! Started logfile: /scr/pima/bs241f_uvs/J1824+5651_X_uvs.log on Wed Jul  8 16:51:09 2015
obs /scr/pima/bs241f_uvs/J1824+5651_X_uva.fits
! Reading UV FITS file: /scr/pima/bs241f_uvs/J1824+5651_X_uva.fits
! AN table 1: 24 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.757407 visibilities/baseline/integration-bin.
! Found source: J1824+5651
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 0 lines of history.
! 
! Reading 6544 visibilities.
select RR
! Polarization RR is unavailable.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bs241f_uvs/J1824+5651_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.305086Jy  sigma=41.871637
! Fit after  self-cal, rms=0.253553Jy  sigma=7.845831
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7349 mas, bmaj=2.909 mas, bpa=-39.29 degrees
! Estimated noise=0.584248 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.600735 Jy
! Component: 100  -  total flux cleaned = 0.756095 Jy
! Total flux subtracted in 100 components = 0.756095 Jy
! Clean residual min=-0.038485 max=0.067926 Jy/beam
! Clean residual mean=0.000056 rms=0.010719 Jy/beam
! Combined flux in latest and established models = 0.756094 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.756094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.162507Jy  sigma=5.059855
! Fit after  self-cal, rms=0.162453Jy  sigma=5.057343
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0793432 Jy
! Component: 100  -  total flux cleaned = 0.127175 Jy
! Total flux subtracted in 100 components = 0.127175 Jy
! Clean residual min=-0.028660 max=0.039000 Jy/beam
! Clean residual mean=0.000034 rms=0.006661 Jy/beam
! Combined flux in latest and established models = 0.883269 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.883269 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.107605Jy  sigma=3.318259
! Fit after  self-cal, rms=0.105912Jy  sigma=3.282444
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9105 mas, bmaj=2.986 mas, bpa=-40.17 degrees
! Estimated noise=0.279128 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0369638 Jy
! Component: 100  -  total flux cleaned = 0.0566501 Jy
! Component: 150  -  total flux cleaned = 0.0628055 Jy
! Component: 200  -  total flux cleaned = 0.0665633 Jy
! Total flux subtracted in 200 components = 0.0665633 Jy
! Clean residual min=-0.025183 max=0.031714 Jy/beam
! Clean residual mean=0.000047 rms=0.006479 Jy/beam
! Combined flux in latest and established models = 0.949833 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 34 components and 0.949833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090551Jy  sigma=2.899120
! Fit after  self-cal, rms=0.089784Jy  sigma=2.882782
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9105 x 2.986 at -40.17 degrees (North through East)
! Clean map  min=-0.024038  max=0.79651 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.06     HN        0.95     KP        1.04     
!   LA        1.01     MK        0.97     NL        0.92     OV        0.91     
!   PT        0.90     SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.94     KP        1.09     
!   LA        0.95     MK        0.98     NL        1.01     OV        0.92     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        1.06     HN        0.93     KP        1.09     
!   LA        0.92     MK        0.99     NL        1.00     OV        0.94     
!   PT        0.95     SC        1.07     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.07     HN        0.99     KP        0.97     
!   LA        0.98     MK        0.99     NL        0.94     OV        0.95     
!   PT        0.94     SC        1.06     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.09     HN        1.00     KP        1.17     
!   LA        0.97     MK        0.99     NL        1.06     OV        0.88     
!   PT        0.92     SC        1.05     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.10     HN        1.08     KP        1.19     
!   LA        1.00     MK        1.00     NL        1.02     OV        0.95     
!   PT        0.95     SC        1.09     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.05     HN        1.02     KP        1.17     
!   LA        0.94     MK        0.99     NL        0.88     OV        0.92     
!   PT        0.89     SC        1.08     
! 
! 
! Fit before self-cal, rms=0.089784Jy  sigma=2.882782
! Fit after  self-cal, rms=0.047151Jy  sigma=1.455441
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9168 mas, bmaj=2.997 mas, bpa=-40.34 degrees
! Estimated noise=0.27754 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.6, -6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0124253 Jy
! Component: 100  -  total flux cleaned = 0.0159312 Jy
! Component: 150  -  total flux cleaned = 0.0186292 Jy
! Component: 200  -  total flux cleaned = 0.0209406 Jy
! Total flux subtracted in 200 components = 0.0209406 Jy
! Clean residual min=-0.006533 max=0.006237 Jy/beam
! Clean residual mean=0.000005 rms=0.001454 Jy/beam
! Combined flux in latest and established models = 0.970773 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 68 components and 0.970773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043828Jy  sigma=1.325853
! Fit after  self-cal, rms=0.043700Jy  sigma=1.322557
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043700Jy  sigma=1.322557
! Fit after  self-cal, rms=0.026866Jy  sigma=0.748053
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9164 mas, bmaj=3.001 mas, bpa=-40.35 degrees
! Estimated noise=0.277383 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00177574 Jy
! Component: 100  -  total flux cleaned = 0.00253179 Jy
! Component: 150  -  total flux cleaned = 0.0029072 Jy
! Component: 200  -  total flux cleaned = 0.00323415 Jy
! Total flux subtracted in 200 components = 0.00323415 Jy
! Clean residual min=-0.002369 max=0.002729 Jy/beam
! Clean residual mean=0.000002 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.974007 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 91 components and 0.974007 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026275Jy  sigma=0.728676
! Fit after  self-cal, rms=0.026210Jy  sigma=0.727496
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-29, -20.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199373 Jy
! Component: 100  -  total flux cleaned = 0.00281055 Jy
! Component: 150  -  total flux cleaned = 0.00341219 Jy
! Component: 200  -  total flux cleaned = 0.00384932 Jy
! Total flux subtracted in 200 components = 0.00384932 Jy
! Clean residual min=-0.002007 max=0.002119 Jy/beam
! Clean residual mean=0.000002 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.977857 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 106 components and 0.977857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025885Jy  sigma=0.717231
! Fit after  self-cal, rms=0.025853Jy  sigma=0.716753
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025853Jy  sigma=0.716753
! Fit after  self-cal, rms=0.025819Jy  sigma=0.715904
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9167 mas, bmaj=3.002 mas, bpa=-40.36 degrees
! Estimated noise=0.277499 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.30314e-05 Jy
! Component: 100  -  total flux cleaned = 0.000475285 Jy
! Component: 150  -  total flux cleaned = 0.000909701 Jy
! Component: 200  -  total flux cleaned = 0.00123261 Jy
! Total flux subtracted in 200 components = 0.00123261 Jy
! Clean residual min=-0.001689 max=0.001864 Jy/beam
! Clean residual mean=0.000002 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.979089 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 122 components and 0.979089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025683Jy  sigma=0.711394
! Fit after  self-cal, rms=0.025659Jy  sigma=0.711098
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144994 Jy
! Component: 100  -  total flux cleaned = 0.000508633 Jy
! Component: 150  -  total flux cleaned = 0.000781527 Jy
! Component: 200  -  total flux cleaned = 0.0010927 Jy
! Total flux subtracted in 200 components = 0.0010927 Jy
! Clean residual min=-0.001569 max=0.001782 Jy/beam
! Clean residual mean=0.000001 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.980182 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 137 components and 0.980182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025585Jy  sigma=0.708627
! Fit after  self-cal, rms=0.025569Jy  sigma=0.708449
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025569Jy  sigma=0.708449
! Fit after  self-cal, rms=0.025557Jy  sigma=0.708284
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.091 mas, bmaj=3.266 mas, bpa=-48.81 degrees
! Estimated noise=0.337738 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000768026 Jy
! Component: 100  -  total flux cleaned = 0.00125465 Jy
! Component: 150  -  total flux cleaned = 0.00168272 Jy
! Component: 200  -  total flux cleaned = 0.00206793 Jy
! Total flux subtracted in 200 components = 0.00206793 Jy
! Clean residual min=-0.002087 max=0.002362 Jy/beam
! Clean residual mean=0.000002 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.98225 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 176 components and 0.98225 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025522Jy  sigma=0.706737
! Fit after  self-cal, rms=0.025515Jy  sigma=0.706652
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000369801 Jy
! Component: 100  -  total flux cleaned = 0.000667123 Jy
! Component: 150  -  total flux cleaned = 0.000937585 Jy
! Component: 200  -  total flux cleaned = 0.00114817 Jy
! Total flux subtracted in 200 components = 0.00114817 Jy
! Clean residual min=-0.002003 max=0.002389 Jy/beam
! Clean residual mean=0.000002 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.983398 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 199 components and 0.983398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025496Jy  sigma=0.705887
! Fit after  self-cal, rms=0.025488Jy  sigma=0.705818
! Inverting map 
! Added new window around map position (21.6, 10.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204822 Jy
! Component: 100  -  total flux cleaned = 0.00292748 Jy
! Component: 150  -  total flux cleaned = 0.00349018 Jy
! Component: 200  -  total flux cleaned = 0.00396702 Jy
! Total flux subtracted in 200 components = 0.00396702 Jy
! Clean residual min=-0.001495 max=0.001408 Jy/beam
! Clean residual mean=0.000003 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.987365 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 230 components and 0.987365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025377Jy  sigma=0.702226
! Fit after  self-cal, rms=0.025360Jy  sigma=0.701785
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9168 mas, bmaj=3.002 mas, bpa=-40.36 degrees
! Estimated noise=0.277519 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9168 x 3.002 at -40.36 degrees (North through East)
! Clean map  min=-0.0082927  max=0.79285 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025360Jy  sigma=0.701785
! Fit after  self-cal, rms=0.023415Jy  sigma=0.653225
! Inverting map and beam 
! Estimated beam: bmin=0.9166 mas, bmaj=3.002 mas, bpa=-40.36 degrees
! Estimated noise=0.277474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000278759 Jy
! Component: 100  -  total flux cleaned = 0.000511409 Jy
! Component: 150  -  total flux cleaned = 0.000754586 Jy
! Component: 200  -  total flux cleaned = 0.00103816 Jy
! Total flux subtracted in 200 components = 0.00103816 Jy
! Clean residual min=-0.001177 max=0.001315 Jy/beam
! Clean residual mean=0.000002 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.988403 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 249 components and 0.988403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023332Jy  sigma=0.650659
! Fit after  self-cal, rms=0.023325Jy  sigma=0.650597
! Inverting map 
! Added new window around map position (-23.6, 25.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000291303 Jy
! Component: 100  -  total flux cleaned = 0.000292532 Jy
! Component: 150  -  total flux cleaned = 0.000482883 Jy
! Component: 200  -  total flux cleaned = 0.000656066 Jy
! Total flux subtracted in 200 components = 0.000656066 Jy
! Clean residual min=-0.001055 max=0.001135 Jy/beam
! Clean residual mean=0.000002 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.989059 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 273 components and 0.989059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023222Jy  sigma=0.647598
! Fit after  self-cal, rms=0.023215Jy  sigma=0.647550
! Inverting map 
! Added new window around map position (4.6, 9.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000597783 Jy
! Component: 100  -  total flux cleaned = 0.000706449 Jy
! Component: 150  -  total flux cleaned = 0.00102089 Jy
! Component: 200  -  total flux cleaned = 0.00119703 Jy
! Total flux subtracted in 200 components = 0.00119703 Jy
! Clean residual min=-0.000969 max=0.000985 Jy/beam
! Clean residual mean=0.000002 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.990256 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 295 components and 0.990256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023148Jy  sigma=0.645241
! Fit after  self-cal, rms=0.023140Jy  sigma=0.645144
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023140Jy  sigma=0.645144
! Fit after  self-cal, rms=0.023131Jy  sigma=0.644919
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7397 mas, bmaj=2.937 mas, bpa=-39.54 degrees
! Estimated noise=0.565446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.592308 Jy
! Component: 100  -  total flux cleaned = 0.744713 Jy
! Component: 150  -  total flux cleaned = 0.823924 Jy
! Component: 200  -  total flux cleaned = 0.871673 Jy
! Total flux subtracted in 200 components = 0.871673 Jy
! Clean residual min=-0.012041 max=0.024762 Jy/beam
! Clean residual mean=0.000018 rms=0.003652 Jy/beam
! Combined flux in latest and established models = 0.871673 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.871673 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9165 mas, bmaj=3.002 mas, bpa=-40.36 degrees
! Estimated noise=0.277463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0384193 Jy
! Component: 100  -  total flux cleaned = 0.0588617 Jy
! Component: 150  -  total flux cleaned = 0.071901 Jy
! Component: 200  -  total flux cleaned = 0.0788502 Jy
! Total flux subtracted in 200 components = 0.0788502 Jy
! Clean residual min=-0.005658 max=0.005629 Jy/beam
! Clean residual mean=0.000009 rms=0.001473 Jy/beam
! Combined flux in latest and established models = 0.950524 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 39 components and 0.950524 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.091 mas, bmaj=3.267 mas, bpa=-48.81 degrees
! Estimated noise=0.337718 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110945 Jy
! Component: 100  -  total flux cleaned = 0.0160125 Jy
! Component: 150  -  total flux cleaned = 0.018106 Jy
! Component: 200  -  total flux cleaned = 0.0202363 Jy
! Total flux subtracted in 200 components = 0.0202363 Jy
! Clean residual min=-0.003817 max=0.003369 Jy/beam
! Clean residual mean=0.000006 rms=0.001078 Jy/beam
! Combined flux in latest and established models = 0.97076 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232287 Jy
! Component: 100  -  total flux cleaned = 0.00431727 Jy
! Component: 150  -  total flux cleaned = 0.00616229 Jy
! Component: 200  -  total flux cleaned = 0.00769929 Jy
! Total flux subtracted in 200 components = 0.00769929 Jy
! Clean residual min=-0.002770 max=0.002261 Jy/beam
! Clean residual mean=0.000004 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 0.978459 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 108 components and 0.978459 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9165 mas, bmaj=3.002 mas, bpa=-40.36 degrees
! Estimated noise=0.277463 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.49561e-05 Jy
! Component: 100  -  total flux cleaned = 0.00100139 Jy
! Component: 150  -  total flux cleaned = 0.00185162 Jy
! Component: 200  -  total flux cleaned = 0.00266639 Jy
! Total flux subtracted in 200 components = 0.00266639 Jy
! Clean residual min=-0.001737 max=0.001820 Jy/beam
! Clean residual mean=0.000002 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.981126 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 132 components and 0.981126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023754Jy  sigma=0.664340
! Fit after  self-cal, rms=0.023648Jy  sigma=0.661667
wmodel /scr/pima/bs241f_uvs/J1824+5651_X_map.mod
! Writing 132 model components to file: /scr/pima/bs241f_uvs/J1824+5651_X_map.mod
wobs /scr/pima/bs241f_uvs/J1824+5651_X_uvs.fits
! Writing UV FITS file: /scr/pima/bs241f_uvs/J1824+5651_X_uvs.fits
wwins /scr/pima/bs241f_uvs/J1824+5651_X_map.win
! wwins: Wrote 6 windows to /scr/pima/bs241f_uvs/J1824+5651_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000176132 Jy
! Component: 100  -  total flux cleaned = -0.000178282 Jy
! Component: 150  -  total flux cleaned = -7.31878e-05 Jy
! Component: 200  -  total flux cleaned = -2.34481e-05 Jy
! Component: 250  -  total flux cleaned = -2.32978e-05 Jy
! Component: 300  -  total flux cleaned = -2.32671e-05 Jy
! Component: 350  -  total flux cleaned = -1.435e-06 Jy
! Component: 400  -  total flux cleaned = 6.19794e-05 Jy
! Component: 450  -  total flux cleaned = 0.000102198 Jy
! Component: 500  -  total flux cleaned = 0.000101938 Jy
! Component: 550  -  total flux cleaned = 0.000120408 Jy
! Component: 600  -  total flux cleaned = 0.00010174 Jy
! Component: 650  -  total flux cleaned = 3.01968e-05 Jy
! Component: 700  -  total flux cleaned = 4.80182e-05 Jy
! Component: 750  -  total flux cleaned = 6.47937e-05 Jy
! Component: 800  -  total flux cleaned = 6.46486e-05 Jy
! Component: 850  -  total flux cleaned = 6.46666e-05 Jy
! Component: 900  -  total flux cleaned = 6.4308e-05 Jy
! Component: 950  -  total flux cleaned = 4.85866e-05 Jy
! Component: 1000  -  total flux cleaned = 4.88136e-05 Jy
! Component: 1050  -  total flux cleaned = 1.92019e-05 Jy
! Component: 1100  -  total flux cleaned = 4.65345e-06 Jy
! Component: 1150  -  total flux cleaned = 5.09839e-06 Jy
! Component: 1200  -  total flux cleaned = -2.24936e-05 Jy
! Component: 1250  -  total flux cleaned = 3.30575e-05 Jy
! Component: 1300  -  total flux cleaned = 6.02594e-05 Jy
! Component: 1350  -  total flux cleaned = 7.31613e-05 Jy
! Component: 1400  -  total flux cleaned = 7.29302e-05 Jy
! Component: 1450  -  total flux cleaned = 6.01911e-05 Jy
! Component: 1500  -  total flux cleaned = 7.26176e-05 Jy
! Component: 1550  -  total flux cleaned = 2.38118e-05 Jy
! Component: 1600  -  total flux cleaned = 3.59467e-05 Jy
! Component: 1650  -  total flux cleaned = 2.43764e-05 Jy
! Component: 1700  -  total flux cleaned = 2.44279e-05 Jy
! Component: 1750  -  total flux cleaned = 2.45413e-05 Jy
! Component: 1800  -  total flux cleaned = 3.57125e-05 Jy
! Component: 1850  -  total flux cleaned = 2.46891e-05 Jy
! Component: 1900  -  total flux cleaned = 3.56913e-05 Jy
! Component: 1950  -  total flux cleaned = 3.65582e-06 Jy
! Component: 2000  -  total flux cleaned = 3.53877e-05 Jy
! Component: 2050  -  total flux cleaned = 2.49053e-05 Jy
! Component: 2100  -  total flux cleaned = 3.51638e-05 Jy
! Component: 2150  -  total flux cleaned = 4.53107e-05 Jy
! Component: 2200  -  total flux cleaned = -2.38381e-05 Jy
! Component: 2250  -  total flux cleaned = 1.51213e-05 Jy
! Component: 2300  -  total flux cleaned = 1.51258e-05 Jy
! Component: 2350  -  total flux cleaned = 2.44904e-05 Jy
! Component: 2400  -  total flux cleaned = 5.6761e-06 Jy
! Component: 2450  -  total flux cleaned = 1.50043e-05 Jy
! Component: 2500  -  total flux cleaned = 5.76302e-06 Jy
! Component: 2550  -  total flux cleaned = 2.37387e-05 Jy
! Component: 2600  -  total flux cleaned = 4.13305e-05 Jy
! Component: 2650  -  total flux cleaned = 4.12889e-05 Jy
! Component: 2700  -  total flux cleaned = 4.99037e-05 Jy
! Component: 2750  -  total flux cleaned = 6.71525e-05 Jy
! Component: 2800  -  total flux cleaned = 6.72414e-05 Jy
! Component: 2850  -  total flux cleaned = 7.55107e-05 Jy
! Component: 2900  -  total flux cleaned = 7.55203e-05 Jy
! Component: 2950  -  total flux cleaned = 7.55178e-05 Jy
! Component: 3000  -  total flux cleaned = 5.11811e-05 Jy
! Component: 3050  -  total flux cleaned = 1.92704e-05 Jy
! Component: 3100  -  total flux cleaned = 1.93561e-05 Jy
! Component: 3150  -  total flux cleaned = -2.74685e-05 Jy
! Component: 3200  -  total flux cleaned = -1.97113e-05 Jy
! Component: 3250  -  total flux cleaned = -4.26626e-05 Jy
! Component: 3300  -  total flux cleaned = -5.0256e-05 Jy
! Component: 3350  -  total flux cleaned = -5.7822e-05 Jy
! Component: 3400  -  total flux cleaned = -8.01745e-05 Jy
! Component: 3450  -  total flux cleaned = -8.74774e-05 Jy
! Component: 3500  -  total flux cleaned = -8.74649e-05 Jy
! Component: 3550  -  total flux cleaned = -7.30575e-05 Jy
! Component: 3600  -  total flux cleaned = -8.7509e-05 Jy
! Component: 3650  -  total flux cleaned = -7.34142e-05 Jy
! Component: 3700  -  total flux cleaned = -8.04885e-05 Jy
! Component: 3750  -  total flux cleaned = -9.45594e-05 Jy
! Component: 3800  -  total flux cleaned = -0.000136032 Jy
! Component: 3850  -  total flux cleaned = -0.000142844 Jy
! Component: 3900  -  total flux cleaned = -0.000142959 Jy
! Component: 3950  -  total flux cleaned = -0.000176806 Jy
! Component: 4000  -  total flux cleaned = -0.000196941 Jy
! Component: 4050  -  total flux cleaned = -0.000216951 Jy
! Total flux subtracted in 4096 components = -0.000236704 Jy
! Clean residual min=-0.000434 max=0.000362 Jy/beam
! Clean residual mean=0.000001 rms=0.000118 Jy/beam
! Combined flux in latest and established models = 0.980889 Jy
keep
! Adding 310 model components to the UV plane model.
! The established model now contains 441 components and 0.980889 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bs241f_uvs/J1824+5651_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9165 x 3.002 at -40.36 degrees (North through East)
! Clean map  min=-0.0068595  max=0.79154 Jy/beam
! Writing clean map to FITS file: /scr/pima/bs241f_uvs/J1824+5651_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.791541 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000113929 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0431801 0.0431801 0.0863601 0.17272 0.34544 0.690881 1.38176 2.76352 5.52705 11.0541 22.1082 44.2164 88.4328
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.791 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  6947.65 
quit
! Quitting program
! Log file /scr/pima/bs241f_uvs/J1824+5651_X_uvs.log closed on Wed Jul  8 16:51:13 2015