! Started logfile: /scr/pima/bs241d_uvs/J0826-2230_X_uvs.log on Tue Mar 24 08:19:57 2015
obs /scr/pima/bs241d_uvs/J0826-2230_X_uva.fits
! Reading UV FITS file: /scr/pima/bs241d_uvs/J0826-2230_X_uva.fits
! AN table 1: 29 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.721264 visibilities/baseline/integration-bin.
! Found source: J0826-2230
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 0 lines of history.
! 
! Reading 6024 visibilities.
select RR
! Polarization RR is unavailable.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bs241d_uvs/J0826-2230_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.185187Jy  sigma=32.991502
! Fit after  self-cal, rms=0.390125Jy  sigma=10.841553
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7499 mas, bmaj=1.973 mas, bpa=-7.258 degrees
! Estimated noise=0.513674 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.457719 Jy
! Component: 100  -  total flux cleaned = 0.600739 Jy
! Total flux subtracted in 100 components = 0.600739 Jy
! Clean residual min=-0.031284 max=0.067469 Jy/beam
! Clean residual mean=-0.000122 rms=0.010585 Jy/beam
! Combined flux in latest and established models = 0.600739 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.600739 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.152008Jy  sigma=4.283415
! Fit after  self-cal, rms=0.151924Jy  sigma=4.281074
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0776255 Jy
! Component: 100  -  total flux cleaned = 0.123535 Jy
! Total flux subtracted in 100 components = 0.123535 Jy
! Clean residual min=-0.020642 max=0.024465 Jy/beam
! Clean residual mean=-0.000064 rms=0.005337 Jy/beam
! Combined flux in latest and established models = 0.724274 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 25 components and 0.724274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086787Jy  sigma=2.411949
! Fit after  self-cal, rms=0.086734Jy  sigma=2.410515
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9495 mas, bmaj=2.369 mas, bpa=-4.893 degrees
! Estimated noise=0.331113 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0372908 Jy
! Component: 100  -  total flux cleaned = 0.0566679 Jy
! Component: 150  -  total flux cleaned = 0.0678915 Jy
! Component: 200  -  total flux cleaned = 0.0746995 Jy
! Total flux subtracted in 200 components = 0.0746995 Jy
! Clean residual min=-0.022301 max=0.019591 Jy/beam
! Clean residual mean=-0.000081 rms=0.005105 Jy/beam
! Combined flux in latest and established models = 0.798973 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 51 components and 0.798973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.069586Jy  sigma=1.948202
! Fit after  self-cal, rms=0.069520Jy  sigma=1.946700
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9495 x 2.369 at -4.893 degrees (North through East)
! Clean map  min=-0.021119  max=0.62912 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     HN        0.95     KP        0.98     LA        0.99     
!   MK        0.97     NL        0.98     OV        0.93     PT        0.90     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     HN        0.93     KP        1.03     LA        0.95     
!   MK        0.98     NL        1.01     OV        0.93     PT        0.92     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     HN        0.93     KP        1.06     LA        0.90     
!   MK        1.00     NL        1.02     OV        0.96     PT        0.94     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     HN        1.03     KP        0.94     LA        0.99     
!   MK        1.00     NL        1.05     OV        0.99     PT        0.94     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     HN        1.05     KP        1.14     LA        1.00     
!   MK        1.03     NL        0.99     OV        0.92     PT        0.92     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     HN        1.11     KP        1.16     LA        1.02     
!   MK        1.03     NL        1.02     OV        1.01     PT        0.94     
!   SC        1.04     
! 
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     HN        1.04     KP        1.18     LA        0.99     
!   MK        1.01     NL        1.01     OV        1.05     PT        0.88     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     HN        1.04     KP        1.10     LA        0.95     
!   MK        1.00     NL        0.99     OV        0.95     PT        0.88     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.069520Jy  sigma=1.946700
! Fit after  self-cal, rms=0.028888Jy  sigma=0.703220
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9478 mas, bmaj=2.394 mas, bpa=-5.131 degrees
! Estimated noise=0.333014 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00315269 Jy
! Component: 100  -  total flux cleaned = 0.00355046 Jy
! Component: 150  -  total flux cleaned = 0.00337709 Jy
! Component: 200  -  total flux cleaned = 0.00322446 Jy
! Total flux subtracted in 200 components = 0.00322446 Jy
! Clean residual min=-0.002387 max=0.002477 Jy/beam
! Clean residual mean=-0.000012 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.802198 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 65 components and 0.802197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028446Jy  sigma=0.689048
! Fit after  self-cal, rms=0.028439Jy  sigma=0.688461
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028439Jy  sigma=0.688461
! Fit after  self-cal, rms=0.028442Jy  sigma=0.687920
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9478 mas, bmaj=2.394 mas, bpa=-5.106 degrees
! Estimated noise=0.333165 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000958544 Jy
! Component: 100  -  total flux cleaned = 0.000866649 Jy
! Component: 150  -  total flux cleaned = 0.000785995 Jy
! Component: 200  -  total flux cleaned = 0.000678157 Jy
! Total flux subtracted in 200 components = 0.000678157 Jy
! Clean residual min=-0.002159 max=0.002153 Jy/beam
! Clean residual mean=-0.000011 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.802876 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 71 components and 0.802876 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028317Jy  sigma=0.684284
! Fit after  self-cal, rms=0.028310Jy  sigma=0.684155
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000174546 Jy
! Component: 100  -  total flux cleaned = 8.13385e-05 Jy
! Component: 150  -  total flux cleaned = 5.29801e-05 Jy
! Component: 200  -  total flux cleaned = 5.27836e-05 Jy
! Total flux subtracted in 200 components = 5.27836e-05 Jy
! Clean residual min=-0.002121 max=0.002023 Jy/beam
! Clean residual mean=-0.000010 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.802928 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 75 components and 0.802928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028249Jy  sigma=0.682482
! Fit after  self-cal, rms=0.028244Jy  sigma=0.682424
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028244Jy  sigma=0.682424
! Fit after  self-cal, rms=0.028245Jy  sigma=0.682180
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9477 mas, bmaj=2.394 mas, bpa=-5.082 degrees
! Estimated noise=0.333157 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000508005 Jy
! Component: 100  -  total flux cleaned = 0.000456792 Jy
! Component: 150  -  total flux cleaned = 0.000456301 Jy
! Component: 200  -  total flux cleaned = 0.000479606 Jy
! Total flux subtracted in 200 components = 0.000479606 Jy
! Clean residual min=-0.001951 max=0.001894 Jy/beam
! Clean residual mean=-0.000009 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.803408 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 78 components and 0.803408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028202Jy  sigma=0.680893
! Fit after  self-cal, rms=0.028198Jy  sigma=0.680863
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.67422e-05 Jy
! Component: 100  -  total flux cleaned = 7.63713e-05 Jy
! Component: 150  -  total flux cleaned = 7.672e-05 Jy
! Component: 200  -  total flux cleaned = 9.55605e-05 Jy
! Total flux subtracted in 200 components = 9.55605e-05 Jy
! Clean residual min=-0.001904 max=0.001870 Jy/beam
! Clean residual mean=-0.000009 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.803504 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 87 components and 0.803504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028173Jy  sigma=0.680134
! Fit after  self-cal, rms=0.028171Jy  sigma=0.680120
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028171Jy  sigma=0.680120
! Fit after  self-cal, rms=0.028171Jy  sigma=0.680017
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.035 mas, bmaj=4.516 mas, bpa=-5.204 degrees
! Estimated noise=0.420285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000424563 Jy
! Component: 100  -  total flux cleaned = 0.000611555 Jy
! Component: 150  -  total flux cleaned = 0.000775152 Jy
! Component: 200  -  total flux cleaned = 0.000823104 Jy
! Total flux subtracted in 200 components = 0.000823104 Jy
! Clean residual min=-0.002449 max=0.001958 Jy/beam
! Clean residual mean=-0.000014 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.804327 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 91 components and 0.804327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028161Jy  sigma=0.679285
! Fit after  self-cal, rms=0.028142Jy  sigma=0.679014
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.91365e-05 Jy
! Component: 100  -  total flux cleaned = 2.20139e-05 Jy
! Component: 150  -  total flux cleaned = -1.25087e-06 Jy
! Component: 200  -  total flux cleaned = 5.83628e-05 Jy
! Total flux subtracted in 200 components = 5.83628e-05 Jy
! Clean residual min=-0.002408 max=0.001812 Jy/beam
! Clean residual mean=-0.000014 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.804385 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 93 components and 0.804385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028152Jy  sigma=0.678945
! Fit after  self-cal, rms=0.028137Jy  sigma=0.678772
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9477 mas, bmaj=2.394 mas, bpa=-5.059 degrees
! Estimated noise=0.333124 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9477 x 2.394 at -5.059 degrees (North through East)
! Clean map  min=-0.0018171  max=0.6278 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028137Jy  sigma=0.678772
! Fit after  self-cal, rms=0.026308Jy  sigma=0.627769
! Inverting map and beam 
! Estimated beam: bmin=0.9479 mas, bmaj=2.394 mas, bpa=-5.003 degrees
! Estimated noise=0.333224 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000325367 Jy
! Component: 100  -  total flux cleaned = -0.000361735 Jy
! Component: 150  -  total flux cleaned = -0.000394884 Jy
! Component: 200  -  total flux cleaned = -0.00041036 Jy
! Total flux subtracted in 200 components = -0.00041036 Jy
! Clean residual min=-0.001780 max=0.001624 Jy/beam
! Clean residual mean=-0.000007 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.803975 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 105 components and 0.803975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026282Jy  sigma=0.627193
! Fit after  self-cal, rms=0.026281Jy  sigma=0.627179
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.87146e-05 Jy
! Component: 100  -  total flux cleaned = -4.41941e-05 Jy
! Component: 150  -  total flux cleaned = -4.41973e-05 Jy
! Component: 200  -  total flux cleaned = -3.08171e-05 Jy
! Total flux subtracted in 200 components = -3.08171e-05 Jy
! Clean residual min=-0.001758 max=0.001614 Jy/beam
! Clean residual mean=-0.000007 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.803944 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 109 components and 0.803944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026266Jy  sigma=0.626823
! Fit after  self-cal, rms=0.026265Jy  sigma=0.626813
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026265Jy  sigma=0.626813
! Fit after  self-cal, rms=0.026264Jy  sigma=0.626745
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7521 mas, bmaj=1.977 mas, bpa=-7.091 degrees
! Estimated noise=0.512797 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.454612 Jy
! Component: 100  -  total flux cleaned = 0.596522 Jy
! Component: 150  -  total flux cleaned = 0.672926 Jy
! Component: 200  -  total flux cleaned = 0.717925 Jy
! Total flux subtracted in 200 components = 0.717925 Jy
! Clean residual min=-0.009983 max=0.023142 Jy/beam
! Clean residual mean=-0.000044 rms=0.003695 Jy/beam
! Combined flux in latest and established models = 0.717925 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.717925 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9479 mas, bmaj=2.394 mas, bpa=-4.985 degrees
! Estimated noise=0.333192 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0384401 Jy
! Component: 100  -  total flux cleaned = 0.0575035 Jy
! Component: 150  -  total flux cleaned = 0.0676755 Jy
! Component: 200  -  total flux cleaned = 0.0734122 Jy
! Total flux subtracted in 200 components = 0.0734122 Jy
! Clean residual min=-0.002898 max=0.004234 Jy/beam
! Clean residual mean=-0.000018 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.791337 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 53 components and 0.791337 Jy
! Inverting map 
! Added new window around map position (-1.2, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0041043 Jy
! Component: 100  -  total flux cleaned = 0.00679571 Jy
! Component: 150  -  total flux cleaned = 0.00862595 Jy
! Component: 200  -  total flux cleaned = 0.00942108 Jy
! Total flux subtracted in 200 components = 0.00942108 Jy
! Clean residual min=-0.002135 max=0.002577 Jy/beam
! Clean residual mean=-0.000010 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.800758 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 70 components and 0.800758 Jy
! Inverting map 
! Added new window around map position (1.6, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00143205 Jy
! Component: 100  -  total flux cleaned = 0.00176865 Jy
! Component: 150  -  total flux cleaned = 0.00206384 Jy
! Component: 200  -  total flux cleaned = 0.00219559 Jy
! Total flux subtracted in 200 components = 0.00219559 Jy
! Clean residual min=-0.001808 max=0.001699 Jy/beam
! Clean residual mean=-0.000007 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.802953 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 86 components and 0.802953 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.036 mas, bmaj=4.514 mas, bpa=-5.163 degrees
! Estimated noise=0.420323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000855629 Jy
! Component: 100  -  total flux cleaned = 0.00110261 Jy
! Component: 150  -  total flux cleaned = 0.00121927 Jy
! Component: 200  -  total flux cleaned = 0.00130247 Jy
! Total flux subtracted in 200 components = 0.00130247 Jy
! Clean residual min=-0.002201 max=0.001610 Jy/beam
! Clean residual mean=-0.000011 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.804256 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.68372e-05 Jy
! Component: 100  -  total flux cleaned = 7.50399e-05 Jy
! Component: 150  -  total flux cleaned = 0.000109315 Jy
! Component: 200  -  total flux cleaned = 0.000157692 Jy
! Total flux subtracted in 200 components = 0.000157692 Jy
! Clean residual min=-0.002141 max=0.001588 Jy/beam
! Clean residual mean=-0.000011 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.804414 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 110 components and 0.804414 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9479 mas, bmaj=2.394 mas, bpa=-4.985 degrees
! Estimated noise=0.333192 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000347283 Jy
! Component: 100  -  total flux cleaned = -0.000411615 Jy
! Component: 150  -  total flux cleaned = -0.000411937 Jy
! Component: 200  -  total flux cleaned = -0.000411629 Jy
! Total flux subtracted in 200 components = -0.000411629 Jy
! Clean residual min=-0.001619 max=0.001416 Jy/beam
! Clean residual mean=-0.000006 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.804002 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 121 components and 0.804002 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026089Jy  sigma=0.622201
! Fit after  self-cal, rms=0.026076Jy  sigma=0.621941
wmodel /scr/pima/bs241d_uvs/J0826-2230_X_map.mod
! Writing 121 model components to file: /scr/pima/bs241d_uvs/J0826-2230_X_map.mod
wobs /scr/pima/bs241d_uvs/J0826-2230_X_uvs.fits
! Writing UV FITS file: /scr/pima/bs241d_uvs/J0826-2230_X_uvs.fits
wwins /scr/pima/bs241d_uvs/J0826-2230_X_map.win
! wwins: Wrote 4 windows to /scr/pima/bs241d_uvs/J0826-2230_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000559267 Jy
! Component: 100  -  total flux cleaned = -0.000812809 Jy
! Component: 150  -  total flux cleaned = -0.000929442 Jy
! Component: 200  -  total flux cleaned = -0.000951059 Jy
! Component: 250  -  total flux cleaned = -0.000871558 Jy
! Component: 300  -  total flux cleaned = -0.000815282 Jy
! Component: 350  -  total flux cleaned = -0.000744676 Jy
! Component: 400  -  total flux cleaned = -0.00076169 Jy
! Component: 450  -  total flux cleaned = -0.000728256 Jy
! Component: 500  -  total flux cleaned = -0.000680594 Jy
! Component: 550  -  total flux cleaned = -0.000711655 Jy
! Component: 600  -  total flux cleaned = -0.000726025 Jy
! Component: 650  -  total flux cleaned = -0.000725824 Jy
! Component: 700  -  total flux cleaned = -0.000711956 Jy
! Component: 750  -  total flux cleaned = -0.000725917 Jy
! Component: 800  -  total flux cleaned = -0.000739297 Jy
! Component: 850  -  total flux cleaned = -0.000777805 Jy
! Component: 900  -  total flux cleaned = -0.000764983 Jy
! Component: 950  -  total flux cleaned = -0.000765168 Jy
! Component: 1000  -  total flux cleaned = -0.000777007 Jy
! Component: 1050  -  total flux cleaned = -0.000777105 Jy
! Component: 1100  -  total flux cleaned = -0.000777048 Jy
! Component: 1150  -  total flux cleaned = -0.000754654 Jy
! Component: 1200  -  total flux cleaned = -0.000743686 Jy
! Component: 1250  -  total flux cleaned = -0.000711728 Jy
! Component: 1300  -  total flux cleaned = -0.00069085 Jy
! Component: 1350  -  total flux cleaned = -0.000649829 Jy
! Component: 1400  -  total flux cleaned = -0.00061974 Jy
! Component: 1450  -  total flux cleaned = -0.000609933 Jy
! Component: 1500  -  total flux cleaned = -0.000619447 Jy
! Component: 1550  -  total flux cleaned = -0.000609871 Jy
! Component: 1600  -  total flux cleaned = -0.000591082 Jy
! Component: 1650  -  total flux cleaned = -0.000590919 Jy
! Component: 1700  -  total flux cleaned = -0.000563615 Jy
! Component: 1750  -  total flux cleaned = -0.000527744 Jy
! Component: 1800  -  total flux cleaned = -0.000527885 Jy
! Component: 1850  -  total flux cleaned = -0.000493248 Jy
! Component: 1900  -  total flux cleaned = -0.000450477 Jy
! Component: 1950  -  total flux cleaned = -0.000425218 Jy
! Component: 2000  -  total flux cleaned = -0.000383713 Jy
! Component: 2050  -  total flux cleaned = -0.000351005 Jy
! Component: 2100  -  total flux cleaned = -0.000367054 Jy
! Component: 2150  -  total flux cleaned = -0.000342929 Jy
! Component: 2200  -  total flux cleaned = -0.000287607 Jy
! Component: 2250  -  total flux cleaned = -0.000272047 Jy
! Component: 2300  -  total flux cleaned = -0.00024884 Jy
! Component: 2350  -  total flux cleaned = -0.000210881 Jy
! Component: 2400  -  total flux cleaned = -0.000195813 Jy
! Component: 2450  -  total flux cleaned = -0.000151244 Jy
! Component: 2500  -  total flux cleaned = -0.00012193 Jy
! Component: 2550  -  total flux cleaned = -9.2947e-05 Jy
! Component: 2600  -  total flux cleaned = -5.00325e-05 Jy
! Component: 2650  -  total flux cleaned = -7.14269e-05 Jy
! Component: 2700  -  total flux cleaned = -3.63252e-05 Jy
! Component: 2750  -  total flux cleaned = -2.94336e-05 Jy
! Component: 2800  -  total flux cleaned = -5.00103e-05 Jy
! Component: 2850  -  total flux cleaned = -2.27535e-05 Jy
! Component: 2900  -  total flux cleaned = -2.27803e-05 Jy
! Component: 2950  -  total flux cleaned = -2.2733e-05 Jy
! Component: 3000  -  total flux cleaned = -2.93941e-05 Jy
! Component: 3050  -  total flux cleaned = -4.90272e-05 Jy
! Component: 3100  -  total flux cleaned = -6.1906e-05 Jy
! Component: 3150  -  total flux cleaned = -6.19086e-05 Jy
! Component: 3200  -  total flux cleaned = -6.82436e-05 Jy
! Component: 3250  -  total flux cleaned = -8.70821e-05 Jy
! Component: 3300  -  total flux cleaned = -9.95419e-05 Jy
! Component: 3350  -  total flux cleaned = -0.000111794 Jy
! Component: 3400  -  total flux cleaned = -0.000117941 Jy
! Component: 3450  -  total flux cleaned = -0.000142061 Jy
! Component: 3500  -  total flux cleaned = -0.000153968 Jy
! Component: 3550  -  total flux cleaned = -0.000171766 Jy
! Component: 3600  -  total flux cleaned = -0.000213078 Jy
! Component: 3650  -  total flux cleaned = -0.000207227 Jy
! Component: 3700  -  total flux cleaned = -0.000230515 Jy
! Component: 3750  -  total flux cleaned = -0.000270941 Jy
! Component: 3800  -  total flux cleaned = -0.000305371 Jy
! Component: 3850  -  total flux cleaned = -0.000316758 Jy
! Component: 3900  -  total flux cleaned = -0.000350816 Jy
! Component: 3950  -  total flux cleaned = -0.000373396 Jy
! Component: 4000  -  total flux cleaned = -0.000412673 Jy
! Component: 4050  -  total flux cleaned = -0.000440599 Jy
! Total flux subtracted in 4096 components = -0.000462839 Jy
! Clean residual min=-0.000344 max=0.000351 Jy/beam
! Clean residual mean=-0.000001 rms=0.000092 Jy/beam
! Combined flux in latest and established models = 0.803539 Jy
keep
! Adding 256 model components to the UV plane model.
! The established model now contains 377 components and 0.803539 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bs241d_uvs/J0826-2230_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9479 x 2.394 at -4.985 degrees (North through East)
! Clean map  min=-0.0013674  max=0.63096 Jy/beam
! Writing clean map to FITS file: /scr/pima/bs241d_uvs/J0826-2230_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.630962 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.02474e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0429094 0.0429094 0.0858188 0.171638 0.343275 0.686551 1.3731 2.7462 5.49241 10.9848 21.9696 43.9392 87.8785
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.63 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  6991.47 
quit
! Quitting program
! Log file /scr/pima/bs241d_uvs/J0826-2230_X_uvs.log closed on Tue Mar 24 08:20:02 2015