! Started logfile: /scr/pima/bs241g_uvs/J1232-0224_X_uvs.log on Mon Jul 27 06:03:05 2015 obs /scr/pima/bs241g_uvs/J1232-0224_X_uva.fits ! Reading UV FITS file: /scr/pima/bs241g_uvs/J1232-0224_X_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.982906 visibilities/baseline/integration-bin. ! Found source: J1232-0224 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): I ! ! Read 0 lines of history. ! ! Reading 3680 visibilities. select RR ! Polarization RR is unavailable. ! Selecting polarization: I, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bs241g_uvs/J1232-0224_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.089905Jy sigma=31.966015 ! Fit after self-cal, rms=0.663402Jy sigma=19.345451 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6975 mas, bmaj=2.154 mas, bpa=-3.898 degrees ! Estimated noise=0.532589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.263598 Jy ! Component: 100 - total flux cleaned = 0.39409 Jy ! Total flux subtracted in 100 components = 0.39409 Jy ! Clean residual min=-0.033835 max=0.062756 Jy/beam ! Clean residual mean=-0.000001 rms=0.009612 Jy/beam ! Combined flux in latest and established models = 0.39409 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.39409 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.167410Jy sigma=4.887353 ! Fit after self-cal, rms=0.163759Jy sigma=4.787020 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0760278 Jy ! Component: 100 - total flux cleaned = 0.11897 Jy ! Total flux subtracted in 100 components = 0.11897 Jy ! Clean residual min=-0.016699 max=0.024420 Jy/beam ! Clean residual mean=-0.000009 rms=0.004837 Jy/beam ! Combined flux in latest and established models = 0.513061 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 10 components and 0.513061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.103289Jy sigma=2.989779 ! Fit after self-cal, rms=0.102961Jy sigma=2.981257 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8448 mas, bmaj=2.483 mas, bpa=-4.087 degrees ! Estimated noise=0.402622 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0394316 Jy ! Component: 100 - total flux cleaned = 0.0593644 Jy ! Component: 150 - total flux cleaned = 0.0709457 Jy ! Component: 200 - total flux cleaned = 0.0778964 Jy ! Total flux subtracted in 200 components = 0.0778964 Jy ! Clean residual min=-0.024641 max=0.029761 Jy/beam ! Clean residual mean=-0.000040 rms=0.006884 Jy/beam ! Combined flux in latest and established models = 0.590957 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 20 components and 0.590957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.087356Jy sigma=2.537657 ! Fit after self-cal, rms=0.087211Jy sigma=2.533504 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8448 x 2.483 at -4.087 degrees (North through East) ! Clean map min=-0.02435 max=0.35705 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 HN 0.96 KP 1.07 LA 0.95 ! MK 1.03 NL 0.92 OV 0.94 PT 0.92 ! SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 0.95 KP 1.13 LA 0.90 ! MK 1.05 NL 1.01 OV 0.95 PT 0.95 ! SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 1.05 HN 0.94 KP 1.14 LA 0.86 ! MK 1.05 NL 1.00 OV 0.97 PT 0.96 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 1.06 HN 1.02 KP 1.01 LA 0.92 ! MK 1.03 NL 0.94 OV 0.98 PT 0.96 ! SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 1.10 HN 1.02 KP 1.20 LA 0.91 ! MK 1.01 NL 1.05 OV 0.94 PT 0.94 ! SC 0.99 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 1.00* HN 1.00* KP 1.00* LA 1.00* ! MK 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 1.04 HN 1.05 KP 1.18 LA 0.87 ! MK 0.99 NL 0.86 OV 0.98 PT 0.91 ! SC 1.02 ! ! ! Fit before self-cal, rms=0.087211Jy sigma=2.533504 ! Fit after self-cal, rms=0.075850Jy sigma=2.223897 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8503 mas, bmaj=2.483 mas, bpa=-3.965 degrees ! Estimated noise=0.397622 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.6, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260788 Jy ! Component: 100 - total flux cleaned = 0.0386789 Jy ! Component: 150 - total flux cleaned = 0.0467529 Jy ! Component: 200 - total flux cleaned = 0.0523916 Jy ! Total flux subtracted in 200 components = 0.0523916 Jy ! Clean residual min=-0.011435 max=0.013845 Jy/beam ! Clean residual mean=-0.000016 rms=0.003406 Jy/beam ! Combined flux in latest and established models = 0.643349 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 56 components and 0.643349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.067271Jy sigma=1.931151 ! Fit after self-cal, rms=0.066951Jy sigma=1.921862 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.066951Jy sigma=1.921862 ! Fit after self-cal, rms=0.061019Jy sigma=1.740609 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8532 mas, bmaj=2.491 mas, bpa=-4.047 degrees ! Estimated noise=0.399074 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435343 Jy ! Component: 100 - total flux cleaned = 0.00690475 Jy ! Component: 150 - total flux cleaned = 0.00906067 Jy ! Component: 200 - total flux cleaned = 0.010433 Jy ! Total flux subtracted in 200 components = 0.010433 Jy ! Clean residual min=-0.010847 max=0.012247 Jy/beam ! Clean residual mean=-0.000002 rms=0.002936 Jy/beam ! Combined flux in latest and established models = 0.653782 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 72 components and 0.653782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.060374Jy sigma=1.716435 ! Fit after self-cal, rms=0.060327Jy sigma=1.714511 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165191 Jy ! Component: 100 - total flux cleaned = 0.00216803 Jy ! Component: 150 - total flux cleaned = 0.00277515 Jy ! Component: 200 - total flux cleaned = 0.0032688 Jy ! Total flux subtracted in 200 components = 0.0032688 Jy ! Clean residual min=-0.010869 max=0.012049 Jy/beam ! Clean residual mean=-0.000002 rms=0.002877 Jy/beam ! Combined flux in latest and established models = 0.65705 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 79 components and 0.65705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.060112Jy sigma=1.707596 ! Fit after self-cal, rms=0.060107Jy sigma=1.706990 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.060107Jy sigma=1.706990 ! Fit after self-cal, rms=0.059908Jy sigma=1.704774 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8546 mas, bmaj=2.492 mas, bpa=-3.989 degrees ! Estimated noise=0.398592 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128893 Jy ! Component: 100 - total flux cleaned = 0.000213521 Jy ! Component: 150 - total flux cleaned = 0.000281932 Jy ! Component: 200 - total flux cleaned = 0.000404822 Jy ! Total flux subtracted in 200 components = 0.000404822 Jy ! Clean residual min=-0.010007 max=0.012160 Jy/beam ! Clean residual mean=-0.000003 rms=0.002832 Jy/beam ! Combined flux in latest and established models = 0.657455 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 0.657455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.059710Jy sigma=1.699406 ! Fit after self-cal, rms=0.059701Jy sigma=1.698888 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.2, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119625 Jy ! Component: 100 - total flux cleaned = 0.0184014 Jy ! Component: 150 - total flux cleaned = 0.0224185 Jy ! Component: 200 - total flux cleaned = 0.0254288 Jy ! Total flux subtracted in 200 components = 0.0254288 Jy ! Clean residual min=-0.008653 max=0.009526 Jy/beam ! Clean residual mean=0.000004 rms=0.002166 Jy/beam ! Combined flux in latest and established models = 0.682884 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 123 components and 0.682884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.057300Jy sigma=1.621091 ! Fit after self-cal, rms=0.057154Jy sigma=1.614199 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.057154Jy sigma=1.614199 ! Fit after self-cal, rms=0.056788Jy sigma=1.602749 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.075 mas, bmaj=4.648 mas, bpa=-6.589 degrees ! Estimated noise=0.508111 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00843366 Jy ! Component: 100 - total flux cleaned = 0.0121373 Jy ! Component: 150 - total flux cleaned = 0.0140399 Jy ! Component: 200 - total flux cleaned = 0.0153595 Jy ! Total flux subtracted in 200 components = 0.0153595 Jy ! Clean residual min=-0.009508 max=0.008731 Jy/beam ! Clean residual mean=0.000012 rms=0.002902 Jy/beam ! Combined flux in latest and established models = 0.698244 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 145 components and 0.698244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056417Jy sigma=1.589036 ! Fit after self-cal, rms=0.056308Jy sigma=1.586076 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239071 Jy ! Component: 100 - total flux cleaned = 0.00369299 Jy ! Component: 150 - total flux cleaned = 0.00467864 Jy ! Component: 200 - total flux cleaned = 0.00550175 Jy ! Total flux subtracted in 200 components = 0.00550175 Jy ! Clean residual min=-0.009860 max=0.008066 Jy/beam ! Clean residual mean=0.000013 rms=0.002668 Jy/beam ! Combined flux in latest and established models = 0.703745 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 156 components and 0.703745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056415Jy sigma=1.588792 ! Fit after self-cal, rms=0.056349Jy sigma=1.587593 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8564 mas, bmaj=2.498 mas, bpa=-3.995 degrees ! Estimated noise=0.397893 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8564 x 2.498 at -3.995 degrees (North through East) ! Clean map min=-0.0074288 max=0.35583 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7035 mas, bmaj=2.155 mas, bpa=-3.807 degrees ! Estimated noise=0.533661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.26608 Jy ! Component: 100 - total flux cleaned = 0.398823 Jy ! Component: 150 - total flux cleaned = 0.470974 Jy ! Component: 200 - total flux cleaned = 0.51223 Jy ! Total flux subtracted in 200 components = 0.51223 Jy ! Clean residual min=-0.014457 max=0.020566 Jy/beam ! Clean residual mean=0.000004 rms=0.003948 Jy/beam ! Combined flux in latest and established models = 0.51223 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.51223 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8564 mas, bmaj=2.498 mas, bpa=-3.995 degrees ! Estimated noise=0.397893 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0350788 Jy ! Component: 100 - total flux cleaned = 0.0588744 Jy ! Component: 150 - total flux cleaned = 0.0772657 Jy ! Component: 200 - total flux cleaned = 0.0925059 Jy ! Total flux subtracted in 200 components = 0.0925059 Jy ! Clean residual min=-0.012590 max=0.014466 Jy/beam ! Clean residual mean=-0.000001 rms=0.003745 Jy/beam ! Combined flux in latest and established models = 0.604736 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 47 components and 0.604736 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.075 mas, bmaj=4.648 mas, bpa=-6.589 degrees ! Estimated noise=0.508111 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240628 Jy ! Component: 100 - total flux cleaned = 0.0409551 Jy ! Component: 150 - total flux cleaned = 0.0532245 Jy ! Component: 200 - total flux cleaned = 0.0625459 Jy ! Total flux subtracted in 200 components = 0.0625459 Jy ! Clean residual min=-0.011891 max=0.010342 Jy/beam ! Clean residual mean=0.000005 rms=0.003565 Jy/beam ! Combined flux in latest and established models = 0.667282 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00725501 Jy ! Component: 100 - total flux cleaned = 0.0129885 Jy ! Component: 150 - total flux cleaned = 0.0175897 Jy ! Component: 200 - total flux cleaned = 0.0213492 Jy ! Total flux subtracted in 200 components = 0.0213492 Jy ! Clean residual min=-0.010902 max=0.008774 Jy/beam ! Clean residual mean=0.000011 rms=0.002803 Jy/beam ! Combined flux in latest and established models = 0.688631 Jy ! Adding 104 model components to the UV plane model. ! The established model now contains 137 components and 0.688631 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8564 mas, bmaj=2.498 mas, bpa=-3.995 degrees ! Estimated noise=0.397893 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000984176 Jy ! Component: 100 - total flux cleaned = 0.00230612 Jy ! Component: 150 - total flux cleaned = 0.00378074 Jy ! Component: 200 - total flux cleaned = 0.00480214 Jy ! Total flux subtracted in 200 components = 0.00480214 Jy ! Clean residual min=-0.007396 max=0.009078 Jy/beam ! Clean residual mean=0.000006 rms=0.001781 Jy/beam ! Combined flux in latest and established models = 0.693433 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 153 components and 0.693433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.056613Jy sigma=1.594819 ! Fit after self-cal, rms=0.056475Jy sigma=1.591417 wmodel /scr/pima/bs241g_uvs/J1232-0224_X_map.mod ! Writing 153 model components to file: /scr/pima/bs241g_uvs/J1232-0224_X_map.mod wobs /scr/pima/bs241g_uvs/J1232-0224_X_uvs.fits ! Writing UV FITS file: /scr/pima/bs241g_uvs/J1232-0224_X_uvs.fits wwins /scr/pima/bs241g_uvs/J1232-0224_X_map.win ! wwins: Wrote 3 windows to /scr/pima/bs241g_uvs/J1232-0224_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187874 Jy ! Component: 100 - total flux cleaned = 0.00302605 Jy ! Component: 150 - total flux cleaned = 0.00450377 Jy ! Component: 200 - total flux cleaned = 0.00564211 Jy ! Component: 250 - total flux cleaned = 0.00650439 Jy ! Component: 300 - total flux cleaned = 0.00694847 Jy ! Component: 350 - total flux cleaned = 0.00727831 Jy ! Component: 400 - total flux cleaned = 0.00743088 Jy ! Component: 450 - total flux cleaned = 0.00772434 Jy ! Component: 500 - total flux cleaned = 0.00800016 Jy ! Component: 550 - total flux cleaned = 0.00832545 Jy ! Component: 600 - total flux cleaned = 0.00857417 Jy ! Component: 650 - total flux cleaned = 0.00887077 Jy ! Component: 700 - total flux cleaned = 0.00915134 Jy ! Component: 750 - total flux cleaned = 0.0093115 Jy ! Component: 800 - total flux cleaned = 0.00946577 Jy ! Component: 850 - total flux cleaned = 0.00971283 Jy ! Component: 900 - total flux cleaned = 0.00994924 Jy ! Component: 950 - total flux cleaned = 0.00999554 Jy ! Component: 1000 - total flux cleaned = 0.0102599 Jy ! Component: 1050 - total flux cleaned = 0.0104693 Jy ! Component: 1100 - total flux cleaned = 0.0105497 Jy ! Component: 1150 - total flux cleaned = 0.0107052 Jy ! Component: 1200 - total flux cleaned = 0.0107805 Jy ! Component: 1250 - total flux cleaned = 0.01089 Jy ! Component: 1300 - total flux cleaned = 0.0109262 Jy ! Component: 1350 - total flux cleaned = 0.010893 Jy ! Component: 1400 - total flux cleaned = 0.0110245 Jy ! Component: 1450 - total flux cleaned = 0.0109933 Jy ! Component: 1500 - total flux cleaned = 0.0109937 Jy ! Component: 1550 - total flux cleaned = 0.0109643 Jy ! Component: 1600 - total flux cleaned = 0.0109356 Jy ! Component: 1650 - total flux cleaned = 0.0108509 Jy ! Component: 1700 - total flux cleaned = 0.0106869 Jy ! Component: 1750 - total flux cleaned = 0.0106339 Jy ! Component: 1800 - total flux cleaned = 0.0105562 Jy ! Component: 1850 - total flux cleaned = 0.0104058 Jy ! Component: 1900 - total flux cleaned = 0.0104306 Jy ! Component: 1950 - total flux cleaned = 0.0103108 Jy ! Component: 2000 - total flux cleaned = 0.0103343 Jy ! Component: 2050 - total flux cleaned = 0.0103114 Jy ! Component: 2100 - total flux cleaned = 0.0102662 Jy ! Component: 2150 - total flux cleaned = 0.0102447 Jy ! Component: 2200 - total flux cleaned = 0.0102447 Jy ! Component: 2250 - total flux cleaned = 0.0101604 Jy ! Component: 2300 - total flux cleaned = 0.010078 Jy ! Component: 2350 - total flux cleaned = 0.0100782 Jy ! Component: 2400 - total flux cleaned = 0.0100581 Jy ! Component: 2450 - total flux cleaned = 0.00997955 Jy ! Component: 2500 - total flux cleaned = 0.00990271 Jy ! Component: 2550 - total flux cleaned = 0.00984644 Jy ! Component: 2600 - total flux cleaned = 0.00977222 Jy ! Component: 2650 - total flux cleaned = 0.00968167 Jy ! Component: 2700 - total flux cleaned = 0.00966384 Jy ! Component: 2750 - total flux cleaned = 0.0096463 Jy ! Component: 2800 - total flux cleaned = 0.00962874 Jy ! Component: 2850 - total flux cleaned = 0.00961145 Jy ! Component: 2900 - total flux cleaned = 0.00961126 Jy ! Component: 2950 - total flux cleaned = 0.00959449 Jy ! Component: 3000 - total flux cleaned = 0.00956161 Jy ! Component: 3050 - total flux cleaned = 0.00959384 Jy ! Component: 3100 - total flux cleaned = 0.00956208 Jy ! Component: 3150 - total flux cleaned = 0.00954652 Jy ! Component: 3200 - total flux cleaned = 0.00957766 Jy ! Component: 3250 - total flux cleaned = 0.00954688 Jy ! Component: 3300 - total flux cleaned = 0.00953186 Jy ! Component: 3350 - total flux cleaned = 0.00948681 Jy ! Component: 3400 - total flux cleaned = 0.0095166 Jy ! Component: 3450 - total flux cleaned = 0.00947259 Jy ! Component: 3500 - total flux cleaned = 0.00945816 Jy ! Component: 3550 - total flux cleaned = 0.0094581 Jy ! Component: 3600 - total flux cleaned = 0.00941519 Jy ! Component: 3650 - total flux cleaned = 0.00938688 Jy ! Component: 3700 - total flux cleaned = 0.00940065 Jy ! Component: 3750 - total flux cleaned = 0.0093172 Jy ! Component: 3800 - total flux cleaned = 0.00928953 Jy ! Component: 3850 - total flux cleaned = 0.00926215 Jy ! Component: 3900 - total flux cleaned = 0.00924852 Jy ! Component: 3950 - total flux cleaned = 0.00922167 Jy ! Component: 4000 - total flux cleaned = 0.00920838 Jy ! Component: 4050 - total flux cleaned = 0.0092086 Jy ! Total flux subtracted in 4096 components = 0.00920861 Jy ! Clean residual min=-0.000807 max=0.000763 Jy/beam ! Clean residual mean=0.000002 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.702642 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 453 components and 0.702642 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bs241g_uvs/J1232-0224_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8564 x 2.498 at -3.995 degrees (North through East) ! Clean map min=-0.003596 max=0.35827 Jy/beam ! Writing clean map to FITS file: /scr/pima/bs241g_uvs/J1232-0224_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.35827 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000221341 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.185342 0.185342 0.370684 0.741367 1.48273 2.96547 5.93094 11.8619 23.7238 47.4475 94.895 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.358 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1618.63 quit ! Quitting program ! Log file /scr/pima/bs241g_uvs/J1232-0224_X_uvs.log closed on Mon Jul 27 06:03:09 2015