! Started logfile: /tmp/maps//J1058+4304_C_20180604_dfm.log on Wed Jul  4 23:11:57 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /tmp/maps//J1058+4304_C_20180604_uva.fits
! Reading UV FITS file: /tmp/maps//J1058+4304_C_20180604_uva.fits
! AN table 1: 24 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.959259 visibilities/baseline/integration-bin.
! Found source: J1058+4304
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 3 lines of history.
! 
! Reading 8288 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J1058+4304_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.094593Jy  sigma=28.349047
! Fit after  self-cal, rms=0.598422Jy  sigma=15.967399
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.242 mas, bmaj=4.058 mas, bpa=5.673 degrees
! Estimated noise=0.44652 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.296112 Jy
! Component: 100  -  total flux cleaned = 0.365418 Jy
! Total flux subtracted in 100 components = 0.365418 Jy
! Clean residual min=-0.011920 max=0.027266 Jy/beam
! Clean residual mean=-0.000001 rms=0.003015 Jy/beam
! Combined flux in latest and established models = 0.365418 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.365418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.122950Jy  sigma=2.593978
! Fit after  self-cal, rms=0.122925Jy  sigma=2.593592
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0307004 Jy
! Component: 100  -  total flux cleaned = 0.0472587 Jy
! Total flux subtracted in 100 components = 0.0472587 Jy
! Clean residual min=-0.008676 max=0.017622 Jy/beam
! Clean residual mean=-0.000000 rms=0.002275 Jy/beam
! Combined flux in latest and established models = 0.412676 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.412676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.108066Jy  sigma=2.260453
! Fit after  self-cal, rms=0.108013Jy  sigma=2.259608
! Inverting map 
! Added new window around map position (-2.1, 0.3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.015945 Jy
! Component: 100  -  total flux cleaned = 0.0230677 Jy
! Total flux subtracted in 100 components = 0.0230677 Jy
! Clean residual min=-0.008244 max=0.013669 Jy/beam
! Clean residual mean=0.000000 rms=0.002009 Jy/beam
! Combined flux in latest and established models = 0.435744 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 34 components and 0.435744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.103516Jy  sigma=2.167842
! Fit after  self-cal, rms=0.103338Jy  sigma=2.163654
! Inverting map 
! Added new window around map position (-10.2, 13.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0109565 Jy
! Component: 100  -  total flux cleaned = 0.0159071 Jy
! Total flux subtracted in 100 components = 0.0159071 Jy
! Clean residual min=-0.007275 max=0.010214 Jy/beam
! Clean residual mean=0.000000 rms=0.001846 Jy/beam
! Combined flux in latest and established models = 0.451651 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 49 components and 0.451651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.100781Jy  sigma=2.120525
! Fit after  self-cal, rms=0.100673Jy  sigma=2.117155
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.541 mas, bmaj=4.382 mas, bpa=4.711 degrees
! Estimated noise=0.305719 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.9, -14.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0138852 Jy
! Component: 100  -  total flux cleaned = 0.0224921 Jy
! Component: 150  -  total flux cleaned = 0.0289306 Jy
! Component: 200  -  total flux cleaned = 0.0328954 Jy
! Total flux subtracted in 200 components = 0.0328954 Jy
! Clean residual min=-0.006284 max=0.009254 Jy/beam
! Clean residual mean=0.000000 rms=0.001992 Jy/beam
! Combined flux in latest and established models = 0.484547 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 89 components and 0.484547 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.097302Jy  sigma=2.073583
! Fit after  self-cal, rms=0.097155Jy  sigma=2.070042
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.541 x 4.382 at 4.711 degrees (North through East)
! Clean map  min=-0.0062031  max=0.39388 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.09     HN        0.93     KP        0.91     
!   LA        1.00     MK        1.03     NL        0.89     OV        0.96     
!   PT        0.85     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.13     HN        0.95     KP        0.94     
!   LA        0.98     MK        0.94     NL        0.94     OV        0.85     
!   PT        1.18     SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.99     HN        1.04     KP        1.02     
!   LA        1.01     MK        0.86     NL        1.15     OV        0.96     
!   PT        0.48     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        1.00     KP        0.97     
!   LA        1.02     MK        1.04     NL        0.89     OV        0.98     
!   PT        1.16     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        1.05     KP        0.97     
!   LA        1.04     MK        1.03     NL        1.13     OV        1.01     
!   PT        1.10     SC        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.19     HN        1.08     KP        1.03     
!   LA        0.98     MK        0.98     NL        1.05     OV        0.96     
!   PT        1.08     SC        1.06     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        1.04     KP        1.05     
!   LA        0.93     MK        0.97     NL        1.02     OV        0.99     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.04     HN        1.02     KP        0.99     
!   LA        1.01     MK        0.97     NL        0.97     OV        1.00     
!   PT        1.21     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.097155Jy  sigma=2.070042
! Fit after  self-cal, rms=0.034744Jy  sigma=0.821270
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.541 mas, bmaj=4.409 mas, bpa=4.686 degrees
! Estimated noise=0.304256 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00220779 Jy
! Component: 100  -  total flux cleaned = -0.00196178 Jy
! Component: 150  -  total flux cleaned = -0.00175349 Jy
! Component: 200  -  total flux cleaned = -0.00165541 Jy
! Total flux subtracted in 200 components = -0.00165541 Jy
! Clean residual min=-0.003216 max=0.003532 Jy/beam
! Clean residual mean=0.000001 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.482891 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 110 components and 0.482891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033921Jy  sigma=0.794484
! Fit after  self-cal, rms=0.033886Jy  sigma=0.792308
! Inverting map 
! Added new window around map position (-5.4, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00287874 Jy
! Component: 100  -  total flux cleaned = 0.0033551 Jy
! Component: 150  -  total flux cleaned = 0.00320615 Jy
! Component: 200  -  total flux cleaned = 0.00286986 Jy
! Total flux subtracted in 200 components = 0.00286986 Jy
! Clean residual min=-0.002637 max=0.002521 Jy/beam
! Clean residual mean=0.000001 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.485761 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 128 components and 0.485761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033401Jy  sigma=0.777094
! Fit after  self-cal, rms=0.033356Jy  sigma=0.776136
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033356Jy  sigma=0.776136
! Fit after  self-cal, rms=0.033066Jy  sigma=0.771982
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.54 mas, bmaj=4.409 mas, bpa=4.654 degrees
! Estimated noise=0.303477 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000707499 Jy
! Component: 100  -  total flux cleaned = -0.000401806 Jy
! Component: 150  -  total flux cleaned = -0.000401742 Jy
! Component: 200  -  total flux cleaned = -0.000513765 Jy
! Total flux subtracted in 200 components = -0.000513765 Jy
! Clean residual min=-0.001980 max=0.002056 Jy/beam
! Clean residual mean=0.000000 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.485247 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 145 components and 0.485247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032785Jy  sigma=0.762963
! Fit after  self-cal, rms=0.032762Jy  sigma=0.762506
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-25.2, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00211834 Jy
! Component: 100  -  total flux cleaned = 0.00225125 Jy
! Component: 150  -  total flux cleaned = 0.00215414 Jy
! Component: 200  -  total flux cleaned = 0.00197458 Jy
! Total flux subtracted in 200 components = 0.00197458 Jy
! Clean residual min=-0.001706 max=0.002015 Jy/beam
! Clean residual mean=0.000000 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.487222 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 171 components and 0.487222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032576Jy  sigma=0.756643
! Fit after  self-cal, rms=0.032564Jy  sigma=0.756450
! Inverting map 
! Added new window around map position (0, -13.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137238 Jy
! Component: 100  -  total flux cleaned = 0.000405606 Jy
! Component: 150  -  total flux cleaned = 0.000541701 Jy
! Component: 200  -  total flux cleaned = 0.000583631 Jy
! Total flux subtracted in 200 components = 0.000583631 Jy
! Clean residual min=-0.001576 max=0.001713 Jy/beam
! Clean residual mean=0.000000 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.487806 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 189 components and 0.487806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032384Jy  sigma=0.751540
! Fit after  self-cal, rms=0.032378Jy  sigma=0.751408
! Inverting map 
! Added new window around map position (41.1, 30).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013483 Jy
! Component: 100  -  total flux cleaned = 0.00156414 Jy
! Component: 150  -  total flux cleaned = 0.00175655 Jy
! Component: 200  -  total flux cleaned = 0.00186325 Jy
! Total flux subtracted in 200 components = 0.00186325 Jy
! Clean residual min=-0.001572 max=0.001420 Jy/beam
! Clean residual mean=-0.000000 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.489669 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 211 components and 0.489669 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032272Jy  sigma=0.748192
! Fit after  self-cal, rms=0.032269Jy  sigma=0.748095
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032269Jy  sigma=0.748095
! Fit after  self-cal, rms=0.031980Jy  sigma=0.741238
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.539 mas, bmaj=4.41 mas, bpa=4.624 degrees
! Estimated noise=0.303018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000553786 Jy
! Component: 100  -  total flux cleaned = -0.000475308 Jy
! Component: 150  -  total flux cleaned = -0.000544278 Jy
! Component: 200  -  total flux cleaned = -0.00051163 Jy
! Total flux subtracted in 200 components = -0.00051163 Jy
! Clean residual min=-0.001350 max=0.001262 Jy/beam
! Clean residual mean=-0.000000 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.489157 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 222 components and 0.489157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031901Jy  sigma=0.738868
! Fit after  self-cal, rms=0.031897Jy  sigma=0.738826
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.01755e-05 Jy
! Component: 100  -  total flux cleaned = 0.000146663 Jy
! Component: 150  -  total flux cleaned = 0.000201652 Jy
! Component: 200  -  total flux cleaned = 0.00025477 Jy
! Total flux subtracted in 200 components = 0.00025477 Jy
! Clean residual min=-0.001313 max=0.001203 Jy/beam
! Clean residual mean=-0.000000 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.489412 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 231 components and 0.489412 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031857Jy  sigma=0.737593
! Fit after  self-cal, rms=0.031856Jy  sigma=0.737573
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031856Jy  sigma=0.737573
! Fit after  self-cal, rms=0.031768Jy  sigma=0.735493
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.484 mas, bmaj=5.09 mas, bpa=2.351 degrees
! Estimated noise=0.394642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000793235 Jy
! Component: 100  -  total flux cleaned = -0.00067863 Jy
! Component: 150  -  total flux cleaned = -0.000645084 Jy
! Component: 200  -  total flux cleaned = -0.000588268 Jy
! Total flux subtracted in 200 components = -0.000588268 Jy
! Clean residual min=-0.001277 max=0.001258 Jy/beam
! Clean residual mean=-0.000000 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.488824 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 251 components and 0.488824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031734Jy  sigma=0.734544
! Fit after  self-cal, rms=0.031728Jy  sigma=0.734471
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.7918e-05 Jy
! Component: 100  -  total flux cleaned = 0.000174557 Jy
! Component: 150  -  total flux cleaned = 0.000217746 Jy
! Component: 200  -  total flux cleaned = 0.000237734 Jy
! Total flux subtracted in 200 components = 0.000237734 Jy
! Clean residual min=-0.001173 max=0.001151 Jy/beam
! Clean residual mean=-0.000000 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.489062 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 262 components and 0.489062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031720Jy  sigma=0.734190
! Fit after  self-cal, rms=0.031717Jy  sigma=0.734159
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.539 mas, bmaj=4.411 mas, bpa=4.611 degrees
! Estimated noise=0.302722 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.539 x 4.411 at 4.611 degrees (North through East)
! Clean map  min=-0.0017083  max=0.39207 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.241 mas, bmaj=4.079 mas, bpa=5.593 degrees
! Estimated noise=0.446666 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.296029 Jy
! Component: 100  -  total flux cleaned = 0.366037 Jy
! Component: 150  -  total flux cleaned = 0.397695 Jy
! Component: 200  -  total flux cleaned = 0.417874 Jy
! Total flux subtracted in 200 components = 0.417874 Jy
! Clean residual min=-0.005379 max=0.010730 Jy/beam
! Clean residual mean=0.000000 rms=0.001275 Jy/beam
! Combined flux in latest and established models = 0.417873 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.417873 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.539 mas, bmaj=4.411 mas, bpa=4.611 degrees
! Estimated noise=0.302722 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0203052 Jy
! Component: 100  -  total flux cleaned = 0.0321369 Jy
! Component: 150  -  total flux cleaned = 0.0399759 Jy
! Component: 200  -  total flux cleaned = 0.0457158 Jy
! Total flux subtracted in 200 components = 0.0457158 Jy
! Clean residual min=-0.002459 max=0.003302 Jy/beam
! Clean residual mean=0.000001 rms=0.000739 Jy/beam
! Combined flux in latest and established models = 0.463589 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 43 components and 0.463589 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00433059 Jy
! Component: 100  -  total flux cleaned = 0.00742194 Jy
! Component: 150  -  total flux cleaned = 0.00959597 Jy
! Component: 200  -  total flux cleaned = 0.0115453 Jy
! Total flux subtracted in 200 components = 0.0115453 Jy
! Clean residual min=-0.001744 max=0.001905 Jy/beam
! Clean residual mean=0.000001 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.475134 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 74 components and 0.475135 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.484 mas, bmaj=5.09 mas, bpa=2.351 degrees
! Estimated noise=0.394642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00325682 Jy
! Component: 100  -  total flux cleaned = 0.00565906 Jy
! Component: 150  -  total flux cleaned = 0.00754836 Jy
! Component: 200  -  total flux cleaned = 0.00854253 Jy
! Total flux subtracted in 200 components = 0.00854253 Jy
! Clean residual min=-0.001805 max=0.001642 Jy/beam
! Clean residual mean=0.000001 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.483677 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000651554 Jy
! Component: 100  -  total flux cleaned = 0.00104611 Jy
! Component: 150  -  total flux cleaned = 0.00149812 Jy
! Component: 200  -  total flux cleaned = 0.00178777 Jy
! Total flux subtracted in 200 components = 0.00178777 Jy
! Clean residual min=-0.001574 max=0.001471 Jy/beam
! Clean residual mean=0.000001 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.485465 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 146 components and 0.485465 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.539 mas, bmaj=4.411 mas, bpa=4.611 degrees
! Estimated noise=0.302722 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000389226 Jy
! Component: 100  -  total flux cleaned = -0.000189069 Jy
! Component: 150  -  total flux cleaned = 1.98062e-05 Jy
! Component: 200  -  total flux cleaned = 0.000318708 Jy
! Total flux subtracted in 200 components = 0.000318708 Jy
! Clean residual min=-0.001385 max=0.001413 Jy/beam
! Clean residual mean=0.000000 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.485784 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 165 components and 0.485784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031865Jy  sigma=0.737574
! Fit after  self-cal, rms=0.031837Jy  sigma=0.736872
wmodel J1058+4304_C_map.mod
! Writing 165 model components to file: J1058+4304_C_map.mod
wobs   J1058+4304_C_uvs.fits
! Writing UV FITS file: J1058+4304_C_uvs.fits
wwins  J1058+4304_C_map.win
! wwins: Wrote 8 windows to J1058+4304_C_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000182495 Jy
! Component: 100  -  total flux cleaned = -0.00020484 Jy
! Component: 150  -  total flux cleaned = -0.000162859 Jy
! Component: 200  -  total flux cleaned = -0.000183068 Jy
! Component: 250  -  total flux cleaned = -0.000124253 Jy
! Component: 300  -  total flux cleaned = -4.8303e-05 Jy
! Component: 350  -  total flux cleaned = 7.2479e-06 Jy
! Component: 400  -  total flux cleaned = 7.88323e-05 Jy
! Component: 450  -  total flux cleaned = 0.000165925 Jy
! Component: 500  -  total flux cleaned = 0.000165422 Jy
! Component: 550  -  total flux cleaned = 0.000182402 Jy
! Component: 600  -  total flux cleaned = 0.000166352 Jy
! Component: 650  -  total flux cleaned = 0.000215434 Jy
! Component: 700  -  total flux cleaned = 0.000263523 Jy
! Component: 750  -  total flux cleaned = 0.000294916 Jy
! Component: 800  -  total flux cleaned = 0.00029484 Jy
! Component: 850  -  total flux cleaned = 0.00034036 Jy
! Component: 900  -  total flux cleaned = 0.000355268 Jy
! Component: 950  -  total flux cleaned = 0.000428688 Jy
! Component: 1000  -  total flux cleaned = 0.000442809 Jy
! Component: 1050  -  total flux cleaned = 0.000443142 Jy
! Component: 1100  -  total flux cleaned = 0.000513691 Jy
! Component: 1150  -  total flux cleaned = 0.000541394 Jy
! Component: 1200  -  total flux cleaned = 0.000582485 Jy
! Component: 1250  -  total flux cleaned = 0.000649993 Jy
! Component: 1300  -  total flux cleaned = 0.000689842 Jy
! Component: 1350  -  total flux cleaned = 0.0007165 Jy
! Component: 1400  -  total flux cleaned = 0.00084642 Jy
! Component: 1450  -  total flux cleaned = 0.000872208 Jy
! Component: 1500  -  total flux cleaned = 0.000948325 Jy
! Component: 1550  -  total flux cleaned = 0.0010112 Jy
! Component: 1600  -  total flux cleaned = 0.00107301 Jy
! Component: 1650  -  total flux cleaned = 0.00112209 Jy
! Component: 1700  -  total flux cleaned = 0.00115841 Jy
! Component: 1750  -  total flux cleaned = 0.00115861 Jy
! Component: 1800  -  total flux cleaned = 0.00119417 Jy
! Component: 1850  -  total flux cleaned = 0.00120595 Jy
! Component: 1900  -  total flux cleaned = 0.00121749 Jy
! Component: 1950  -  total flux cleaned = 0.00127498 Jy
! Component: 2000  -  total flux cleaned = 0.00128619 Jy
! Component: 2050  -  total flux cleaned = 0.00127488 Jy
! Component: 2100  -  total flux cleaned = 0.00129733 Jy
! Component: 2150  -  total flux cleaned = 0.0012863 Jy
! Component: 2200  -  total flux cleaned = 0.0013523 Jy
! Component: 2250  -  total flux cleaned = 0.00133048 Jy
! Component: 2300  -  total flux cleaned = 0.00134125 Jy
! Component: 2350  -  total flux cleaned = 0.00136268 Jy
! Component: 2400  -  total flux cleaned = 0.00136269 Jy
! Component: 2450  -  total flux cleaned = 0.00137319 Jy
! Component: 2500  -  total flux cleaned = 0.00141488 Jy
! Component: 2550  -  total flux cleaned = 0.00140443 Jy
! Component: 2600  -  total flux cleaned = 0.00139417 Jy
! Component: 2650  -  total flux cleaned = 0.00141456 Jy
! Component: 2700  -  total flux cleaned = 0.00139439 Jy
! Component: 2750  -  total flux cleaned = 0.00138439 Jy
! Component: 2800  -  total flux cleaned = 0.00138444 Jy
! Component: 2850  -  total flux cleaned = 0.00138441 Jy
! Component: 2900  -  total flux cleaned = 0.00137461 Jy
! Component: 2950  -  total flux cleaned = 0.00137457 Jy
! Component: 3000  -  total flux cleaned = 0.00138411 Jy
! Component: 3050  -  total flux cleaned = 0.00140314 Jy
! Component: 3100  -  total flux cleaned = 0.00142222 Jy
! Component: 3150  -  total flux cleaned = 0.00139396 Jy
! Component: 3200  -  total flux cleaned = 0.00144083 Jy
! Component: 3250  -  total flux cleaned = 0.00142234 Jy
! Component: 3300  -  total flux cleaned = 0.00146842 Jy
! Component: 3350  -  total flux cleaned = 0.00146838 Jy
! Component: 3400  -  total flux cleaned = 0.0014775 Jy
! Component: 3450  -  total flux cleaned = 0.00146852 Jy
! Component: 3500  -  total flux cleaned = 0.00149542 Jy
! Component: 3550  -  total flux cleaned = 0.00151321 Jy
! Component: 3600  -  total flux cleaned = 0.00150426 Jy
! Component: 3650  -  total flux cleaned = 0.00149554 Jy
! Component: 3700  -  total flux cleaned = 0.00146931 Jy
! Component: 3750  -  total flux cleaned = 0.00148667 Jy
! Component: 3800  -  total flux cleaned = 0.00146942 Jy
! Component: 3850  -  total flux cleaned = 0.00145238 Jy
! Component: 3900  -  total flux cleaned = 0.00147802 Jy
! Component: 3950  -  total flux cleaned = 0.00144417 Jy
! Component: 4000  -  total flux cleaned = 0.0014189 Jy
! Component: 4050  -  total flux cleaned = 0.00144402 Jy
! Total flux subtracted in 4096 components = 0.00146897 Jy
! Clean residual min=-0.000479 max=0.000519 Jy/beam
! Clean residual mean=-0.000000 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.487253 Jy
keep
! Adding 342 model components to the UV plane model.
! The established model now contains 505 components and 0.487252 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /tmp/maps//J1058+4304_C_20180604_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.539 x 4.411 at 4.611 degrees (North through East)
! Clean map  min=-0.0018333  max=0.39226 Jy/beam
! Writing clean map to FITS file: /tmp/maps//J1058+4304_C_20180604_map.fits
wmodel /tmp/maps//J1058+4304_C_20180604_map.mod
! Writing 505 model components to file: /tmp/maps//J1058+4304_C_20180604_map.mod
wobs   /tmp/maps//J1058+4304_C_20180604_uvs.fits
! Writing UV FITS file: /tmp/maps//J1058+4304_C_20180604_uvs.fits
wwins  /tmp/maps//J1058+4304_C_20180604_map.win
! wwins: Wrote 9 windows to /tmp/maps//J1058+4304_C_20180604_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.392262 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00015379 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.117618 0.117618 0.235236 0.470472 0.940944 1.88189 3.76378 7.52756 15.0551 30.1102 60.2204
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.392 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2550.63 
quit
! Quitting program
! Log file /tmp/maps//J1058+4304_C_20180604_dfm.log closed on Wed Jul  4 23:12:02 2018