! Started logfile: /scr/pima/bs241e_uvs/J1153-1105_X_uvs.log on Fri May 15 09:15:29 2015 obs /scr/pima/bs241e_uvs/J1153-1105_X_uva.fits ! Reading UV FITS file: /scr/pima/bs241e_uvs/J1153-1105_X_uva.fits ! AN table 1: 33 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.861111 visibilities/baseline/integration-bin. ! Found source: J1153-1105 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 7.392e+09 3.2e+07 1 3.2e+07 ! 02 2 7.424e+09 3.2e+07 1 3.2e+07 ! 03 3 7.456e+09 3.2e+07 1 3.2e+07 ! 04 4 7.552e+09 3.2e+07 1 3.2e+07 ! 05 5 7.744e+09 3.2e+07 1 3.2e+07 ! 06 6 7.776e+09 3.2e+07 1 3.2e+07 ! 07 7 7.808e+09 3.2e+07 1 3.2e+07 ! 08 8 7.84e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): I ! ! Read 0 lines of history. ! ! Reading 8184 visibilities. select RR ! Polarization RR is unavailable. ! Selecting polarization: I, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/bs241e_uvs/J1153-1105_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002088Jy sigma=30.724848 ! Fit after self-cal, rms=0.928424Jy sigma=28.413537 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7805 mas, bmaj=1.942 mas, bpa=7.861 degrees ! Estimated noise=0.471044 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0506979 Jy ! Component: 100 - total flux cleaned = 0.0658082 Jy ! Total flux subtracted in 100 components = 0.0658082 Jy ! Clean residual min=-0.003775 max=0.006599 Jy/beam ! Clean residual mean=0.000004 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.0658081 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0658081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.030537Jy sigma=0.851362 ! Fit after self-cal, rms=0.030140Jy sigma=0.841162 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.007596 Jy ! Component: 100 - total flux cleaned = 0.0121976 Jy ! Total flux subtracted in 100 components = 0.0121976 Jy ! Clean residual min=-0.002824 max=0.003307 Jy/beam ! Clean residual mean=0.000003 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0780057 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 0.0780057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.027090Jy sigma=0.735342 ! Fit after self-cal, rms=0.027083Jy sigma=0.734819 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.029 mas, bmaj=2.517 mas, bpa=13.58 degrees ! Estimated noise=0.313324 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00493941 Jy ! Component: 100 - total flux cleaned = 0.00769896 Jy ! Component: 150 - total flux cleaned = 0.00938293 Jy ! Component: 200 - total flux cleaned = 0.0104317 Jy ! Total flux subtracted in 200 components = 0.0104317 Jy ! Clean residual min=-0.002847 max=0.002748 Jy/beam ! Clean residual mean=0.000006 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.0884374 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 0.0884374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.026140Jy sigma=0.703479 ! Fit after self-cal, rms=0.026145Jy sigma=0.703404 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.029 x 2.517 at 13.58 degrees (North through East) ! Clean map min=-0.0027226 max=0.068895 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.04 HN 1.04 LA 0.96 ! MK 0.95 NL 1.01 OV 0.94 PT 0.89 ! SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 0.98 LA 0.95 ! MK 1.00* NL 1.04 OV 1.00* PT 0.93 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.01 HN 0.99 LA 0.88 ! MK 1.00* NL 0.99 OV 1.00* PT 0.94 ! SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 1.09 LA 0.97 ! MK 1.00* NL 1.10 OV 1.00* PT 0.93 ! SC 1.07 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.13 HN 1.14 LA 1.00 ! MK 1.00* NL 1.05 OV 1.00* PT 0.89 ! SC 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.11 HN 1.17 LA 1.00 ! MK 1.00* NL 1.10 OV 1.00* PT 0.94 ! SC 1.08 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.10 HN 1.09 LA 0.97 ! MK 1.00* NL 1.03 OV 1.00* PT 0.86 ! SC 1.05 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.06 HN 1.05 LA 0.94 ! MK 1.00 NL 1.00 OV 0.96 PT 0.87 ! SC 1.08 ! ! ! Fit before self-cal, rms=0.026145Jy sigma=0.703404 ! Fit after self-cal, rms=0.025438Jy sigma=0.661402 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.032 mas, bmaj=2.526 mas, bpa=13.14 degrees ! Estimated noise=0.315976 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149273 Jy ! Component: 100 - total flux cleaned = 0.00178394 Jy ! Component: 150 - total flux cleaned = 0.00190542 Jy ! Component: 200 - total flux cleaned = 0.00203036 Jy ! Total flux subtracted in 200 components = 0.00203036 Jy ! Clean residual min=-0.001050 max=0.001110 Jy/beam ! Clean residual mean=-0.000001 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.0904677 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.0904677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025342Jy sigma=0.658162 ! Fit after self-cal, rms=0.025344Jy sigma=0.657806 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025344Jy sigma=0.657806 ! Fit after self-cal, rms=0.025145Jy sigma=0.656319 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.028 mas, bmaj=2.512 mas, bpa=13 degrees ! Estimated noise=0.314998 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000718045 Jy ! Component: 100 - total flux cleaned = 0.000949011 Jy ! Component: 150 - total flux cleaned = 0.000965925 Jy ! Component: 200 - total flux cleaned = 0.000979549 Jy ! Total flux subtracted in 200 components = 0.000979549 Jy ! Clean residual min=-0.001023 max=0.000961 Jy/beam ! Clean residual mean=-0.000001 rms=0.000242 Jy/beam ! Combined flux in latest and established models = 0.0914473 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 77 components and 0.0914473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025119Jy sigma=0.655364 ! Fit after self-cal, rms=0.025115Jy sigma=0.655315 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010841 Jy ! Component: 100 - total flux cleaned = 9.65735e-05 Jy ! Component: 150 - total flux cleaned = 9.65319e-05 Jy ! Component: 200 - total flux cleaned = 7.49235e-05 Jy ! Total flux subtracted in 200 components = 7.49235e-05 Jy ! Clean residual min=-0.001021 max=0.000953 Jy/beam ! Clean residual mean=-0.000001 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.0915222 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 89 components and 0.0915222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025105Jy sigma=0.654973 ! Fit after self-cal, rms=0.025104Jy sigma=0.654954 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.025104Jy sigma=0.654954 ! Fit after self-cal, rms=0.024964Jy sigma=0.652572 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.025 mas, bmaj=2.505 mas, bpa=12.92 degrees ! Estimated noise=0.314608 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000434449 Jy ! Component: 100 - total flux cleaned = 0.00054633 Jy ! Component: 150 - total flux cleaned = 0.000630152 Jy ! Component: 200 - total flux cleaned = 0.000658492 Jy ! Total flux subtracted in 200 components = 0.000658492 Jy ! Clean residual min=-0.000999 max=0.000882 Jy/beam ! Clean residual mean=-0.000000 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.0921807 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 103 components and 0.0921807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024951Jy sigma=0.652152 ! Fit after self-cal, rms=0.024950Jy sigma=0.652110 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.46517e-05 Jy ! Component: 100 - total flux cleaned = 5.56464e-05 Jy ! Component: 150 - total flux cleaned = 5.55277e-05 Jy ! Component: 200 - total flux cleaned = 4.76354e-05 Jy ! Total flux subtracted in 200 components = 4.76354e-05 Jy ! Clean residual min=-0.000987 max=0.000869 Jy/beam ! Clean residual mean=-0.000000 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.0922283 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 107 components and 0.0922283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024945Jy sigma=0.651910 ! Fit after self-cal, rms=0.024945Jy sigma=0.651897 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024945Jy sigma=0.651897 ! Fit after self-cal, rms=0.024892Jy sigma=0.651603 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.031 mas, bmaj=4.111 mas, bpa=13.33 degrees ! Estimated noise=0.373206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000398093 Jy ! Component: 100 - total flux cleaned = 0.000520878 Jy ! Component: 150 - total flux cleaned = 0.000590896 Jy ! Component: 200 - total flux cleaned = 0.000624999 Jy ! Total flux subtracted in 200 components = 0.000624999 Jy ! Clean residual min=-0.000930 max=0.000960 Jy/beam ! Clean residual mean=-0.000001 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.0928533 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 127 components and 0.0928533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024886Jy sigma=0.651418 ! Fit after self-cal, rms=0.024884Jy sigma=0.651397 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.29369e-05 Jy ! Component: 100 - total flux cleaned = 7.72479e-05 Jy ! Component: 150 - total flux cleaned = 6.94039e-05 Jy ! Component: 200 - total flux cleaned = 6.59987e-05 Jy ! Total flux subtracted in 200 components = 6.59987e-05 Jy ! Clean residual min=-0.000936 max=0.000944 Jy/beam ! Clean residual mean=-0.000001 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.0929193 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 134 components and 0.0929193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024883Jy sigma=0.651350 ! Fit after self-cal, rms=0.024883Jy sigma=0.651344 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.024 mas, bmaj=2.5 mas, bpa=12.86 degrees ! Estimated noise=0.314597 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.024 x 2.5 at 12.86 degrees (North through East) ! Clean map min=-0.00090906 max=0.069183 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7728 mas, bmaj=1.932 mas, bpa=6.858 degrees ! Estimated noise=0.46902 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0509721 Jy ! Component: 100 - total flux cleaned = 0.0665493 Jy ! Component: 150 - total flux cleaned = 0.0741731 Jy ! Component: 200 - total flux cleaned = 0.0788608 Jy ! Total flux subtracted in 200 components = 0.0788608 Jy ! Clean residual min=-0.001741 max=0.002542 Jy/beam ! Clean residual mean=0.000001 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.0788607 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.0788607 Jy ! Inverting map and beam ! Estimated beam: bmin=1.024 mas, bmaj=2.5 mas, bpa=12.86 degrees ! Estimated noise=0.314597 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00477842 Jy ! Component: 100 - total flux cleaned = 0.00753772 Jy ! Component: 150 - total flux cleaned = 0.00926197 Jy ! Component: 200 - total flux cleaned = 0.0104676 Jy ! Total flux subtracted in 200 components = 0.0104676 Jy ! Clean residual min=-0.001085 max=0.001130 Jy/beam ! Clean residual mean=0.000001 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.0893284 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 59 components and 0.0893284 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.031 mas, bmaj=4.111 mas, bpa=13.33 degrees ! Estimated noise=0.373206 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136573 Jy ! Component: 100 - total flux cleaned = 0.00218635 Jy ! Component: 150 - total flux cleaned = 0.00271557 Jy ! Component: 200 - total flux cleaned = 0.00292492 Jy ! Total flux subtracted in 200 components = 0.00292492 Jy ! Clean residual min=-0.000964 max=0.000918 Jy/beam ! Clean residual mean=-0.000000 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 0.0922533 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114765 Jy ! Component: 100 - total flux cleaned = 0.000206179 Jy ! Component: 150 - total flux cleaned = 0.000280118 Jy ! Component: 200 - total flux cleaned = 0.000335285 Jy ! Total flux subtracted in 200 components = 0.000335285 Jy ! Clean residual min=-0.000937 max=0.000922 Jy/beam ! Clean residual mean=-0.000001 rms=0.000260 Jy/beam ! Combined flux in latest and established models = 0.0925886 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 96 components and 0.0925886 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.024 mas, bmaj=2.5 mas, bpa=12.86 degrees ! Estimated noise=0.314597 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.64986e-05 Jy ! Component: 100 - total flux cleaned = 4.78693e-05 Jy ! Component: 150 - total flux cleaned = 0.000107128 Jy ! Component: 200 - total flux cleaned = 0.00012766 Jy ! Total flux subtracted in 200 components = 0.00012766 Jy ! Clean residual min=-0.000971 max=0.000835 Jy/beam ! Clean residual mean=-0.000000 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.0927162 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 113 components and 0.0927162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.024887Jy sigma=0.651881 ! Fit after self-cal, rms=0.024884Jy sigma=0.651775 wmodel /scr/pima/bs241e_uvs/J1153-1105_X_map.mod ! Writing 113 model components to file: /scr/pima/bs241e_uvs/J1153-1105_X_map.mod wobs /scr/pima/bs241e_uvs/J1153-1105_X_uvs.fits ! Writing UV FITS file: /scr/pima/bs241e_uvs/J1153-1105_X_uvs.fits wwins /scr/pima/bs241e_uvs/J1153-1105_X_map.win ! wwins: Wrote 2 windows to /scr/pima/bs241e_uvs/J1153-1105_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00019825 Jy ! Component: 100 - total flux cleaned = -0.000270253 Jy ! Component: 150 - total flux cleaned = -0.000270996 Jy ! Component: 200 - total flux cleaned = -0.000219006 Jy ! Component: 250 - total flux cleaned = -0.000181706 Jy ! Component: 300 - total flux cleaned = -0.000193829 Jy ! Component: 350 - total flux cleaned = -0.000158617 Jy ! Component: 400 - total flux cleaned = -0.000192636 Jy ! Component: 450 - total flux cleaned = -0.00019263 Jy ! Component: 500 - total flux cleaned = -0.00025776 Jy ! Component: 550 - total flux cleaned = -0.000279104 Jy ! Component: 600 - total flux cleaned = -0.000299868 Jy ! Component: 650 - total flux cleaned = -0.000320319 Jy ! Component: 700 - total flux cleaned = -0.000370379 Jy ! Component: 750 - total flux cleaned = -0.000429229 Jy ! Component: 800 - total flux cleaned = -0.00045819 Jy ! Component: 850 - total flux cleaned = -0.000505703 Jy ! Component: 900 - total flux cleaned = -0.00056185 Jy ! Component: 950 - total flux cleaned = -0.000589338 Jy ! Component: 1000 - total flux cleaned = -0.000607436 Jy ! Component: 1050 - total flux cleaned = -0.000643093 Jy ! Component: 1100 - total flux cleaned = -0.000678068 Jy ! Component: 1150 - total flux cleaned = -0.000686862 Jy ! Component: 1200 - total flux cleaned = -0.000712664 Jy ! Component: 1250 - total flux cleaned = -0.00072971 Jy ! Component: 1300 - total flux cleaned = -0.00078807 Jy ! Component: 1350 - total flux cleaned = -0.000804565 Jy ! Component: 1400 - total flux cleaned = -0.000828926 Jy ! Component: 1450 - total flux cleaned = -0.000836952 Jy ! Component: 1500 - total flux cleaned = -0.000852897 Jy ! Component: 1550 - total flux cleaned = -0.000837276 Jy ! Component: 1600 - total flux cleaned = -0.000852766 Jy ! Component: 1650 - total flux cleaned = -0.000822171 Jy ! Component: 1700 - total flux cleaned = -0.000837391 Jy ! Component: 1750 - total flux cleaned = -0.000814903 Jy ! Component: 1800 - total flux cleaned = -0.000814905 Jy ! Component: 1850 - total flux cleaned = -0.000822257 Jy ! Component: 1900 - total flux cleaned = -0.000836797 Jy ! Component: 1950 - total flux cleaned = -0.00082224 Jy ! Component: 2000 - total flux cleaned = -0.000800757 Jy ! Component: 2050 - total flux cleaned = -0.000807711 Jy ! Component: 2100 - total flux cleaned = -0.000786564 Jy ! Component: 2150 - total flux cleaned = -0.000800536 Jy ! Component: 2200 - total flux cleaned = -0.000800545 Jy ! Component: 2250 - total flux cleaned = -0.000800657 Jy ! Component: 2300 - total flux cleaned = -0.000807392 Jy ! Component: 2350 - total flux cleaned = -0.000793832 Jy ! Component: 2400 - total flux cleaned = -0.000807276 Jy ! Component: 2450 - total flux cleaned = -0.000794019 Jy ! Component: 2500 - total flux cleaned = -0.000807178 Jy ! Component: 2550 - total flux cleaned = -0.000800675 Jy ! Component: 2600 - total flux cleaned = -0.000839748 Jy ! Component: 2650 - total flux cleaned = -0.000820313 Jy ! Component: 2700 - total flux cleaned = -0.000820324 Jy ! Component: 2750 - total flux cleaned = -0.00080121 Jy ! Component: 2800 - total flux cleaned = -0.000794908 Jy ! Component: 2850 - total flux cleaned = -0.000801182 Jy ! Component: 2900 - total flux cleaned = -0.000788696 Jy ! Component: 2950 - total flux cleaned = -0.000788628 Jy ! Component: 3000 - total flux cleaned = -0.000751764 Jy ! Component: 3050 - total flux cleaned = -0.0007884 Jy ! Component: 3100 - total flux cleaned = -0.000758015 Jy ! Component: 3150 - total flux cleaned = -0.000764042 Jy ! Component: 3200 - total flux cleaned = -0.00075199 Jy ! Component: 3250 - total flux cleaned = -0.00072223 Jy ! Component: 3300 - total flux cleaned = -0.000716368 Jy ! Component: 3350 - total flux cleaned = -0.000734005 Jy ! Component: 3400 - total flux cleaned = -0.000704849 Jy ! Component: 3450 - total flux cleaned = -0.000693268 Jy ! Component: 3500 - total flux cleaned = -0.000698964 Jy ! Component: 3550 - total flux cleaned = -0.000687604 Jy ! Component: 3600 - total flux cleaned = -0.000698985 Jy ! Component: 3650 - total flux cleaned = -0.00072159 Jy ! Component: 3700 - total flux cleaned = -0.000704794 Jy ! Component: 3750 - total flux cleaned = -0.000704823 Jy ! Component: 3800 - total flux cleaned = -0.000688178 Jy ! Component: 3850 - total flux cleaned = -0.000704762 Jy ! Component: 3900 - total flux cleaned = -0.000682865 Jy ! Component: 3950 - total flux cleaned = -0.000710106 Jy ! Component: 4000 - total flux cleaned = -0.000704689 Jy ! Component: 4050 - total flux cleaned = -0.000693908 Jy ! Total flux subtracted in 4096 components = -0.000683234 Jy ! Clean residual min=-0.000371 max=0.000425 Jy/beam ! Clean residual mean=-0.000000 rms=0.000094 Jy/beam ! Combined flux in latest and established models = 0.092033 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 373 components and 0.0920331 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bs241e_uvs/J1153-1105_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.024 x 2.5 at 12.86 degrees (North through East) ! Clean map min=-0.00063662 max=0.069233 Jy/beam ! Writing clean map to FITS file: /scr/pima/bs241e_uvs/J1153-1105_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0692335 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 9.31029e-05 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.40343 0.40343 0.806861 1.61372 3.22744 6.45489 12.9098 25.8195 51.6391 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.069 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 743.622 quit ! Quitting program ! Log file /scr/pima/bs241e_uvs/J1153-1105_X_uvs.log closed on Fri May 15 09:15:33 2015