! Started logfile: /scr/pima/bs241f_uvs/J2325-1641_X_uvs.log on Wed Jul  8 16:53:18 2015
obs /scr/pima/bs241f_uvs/J2325-1641_X_uva.fits
! Reading UV FITS file: /scr/pima/bs241f_uvs/J2325-1641_X_uva.fits
! AN table 1: 16 integrations on 36 of 36 possible baselines.
! AN table 2: 30 integrations on 45 of 45 possible baselines.
! AN table 3: 22 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.838852 visibilities/baseline/integration-bin.
! Found source: J2325-1641
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 0 lines of history.
! 
! Reading 18240 visibilities.
select RR
! Polarization RR is unavailable.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bs241f_uvs/J2325-1641_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 26 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 26 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 26 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 26 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 26 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 26 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 26 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
!  A total of 26 telescope corrections were flagged in sub-array 2.
!  A total of 22 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.002323Jy  sigma=27.713830
! Fit after  self-cal, rms=0.948784Jy  sigma=26.291391
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7511 mas, bmaj=1.954 mas, bpa=0.6006 degrees
! Estimated noise=0.315978 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0392715 Jy
! Component: 100  -  total flux cleaned = 0.0479632 Jy
! Total flux subtracted in 100 components = 0.0479632 Jy
! Clean residual min=-0.001444 max=0.002838 Jy/beam
! Clean residual mean=0.000002 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.0479632 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0479632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032924Jy  sigma=0.714830
! Fit after  self-cal, rms=0.032164Jy  sigma=0.692799
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00308852 Jy
! Component: 100  -  total flux cleaned = 0.00442528 Jy
! Total flux subtracted in 100 components = 0.00442528 Jy
! Clean residual min=-0.001408 max=0.001344 Jy/beam
! Clean residual mean=-0.000000 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.0523885 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0523885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031792Jy  sigma=0.684898
! Fit after  self-cal, rms=0.031791Jy  sigma=0.684798
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.028 mas, bmaj=2.557 mas, bpa=-0.9308 degrees
! Estimated noise=0.195557 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000558785 Jy
! Component: 100  -  total flux cleaned = 0.000722393 Jy
! Component: 150  -  total flux cleaned = 0.000739361 Jy
! Component: 200  -  total flux cleaned = 0.000739557 Jy
! Total flux subtracted in 200 components = 0.000739557 Jy
! Clean residual min=-0.001072 max=0.001108 Jy/beam
! Clean residual mean=-0.000002 rms=0.000262 Jy/beam
! Combined flux in latest and established models = 0.0531281 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 17 components and 0.0531281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031770Jy  sigma=0.684884
! Fit after  self-cal, rms=0.031769Jy  sigma=0.684870
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.028 x 2.557 at -0.9308 degrees (North through East)
! Clean map  min=-0.0010448  max=0.051321 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.09     HN        0.94     KP        1.00     
!   LA        1.05     NL        1.01     OV        0.88     PT        0.88     
!   SC        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.07     FD        1.07     HN        0.96     KP        1.01     
!   LA        1.12     MK        0.99     NL        0.94     OV        0.93     
!   PT        0.87     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.02     FD        1.15     KP        1.01     LA        1.01     
!   MK        0.91     NL        1.07     OV        0.91     PT        0.90     
!   SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.93     KP        1.12     
!   LA        0.97     NL        0.99     OV        0.90     PT        0.92     
!   SC        0.92     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.02     HN        0.95     KP        1.07     
!   LA        1.07     MK        1.01     NL        1.03     OV        0.94     
!   PT        0.97     SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.01     FD        1.09     KP        1.11     LA        0.92     
!   MK        0.98     NL        1.03     OV        0.94     PT        0.92     
!   SC        1.11     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        1.05     HN        0.90     KP        1.06     
!   LA        0.95     NL        1.01     OV        1.03     PT        0.95     
!   SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.88     FD        0.99     HN        1.02     KP        1.08     
!   LA        1.00     MK        0.99     NL        1.05     OV        0.91     
!   PT        0.93     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.89     FD        0.96     KP        1.11     LA        0.87     
!   MK        0.99     NL        1.02     OV        0.99     PT        0.91     
!   SC        1.16     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.12     HN        0.98     KP        0.94     
!   LA        1.01     NL        1.02     OV        0.90     PT        0.91     
!   SC        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.88     FD        1.10     HN        0.99     KP        0.96     
!   LA        1.08     MK        0.99     NL        1.00     OV        0.98     
!   PT        0.93     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.88     FD        1.10     KP        0.95     LA        1.03     
!   MK        0.94     NL        1.00     OV        0.95     PT        0.96     
!   SC        1.19     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     FD        1.06     HN        0.99     KP        1.17     
!   LA        1.04     MK        1.00     NL        1.06     OV        0.88     
!   PT        0.90     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.02     FD        1.10     KP        1.09     LA        1.01     
!   MK        1.02     NL        1.06     OV        0.87     PT        0.86     
!   SC        1.06     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.07     HN        1.11     KP        1.19     
!   LA        1.03     NL        1.07     OV        0.96     PT        0.89     
!   SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        1.11     HN        1.11     KP        1.18     
!   LA        1.05     MK        1.05     NL        1.02     OV        0.94     
!   PT        0.96     SC        0.94     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.05     FD        1.09     KP        1.17     LA        0.96     
!   MK        1.03     NL        1.03     OV        0.92     PT        0.95     
!   SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        1.06     HN        1.07     KP        1.17     
!   LA        1.05     MK        0.98     NL        0.89     OV        1.05     
!   PT        0.85     SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    FD        1.00*    KP        1.00*    LA        1.00*    
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     FD        1.04     HN        1.01     KP        1.13     
!   LA        0.86     NL        0.93     OV        0.95     PT        0.88     
!   SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        1.04     HN        0.99     KP        1.14     
!   LA        1.00     MK        1.01     NL        0.84     OV        0.96     
!   PT        0.91     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.10     FD        1.02     KP        1.18     LA        0.91     
!   MK        0.99     NL        0.93     OV        0.94     PT        0.93     
!   SC        1.04     
! 
! 
! Fit before self-cal, rms=0.031769Jy  sigma=0.684870
! Fit after  self-cal, rms=0.031130Jy  sigma=0.668902
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.027 mas, bmaj=2.559 mas, bpa=-0.8863 degrees
! Estimated noise=0.19534 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.26037e-05 Jy
! Component: 100  -  total flux cleaned = -1.85869e-07 Jy
! Component: 150  -  total flux cleaned = -1.41434e-05 Jy
! Component: 200  -  total flux cleaned = -1.38842e-05 Jy
! Total flux subtracted in 200 components = -1.38842e-05 Jy
! Clean residual min=-0.000644 max=0.000621 Jy/beam
! Clean residual mean=0.000000 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.0531142 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 23 components and 0.0531142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031128Jy  sigma=0.668845
! Fit after  self-cal, rms=0.031125Jy  sigma=0.668629
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031125Jy  sigma=0.668629
! Fit after  self-cal, rms=0.031125Jy  sigma=0.668618
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.027 mas, bmaj=2.56 mas, bpa=-0.826 degrees
! Estimated noise=0.195346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.58011e-05 Jy
! Component: 100  -  total flux cleaned = 8.16177e-06 Jy
! Component: 150  -  total flux cleaned = -2.8717e-06 Jy
! Component: 200  -  total flux cleaned = -2.98507e-06 Jy
! Total flux subtracted in 200 components = -2.98507e-06 Jy
! Clean residual min=-0.000639 max=0.000620 Jy/beam
! Clean residual mean=0.000000 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0531112 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 26 components and 0.0531112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031124Jy  sigma=0.668584
! Fit after  self-cal, rms=0.031124Jy  sigma=0.668581
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.47321e-06 Jy
! Component: 100  -  total flux cleaned = 4.80404e-07 Jy
! Component: 150  -  total flux cleaned = -2.22557e-06 Jy
! Component: 200  -  total flux cleaned = -4.71639e-06 Jy
! Total flux subtracted in 200 components = -4.71639e-06 Jy
! Clean residual min=-0.000640 max=0.000619 Jy/beam
! Clean residual mean=0.000000 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0531065 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 29 components and 0.0531065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031123Jy  sigma=0.668568
! Fit after  self-cal, rms=0.031123Jy  sigma=0.668566
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031123Jy  sigma=0.668566
! Fit after  self-cal, rms=0.031276Jy  sigma=0.667231
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.027 mas, bmaj=2.563 mas, bpa=-0.7666 degrees
! Estimated noise=0.195409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.1497e-05 Jy
! Component: 100  -  total flux cleaned = -3.91633e-06 Jy
! Component: 150  -  total flux cleaned = -1.39297e-05 Jy
! Component: 200  -  total flux cleaned = -1.40328e-05 Jy
! Total flux subtracted in 200 components = -1.40328e-05 Jy
! Clean residual min=-0.000633 max=0.000605 Jy/beam
! Clean residual mean=-0.000000 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.0530925 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 31 components and 0.0530925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031276Jy  sigma=0.667204
! Fit after  self-cal, rms=0.031280Jy  sigma=0.667187
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.80333e-06 Jy
! Component: 100  -  total flux cleaned = 1.8524e-06 Jy
! Component: 150  -  total flux cleaned = 1.654e-06 Jy
! Component: 200  -  total flux cleaned = 1.6365e-06 Jy
! Total flux subtracted in 200 components = 1.6365e-06 Jy
! Clean residual min=-0.000631 max=0.000606 Jy/beam
! Clean residual mean=-0.000000 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.0530941 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 35 components and 0.0530941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031279Jy  sigma=0.667175
! Fit after  self-cal, rms=0.031279Jy  sigma=0.667176
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031279Jy  sigma=0.667176
! Fit after  self-cal, rms=0.031280Jy  sigma=0.667169
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.375 mas, bmaj=4.582 mas, bpa=3.741 degrees
! Estimated noise=0.235014 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.91719e-05 Jy
! Component: 100  -  total flux cleaned = 1.50613e-05 Jy
! Component: 150  -  total flux cleaned = 1.20115e-05 Jy
! Component: 200  -  total flux cleaned = 9.72976e-06 Jy
! Total flux subtracted in 200 components = 9.72976e-06 Jy
! Clean residual min=-0.000603 max=0.000766 Jy/beam
! Clean residual mean=-0.000001 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.0531038 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 39 components and 0.0531038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031280Jy  sigma=0.667170
! Fit after  self-cal, rms=0.031280Jy  sigma=0.667169
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.16163e-05 Jy
! Component: 100  -  total flux cleaned = 8.93868e-06 Jy
! Component: 150  -  total flux cleaned = 7.07084e-06 Jy
! Component: 200  -  total flux cleaned = 6.30371e-06 Jy
! Total flux subtracted in 200 components = 6.30371e-06 Jy
! Clean residual min=-0.000600 max=0.000764 Jy/beam
! Clean residual mean=-0.000001 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.0531101 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 42 components and 0.0531101 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031280Jy  sigma=0.667175
! Fit after  self-cal, rms=0.031280Jy  sigma=0.667173
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.027 mas, bmaj=2.564 mas, bpa=-0.7159 degrees
! Estimated noise=0.195419 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.027 x 2.564 at -0.7159 degrees (North through East)
! Clean map  min=-0.00058548  max=0.051233 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7509 mas, bmaj=1.963 mas, bpa=0.7588 degrees
! Estimated noise=0.314973 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0395117 Jy
! Component: 100  -  total flux cleaned = 0.0482771 Jy
! Component: 150  -  total flux cleaned = 0.0512389 Jy
! Component: 200  -  total flux cleaned = 0.052545 Jy
! Total flux subtracted in 200 components = 0.052545 Jy
! Clean residual min=-0.001055 max=0.001097 Jy/beam
! Clean residual mean=-0.000000 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.052545 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.052545 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.027 mas, bmaj=2.564 mas, bpa=-0.7159 degrees
! Estimated noise=0.195419 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000442016 Jy
! Component: 100  -  total flux cleaned = 0.000476749 Jy
! Component: 150  -  total flux cleaned = 0.000519068 Jy
! Component: 200  -  total flux cleaned = 0.000519198 Jy
! Total flux subtracted in 200 components = 0.000519198 Jy
! Clean residual min=-0.000635 max=0.000599 Jy/beam
! Clean residual mean=-0.000000 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.0530642 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 19 components and 0.0530642 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.375 mas, bmaj=4.582 mas, bpa=3.741 degrees
! Estimated noise=0.235014 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.19902e-05 Jy
! Component: 100  -  total flux cleaned = 7.96939e-05 Jy
! Component: 150  -  total flux cleaned = 7.61814e-05 Jy
! Component: 200  -  total flux cleaned = 7.45822e-05 Jy
! Total flux subtracted in 200 components = 7.45822e-05 Jy
! Clean residual min=-0.000597 max=0.000761 Jy/beam
! Clean residual mean=-0.000001 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.0531388 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.80645e-06 Jy
! Component: 100  -  total flux cleaned = -4.13642e-06 Jy
! Component: 150  -  total flux cleaned = -5.31273e-06 Jy
! Component: 200  -  total flux cleaned = -6.39954e-06 Jy
! Total flux subtracted in 200 components = -6.39954e-06 Jy
! Clean residual min=-0.000597 max=0.000763 Jy/beam
! Clean residual mean=-0.000001 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.0531324 Jy
! Adding 7 model components to the UV plane model.
! The established model now contains 23 components and 0.0531324 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.027 mas, bmaj=2.564 mas, bpa=-0.7159 degrees
! Estimated noise=0.195419 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.4727e-05 Jy
! Component: 100  -  total flux cleaned = -3.44687e-05 Jy
! Component: 150  -  total flux cleaned = -3.43598e-05 Jy
! Component: 200  -  total flux cleaned = -3.40928e-05 Jy
! Total flux subtracted in 200 components = -3.40928e-05 Jy
! Clean residual min=-0.000637 max=0.000603 Jy/beam
! Clean residual mean=-0.000000 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.0530983 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 27 components and 0.0530983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031281Jy  sigma=0.667206
! Fit after  self-cal, rms=0.031280Jy  sigma=0.667202
wmodel /scr/pima/bs241f_uvs/J2325-1641_X_map.mod
! Writing 27 model components to file: /scr/pima/bs241f_uvs/J2325-1641_X_map.mod
wobs /scr/pima/bs241f_uvs/J2325-1641_X_uvs.fits
! Writing UV FITS file: /scr/pima/bs241f_uvs/J2325-1641_X_uvs.fits
wwins /scr/pima/bs241f_uvs/J2325-1641_X_map.win
! wwins: Wrote 1 windows to /scr/pima/bs241f_uvs/J2325-1641_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -1.42888e-05 Jy
! Component: 100  -  total flux cleaned = 1.78131e-05 Jy
! Component: 150  -  total flux cleaned = 1.77527e-05 Jy
! Component: 200  -  total flux cleaned = -4.19655e-05 Jy
! Component: 250  -  total flux cleaned = -9.03085e-05 Jy
! Component: 300  -  total flux cleaned = -0.000128209 Jy
! Component: 350  -  total flux cleaned = -0.000212046 Jy
! Component: 400  -  total flux cleaned = -0.000303507 Jy
! Component: 450  -  total flux cleaned = -0.000357681 Jy
! Component: 500  -  total flux cleaned = -0.000455617 Jy
! Component: 550  -  total flux cleaned = -0.000525814 Jy
! Component: 600  -  total flux cleaned = -0.000603892 Jy
! Component: 650  -  total flux cleaned = -0.000672326 Jy
! Component: 700  -  total flux cleaned = -0.000706038 Jy
! Component: 750  -  total flux cleaned = -0.000756318 Jy
! Component: 800  -  total flux cleaned = -0.000806092 Jy
! Component: 850  -  total flux cleaned = -0.000871771 Jy
! Component: 900  -  total flux cleaned = -0.000896181 Jy
! Component: 950  -  total flux cleaned = -0.000984646 Jy
! Component: 1000  -  total flux cleaned = -0.00100053 Jy
! Component: 1050  -  total flux cleaned = -0.00104005 Jy
! Component: 1100  -  total flux cleaned = -0.00105579 Jy
! Component: 1150  -  total flux cleaned = -0.00111008 Jy
! Component: 1200  -  total flux cleaned = -0.00114856 Jy
! Component: 1250  -  total flux cleaned = -0.00116387 Jy
! Component: 1300  -  total flux cleaned = -0.00120933 Jy
! Component: 1350  -  total flux cleaned = -0.00120937 Jy
! Component: 1400  -  total flux cleaned = -0.00125417 Jy
! Component: 1450  -  total flux cleaned = -0.0012913 Jy
! Component: 1500  -  total flux cleaned = -0.00129873 Jy
! Component: 1550  -  total flux cleaned = -0.00133528 Jy
! Component: 1600  -  total flux cleaned = -0.00132809 Jy
! Component: 1650  -  total flux cleaned = -0.0013354 Jy
! Component: 1700  -  total flux cleaned = -0.00137133 Jy
! Component: 1750  -  total flux cleaned = -0.00140697 Jy
! Component: 1800  -  total flux cleaned = -0.00144939 Jy
! Component: 1850  -  total flux cleaned = -0.00145638 Jy
! Component: 1900  -  total flux cleaned = -0.00147039 Jy
! Component: 1950  -  total flux cleaned = -0.00148436 Jy
! Component: 2000  -  total flux cleaned = -0.00149127 Jy
! Component: 2050  -  total flux cleaned = -0.00152562 Jy
! Component: 2100  -  total flux cleaned = -0.00153927 Jy
! Component: 2150  -  total flux cleaned = -0.00152573 Jy
! Component: 2200  -  total flux cleaned = -0.00153248 Jy
! Component: 2250  -  total flux cleaned = -0.00155261 Jy
! Component: 2300  -  total flux cleaned = -0.00158592 Jy
! Component: 2350  -  total flux cleaned = -0.00159256 Jy
! Component: 2400  -  total flux cleaned = -0.00160572 Jy
! Component: 2450  -  total flux cleaned = -0.00158597 Jy
! Component: 2500  -  total flux cleaned = -0.00159904 Jy
! Component: 2550  -  total flux cleaned = -0.00164452 Jy
! Component: 2600  -  total flux cleaned = -0.00160574 Jy
! Component: 2650  -  total flux cleaned = -0.00164425 Jy
! Component: 2700  -  total flux cleaned = -0.00166984 Jy
! Component: 2750  -  total flux cleaned = -0.00166344 Jy
! Component: 2800  -  total flux cleaned = -0.00165082 Jy
! Component: 2850  -  total flux cleaned = -0.00166346 Jy
! Component: 2900  -  total flux cleaned = -0.00165716 Jy
! Component: 2950  -  total flux cleaned = -0.0016759 Jy
! Component: 3000  -  total flux cleaned = -0.00164484 Jy
! Component: 3050  -  total flux cleaned = -0.00164486 Jy
! Component: 3100  -  total flux cleaned = -0.00165713 Jy
! Component: 3150  -  total flux cleaned = -0.00163266 Jy
! Component: 3200  -  total flux cleaned = -0.00163264 Jy
! Component: 3250  -  total flux cleaned = -0.0016326 Jy
! Component: 3300  -  total flux cleaned = -0.00163867 Jy
! Component: 3350  -  total flux cleaned = -0.00162063 Jy
! Component: 3400  -  total flux cleaned = -0.00162664 Jy
! Component: 3450  -  total flux cleaned = -0.00160281 Jy
! Component: 3500  -  total flux cleaned = -0.00163244 Jy
! Component: 3550  -  total flux cleaned = -0.00159699 Jy
! Component: 3600  -  total flux cleaned = -0.00160877 Jy
! Component: 3650  -  total flux cleaned = -0.00162045 Jy
! Component: 3700  -  total flux cleaned = -0.00161462 Jy
! Component: 3750  -  total flux cleaned = -0.0016088 Jy
! Component: 3800  -  total flux cleaned = -0.00158563 Jy
! Component: 3850  -  total flux cleaned = -0.00157985 Jy
! Component: 3900  -  total flux cleaned = -0.00159702 Jy
! Component: 3950  -  total flux cleaned = -0.00157985 Jy
! Component: 4000  -  total flux cleaned = -0.00157416 Jy
! Component: 4050  -  total flux cleaned = -0.00157979 Jy
! Total flux subtracted in 4096 components = -0.00156848 Jy
! Clean residual min=-0.000355 max=0.000420 Jy/beam
! Clean residual mean=0.000000 rms=0.000101 Jy/beam
! Combined flux in latest and established models = 0.0515298 Jy
keep
! Adding 301 model components to the UV plane model.
! The established model now contains 328 components and 0.0515298 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bs241f_uvs/J2325-1641_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.027 x 2.564 at -0.7159 degrees (North through East)
! Clean map  min=-0.00052223  max=0.051292 Jy/beam
! Writing clean map to FITS file: /scr/pima/bs241f_uvs/J2325-1641_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0512916 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00010069 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.588925 0.588925 1.17785 2.3557 4.7114 9.4228 18.8456 37.6912 75.3824
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.051 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  509.402 
quit
! Quitting program
! Log file /scr/pima/bs241f_uvs/J2325-1641_X_uvs.log closed on Wed Jul  8 16:53:22 2015