! Started logfile: /scr/pima/bs241e_uvs/J1119+0410_X_uvs.log on Fri May 15 09:15:20 2015
obs /scr/pima/bs241e_uvs/J1119+0410_X_uva.fits
! Reading UV FITS file: /scr/pima/bs241e_uvs/J1119+0410_X_uva.fits
! AN table 1: 33 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.832492 visibilities/baseline/integration-bin.
! Found source: J1119+0410
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 0 lines of history.
! 
! Reading 7912 visibilities.
select RR
! Polarization RR is unavailable.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bs241e_uvs/J1119+0410_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 96 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 38 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016123Jy  sigma=33.893319
! Fit after  self-cal, rms=0.881895Jy  sigma=29.383040
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8013 mas, bmaj=1.936 mas, bpa=1.675 degrees
! Estimated noise=0.473336 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.087046 Jy
! Component: 100  -  total flux cleaned = 0.112477 Jy
! Total flux subtracted in 100 components = 0.112477 Jy
! Clean residual min=-0.004852 max=0.010030 Jy/beam
! Clean residual mean=0.000002 rms=0.001222 Jy/beam
! Combined flux in latest and established models = 0.112477 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.112477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033567Jy  sigma=1.015302
! Fit after  self-cal, rms=0.033465Jy  sigma=1.012720
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100131 Jy
! Component: 100  -  total flux cleaned = 0.0144537 Jy
! Total flux subtracted in 100 components = 0.0144537 Jy
! Clean residual min=-0.004105 max=0.004450 Jy/beam
! Clean residual mean=0.000001 rms=0.000865 Jy/beam
! Combined flux in latest and established models = 0.126931 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.126931 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030319Jy  sigma=0.899016
! Fit after  self-cal, rms=0.030320Jy  sigma=0.898887
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.08 mas, bmaj=2.321 mas, bpa=8.601 degrees
! Estimated noise=0.293786 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00287034 Jy
! Component: 100  -  total flux cleaned = 0.00446499 Jy
! Component: 150  -  total flux cleaned = 0.0054337 Jy
! Component: 200  -  total flux cleaned = 0.00581823 Jy
! Total flux subtracted in 200 components = 0.00581823 Jy
! Clean residual min=-0.004779 max=0.004516 Jy/beam
! Clean residual mean=0.000005 rms=0.000914 Jy/beam
! Combined flux in latest and established models = 0.132749 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 22 components and 0.132749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030075Jy  sigma=0.888731
! Fit after  self-cal, rms=0.030067Jy  sigma=0.888409
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.08 x 2.321 at 8.601 degrees (North through East)
! Clean map  min=-0.0046272  max=0.11656 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.03     HN        0.98     LA        1.01     
!   MK        0.96     NL        1.01     OV        0.90     PT        0.89     
!   SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        0.95     LA        0.95     
!   MK        1.00*    NL        1.07     OV        1.00*    PT        0.93     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.04     HN        0.94     LA        0.93     
!   MK        1.00*    NL        1.07     OV        1.00*    PT        0.93     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.09     HN        1.06     LA        0.99     
!   MK        1.00*    NL        1.07     OV        1.00*    PT        0.93     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.09     HN        1.06     LA        1.04     
!   MK        1.00*    NL        1.04     OV        1.00*    PT        0.90     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.12     HN        1.08     LA        1.03     
!   MK        1.00*    NL        1.06     OV        1.00*    PT        0.95     
!   SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.11     HN        1.04     LA        1.01     
!   MK        1.00*    NL        1.05     OV        1.00*    PT        0.86     
!   SC        1.03     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.04     HN        1.04     LA        0.97     
!   MK        1.05     NL        1.03     OV        0.93     PT        0.87     
!   SC        1.05     
! 
! 
! Fit before self-cal, rms=0.030067Jy  sigma=0.888409
! Fit after  self-cal, rms=0.027742Jy  sigma=0.804171
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.081 mas, bmaj=2.342 mas, bpa=8.608 degrees
! Estimated noise=0.294077 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.4, -20.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00265304 Jy
! Component: 100  -  total flux cleaned = 0.00300966 Jy
! Component: 150  -  total flux cleaned = 0.00300843 Jy
! Component: 200  -  total flux cleaned = 0.00297895 Jy
! Total flux subtracted in 200 components = 0.00297895 Jy
! Clean residual min=-0.001695 max=0.001770 Jy/beam
! Clean residual mean=-0.000003 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.135728 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 47 components and 0.135728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027459Jy  sigma=0.795043
! Fit after  self-cal, rms=0.027453Jy  sigma=0.794603
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027453Jy  sigma=0.794603
! Fit after  self-cal, rms=0.027341Jy  sigma=0.793873
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.081 mas, bmaj=2.342 mas, bpa=8.567 degrees
! Estimated noise=0.293278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.22454e-07 Jy
! Component: 100  -  total flux cleaned = -2.56861e-05 Jy
! Component: 150  -  total flux cleaned = -2.61522e-05 Jy
! Component: 200  -  total flux cleaned = -6.49938e-05 Jy
! Total flux subtracted in 200 components = -6.49938e-05 Jy
! Clean residual min=-0.001534 max=0.001640 Jy/beam
! Clean residual mean=-0.000002 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.135663 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 55 components and 0.135663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027290Jy  sigma=0.792838
! Fit after  self-cal, rms=0.027289Jy  sigma=0.792818
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2.4, 11.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125247 Jy
! Component: 100  -  total flux cleaned = 0.00129166 Jy
! Component: 150  -  total flux cleaned = 0.00118474 Jy
! Component: 200  -  total flux cleaned = 0.00111334 Jy
! Total flux subtracted in 200 components = 0.00111334 Jy
! Clean residual min=-0.001318 max=0.001386 Jy/beam
! Clean residual mean=-0.000003 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.136776 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 70 components and 0.136776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027187Jy  sigma=0.789555
! Fit after  self-cal, rms=0.027184Jy  sigma=0.789446
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027184Jy  sigma=0.789446
! Fit after  self-cal, rms=0.027133Jy  sigma=0.783571
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=2.342 mas, bpa=8.433 degrees
! Estimated noise=0.292622 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000121867 Jy
! Component: 100  -  total flux cleaned = -9.05983e-05 Jy
! Component: 150  -  total flux cleaned = -0.00018446 Jy
! Component: 200  -  total flux cleaned = -0.000286845 Jy
! Total flux subtracted in 200 components = -0.000286845 Jy
! Clean residual min=-0.001103 max=0.001190 Jy/beam
! Clean residual mean=-0.000002 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.136489 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 82 components and 0.136489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027092Jy  sigma=0.782754
! Fit after  self-cal, rms=0.027092Jy  sigma=0.782713
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-16.6, 50.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000735089 Jy
! Component: 100  -  total flux cleaned = 0.000681169 Jy
! Component: 150  -  total flux cleaned = 0.000660861 Jy
! Component: 200  -  total flux cleaned = 0.000642554 Jy
! Total flux subtracted in 200 components = 0.000642554 Jy
! Clean residual min=-0.001037 max=0.000987 Jy/beam
! Clean residual mean=-0.000001 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.137132 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 94 components and 0.137132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027027Jy  sigma=0.781173
! Fit after  self-cal, rms=0.027025Jy  sigma=0.781102
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027025Jy  sigma=0.781102
! Fit after  self-cal, rms=0.026986Jy  sigma=0.780848
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.032 mas, bmaj=3.278 mas, bpa=9.596 degrees
! Estimated noise=0.342638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110218 Jy
! Component: 100  -  total flux cleaned = -0.000127576 Jy
! Component: 150  -  total flux cleaned = -0.000143542 Jy
! Component: 200  -  total flux cleaned = -0.000194924 Jy
! Total flux subtracted in 200 components = -0.000194924 Jy
! Clean residual min=-0.000902 max=0.000912 Jy/beam
! Clean residual mean=-0.000002 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.136937 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 112 components and 0.136937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026962Jy  sigma=0.780640
! Fit after  self-cal, rms=0.026962Jy  sigma=0.780622
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.99366e-05 Jy
! Component: 100  -  total flux cleaned = -3.00798e-05 Jy
! Component: 150  -  total flux cleaned = -4.9843e-05 Jy
! Component: 200  -  total flux cleaned = -5.8535e-05 Jy
! Total flux subtracted in 200 components = -5.8535e-05 Jy
! Clean residual min=-0.000882 max=0.000846 Jy/beam
! Clean residual mean=-0.000002 rms=0.000249 Jy/beam
! Combined flux in latest and established models = 0.136878 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 127 components and 0.136878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026952Jy  sigma=0.780528
! Fit after  self-cal, rms=0.026952Jy  sigma=0.780523
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.083 mas, bmaj=2.342 mas, bpa=8.33 degrees
! Estimated noise=0.292212 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.083 x 2.342 at 8.33 degrees (North through East)
! Clean map  min=-0.00089442  max=0.11655 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8007 mas, bmaj=1.957 mas, bpa=1.443 degrees
! Estimated noise=0.467401 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0858544 Jy
! Component: 100  -  total flux cleaned = 0.111304 Jy
! Component: 150  -  total flux cleaned = 0.121288 Jy
! Component: 200  -  total flux cleaned = 0.125827 Jy
! Total flux subtracted in 200 components = 0.125827 Jy
! Clean residual min=-0.002533 max=0.003040 Jy/beam
! Clean residual mean=-0.000000 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.125827 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.125827 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.083 mas, bmaj=2.342 mas, bpa=8.33 degrees
! Estimated noise=0.292212 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00335567 Jy
! Component: 100  -  total flux cleaned = 0.00554522 Jy
! Component: 150  -  total flux cleaned = 0.0072801 Jy
! Component: 200  -  total flux cleaned = 0.00843128 Jy
! Total flux subtracted in 200 components = 0.00843128 Jy
! Clean residual min=-0.001451 max=0.001649 Jy/beam
! Clean residual mean=-0.000001 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.134258 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 35 components and 0.134258 Jy
! Inverting map 
! Added new window around map position (-2, -2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129716 Jy
! Component: 100  -  total flux cleaned = 0.00183204 Jy
! Component: 150  -  total flux cleaned = 0.00210253 Jy
! Component: 200  -  total flux cleaned = 0.00230613 Jy
! Total flux subtracted in 200 components = 0.00230613 Jy
! Clean residual min=-0.001237 max=0.001151 Jy/beam
! Clean residual mean=-0.000001 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.136564 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 51 components and 0.136564 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.032 mas, bmaj=3.278 mas, bpa=9.596 degrees
! Estimated noise=0.342638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.04456e-05 Jy
! Component: 100  -  total flux cleaned = 2.83667e-05 Jy
! Component: 150  -  total flux cleaned = -5.21503e-05 Jy
! Component: 200  -  total flux cleaned = -0.000123984 Jy
! Total flux subtracted in 200 components = -0.000123984 Jy
! Clean residual min=-0.001088 max=0.001022 Jy/beam
! Clean residual mean=-0.000003 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.13644 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.51631e-05 Jy
! Component: 100  -  total flux cleaned = -0.000125449 Jy
! Component: 150  -  total flux cleaned = -0.000154256 Jy
! Component: 200  -  total flux cleaned = -0.00022242 Jy
! Total flux subtracted in 200 components = -0.00022242 Jy
! Clean residual min=-0.001000 max=0.000926 Jy/beam
! Clean residual mean=-0.000003 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.136218 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 85 components and 0.136218 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.083 mas, bmaj=2.342 mas, bpa=8.33 degrees
! Estimated noise=0.292212 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000257013 Jy
! Component: 100  -  total flux cleaned = 0.000184834 Jy
! Component: 150  -  total flux cleaned = 0.000164761 Jy
! Component: 200  -  total flux cleaned = 4.87719e-05 Jy
! Total flux subtracted in 200 components = 4.87719e-05 Jy
! Clean residual min=-0.000931 max=0.000960 Jy/beam
! Clean residual mean=-0.000001 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.136267 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 105 components and 0.136267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026932Jy  sigma=0.779760
! Fit after  self-cal, rms=0.026928Jy  sigma=0.779602
wmodel /scr/pima/bs241e_uvs/J1119+0410_X_map.mod
! Writing 105 model components to file: /scr/pima/bs241e_uvs/J1119+0410_X_map.mod
wobs /scr/pima/bs241e_uvs/J1119+0410_X_uvs.fits
! Writing UV FITS file: /scr/pima/bs241e_uvs/J1119+0410_X_uvs.fits
wwins /scr/pima/bs241e_uvs/J1119+0410_X_map.win
! wwins: Wrote 5 windows to /scr/pima/bs241e_uvs/J1119+0410_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -4.16664e-05 Jy
! Component: 100  -  total flux cleaned = -0.00016251 Jy
! Component: 150  -  total flux cleaned = -9.25582e-05 Jy
! Component: 200  -  total flux cleaned = 1.1853e-06 Jy
! Component: 250  -  total flux cleaned = 7.91184e-05 Jy
! Component: 300  -  total flux cleaned = 0.000142268 Jy
! Component: 350  -  total flux cleaned = 0.00021591 Jy
! Component: 400  -  total flux cleaned = 0.000299506 Jy
! Component: 450  -  total flux cleaned = 0.00036907 Jy
! Component: 500  -  total flux cleaned = 0.000403141 Jy
! Component: 550  -  total flux cleaned = 0.000436445 Jy
! Component: 600  -  total flux cleaned = 0.000469029 Jy
! Component: 650  -  total flux cleaned = 0.000532702 Jy
! Component: 700  -  total flux cleaned = 0.000594912 Jy
! Component: 750  -  total flux cleaned = 0.00063543 Jy
! Component: 800  -  total flux cleaned = 0.000675464 Jy
! Component: 850  -  total flux cleaned = 0.000734619 Jy
! Component: 900  -  total flux cleaned = 0.000773427 Jy
! Component: 950  -  total flux cleaned = 0.000830159 Jy
! Component: 1000  -  total flux cleaned = 0.000858023 Jy
! Component: 1050  -  total flux cleaned = 0.000894613 Jy
! Component: 1100  -  total flux cleaned = 0.000903567 Jy
! Component: 1150  -  total flux cleaned = 0.000930379 Jy
! Component: 1200  -  total flux cleaned = 0.000947848 Jy
! Component: 1250  -  total flux cleaned = 0.000947814 Jy
! Component: 1300  -  total flux cleaned = 0.000956312 Jy
! Component: 1350  -  total flux cleaned = 0.000981479 Jy
! Component: 1400  -  total flux cleaned = 0.00097302 Jy
! Component: 1450  -  total flux cleaned = 0.000989377 Jy
! Component: 1500  -  total flux cleaned = 0.000989321 Jy
! Component: 1550  -  total flux cleaned = 0.000989341 Jy
! Component: 1600  -  total flux cleaned = 0.00102097 Jy
! Component: 1650  -  total flux cleaned = 0.00102864 Jy
! Component: 1700  -  total flux cleaned = 0.00099766 Jy
! Component: 1750  -  total flux cleaned = 0.00100528 Jy
! Component: 1800  -  total flux cleaned = 0.00101288 Jy
! Component: 1850  -  total flux cleaned = 0.00101291 Jy
! Component: 1900  -  total flux cleaned = 0.000998106 Jy
! Component: 1950  -  total flux cleaned = 0.00101272 Jy
! Component: 2000  -  total flux cleaned = 0.00101273 Jy
! Component: 2050  -  total flux cleaned = 0.00102714 Jy
! Component: 2100  -  total flux cleaned = 0.00102719 Jy
! Component: 2150  -  total flux cleaned = 0.00104841 Jy
! Component: 2200  -  total flux cleaned = 0.00106249 Jy
! Component: 2250  -  total flux cleaned = 0.00106952 Jy
! Component: 2300  -  total flux cleaned = 0.00107636 Jy
! Component: 2350  -  total flux cleaned = 0.00108325 Jy
! Component: 2400  -  total flux cleaned = 0.00110361 Jy
! Component: 2450  -  total flux cleaned = 0.00108334 Jy
! Component: 2500  -  total flux cleaned = 0.00111013 Jy
! Component: 2550  -  total flux cleaned = 0.00111012 Jy
! Component: 2600  -  total flux cleaned = 0.0011102 Jy
! Component: 2650  -  total flux cleaned = 0.0011036 Jy
! Component: 2700  -  total flux cleaned = 0.00110351 Jy
! Component: 2750  -  total flux cleaned = 0.00110359 Jy
! Component: 2800  -  total flux cleaned = 0.00111002 Jy
! Component: 2850  -  total flux cleaned = 0.00113541 Jy
! Component: 2900  -  total flux cleaned = 0.00113534 Jy
! Component: 2950  -  total flux cleaned = 0.00114155 Jy
! Component: 3000  -  total flux cleaned = 0.00114769 Jy
! Component: 3050  -  total flux cleaned = 0.00113531 Jy
! Component: 3100  -  total flux cleaned = 0.00115376 Jy
! Component: 3150  -  total flux cleaned = 0.00114762 Jy
! Component: 3200  -  total flux cleaned = 0.00114161 Jy
! Component: 3250  -  total flux cleaned = 0.00114768 Jy
! Component: 3300  -  total flux cleaned = 0.00114765 Jy
! Component: 3350  -  total flux cleaned = 0.00116555 Jy
! Component: 3400  -  total flux cleaned = 0.00116549 Jy
! Component: 3450  -  total flux cleaned = 0.00116548 Jy
! Component: 3500  -  total flux cleaned = 0.00118311 Jy
! Component: 3550  -  total flux cleaned = 0.00123551 Jy
! Component: 3600  -  total flux cleaned = 0.00122968 Jy
! Component: 3650  -  total flux cleaned = 0.0012527 Jy
! Component: 3700  -  total flux cleaned = 0.00124124 Jy
! Component: 3750  -  total flux cleaned = 0.00126405 Jy
! Component: 3800  -  total flux cleaned = 0.00128667 Jy
! Component: 3850  -  total flux cleaned = 0.00129796 Jy
! Component: 3900  -  total flux cleaned = 0.00129803 Jy
! Component: 3950  -  total flux cleaned = 0.00131484 Jy
! Component: 4000  -  total flux cleaned = 0.0013537 Jy
! Component: 4050  -  total flux cleaned = 0.00134819 Jy
! Total flux subtracted in 4096 components = 0.00137571 Jy
! Clean residual min=-0.000335 max=0.000316 Jy/beam
! Clean residual mean=-0.000000 rms=0.000096 Jy/beam
! Combined flux in latest and established models = 0.137642 Jy
keep
! Adding 271 model components to the UV plane model.
! The established model now contains 376 components and 0.137642 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bs241e_uvs/J1119+0410_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.083 x 2.342 at 8.33 degrees (North through East)
! Clean map  min=-0.0006308  max=0.11636 Jy/beam
! Writing clean map to FITS file: /scr/pima/bs241e_uvs/J1119+0410_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.116356 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.59165e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.2473 0.2473 0.494601 0.989201 1.9784 3.9568 7.91361 15.8272 31.6544 63.3089
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.116 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1213.1 
quit
! Quitting program
! Log file /scr/pima/bs241e_uvs/J1119+0410_X_uvs.log closed on Fri May 15 09:15:24 2015