! Started logfile: /scr/pima/bs241d_uvs/J0725-3530_X_uvs.log on Tue Mar 24 08:19:11 2015
obs /scr/pima/bs241d_uvs/J0725-3530_X_uva.fits
! Reading UV FITS file: /scr/pima/bs241d_uvs/J0725-3530_X_uva.fits
! AN table 1: 59 integrations on 10 of 10 possible baselines.
! AN table 2: 66 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.558228 visibilities/baseline/integration-bin.
! Found source: J0725-3530
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 0 lines of history.
! 
! Reading 7056 visibilities.
select RR
! Polarization RR is unavailable.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bs241d_uvs/J0725-3530_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 118 telescope corrections were flagged in sub-array 1.
!  A total of 66 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 118 telescope corrections were flagged in sub-array 1.
!  A total of 66 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 118 telescope corrections were flagged in sub-array 1.
!  A total of 66 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 118 telescope corrections were flagged in sub-array 1.
!  A total of 66 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 118 telescope corrections were flagged in sub-array 1.
!  A total of 66 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 118 telescope corrections were flagged in sub-array 1.
!  A total of 66 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 118 telescope corrections were flagged in sub-array 1.
!  A total of 66 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 118 telescope corrections were flagged in sub-array 1.
!  A total of 66 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000264Jy  sigma=25.109284
! Fit after  self-cal, rms=0.981026Jy  sigma=24.701229
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.207 mas, bmaj=14.23 mas, bpa=16.32 degrees
! Estimated noise=0.451189 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0146986 Jy
! Component: 100  -  total flux cleaned = 0.0180287 Jy
! Total flux subtracted in 100 components = 0.0180287 Jy
! Clean residual min=-0.001121 max=0.001230 Jy/beam
! Clean residual mean=-0.000014 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.0180287 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0180287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023913Jy  sigma=0.570628
! Fit after  self-cal, rms=0.022301Jy  sigma=0.530478
! Inverting map 
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00256992 Jy
! Component: 100  -  total flux cleaned = 0.00334386 Jy
! Total flux subtracted in 100 components = 0.00334386 Jy
! Clean residual min=-0.001187 max=0.000768 Jy/beam
! Clean residual mean=-0.000001 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.0213725 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 0.0213726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021991Jy  sigma=0.524053
! Fit after  self-cal, rms=0.021999Jy  sigma=0.523990
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.592 mas, bmaj=13.54 mas, bpa=14.21 degrees
! Estimated noise=0.377716 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.38508e-05 Jy
! Component: 100  -  total flux cleaned = -4.56956e-05 Jy
! Component: 150  -  total flux cleaned = -4.62195e-05 Jy
! Component: 200  -  total flux cleaned = -3.22026e-05 Jy
! Total flux subtracted in 200 components = -3.22026e-05 Jy
! Clean residual min=-0.001060 max=0.000778 Jy/beam
! Clean residual mean=-0.000003 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.0213403 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 51 components and 0.0213403 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021970Jy  sigma=0.523504
! Fit after  self-cal, rms=0.021954Jy  sigma=0.523453
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.592 x 13.54 at 14.21 degrees (North through East)
! Clean map  min=-0.0010884  max=0.020803 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 177 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    OV        0.00*    PT        0.00*    
!   SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.92     KP        1.07     LA        1.10     MK        1.00*    
!   OV        0.94     PT        0.92     
! 
! 
! Correcting IF 2.
!  A total of 177 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    OV        0.00*    PT        0.00*    
!   SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     KP        0.99     LA        0.90     MK        1.00*    
!   OV        0.88     PT        1.13     
! 
! 
! Correcting IF 3.
!  A total of 177 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    OV        0.00*    PT        0.00*    
!   SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 177 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    OV        0.00*    PT        0.00*    
!   SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 5.
!  A total of 177 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    OV        0.00*    PT        0.00*    
!   SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 6.
!  A total of 177 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    OV        0.00*    PT        0.00*    
!   SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 177 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    OV        0.00*    PT        0.00*    
!   SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     KP        1.10     LA        1.07     MK        1.00*    
!   OV        0.96     PT        0.90     
! 
! 
! Correcting IF 8.
!  A total of 177 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   KP        0.00*    LA        0.00*    OV        0.00*    PT        0.00*    
!   SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.85     KP        1.11     LA        0.95     MK        1.00*    
!   OV        0.98     PT        0.93     
! 
! 
! Fit before self-cal, rms=0.021954Jy  sigma=0.523453
! Fit after  self-cal, rms=0.022318Jy  sigma=0.537527
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.086 mas, bmaj=20.16 mas, bpa=18.71 degrees
! Estimated noise=0.433445 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000588087 Jy
! Component: 100  -  total flux cleaned = -0.000593504 Jy
! Component: 150  -  total flux cleaned = -0.000560589 Jy
! Component: 200  -  total flux cleaned = -0.00053038 Jy
! Total flux subtracted in 200 components = -0.00053038 Jy
! Clean residual min=-0.000665 max=0.000564 Jy/beam
! Clean residual mean=-0.000006 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.02081 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 68 components and 0.02081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022304Jy  sigma=0.537093
! Fit after  self-cal, rms=0.022265Jy  sigma=0.536649
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022265Jy  sigma=0.536649
! Fit after  self-cal, rms=0.022209Jy  sigma=0.536181
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.08 mas, bmaj=20.18 mas, bpa=18.65 degrees
! Estimated noise=0.432007 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.15073e-05 Jy
! Component: 100  -  total flux cleaned = -2.65077e-05 Jy
! Component: 150  -  total flux cleaned = 7.3804e-06 Jy
! Component: 200  -  total flux cleaned = 3.24677e-05 Jy
! Total flux subtracted in 200 components = 3.24677e-05 Jy
! Clean residual min=-0.000621 max=0.000483 Jy/beam
! Clean residual mean=-0.000005 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0208424 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 92 components and 0.0208424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022204Jy  sigma=0.536058
! Fit after  self-cal, rms=0.022197Jy  sigma=0.535924
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.20771e-06 Jy
! Component: 100  -  total flux cleaned = 4.87909e-05 Jy
! Component: 150  -  total flux cleaned = 8.98742e-05 Jy
! Component: 200  -  total flux cleaned = 0.000121864 Jy
! Total flux subtracted in 200 components = 0.000121864 Jy
! Clean residual min=-0.000632 max=0.000492 Jy/beam
! Clean residual mean=-0.000005 rms=0.000177 Jy/beam
! Combined flux in latest and established models = 0.0209643 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 101 components and 0.0209643 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022193Jy  sigma=0.535816
! Fit after  self-cal, rms=0.022184Jy  sigma=0.535802
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022184Jy  sigma=0.535802
! Fit after  self-cal, rms=0.022174Jy  sigma=0.535770
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.079 mas, bmaj=20.2 mas, bpa=18.6 degrees
! Estimated noise=0.430959 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.05589e-05 Jy
! Component: 100  -  total flux cleaned = 2.37412e-06 Jy
! Component: 150  -  total flux cleaned = 2.69387e-05 Jy
! Component: 200  -  total flux cleaned = 5.01878e-05 Jy
! Total flux subtracted in 200 components = 5.01878e-05 Jy
! Clean residual min=-0.000603 max=0.000459 Jy/beam
! Clean residual mean=-0.000004 rms=0.000171 Jy/beam
! Combined flux in latest and established models = 0.0210145 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 103 components and 0.0210145 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022170Jy  sigma=0.535680
! Fit after  self-cal, rms=0.022167Jy  sigma=0.535658
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.10725e-05 Jy
! Component: 100  -  total flux cleaned = 5.77069e-05 Jy
! Component: 150  -  total flux cleaned = 9.16977e-05 Jy
! Component: 200  -  total flux cleaned = 0.000118293 Jy
! Total flux subtracted in 200 components = 0.000118293 Jy
! Clean residual min=-0.000589 max=0.000444 Jy/beam
! Clean residual mean=-0.000003 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.0211328 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 107 components and 0.0211328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022164Jy  sigma=0.535592
! Fit after  self-cal, rms=0.022158Jy  sigma=0.535583
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022158Jy  sigma=0.535583
! Fit after  self-cal, rms=0.022081Jy  sigma=0.535381
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.225 mas, bmaj=20.31 mas, bpa=18.52 degrees
! Estimated noise=0.429872 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.87838e-06 Jy
! Component: 100  -  total flux cleaned = 3.82756e-05 Jy
! Component: 150  -  total flux cleaned = 7.10614e-05 Jy
! Component: 200  -  total flux cleaned = 9.70852e-05 Jy
! Total flux subtracted in 200 components = 9.70852e-05 Jy
! Clean residual min=-0.000509 max=0.000429 Jy/beam
! Clean residual mean=-0.000001 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.0212299 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 120 components and 0.0212299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022079Jy  sigma=0.535328
! Fit after  self-cal, rms=0.022070Jy  sigma=0.535107
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.69818e-05 Jy
! Component: 100  -  total flux cleaned = 8.17374e-05 Jy
! Component: 150  -  total flux cleaned = 0.00010933 Jy
! Component: 200  -  total flux cleaned = 0.000126371 Jy
! Total flux subtracted in 200 components = 0.000126371 Jy
! Clean residual min=-0.000508 max=0.000428 Jy/beam
! Clean residual mean=0.000000 rms=0.000145 Jy/beam
! Combined flux in latest and established models = 0.0213562 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 124 components and 0.0213562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022068Jy  sigma=0.535060
! Fit after  self-cal, rms=0.022064Jy  sigma=0.535055
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.08 mas, bmaj=20.18 mas, bpa=18.65 degrees
! Estimated noise=0.429602 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.08 x 20.18 at 18.65 degrees (North through East)
! Clean map  min=-0.0011885  max=0.020641 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.758 mas, bmaj=21.33 mas, bpa=19.18 degrees
! Estimated noise=0.514845 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0153404 Jy
! Component: 100  -  total flux cleaned = 0.0187089 Jy
! Component: 150  -  total flux cleaned = 0.0191282 Jy
! Component: 200  -  total flux cleaned = 0.0193826 Jy
! Total flux subtracted in 200 components = 0.0193826 Jy
! Clean residual min=-0.001307 max=0.000922 Jy/beam
! Clean residual mean=-0.000018 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.0193826 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0193826 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.08 mas, bmaj=20.18 mas, bpa=18.65 degrees
! Estimated noise=0.429602 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000322869 Jy
! Component: 100  -  total flux cleaned = 0.000296608 Jy
! Component: 150  -  total flux cleaned = 0.000315816 Jy
! Component: 200  -  total flux cleaned = 0.000349787 Jy
! Total flux subtracted in 200 components = 0.000349787 Jy
! Clean residual min=-0.001067 max=0.001063 Jy/beam
! Clean residual mean=-0.000023 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.0197324 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 37 components and 0.0197324 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.225 mas, bmaj=20.31 mas, bpa=18.52 degrees
! Estimated noise=0.429872 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.70384e-05 Jy
! Component: 100  -  total flux cleaned = 0.000180686 Jy
! Component: 150  -  total flux cleaned = 0.00025303 Jy
! Component: 200  -  total flux cleaned = 0.000308008 Jy
! Total flux subtracted in 200 components = 0.000308008 Jy
! Clean residual min=-0.000928 max=0.000908 Jy/beam
! Clean residual mean=-0.000019 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.0200404 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.53265e-05 Jy
! Component: 100  -  total flux cleaned = 0.000126358 Jy
! Component: 150  -  total flux cleaned = 0.000184025 Jy
! Component: 200  -  total flux cleaned = 0.000238312 Jy
! Total flux subtracted in 200 components = 0.000238312 Jy
! Clean residual min=-0.000821 max=0.000775 Jy/beam
! Clean residual mean=-0.000015 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.0202787 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 63 components and 0.0202787 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.08 mas, bmaj=20.18 mas, bpa=18.65 degrees
! Estimated noise=0.429602 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.07063e-05 Jy
! Component: 100  -  total flux cleaned = 8.89193e-05 Jy
! Component: 150  -  total flux cleaned = 0.0001248 Jy
! Component: 200  -  total flux cleaned = 0.000167609 Jy
! Total flux subtracted in 200 components = 0.000167609 Jy
! Clean residual min=-0.000742 max=0.000655 Jy/beam
! Clean residual mean=-0.000012 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.0204463 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 76 components and 0.0204463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022078Jy  sigma=0.535404
! Fit after  self-cal, rms=0.022089Jy  sigma=0.535355
wmodel /scr/pima/bs241d_uvs/J0725-3530_X_map.mod
! Writing 76 model components to file: /scr/pima/bs241d_uvs/J0725-3530_X_map.mod
wobs /scr/pima/bs241d_uvs/J0725-3530_X_uvs.fits
! Writing UV FITS file: /scr/pima/bs241d_uvs/J0725-3530_X_uvs.fits
wwins /scr/pima/bs241d_uvs/J0725-3530_X_map.win
! wwins: Wrote 1 windows to /scr/pima/bs241d_uvs/J0725-3530_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.0001701 Jy
! Component: 100  -  total flux cleaned = -0.000243098 Jy
! Component: 150  -  total flux cleaned = -0.000291681 Jy
! Component: 200  -  total flux cleaned = -0.000328192 Jy
! Component: 250  -  total flux cleaned = -0.000350529 Jy
! Component: 300  -  total flux cleaned = -0.000335873 Jy
! Component: 350  -  total flux cleaned = -0.000322346 Jy
! Component: 400  -  total flux cleaned = -0.000301535 Jy
! Component: 450  -  total flux cleaned = -0.000301649 Jy
! Component: 500  -  total flux cleaned = -0.000290798 Jy
! Component: 550  -  total flux cleaned = -0.000294253 Jy
! Component: 600  -  total flux cleaned = -0.000297598 Jy
! Component: 650  -  total flux cleaned = -0.00029758 Jy
! Component: 700  -  total flux cleaned = -0.000288031 Jy
! Component: 750  -  total flux cleaned = -0.000278576 Jy
! Component: 800  -  total flux cleaned = -0.000275441 Jy
! Component: 850  -  total flux cleaned = -0.000275459 Jy
! Component: 900  -  total flux cleaned = -0.000269149 Jy
! Component: 950  -  total flux cleaned = -0.000272329 Jy
! Component: 1000  -  total flux cleaned = -0.000269149 Jy
! Component: 1050  -  total flux cleaned = -0.00026598 Jy
! Component: 1100  -  total flux cleaned = -0.000265983 Jy
! Component: 1150  -  total flux cleaned = -0.00027246 Jy
! Component: 1200  -  total flux cleaned = -0.000272429 Jy
! Component: 1250  -  total flux cleaned = -0.000275725 Jy
! Component: 1300  -  total flux cleaned = -0.000275759 Jy
! Component: 1350  -  total flux cleaned = -0.000279094 Jy
! Component: 1400  -  total flux cleaned = -0.000285863 Jy
! Component: 1450  -  total flux cleaned = -0.000285936 Jy
! Component: 1500  -  total flux cleaned = -0.000282498 Jy
! Component: 1550  -  total flux cleaned = -0.000282436 Jy
! Component: 1600  -  total flux cleaned = -0.000275264 Jy
! Component: 1650  -  total flux cleaned = -0.000271596 Jy
! Component: 1700  -  total flux cleaned = -0.000264067 Jy
! Component: 1750  -  total flux cleaned = -0.000263994 Jy
! Component: 1800  -  total flux cleaned = -0.000263999 Jy
! Component: 1850  -  total flux cleaned = -0.000264054 Jy
! Component: 1900  -  total flux cleaned = -0.000272384 Jy
! Component: 1950  -  total flux cleaned = -0.000272395 Jy
! Component: 2000  -  total flux cleaned = -0.000281107 Jy
! Component: 2050  -  total flux cleaned = -0.000285719 Jy
! Component: 2100  -  total flux cleaned = -0.000299923 Jy
! Component: 2150  -  total flux cleaned = -0.000309913 Jy
! Component: 2200  -  total flux cleaned = -0.000325252 Jy
! Component: 2250  -  total flux cleaned = -0.000335998 Jy
! Component: 2300  -  total flux cleaned = -0.000335831 Jy
! Component: 2350  -  total flux cleaned = -0.000341633 Jy
! Component: 2400  -  total flux cleaned = -0.000341738 Jy
! Component: 2450  -  total flux cleaned = -0.000341826 Jy
! Component: 2500  -  total flux cleaned = -0.0003417 Jy
! Component: 2550  -  total flux cleaned = -0.000341507 Jy
! Component: 2600  -  total flux cleaned = -0.000349101 Jy
! Component: 2650  -  total flux cleaned = -0.000357011 Jy
! Component: 2700  -  total flux cleaned = -0.000357187 Jy
! Component: 2750  -  total flux cleaned = -0.000365973 Jy
! Component: 2800  -  total flux cleaned = -0.000375435 Jy
! Component: 2850  -  total flux cleaned = -0.000375549 Jy
! Component: 2900  -  total flux cleaned = -0.000385965 Jy
! Component: 2950  -  total flux cleaned = -0.000385852 Jy
! Component: 3000  -  total flux cleaned = -0.00039702 Jy
! Component: 3050  -  total flux cleaned = -0.000409098 Jy
! Component: 3100  -  total flux cleaned = -0.000421865 Jy
! Component: 3150  -  total flux cleaned = -0.00042202 Jy
! Component: 3200  -  total flux cleaned = -0.000435483 Jy
! Component: 3250  -  total flux cleaned = -0.000449894 Jy
! Component: 3300  -  total flux cleaned = -0.000465221 Jy
! Component: 3350  -  total flux cleaned = -0.000464865 Jy
! Component: 3400  -  total flux cleaned = -0.000481302 Jy
! Component: 3450  -  total flux cleaned = -0.00049873 Jy
! Component: 3500  -  total flux cleaned = -0.000536234 Jy
! Component: 3550  -  total flux cleaned = -0.000556551 Jy
! Component: 3600  -  total flux cleaned = -0.000556723 Jy
! Component: 3650  -  total flux cleaned = -0.000556183 Jy
! Component: 3700  -  total flux cleaned = -0.000578444 Jy
! Component: 3750  -  total flux cleaned = -0.000601621 Jy
! Component: 3800  -  total flux cleaned = -0.000626347 Jy
! Component: 3850  -  total flux cleaned = -0.000652758 Jy
! Component: 3900  -  total flux cleaned = -0.000680639 Jy
! Component: 3950  -  total flux cleaned = -0.000710406 Jy
! Component: 4000  -  total flux cleaned = -0.00071012 Jy
! Component: 4050  -  total flux cleaned = -0.000775417 Jy
! Total flux subtracted in 4096 components = -0.00077524 Jy
! Clean residual min=-0.001842 max=0.001877 Jy/beam
! Clean residual mean=0.000039 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.019671 Jy
keep
! Adding 244 model components to the UV plane model.
! The established model now contains 320 components and 0.019671 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bs241d_uvs/J0725-3530_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.08 x 20.18 at 18.65 degrees (North through East)
! Clean map  min=-0.0028013  max=0.020135 Jy/beam
! Writing clean map to FITS file: /scr/pima/bs241d_uvs/J0725-3530_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0201351 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000786548 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -11.7191 11.7191 23.4381 46.8763 93.7526
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0023 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.02 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  25.599 
quit
! Quitting program
! Log file /scr/pima/bs241d_uvs/J0725-3530_X_uvs.log closed on Tue Mar 24 08:19:15 2015