! Started logfile: .//J0605-3522_C_20180714_dfm.log on Sat Jul 28 19:19:13 2018 float field_size field_size = 1024 float field_cell field_cell = 0.3000 float taper_size taper_size = 40.0 float freq freq = 4.12800 obs .//J0605-3522_C_20180714_uva.fits ! Reading UV FITS file: .//J0605-3522_C_20180714_uva.fits ! AN table 1: 23 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.95942 visibilities/baseline/integration-bin. ! Found source: J0605-3522 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 4.128e+09 3.2e+07 1 3.2e+07 ! 02 2 4.16e+09 3.2e+07 1 3.2e+07 ! 03 3 4.192e+09 3.2e+07 1 3.2e+07 ! 04 4 4.224e+09 3.2e+07 1 3.2e+07 ! 05 5 4.416e+09 3.2e+07 1 3.2e+07 ! 06 6 4.512e+09 3.2e+07 1 3.2e+07 ! 07 7 4.544e+09 3.2e+07 1 3.2e+07 ! 08 8 4.576e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 76 lines of history. ! ! Reading 2648 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: RR, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.3 print "taper_size =", taper_size ! taper_size = 40 ![@/opt64/bin/pima_mupet_01.dfm J0605-3522_C] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.012479Jy sigma=14.795790 ! Fit after self-cal, rms=0.881857Jy sigma=12.809622 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.402 mas, bmaj=8.885 mas, bpa=3.363 degrees ! Estimated noise=1.37898 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0900146 Jy ! Component: 100 - total flux cleaned = 0.111662 Jy ! Total flux subtracted in 100 components = 0.111662 Jy ! Clean residual min=-0.008354 max=0.009350 Jy/beam ! Clean residual mean=-0.000079 rms=0.002464 Jy/beam ! Combined flux in latest and established models = 0.111662 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.111662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.062896Jy sigma=0.758144 ! Fit after self-cal, rms=0.062835Jy sigma=0.757677 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.746 mas, bmaj=9.649 mas, bpa=2.46 degrees ! Estimated noise=0.990946 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170568 Jy ! Component: 100 - total flux cleaned = 0.0263651 Jy ! Component: 150 - total flux cleaned = 0.0317226 Jy ! Component: 200 - total flux cleaned = 0.0349388 Jy ! Total flux subtracted in 200 components = 0.0349388 Jy ! Clean residual min=-0.004457 max=0.003697 Jy/beam ! Clean residual mean=-0.000008 rms=0.001363 Jy/beam ! Combined flux in latest and established models = 0.146601 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 70 components and 0.146601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.058624Jy sigma=0.668643 ! Fit after self-cal, rms=0.058627Jy sigma=0.668028 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.746 x 9.649 at 2.46 degrees (North through East) ! Clean map min=-0.0044094 max=0.12214 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 HN 1.04 KP 0.96 LA 0.99 ! OV 1.05 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 HN 1.09 KP 0.99 LA 1.05 ! OV 1.03 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 HN 1.12 KP 0.91 LA 1.06 ! OV 0.99 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00 HN 0.97 KP 0.93 LA 1.03 ! OV 1.06 SC 1.04 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 1.00 KP 0.95 LA 1.02 ! OV 1.08 SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 1.00 KP 0.90 LA 1.08 ! OV 1.08 SC 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.05 KP 0.93 LA 1.07 ! OV 1.06 SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 HN 1.03 KP 0.90 LA 1.03 ! OV 1.05 SC 1.03 ! ! ! Fit before self-cal, rms=0.058627Jy sigma=0.668028 ! Fit after self-cal, rms=0.059605Jy sigma=0.653977 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.756 mas, bmaj=9.775 mas, bpa=2.455 degrees ! Estimated noise=0.987077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000219896 Jy ! Component: 100 - total flux cleaned = -0.000264496 Jy ! Component: 150 - total flux cleaned = -0.000284719 Jy ! Component: 200 - total flux cleaned = -0.000303756 Jy ! Total flux subtracted in 200 components = -0.000303756 Jy ! Clean residual min=-0.003097 max=0.002609 Jy/beam ! Clean residual mean=0.000019 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.146297 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 82 components and 0.146297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.059578Jy sigma=0.653728 ! Fit after self-cal, rms=0.059643Jy sigma=0.653540 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.059643Jy sigma=0.653540 ! Fit after self-cal, rms=0.059939Jy sigma=0.653511 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.756 mas, bmaj=9.798 mas, bpa=2.478 degrees ! Estimated noise=0.987792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000254439 Jy ! Component: 100 - total flux cleaned = -0.000294457 Jy ! Component: 150 - total flux cleaned = -0.000313463 Jy ! Component: 200 - total flux cleaned = -0.000331293 Jy ! Total flux subtracted in 200 components = -0.000331293 Jy ! Clean residual min=-0.002999 max=0.002607 Jy/beam ! Clean residual mean=0.000018 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.145966 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 89 components and 0.145966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.059918Jy sigma=0.653332 ! Fit after self-cal, rms=0.059919Jy sigma=0.653317 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.91567e-05 Jy ! Component: 100 - total flux cleaned = -0.00010608 Jy ! Component: 150 - total flux cleaned = -0.000121824 Jy ! Component: 200 - total flux cleaned = -0.000137189 Jy ! Total flux subtracted in 200 components = -0.000137189 Jy ! Clean residual min=-0.002983 max=0.002595 Jy/beam ! Clean residual mean=0.000017 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.145828 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 95 components and 0.145828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.059907Jy sigma=0.653197 ! Fit after self-cal, rms=0.059908Jy sigma=0.653190 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.059908Jy sigma=0.653190 ! Fit after self-cal, rms=0.060242Jy sigma=0.653153 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.755 mas, bmaj=9.826 mas, bpa=2.509 degrees ! Estimated noise=0.988371 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0001982 Jy ! Component: 100 - total flux cleaned = -0.000231316 Jy ! Component: 150 - total flux cleaned = -0.00024648 Jy ! Component: 200 - total flux cleaned = -0.000261375 Jy ! Total flux subtracted in 200 components = -0.000261375 Jy ! Clean residual min=-0.002905 max=0.002593 Jy/beam ! Clean residual mean=0.000017 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.145567 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 98 components and 0.145567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.060227Jy sigma=0.653044 ! Fit after self-cal, rms=0.060229Jy sigma=0.653035 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.07746e-05 Jy ! Component: 100 - total flux cleaned = -8.43225e-05 Jy ! Component: 150 - total flux cleaned = -9.73981e-05 Jy ! Component: 200 - total flux cleaned = -0.000109836 Jy ! Total flux subtracted in 200 components = -0.000109836 Jy ! Clean residual min=-0.002906 max=0.002583 Jy/beam ! Clean residual mean=0.000017 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.145457 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 99 components and 0.145457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.060220Jy sigma=0.652956 ! Fit after self-cal, rms=0.060221Jy sigma=0.652954 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.060221Jy sigma=0.652954 ! Fit after self-cal, rms=0.060524Jy sigma=0.652929 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.856 mas, bmaj=11.89 mas, bpa=-1.068 degrees ! Estimated noise=1.23259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000350302 Jy ! Component: 100 - total flux cleaned = -0.000431868 Jy ! Component: 150 - total flux cleaned = -0.000502115 Jy ! Component: 200 - total flux cleaned = -0.000563701 Jy ! Total flux subtracted in 200 components = -0.000563701 Jy ! Clean residual min=-0.003092 max=0.002539 Jy/beam ! Clean residual mean=0.000028 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.144894 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 109 components and 0.144894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.060521Jy sigma=0.652969 ! Fit after self-cal, rms=0.060516Jy sigma=0.652957 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.34515e-05 Jy ! Component: 100 - total flux cleaned = -7.45486e-05 Jy ! Component: 150 - total flux cleaned = -0.00010749 Jy ! Component: 200 - total flux cleaned = -0.000138295 Jy ! Total flux subtracted in 200 components = -0.000138295 Jy ! Clean residual min=-0.003028 max=0.002519 Jy/beam ! Clean residual mean=0.000027 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.144755 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 118 components and 0.144755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.060516Jy sigma=0.653017 ! Fit after self-cal, rms=0.060513Jy sigma=0.652994 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.755 mas, bmaj=9.85 mas, bpa=2.536 degrees ! Estimated noise=0.989079 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.755 x 9.85 at 2.536 degrees (North through East) ! Clean map min=-0.0027424 max=0.12248 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.406 mas, bmaj=9.032 mas, bpa=3.421 degrees ! Estimated noise=1.38641 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0903624 Jy ! Component: 100 - total flux cleaned = 0.111382 Jy ! Component: 150 - total flux cleaned = 0.119942 Jy ! Component: 200 - total flux cleaned = 0.126106 Jy ! Total flux subtracted in 200 components = 0.126106 Jy ! Clean residual min=-0.005625 max=0.004590 Jy/beam ! Clean residual mean=-0.000037 rms=0.001490 Jy/beam ! Combined flux in latest and established models = 0.126106 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.126106 Jy ! Inverting map and beam ! Estimated beam: bmin=1.755 mas, bmaj=9.85 mas, bpa=2.536 degrees ! Estimated noise=0.989079 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00887731 Jy ! Component: 100 - total flux cleaned = 0.01372 Jy ! Component: 150 - total flux cleaned = 0.0164277 Jy ! Component: 200 - total flux cleaned = 0.0179539 Jy ! Total flux subtracted in 200 components = 0.0179539 Jy ! Clean residual min=-0.003064 max=0.002536 Jy/beam ! Clean residual mean=0.000007 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.14406 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 66 components and 0.14406 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.856 mas, bmaj=11.89 mas, bpa=-1.068 degrees ! Estimated noise=1.23259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114356 Jy ! Component: 100 - total flux cleaned = 0.00116598 Jy ! Component: 150 - total flux cleaned = 0.00116794 Jy ! Component: 200 - total flux cleaned = 0.0011392 Jy ! Total flux subtracted in 200 components = 0.0011392 Jy ! Clean residual min=-0.003141 max=0.002612 Jy/beam ! Clean residual mean=0.000028 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.145199 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.66306e-05 Jy ! Component: 100 - total flux cleaned = -3.90565e-05 Jy ! Component: 150 - total flux cleaned = -6.27981e-05 Jy ! Component: 200 - total flux cleaned = -8.49871e-05 Jy ! Total flux subtracted in 200 components = -8.49871e-05 Jy ! Clean residual min=-0.003087 max=0.002588 Jy/beam ! Clean residual mean=0.000028 rms=0.000858 Jy/beam ! Combined flux in latest and established models = 0.145114 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 70 components and 0.145114 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.755 mas, bmaj=9.85 mas, bpa=2.536 degrees ! Estimated noise=0.989079 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.71545e-06 Jy ! Component: 100 - total flux cleaned = -1.31485e-05 Jy ! Component: 150 - total flux cleaned = 5.10197e-06 Jy ! Component: 200 - total flux cleaned = 6.23138e-06 Jy ! Total flux subtracted in 200 components = 6.23138e-06 Jy ! Clean residual min=-0.002896 max=0.002590 Jy/beam ! Clean residual mean=0.000015 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.14512 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 80 components and 0.14512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.060517Jy sigma=0.653180 ! Fit after self-cal, rms=0.060513Jy sigma=0.653154 wmodel J0605-3522_C_map.mod ! Writing 80 model components to file: J0605-3522_C_map.mod wobs J0605-3522_C_uvs.fits ! Writing UV FITS file: J0605-3522_C_uvs.fits wwins J0605-3522_C_map.win ! wwins: Wrote 1 windows to J0605-3522_C_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000699073 Jy ! Component: 100 - total flux cleaned = -0.000475008 Jy ! Component: 150 - total flux cleaned = -0.000313149 Jy ! Component: 200 - total flux cleaned = -0.000238893 Jy ! Component: 250 - total flux cleaned = -0.000132325 Jy ! Component: 300 - total flux cleaned = 0.000138823 Jy ! Component: 350 - total flux cleaned = 0.000237299 Jy ! Component: 400 - total flux cleaned = 0.000364316 Jy ! Component: 450 - total flux cleaned = 0.000487437 Jy ! Component: 500 - total flux cleaned = 0.00060725 Jy ! Component: 550 - total flux cleaned = 0.000723847 Jy ! Component: 600 - total flux cleaned = 0.000837298 Jy ! Component: 650 - total flux cleaned = 0.000974557 Jy ! Component: 700 - total flux cleaned = 0.00102818 Jy ! Component: 750 - total flux cleaned = 0.00113336 Jy ! Component: 800 - total flux cleaned = 0.00118507 Jy ! Component: 850 - total flux cleaned = 0.00123529 Jy ! Component: 900 - total flux cleaned = 0.00123561 Jy ! Component: 950 - total flux cleaned = 0.00135795 Jy ! Component: 1000 - total flux cleaned = 0.00147726 Jy ! Component: 1050 - total flux cleaned = 0.00150031 Jy ! Component: 1100 - total flux cleaned = 0.00147739 Jy ! Component: 1150 - total flux cleaned = 0.00156878 Jy ! Component: 1200 - total flux cleaned = 0.00156861 Jy ! Component: 1250 - total flux cleaned = 0.00165723 Jy ! Component: 1300 - total flux cleaned = 0.00176668 Jy ! Component: 1350 - total flux cleaned = 0.00189649 Jy ! Component: 1400 - total flux cleaned = 0.00213207 Jy ! Component: 1450 - total flux cleaned = 0.00228044 Jy ! Component: 1500 - total flux cleaned = 0.00249075 Jy ! Component: 1550 - total flux cleaned = 0.00265701 Jy ! Component: 1600 - total flux cleaned = 0.00284271 Jy ! Component: 1650 - total flux cleaned = 0.00296552 Jy ! Component: 1700 - total flux cleaned = 0.00314828 Jy ! Component: 1750 - total flux cleaned = 0.00330939 Jy ! Component: 1800 - total flux cleaned = 0.00350909 Jy ! Component: 1850 - total flux cleaned = 0.00368729 Jy ! Component: 1900 - total flux cleaned = 0.00386413 Jy ! Component: 1950 - total flux cleaned = 0.00403975 Jy ! Component: 2000 - total flux cleaned = 0.00421399 Jy ! Component: 2050 - total flux cleaned = 0.00440631 Jy ! Component: 2100 - total flux cleaned = 0.00459737 Jy ! Component: 2150 - total flux cleaned = 0.00476858 Jy ! Component: 2200 - total flux cleaned = 0.00497658 Jy ! Component: 2250 - total flux cleaned = 0.00516481 Jy ! Component: 2300 - total flux cleaned = 0.00535227 Jy ! Component: 2350 - total flux cleaned = 0.00555775 Jy ! Component: 2400 - total flux cleaned = 0.00576245 Jy ! Component: 2450 - total flux cleaned = 0.00598508 Jy ! Component: 2500 - total flux cleaned = 0.00617002 Jy ! Component: 2550 - total flux cleaned = 0.00637295 Jy ! Component: 2600 - total flux cleaned = 0.00659369 Jy ! Component: 2650 - total flux cleaned = 0.00681401 Jy ! Component: 2700 - total flux cleaned = 0.0070156 Jy ! Component: 2750 - total flux cleaned = 0.00721665 Jy ! Component: 2800 - total flux cleaned = 0.00739922 Jy ! Component: 2850 - total flux cleaned = 0.00758151 Jy ! Component: 2900 - total flux cleaned = 0.00778189 Jy ! Component: 2950 - total flux cleaned = 0.00796382 Jy ! Component: 3000 - total flux cleaned = 0.00814581 Jy ! Component: 3050 - total flux cleaned = 0.00838201 Jy ! Component: 3100 - total flux cleaned = 0.00854548 Jy ! Component: 3150 - total flux cleaned = 0.00874518 Jy ! Component: 3200 - total flux cleaned = 0.00890864 Jy ! Component: 3250 - total flux cleaned = 0.00910832 Jy ! Component: 3300 - total flux cleaned = 0.00928989 Jy ! Component: 3350 - total flux cleaned = 0.00945337 Jy ! Component: 3400 - total flux cleaned = 0.00961688 Jy ! Component: 3450 - total flux cleaned = 0.00978045 Jy ! Component: 3500 - total flux cleaned = 0.00996213 Jy ! Component: 3550 - total flux cleaned = 0.0101439 Jy ! Component: 3600 - total flux cleaned = 0.0102894 Jy ! Component: 3650 - total flux cleaned = 0.0104714 Jy ! Component: 3700 - total flux cleaned = 0.0106355 Jy ! Component: 3750 - total flux cleaned = 0.0107996 Jy ! Component: 3800 - total flux cleaned = 0.0110007 Jy ! Component: 3850 - total flux cleaned = 0.011147 Jy ! Component: 3900 - total flux cleaned = 0.0113301 Jy ! Component: 3950 - total flux cleaned = 0.0114585 Jy ! Component: 4000 - total flux cleaned = 0.0116605 Jy ! Component: 4050 - total flux cleaned = 0.0118077 Jy ! Total flux subtracted in 4096 components = 0.0118998 Jy ! Clean residual min=-0.001155 max=0.001011 Jy/beam ! Clean residual mean=0.000003 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.15702 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 351 components and 0.15702 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap .//J0605-3522_C_20180714_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.755 x 9.85 at 2.536 degrees (North through East) ! Clean map min=-0.0017118 max=0.12243 Jy/beam ! Writing clean map to FITS file: .//J0605-3522_C_20180714_map.fits wmodel .//J0605-3522_C_20180714_map.mod ! Writing 351 model components to file: .//J0605-3522_C_20180714_map.mod wobs .//J0605-3522_C_20180714_uvs.fits ! Writing UV FITS file: .//J0605-3522_C_20180714_uvs.fits wwins .//J0605-3522_C_20180714_map.win ! wwins: Wrote 2 windows to .//J0605-3522_C_20180714_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.122426 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000303643 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.744062 0.744062 1.48812 2.97625 5.9525 11.905 23.81 47.62 95.24 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.122 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 403.192 quit ! Quitting program ! Log file .//J0605-3522_C_20180714_dfm.log closed on Sat Jul 28 19:19:17 2018