas, bmaj=2.952 mas, bpa=2.785 degrees
! Estimated noise=0.152916 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.60287e-05 Jy
! Component: 100  -  total flux cleaned = 0.00011366 Jy
! Component: 150  -  total flux cleaned = 0.00012349 Jy
! Component: 200  -  total flux cleaned = 0.00013005 Jy
! Total flux subtracted in 200 components = 0.00013005 Jy
! Clean residual min=-0.000263 max=0.000272 Jy/beam
! Clean residual mean=-0.000000 rms=0.000073 Jy/beam
! Combined flux in latest and established models = 0.0117337 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 91 components and 0.0117337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023062Jy  sigma=0.614166
! Fit after  self-cal, rms=0.023065Jy  sigma=0.614136
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.79021e-06 Jy
! Component: 100  -  total flux cleaned = 1.25386e-05 Jy
! Component: 150  -  total flux cleaned = 2.05101e-05 Jy
! Component: 200  -  total flux cleaned = 2.58421e-05 Jy
! Total flux subtracted in 200 components = 2.58421e-05 Jy
! Clean residual min=-0.000272 max=0.000281 Jy/beam
! Clean residual mean=-0.000000 rms=0.000074 Jy/beam
! Combined flux in latest and established models = 0.0117596 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 102 components and 0.0117596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023065Jy  sigma=0.614135
! Fit after  self-cal, rms=0.023065Jy  sigma=0.614130
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8776 mas, bmaj=2.539 mas, bpa=4.838 degrees
! Estimated noise=0.117572 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8776 x 2.539 at 4.838 degrees (North through East)
! Clean map  min=-0.00054796  max=0.011786 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6452 mas, bmaj=2.445 mas, bpa=5.201 degrees
! Estimated noise=0.281451 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00959159 Jy
! Component: 100  -  total flux cleaned = 0.0117489 Jy
! Component: 150  -  total flux cleaned = 0.0120399 Jy
! Component: 200  -  total flux cleaned = 0.0120103 Jy
! Total flux subtracted in 200 components = 0.0120103 Jy
! Clean residual min=-0.000659 max=0.000737 Jy/beam
! Clean residual mean=-0.000000 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0120103 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0120103 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8776 mas, bmaj=2.539 mas, bpa=4.838 degrees
! Estimated noise=0.117572 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000162766 Jy
! Component: 100  -  total flux cleaned = -0.000176189 Jy
! Component: 150  -  total flux cleaned = -0.000176473 Jy
! Component: 200  -  total flux cleaned = -0.000190779 Jy
! Total flux subtracted in 200 components = -0.000190779 Jy
! Clean residual min=-0.000310 max=0.000267 Jy/beam
! Clean residual mean=-0.000000 rms=0.000067 Jy/beam
! Combined flux in latest and established models = 0.0118196 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 35 components and 0.0118196 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.989 mas, bmaj=2.952 mas, bpa=2.785 degrees
! Estimated noise=0.152916 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.89997e-06 Jy
! Component: 100  -  total flux cleaned = 7.87812e-07 Jy
! Component: 150  -  total flux cleaned = -2.94389e-06 Jy
! Component: 200  -  total flux cleaned = -1.13286e-05 Jy
! Total flux subtracted in 200 components = -1.13286e-05 Jy
! Clean residual min=-0.000281 max=0.000277 Jy/beam
! Clean residual mean=-0.000000 rms=0.000075 Jy/beam
! Combined flux in latest and established models = 0.0118082 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.34148e-06 Jy
! Component: 100  -  total flux cleaned = 4.54295e-06 Jy
! Component: 150  -  total flux cleaned = 4.56772e-06 Jy
! Component: 200  -  total flux cleaned = 2.61608e-06 Jy
! Total flux subtracted in 200 components = 2.61608e-06 Jy
! Clean residual min=-0.000279 max=0.000279 Jy/beam
! Clean residual mean=-0.000000 rms=0.000075 Jy/beam
! Combined flux in latest and established models = 0.0118108 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 52 components and 0.0118108 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8776 mas, bmaj=2.539 mas, bpa=4.838 degrees
! Estimated noise=0.117572 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.89153e-05 Jy
! Component: 100  -  total flux cleaned = -4.55177e-05 Jy
! Component: 150  -  total flux cleaned = -4.547e-05 Jy
! Component: 200  -  total flux cleaned = -5.32231e-05 Jy
! Total flux subtracted in 200 components = -5.32231e-05 Jy
! Clean residual min=-0.000308 max=0.000264 Jy/beam
! Clean residual mean=-0.000000 rms=0.000064 Jy/beam
! Combined flux in latest and established models = 0.0117576 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 69 components and 0.0117576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023065Jy  sigma=0.614130
! Fit after  self-cal, rms=0.023066Jy  sigma=0.614119
wmodel J1101+4108_X_map.mod
! Writing 69 model components to file: J1101+4108_X_map.mod
wobs   J1101+4108_X_uvs.fits
! Writing UV FITS file: J1101+4108_X_uvs.fits
wwins  J1101+4108_X_map.win
! wwins: Wrote 2 windows to J1101+4108_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.74725e-05 Jy
! Component: 100  -  total flux cleaned = -7.30541e-05 Jy
! Component: 150  -  total flux cleaned = -6.43163e-05 Jy
! Component: 200  -  total flux cleaned = -4.7591e-05 Jy
! Component: 250  -  total flux cleaned = -4.76802e-05 Jy
! Component: 300  -  total flux cleaned = -3.98861e-05 Jy
! Component: 350  -  total flux cleaned = -2.46323e-05 Jy
! Component: 400  -  total flux cleaned = -1.71757e-05 Jy
! Component: 450  -  total flux cleaned = -6.29818e-06 Jy
! Component: 500  -  total flux cleaned = -9.86761e-06 Jy
! Component: 550  -  total flux cleaned = -1.32859e-05 Jy
! Component: 600  -  total flux cleaned = -1.32297e-05 Jy
! Component: 650  -  total flux cleaned = -3.09191e-06 Jy
! Component: 700  -  total flux cleaned = 3.5419e-06 Jy
! Component: 750  -  total flux cleaned = 6.81618e-06 Jy
! Component: 800  -  total flux cleaned = 1.32274e-05 Jy
! Component: 850  -  total flux cleaned = 3.65976e-06 Jy
! Component: 900  -  total flux cleaned = 1.93673e-05 Jy
! Component: 950  -  total flux cleaned = 2.55439e-05 Jy
! Component: 1000  -  total flux cleaned = 2.55961e-05 Jy
! Component: 1050  -  total flux cleaned = 3.77523e-05 Jy
! Component: 1100  -  total flux cleaned = 4.37155e-05 Jy
! Component: 1150  -  total flux cleaned = 4.66691e-05 Jy
! Component: 1200  -  total flux cleaned = 4.66823e-05 Jy
! Component: 1250  -  total flux cleaned = 4.66654e-05 Jy
! Component: 1300  -  total flux cleaned = 4.95482e-05 Jy
! Component: 1350  -  total flux cleaned = 4.67029e-05 Jy
! Component: 1400  -  total flux cleaned = 4.66829e-05 Jy
! Component: 1450  -  total flux cleaned = 4.11079e-05 Jy
! Component: 1500  -  total flux cleaned = 3.56021e-05 Jy
! Component: 1550  -  total flux cleaned = 3.01403e-05 Jy
! Component: 1600  -  total flux cleaned = 2.74183e-05 Jy
! Component: 1650  -  total flux cleaned = 1.66715e-05 Jy
! Component: 1700  -  total flux cleaned = 3.53284e-05 Jy
! Component: 1750  -  total flux cleaned = 3.265e-05 Jy
! Component: 1800  -  total flux cleaned = 1.95572e-05 Jy
! Component: 1850  -  total flux cleaned = 1.95636e-05 Jy
! Component: 1900  -  total flux cleaned = 1.6974e-05 Jy
! Component: 1950  -  total flux cleaned = 1.62417e-06 Jy
! Component: 2000  -  total flux cleaned = 1.43239e-05 Jy
! Component: 2050  -  total flux cleaned = 6.73375e-06 Jy
! Component: 2100  -  total flux cleaned = -3.24455e-06 Jy
! Component: 2150  -  total flux cleaned = 6.69302e-06 Jy
! Component: 2200  -  total flux cleaned = -6.95918e-07 Jy
! Component: 2250  -  total flux cleaned = -8.0445e-06 Jy
! Component: 2300  -  total flux cleaned = 1.67586e-06 Jy
! Component: 2350  -  total flux cleaned = -7.96413e-06 Jy
! Component: 2400  -  total flux cleaned = -3.13658e-06 Jy
! Component: 2450  -  total flux cleaned = -5.53971e-06 Jy
! Component: 2500  -  total flux cleaned = -1.02504e-05 Jy
! Component: 2550  -  total flux cleaned = -1.72827e-05 Jy
! Component: 2600  -  total flux cleaned = -1.2607e-05 Jy
! Component: 2650  -  total flux cleaned = -1.02868e-05 Jy
! Component: 2700  -  total flux cleaned = -2.6415e-05 Jy
! Component: 2750  -  total flux cleaned = -2.87272e-05 Jy
! Component: 2800  -  total flux cleaned = -4.23814e-05 Jy
! Component: 2850  -  total flux cleaned = -4.4639e-05 Jy
! Component: 2900  -  total flux cleaned = -5.13739e-05 Jy
! Component: 2950  -  total flux cleaned = -5.13639e-05 Jy
! Component: 3000  -  total flux cleaned = -6.02382e-05 Jy
! Component: 3050  -  total flux cleaned = -6.46305e-05 Jy
! Component: 3100  -  total flux cleaned = -7.56121e-05 Jy
! Component: 3150  -  total flux cleaned = -7.77825e-05 Jy
! Component: 3200  -  total flux cleaned = -7.9951e-05 Jy
! Component: 3250  -  total flux cleaned = -8.21245e-05 Jy
! Component: 3300  -  total flux cleaned = -8.64227e-05 Jy
! Component: 3350  -  total flux cleaned = -0.000107774 Jy
! Component: 3400  -  total flux cleaned = -0.000107769 Jy
! Component: 3450  -  total flux cleaned = -0.000107767 Jy
! Component: 3500  -  total flux cleaned = -0.000118271 Jy
! Component: 3550  -  total flux cleaned = -0.000122483 Jy
! Component: 3600  -  total flux cleaned = -0.000139092 Jy
! Component: 3650  -  total flux cleaned = -0.000143217 Jy
! Component: 3700  -  total flux cleaned = -0.000134984 Jy
! Component: 3750  -  total flux cleaned = -0.00014932 Jy
! Component: 3800  -  total flux cleaned = -0.000147284 Jy
! Component: 3850  -  total flux cleaned = -0.000155401 Jy
! Component: 3900  -  total flux cleaned = -0.000153402 Jy
! Component: 3950  -  total flux cleaned = -0.000163457 Jy
! Component: 4000  -  total flux cleaned = -0.000163465 Jy
! Component: 4050  -  total flux cleaned = -0.000163453 Jy
! Total flux subtracted in 4096 components = -0.000173343 Jy
! Clean residual min=-0.000137 max=0.000118 Jy/beam
! Clean residual mean=0.000000 rms=0.000035 Jy/beam
! Combined flux in latest and established models = 0.0115843 Jy
keep
! Adding 293 model components to the UV plane model.
! The established model now contains 362 components and 0.0115843 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /tmp/maps//J1101+4108_X_20180604_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8776 x 2.539 at 4.838 degrees (North through East)
! Clean map  min=-0.00054135  max=0.011715 Jy/beam
! Writing clean map to FITS file: /tmp/maps//J1101+4108_X_20180604_map.fits
wmodel /tmp/maps//J1101+4108_X_20180604_map.mod
! Writing 362 model components to file: /tmp/maps//J1101+4108_X_20180604_map.mod
wobs   /tmp/maps//J1101+4108_X_20180604_uvs.fits
! Writing UV FITS file: /tmp/maps//J1101+4108_X_20180604_uvs.fits
wwins  /tmp/maps//J1101+4108_X_20180604_map.win
! wwins: Wrote 3 windows to /tmp/maps//J1101+4108_X_20180604_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0117152 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 3.44513e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.882222 0.882222 1.76444 3.52889 7.05778 14.1156 28.2311 56.4622
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.011 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  340.05 
quit
! Quitting program
! Log file /tmp/maps//J1101+4108_X_20180604_dfm.log closed on Wed Jul  4 23:12:38 2018