! Started logfile: /scr/pima/bs262a7_uvs/J0256-0119_C_dfm.log on Thu Jun 14 00:34:24 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.3000
float taper_size
taper_size =   40.0
float freq
freq       =    4.12800
obs     /scr/pima/bs262a7_uvs/J0256-0119_C_uva.fits
! Reading UV FITS file: /scr/pima/bs262a7_uvs/J0256-0119_C_uva.fits
! AN table 1: 21 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.579365 visibilities/baseline/integration-bin.
! Found source: J0256-0119
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 76 lines of history.
! 
! Reading 584 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 8 channels.
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/opt64/bin/pima_mupet_01.dfm J0256-0119_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001245Jy  sigma=27.476038
! Fit after  self-cal, rms=0.981413Jy  sigma=27.432648
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.33 mas, bmaj=19.5 mas, bpa=-26.59 degrees
! Estimated noise=1.28231 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013987 Jy
! Component: 100  -  total flux cleaned = 0.0151415 Jy
! Total flux subtracted in 100 components = 0.0151415 Jy
! Clean residual min=-0.001907 max=0.001909 Jy/beam
! Clean residual mean=-0.000005 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.0151415 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0151415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024735Jy  sigma=0.620021
! Fit after  self-cal, rms=0.023152Jy  sigma=0.576145
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.723 mas, bmaj=18.41 mas, bpa=-26.6 degrees
! Estimated noise=1.16244 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000100053 Jy
! Component: 100  -  total flux cleaned = -0.000378653 Jy
! Component: 150  -  total flux cleaned = -3.28198e-06 Jy
! Component: 200  -  total flux cleaned = 0.00100016 Jy
! Total flux subtracted in 200 components = 0.00100016 Jy
! Clean residual min=-0.001064 max=0.001078 Jy/beam
! Clean residual mean=-0.000007 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.0161416 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 76 components and 0.0161416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022174Jy  sigma=0.550168
! Fit after  self-cal, rms=0.022002Jy  sigma=0.546060
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.723 x 18.41 at -26.6 degrees (North through East)
! Clean map  min=-0.0034874  max=0.017948 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     KP        0.91     NL        0.89     PT        0.86     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.06     KP        1.19     NL        1.52     PT        0.61     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.88     KP        0.95     NL        0.93     PT        1.15     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.13     KP        0.90     NL        0.91     PT        0.91     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.27     KP        0.87     NL        0.93     PT        1.02     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.98     KP        1.05     NL        1.01     PT        1.04     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.92     KP        1.10     NL        0.92     PT        1.00     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.79     KP        1.13     NL        1.08     PT        1.13     
! 
! 
! Fit before self-cal, rms=0.022002Jy  sigma=0.546060
! Fit after  self-cal, rms=0.021716Jy  sigma=0.541387
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.751 mas, bmaj=18.46 mas, bpa=-26.49 degrees
! Estimated noise=1.13408 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000827348 Jy
! Component: 100  -  total flux cleaned = 0.00105537 Jy
! Component: 150  -  total flux cleaned = 0.00138774 Jy
! Component: 200  -  total flux cleaned = 0.00163203 Jy
! Total flux subtracted in 200 components = 0.00163203 Jy
! Clean residual min=-0.000428 max=0.000430 Jy/beam
! Clean residual mean=-0.000001 rms=0.000153 Jy/beam
! Combined flux in latest and established models = 0.0177737 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 123 components and 0.0177737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021563Jy  sigma=0.536477
! Fit after  self-cal, rms=0.022069Jy  sigma=0.531253
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022069Jy  sigma=0.531253
! Fit after  self-cal, rms=0.032921Jy  sigma=0.528286
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.777 mas, bmaj=18.28 mas, bpa=-26.48 degrees
! Estimated noise=1.14382 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000475425 Jy
! Component: 100  -  total flux cleaned = 0.000509081 Jy
! Component: 150  -  total flux cleaned = 0.00031051 Jy
! Component: 200  -  total flux cleaned = 0.000244115 Jy
! Total flux subtracted in 200 components = 0.000244115 Jy
! Clean residual min=-0.000353 max=0.000349 Jy/beam
! Clean residual mean=-0.000001 rms=0.000133 Jy/beam
! Combined flux in latest and established models = 0.0180178 Jy
selfcal
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 177 components and 0.0180178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032790Jy  sigma=0.526425
! Fit after  self-cal, rms=0.033543Jy  sigma=0.524451
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000145336 Jy
! Component: 100  -  total flux cleaned = -0.000189654 Jy
! Component: 150  -  total flux cleaned = -0.000210952 Jy
! Component: 200  -  total flux cleaned = -0.000228541 Jy
! Total flux subtracted in 200 components = -0.000228541 Jy
! Clean residual min=-0.000279 max=0.000275 Jy/beam
! Clean residual mean=-0.000000 rms=0.000109 Jy/beam
! Combined flux in latest and established models = 0.0177892 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 235 components and 0.0177892 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033466Jy  sigma=0.523638
! Fit after  self-cal, rms=0.033511Jy  sigma=0.523357
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033511Jy  sigma=0.523357
! Fit after  self-cal, rms=0.061904Jy  sigma=0.522168
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.779 mas, bmaj=18.19 mas, bpa=-26.52 degrees
! Estimated noise=1.13814 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000300656 Jy
! Component: 100  -  total flux cleaned = 0.000439224 Jy
! Component: 150  -  total flux cleaned = 0.000528822 Jy
! Component: 200  -  total flux cleaned = 0.000512548 Jy
! Total flux subtracted in 200 components = 0.000512548 Jy
! Clean residual min=-0.000257 max=0.000260 Jy/beam
! Clean residual mean=0.000000 rms=0.000103 Jy/beam
! Combined flux in latest and established models = 0.0183018 Jy
selfcal
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 299 components and 0.0183018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.061842Jy  sigma=0.521563
! Fit after  self-cal, rms=0.062116Jy  sigma=0.521181
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000132389 Jy
! Component: 100  -  total flux cleaned = -2.19831e-05 Jy
! Component: 150  -  total flux cleaned = -5.92804e-06 Jy
! Component: 200  -  total flux cleaned = -1.91233e-05 Jy
! Total flux subtracted in 200 components = -1.91233e-05 Jy
! Clean residual min=-0.000212 max=0.000209 Jy/beam
! Clean residual mean=0.000000 rms=0.000091 Jy/beam
! Combined flux in latest and established models = 0.0182827 Jy
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 365 components and 0.0182827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.062066Jy  sigma=0.520905
! Fit after  self-cal, rms=0.062086Jy  sigma=0.520815
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.062086Jy  sigma=0.520815
! Fit after  self-cal, rms=0.097032Jy  sigma=0.520147
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.275 mas, bmaj=17.08 mas, bpa=-26.32 degrees
! Estimated noise=1.17193 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144531 Jy
! Component: 100  -  total flux cleaned = 0.000286155 Jy
! Component: 150  -  total flux cleaned = 0.000418457 Jy
! Component: 200  -  total flux cleaned = 0.000517392 Jy
! Total flux subtracted in 200 components = 0.000517392 Jy
! Clean residual min=-0.000235 max=0.000234 Jy/beam
! Clean residual mean=0.000001 rms=0.000091 Jy/beam
! Combined flux in latest and established models = 0.0188001 Jy
selfcal
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 413 components and 0.0188001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096971Jy  sigma=0.519945
! Fit after  self-cal, rms=0.097051Jy  sigma=0.519828
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.94659e-06 Jy
! Component: 100  -  total flux cleaned = 6.6274e-05 Jy
! Component: 150  -  total flux cleaned = 4.47844e-05 Jy
! Component: 200  -  total flux cleaned = 1.3165e-05 Jy
! Total flux subtracted in 200 components = 1.3165e-05 Jy
! Clean residual min=-0.000167 max=0.000167 Jy/beam
! Clean residual mean=0.000000 rms=0.000067 Jy/beam
! Combined flux in latest and established models = 0.0188132 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 465 components and 0.0188132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.097014Jy  sigma=0.519710
! Fit after  self-cal, rms=0.097030Jy  sigma=0.519647
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.771 mas, bmaj=18.12 mas, bpa=-26.6 degrees
! Estimated noise=1.12523 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.771 x 18.12 at -26.6 degrees (North through East)
! Clean map  min=-0.0028597  max=0.017282 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.399 mas, bmaj=18.83 mas, bpa=-26.71 degrees
! Estimated noise=1.21716 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102887 Jy
! Component: 100  -  total flux cleaned = 0.00880066 Jy
! Component: 150  -  total flux cleaned = 0.00929506 Jy
! Component: 200  -  total flux cleaned = 0.00994231 Jy
! Total flux subtracted in 200 components = 0.00994231 Jy
! Clean residual min=-0.001654 max=0.001650 Jy/beam
! Clean residual mean=-0.000004 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.00994231 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 51 model components to the UV plane model.
! The established model now contains 51 components and 0.00994231 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.771 mas, bmaj=18.12 mas, bpa=-26.6 degrees
! Estimated noise=1.12523 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000108579 Jy
! Component: 100  -  total flux cleaned = 0.000729939 Jy
! Component: 150  -  total flux cleaned = 0.00145346 Jy
! Component: 200  -  total flux cleaned = 0.00215418 Jy
! Total flux subtracted in 200 components = 0.00215418 Jy
! Clean residual min=-0.000699 max=0.000706 Jy/beam
! Clean residual mean=-0.000002 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.0120965 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 106 components and 0.0120965 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.275 mas, bmaj=17.08 mas, bpa=-26.32 degrees
! Estimated noise=1.17193 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000175587 Jy
! Component: 100  -  total flux cleaned = -0.000123481 Jy
! Component: 150  -  total flux cleaned = -0.000144262 Jy
! Component: 200  -  total flux cleaned = -0.000207772 Jy
! Total flux subtracted in 200 components = -0.000207772 Jy
! Clean residual min=-0.000343 max=0.000341 Jy/beam
! Clean residual mean=-0.000001 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.0118887 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000100963 Jy
! Component: 100  -  total flux cleaned = -0.000296764 Jy
! Component: 150  -  total flux cleaned = -0.000488849 Jy
! Component: 200  -  total flux cleaned = -0.000622422 Jy
! Total flux subtracted in 200 components = -0.000622422 Jy
! Clean residual min=-0.000314 max=0.000314 Jy/beam
! Clean residual mean=-0.000001 rms=0.000118 Jy/beam
! Combined flux in latest and established models = 0.0112663 Jy
! Adding 98 model components to the UV plane model.
! The established model now contains 201 components and 0.0112663 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.771 mas, bmaj=18.12 mas, bpa=-26.6 degrees
! Estimated noise=1.12523 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000224648 Jy
! Component: 100  -  total flux cleaned = -0.000158913 Jy
! Component: 150  -  total flux cleaned = -0.000128805 Jy
! Component: 200  -  total flux cleaned = -0.000142655 Jy
! Total flux subtracted in 200 components = -0.000142655 Jy
! Clean residual min=-0.000235 max=0.000237 Jy/beam
! Clean residual mean=-0.000000 rms=0.000093 Jy/beam
! Combined flux in latest and established models = 0.0111236 Jy
selfcal
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 245 components and 0.0111236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096995Jy  sigma=0.520077
! Fit after  self-cal, rms=0.097015Jy  sigma=0.519876
wmodel J0256-0119_C_map.mod
! Writing 245 model components to file: J0256-0119_C_map.mod
wobs   J0256-0119_C_uvs.fits
! Writing UV FITS file: J0256-0119_C_uvs.fits
wwins  J0256-0119_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /scr/pima/bs262a7_uvs/J0256-0119_C_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.771 x 18.12 at -26.6 degrees (North through East)
! Clean map  min=-0.0042931  max=0.014159 Jy/beam
! Writing clean map to FITS file: /scr/pima/bs262a7_uvs/J0256-0119_C_map.fits
wmodel /scr/pima/bs262a7_uvs/J0256-0119_C_map.mod
! Writing 245 model components to file: /scr/pima/bs262a7_uvs/J0256-0119_C_map.mod
wobs   /scr/pima/bs262a7_uvs/J0256-0119_C_uvs.fits
! Writing UV FITS file: /scr/pima/bs262a7_uvs/J0256-0119_C_uvs.fits
wwins  /scr/pima/bs262a7_uvs/J0256-0119_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0141593 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000119587 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.53375 2.53375 5.06749 10.135 20.27 40.54 81.0799
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.014 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  118.401 
quit
! Quitting program
! Log file /scr/pima/bs262a7_uvs/J0256-0119_C_dfm.log closed on Thu Jun 14 00:34:27 2018