! Started logfile: /scr/pima/bs241f_uvs/J0317+0248_X_uvs.log on Wed Jul  8 16:48:48 2015
obs /scr/pima/bs241f_uvs/J0317+0248_X_uva.fits
! Reading UV FITS file: /scr/pima/bs241f_uvs/J0317+0248_X_uva.fits
! AN table 1: 717 integrations on 10 of 10 possible baselines.
! AN table 2: 69 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.756593 visibilities/baseline/integration-bin.
! Found source: J0317+0248
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 0 lines of history.
! 
! Reading 45904 visibilities.
select RR
! Polarization RR is unavailable.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bs241f_uvs/J0317+0248_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 460 telescope corrections were flagged in sub-array 1.
!  A total of 213 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 460 telescope corrections were flagged in sub-array 1.
!  A total of 213 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 460 telescope corrections were flagged in sub-array 1.
!  A total of 213 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 460 telescope corrections were flagged in sub-array 1.
!  A total of 213 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 460 telescope corrections were flagged in sub-array 1.
!  A total of 213 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 460 telescope corrections were flagged in sub-array 1.
!  A total of 213 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 460 telescope corrections were flagged in sub-array 1.
!  A total of 213 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 460 telescope corrections were flagged in sub-array 1.
!  A total of 213 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000365Jy  sigma=30.601951
! Fit after  self-cal, rms=0.985436Jy  sigma=30.051151
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.646 mas, bmaj=12.49 mas, bpa=80.14 degrees
! Estimated noise=0.201387 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011653 Jy
! Component: 100  -  total flux cleaned = 0.0141943 Jy
! Total flux subtracted in 100 components = 0.0141943 Jy
! Clean residual min=-0.000832 max=0.001093 Jy/beam
! Clean residual mean=-0.000007 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.0141943 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.0141943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.022274Jy  sigma=0.621669
! Fit after  self-cal, rms=0.020547Jy  sigma=0.565075
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00246449 Jy
! Component: 100  -  total flux cleaned = 0.00318546 Jy
! Total flux subtracted in 100 components = 0.00318546 Jy
! Clean residual min=-0.000662 max=0.000868 Jy/beam
! Clean residual mean=-0.000008 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.0173797 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 31 components and 0.0173797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020288Jy  sigma=0.559435
! Fit after  self-cal, rms=0.020286Jy  sigma=0.559338
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.014 mas, bmaj=10.85 mas, bpa=-83.54 degrees
! Estimated noise=0.114612 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000714872 Jy
! Component: 100  -  total flux cleaned = 0.00129641 Jy
! Component: 150  -  total flux cleaned = 0.00178606 Jy
! Component: 200  -  total flux cleaned = 0.00220345 Jy
! Total flux subtracted in 200 components = 0.00220345 Jy
! Clean residual min=-0.000794 max=0.000971 Jy/beam
! Clean residual mean=-0.000007 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.0195832 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 74 components and 0.0195832 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020246Jy  sigma=0.557927
! Fit after  self-cal, rms=0.020231Jy  sigma=0.557601
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.014 x 10.85 at -83.54 degrees (North through East)
! Clean map  min=-0.00082773  max=0.017465 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 147 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.11     KP        1.06     LA        0.98     OV        0.90     
!   PT        0.92     
! 
!  A total of 63 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Correcting IF 2.
!  A total of 147 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.11     KP        1.04     LA        0.94     OV        0.93     
!   PT        0.96     
! 
!  A total of 63 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Correcting IF 3.
!  A total of 147 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.13     KP        1.08     LA        0.88     OV        0.97     
!   PT        0.95     
! 
!  A total of 63 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Correcting IF 4.
!  A total of 147 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.17     KP        1.01     LA        0.92     OV        0.96     
!   PT        0.93     
! 
!  A total of 63 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Correcting IF 5.
!  A total of 147 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.12     KP        1.09     LA        0.98     OV        0.87     
!   PT        0.95     
! 
!  A total of 63 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Correcting IF 6.
!  A total of 147 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.19     KP        1.15     LA        0.95     OV        0.91     
!   PT        0.95     
! 
!  A total of 63 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Correcting IF 7.
!  A total of 147 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.08     KP        1.11     LA        0.97     OV        0.90     
!   PT        0.90     
! 
!  A total of 63 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Correcting IF 8.
!  A total of 147 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.09     KP        1.09     LA        0.91     OV        0.88     
!   PT        0.92     
! 
!  A total of 63 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    KP        0.00*    LA        0.00*    PT        0.00*    
! 
! 
! Fit before self-cal, rms=0.020231Jy  sigma=0.557601
! Fit after  self-cal, rms=0.019256Jy  sigma=0.556735
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.076 mas, bmaj=10.86 mas, bpa=-84.28 degrees
! Estimated noise=0.11692 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000366164 Jy
! Component: 100  -  total flux cleaned = 0.00059902 Jy
! Component: 150  -  total flux cleaned = 0.000795995 Jy
! Component: 200  -  total flux cleaned = 0.000966941 Jy
! Total flux subtracted in 200 components = 0.000966941 Jy
! Clean residual min=-0.000376 max=0.000486 Jy/beam
! Clean residual mean=-0.000004 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.0205501 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 131 components and 0.0205501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019246Jy  sigma=0.556480
! Fit after  self-cal, rms=0.019202Jy  sigma=0.555264
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019202Jy  sigma=0.555264
! Fit after  self-cal, rms=0.019157Jy  sigma=0.555045
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.098 mas, bmaj=10.83 mas, bpa=-84.27 degrees
! Estimated noise=0.116892 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000267487 Jy
! Component: 100  -  total flux cleaned = 0.000469038 Jy
! Component: 150  -  total flux cleaned = 0.000640184 Jy
! Component: 200  -  total flux cleaned = 0.0007882 Jy
! Total flux subtracted in 200 components = 0.0007882 Jy
! Clean residual min=-0.000360 max=0.000422 Jy/beam
! Clean residual mean=-0.000003 rms=0.000129 Jy/beam
! Combined flux in latest and established models = 0.0213383 Jy
selfcal
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 169 components and 0.0213383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019150Jy  sigma=0.554884
! Fit after  self-cal, rms=0.019151Jy  sigma=0.554708
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000180086 Jy
! Component: 100  -  total flux cleaned = 0.000327718 Jy
! Component: 150  -  total flux cleaned = 0.000455429 Jy
! Component: 200  -  total flux cleaned = 0.000566951 Jy
! Total flux subtracted in 200 components = 0.000566951 Jy
! Clean residual min=-0.000347 max=0.000416 Jy/beam
! Clean residual mean=-0.000004 rms=0.000125 Jy/beam
! Combined flux in latest and established models = 0.0219053 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 200 components and 0.0219053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019148Jy  sigma=0.554628
! Fit after  self-cal, rms=0.019147Jy  sigma=0.554541
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019147Jy  sigma=0.554541
! Fit after  self-cal, rms=0.019285Jy  sigma=0.554151
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.095 mas, bmaj=10.81 mas, bpa=-84.04 degrees
! Estimated noise=0.118063 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000229569 Jy
! Component: 100  -  total flux cleaned = 0.000384165 Jy
! Component: 150  -  total flux cleaned = 0.000507554 Jy
! Component: 200  -  total flux cleaned = 0.000611907 Jy
! Total flux subtracted in 200 components = 0.000611907 Jy
! Clean residual min=-0.000258 max=0.000307 Jy/beam
! Clean residual mean=-0.000002 rms=0.000090 Jy/beam
! Combined flux in latest and established models = 0.0225172 Jy
selfcal
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 259 components and 0.0225172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019281Jy  sigma=0.554056
! Fit after  self-cal, rms=0.019280Jy  sigma=0.553992
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000101975 Jy
! Component: 100  -  total flux cleaned = 0.000183219 Jy
! Component: 150  -  total flux cleaned = 0.000252245 Jy
! Component: 200  -  total flux cleaned = 0.000312206 Jy
! Total flux subtracted in 200 components = 0.000312206 Jy
! Clean residual min=-0.000270 max=0.000326 Jy/beam
! Clean residual mean=-0.000002 rms=0.000095 Jy/beam
! Combined flux in latest and established models = 0.0228294 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 274 components and 0.0228294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019279Jy  sigma=0.553972
! Fit after  self-cal, rms=0.019279Jy  sigma=0.553966
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019279Jy  sigma=0.553966
! Fit after  self-cal, rms=0.019421Jy  sigma=0.553868
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.141 mas, bmaj=10.81 mas, bpa=-83.58 degrees
! Estimated noise=0.11893 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181494 Jy
! Component: 100  -  total flux cleaned = 0.000307914 Jy
! Component: 150  -  total flux cleaned = 0.00041117 Jy
! Component: 200  -  total flux cleaned = 0.000499504 Jy
! Total flux subtracted in 200 components = 0.000499504 Jy
! Clean residual min=-0.000248 max=0.000280 Jy/beam
! Clean residual mean=-0.000001 rms=0.000080 Jy/beam
! Combined flux in latest and established models = 0.0233289 Jy
selfcal
! Performing phase self-cal
! Adding 91 model components to the UV plane model.
! The established model now contains 316 components and 0.0233289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019419Jy  sigma=0.553809
! Fit after  self-cal, rms=0.019418Jy  sigma=0.553757
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.2924e-05 Jy
! Component: 100  -  total flux cleaned = 0.000149291 Jy
! Component: 150  -  total flux cleaned = 0.000206004 Jy
! Component: 200  -  total flux cleaned = 0.000255776 Jy
! Total flux subtracted in 200 components = 0.000255776 Jy
! Clean residual min=-0.000258 max=0.000289 Jy/beam
! Clean residual mean=-0.000002 rms=0.000084 Jy/beam
! Combined flux in latest and established models = 0.0235847 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 327 components and 0.0235847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019417Jy  sigma=0.553745
! Fit after  self-cal, rms=0.019417Jy  sigma=0.553733
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=8.084 mas, bmaj=10.78 mas, bpa=-83.86 degrees
! Estimated noise=0.118945 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.084 x 10.78 at -83.86 degrees (North through East)
! Clean map  min=-0.00026639  max=0.018082 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.691 mas, bmaj=11.94 mas, bpa=81.14 degrees
! Estimated noise=0.31001 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013696 Jy
! Component: 100  -  total flux cleaned = 0.0167602 Jy
! Component: 150  -  total flux cleaned = 0.0179531 Jy
! Component: 200  -  total flux cleaned = 0.0187186 Jy
! Total flux subtracted in 200 components = 0.0187186 Jy
! Clean residual min=-0.000792 max=0.000804 Jy/beam
! Clean residual mean=-0.000001 rms=0.000248 Jy/beam
! Combined flux in latest and established models = 0.0187186 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 62 model components to the UV plane model.
! The established model now contains 62 components and 0.0187186 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.084 mas, bmaj=10.78 mas, bpa=-83.86 degrees
! Estimated noise=0.118945 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000727632 Jy
! Component: 100  -  total flux cleaned = 0.00130018 Jy
! Component: 150  -  total flux cleaned = 0.00177589 Jy
! Component: 200  -  total flux cleaned = 0.00217562 Jy
! Total flux subtracted in 200 components = 0.00217562 Jy
! Clean residual min=-0.000409 max=0.000423 Jy/beam
! Clean residual mean=-0.000003 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.0208942 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 119 components and 0.0208942 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.141 mas, bmaj=10.81 mas, bpa=-83.58 degrees
! Estimated noise=0.11893 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00034136 Jy
! Component: 100  -  total flux cleaned = 0.000631152 Jy
! Component: 150  -  total flux cleaned = 0.000878049 Jy
! Component: 200  -  total flux cleaned = 0.00108893 Jy
! Total flux subtracted in 200 components = 0.00108893 Jy
! Clean residual min=-0.000295 max=0.000348 Jy/beam
! Clean residual mean=-0.000002 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.0219831 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000180607 Jy
! Component: 100  -  total flux cleaned = 0.000335656 Jy
! Component: 150  -  total flux cleaned = 0.000469562 Jy
! Component: 200  -  total flux cleaned = 0.000588215 Jy
! Total flux subtracted in 200 components = 0.000588215 Jy
! Clean residual min=-0.000266 max=0.000314 Jy/beam
! Clean residual mean=-0.000002 rms=0.000096 Jy/beam
! Combined flux in latest and established models = 0.0225713 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 193 components and 0.0225713 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.084 mas, bmaj=10.78 mas, bpa=-83.86 degrees
! Estimated noise=0.118945 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105641 Jy
! Component: 100  -  total flux cleaned = 0.000202155 Jy
! Component: 150  -  total flux cleaned = 0.000290725 Jy
! Component: 200  -  total flux cleaned = 0.000372126 Jy
! Total flux subtracted in 200 components = 0.000372126 Jy
! Clean residual min=-0.000259 max=0.000302 Jy/beam
! Clean residual mean=-0.000002 rms=0.000090 Jy/beam
! Combined flux in latest and established models = 0.0229435 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 232 components and 0.0229435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.019419Jy  sigma=0.553769
! Fit after  self-cal, rms=0.019417Jy  sigma=0.553755
wmodel /scr/pima/bs241f_uvs/J0317+0248_X_map.mod
! Writing 232 model components to file: /scr/pima/bs241f_uvs/J0317+0248_X_map.mod
wobs /scr/pima/bs241f_uvs/J0317+0248_X_uvs.fits
! Writing UV FITS file: /scr/pima/bs241f_uvs/J0317+0248_X_uvs.fits
wwins /scr/pima/bs241f_uvs/J0317+0248_X_map.win
! wwins: Wrote 1 windows to /scr/pima/bs241f_uvs/J0317+0248_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 8.93501e-05 Jy
! Component: 100  -  total flux cleaned = 8.55087e-05 Jy
! Component: 150  -  total flux cleaned = 5.54043e-05 Jy
! Component: 200  -  total flux cleaned = 3.82722e-05 Jy
! Component: 250  -  total flux cleaned = 5.89073e-07 Jy
! Component: 300  -  total flux cleaned = -4.41613e-05 Jy
! Component: 350  -  total flux cleaned = -7.85701e-05 Jy
! Component: 400  -  total flux cleaned = -0.000106119 Jy
! Component: 450  -  total flux cleaned = -0.000127363 Jy
! Component: 500  -  total flux cleaned = -0.000145349 Jy
! Component: 550  -  total flux cleaned = -0.000157827 Jy
! Component: 600  -  total flux cleaned = -0.000170003 Jy
! Component: 650  -  total flux cleaned = -0.000184166 Jy
! Component: 700  -  total flux cleaned = -0.000193355 Jy
! Component: 750  -  total flux cleaned = -0.000202335 Jy
! Component: 800  -  total flux cleaned = -0.00021111 Jy
! Component: 850  -  total flux cleaned = -0.000215417 Jy
! Component: 900  -  total flux cleaned = -0.000219654 Jy
! Component: 950  -  total flux cleaned = -0.000221716 Jy
! Component: 1000  -  total flux cleaned = -0.000225763 Jy
! Component: 1050  -  total flux cleaned = -0.000223773 Jy
! Component: 1100  -  total flux cleaned = -0.000225762 Jy
! Component: 1150  -  total flux cleaned = -0.000221893 Jy
! Component: 1200  -  total flux cleaned = -0.000218093 Jy
! Component: 1250  -  total flux cleaned = -0.000212502 Jy
! Component: 1300  -  total flux cleaned = -0.000210682 Jy
! Component: 1350  -  total flux cleaned = -0.000201646 Jy
! Component: 1400  -  total flux cleaned = -0.000199871 Jy
! Component: 1450  -  total flux cleaned = -0.000191075 Jy
! Component: 1500  -  total flux cleaned = -0.000182382 Jy
! Component: 1550  -  total flux cleaned = -0.00017552 Jy
! Component: 1600  -  total flux cleaned = -0.000165334 Jy
! Component: 1650  -  total flux cleaned = -0.000158632 Jy
! Component: 1700  -  total flux cleaned = -0.000150359 Jy
! Component: 1750  -  total flux cleaned = -0.000148708 Jy
! Component: 1800  -  total flux cleaned = -0.000137333 Jy
! Component: 1850  -  total flux cleaned = -0.000130888 Jy
! Component: 1900  -  total flux cleaned = -0.000122914 Jy
! Component: 1950  -  total flux cleaned = -0.000111847 Jy
! Component: 2000  -  total flux cleaned = -0.000104006 Jy
! Component: 2050  -  total flux cleaned = -9.62345e-05 Jy
! Component: 2100  -  total flux cleaned = -8.54264e-05 Jy
! Component: 2150  -  total flux cleaned = -7.77801e-05 Jy
! Component: 2200  -  total flux cleaned = -7.16968e-05 Jy
! Component: 2250  -  total flux cleaned = -6.26375e-05 Jy
! Component: 2300  -  total flux cleaned = -5.21519e-05 Jy
! Component: 2350  -  total flux cleaned = -4.62031e-05 Jy
! Component: 2400  -  total flux cleaned = -3.88045e-05 Jy
! Component: 2450  -  total flux cleaned = -2.99805e-05 Jy
! Component: 2500  -  total flux cleaned = -2.12173e-05 Jy
! Component: 2550  -  total flux cleaned = -1.5396e-05 Jy
! Component: 2600  -  total flux cleaned = -6.72332e-06 Jy
! Component: 2650  -  total flux cleaned = -9.74187e-07 Jy
! Component: 2700  -  total flux cleaned = 7.63069e-06 Jy
! Component: 2750  -  total flux cleaned = 1.19155e-05 Jy
! Component: 2800  -  total flux cleaned = 1.62169e-05 Jy
! Component: 2850  -  total flux cleaned = 1.90817e-05 Jy
! Component: 2900  -  total flux cleaned = 2.19437e-05 Jy
! Component: 2950  -  total flux cleaned = 2.62396e-05 Jy
! Component: 3000  -  total flux cleaned = 3.34032e-05 Jy
! Component: 3050  -  total flux cleaned = 3.62652e-05 Jy
! Component: 3100  -  total flux cleaned = 3.7696e-05 Jy
! Component: 3150  -  total flux cleaned = 4.48925e-05 Jy
! Component: 3200  -  total flux cleaned = 4.63427e-05 Jy
! Component: 3250  -  total flux cleaned = 5.06683e-05 Jy
! Component: 3300  -  total flux cleaned = 5.50135e-05 Jy
! Component: 3350  -  total flux cleaned = 5.937e-05 Jy
! Component: 3400  -  total flux cleaned = 6.2291e-05 Jy
! Component: 3450  -  total flux cleaned = 6.37554e-05 Jy
! Component: 3500  -  total flux cleaned = 6.81555e-05 Jy
! Component: 3550  -  total flux cleaned = 6.96215e-05 Jy
! Component: 3600  -  total flux cleaned = 6.66698e-05 Jy
! Component: 3650  -  total flux cleaned = 6.81672e-05 Jy
! Component: 3700  -  total flux cleaned = 6.36787e-05 Jy
! Component: 3750  -  total flux cleaned = 6.06672e-05 Jy
! Component: 3800  -  total flux cleaned = 5.46084e-05 Jy
! Component: 3850  -  total flux cleaned = 5.00468e-05 Jy
! Component: 3900  -  total flux cleaned = 4.69843e-05 Jy
! Component: 3950  -  total flux cleaned = 4.08238e-05 Jy
! Component: 4000  -  total flux cleaned = 3.77128e-05 Jy
! Component: 4050  -  total flux cleaned = 3.1456e-05 Jy
! Total flux subtracted in 4096 components = 2.98909e-05 Jy
! Clean residual min=-0.000091 max=0.000087 Jy/beam
! Clean residual mean=0.000001 rms=0.000037 Jy/beam
! Combined flux in latest and established models = 0.0229733 Jy
keep
! Adding 582 model components to the UV plane model.
! The established model now contains 814 components and 0.0229733 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bs241f_uvs/J0317+0248_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.084 x 10.78 at -83.86 degrees (North through East)
! Clean map  min=-0.00034763  max=0.01796 Jy/beam
! Writing clean map to FITS file: /scr/pima/bs241f_uvs/J0317+0248_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0179603 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 3.89672e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.650888 0.650888 1.30178 2.60355 5.2071 10.4142 20.8284 41.6568 83.3136
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.017 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  460.909 
quit
! Quitting program
! Log file /scr/pima/bs241f_uvs/J0317+0248_X_uvs.log closed on Wed Jul  8 16:48:55 2015