! Started logfile: /scr/pima/bs241d_uvs/J0242+1101_X_uvs.log on Tue Mar 24 08:17:37 2015
obs /scr/pima/bs241d_uvs/J0242+1101_X_uva.fits
! Reading UV FITS file: /scr/pima/bs241d_uvs/J0242+1101_X_uva.fits
! AN table 1: 30 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.818519 visibilities/baseline/integration-bin.
! Found source: J0242+1101
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 0 lines of history.
! 
! Reading 7072 visibilities.
select RR
! Polarization RR is unavailable.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bs241d_uvs/J0242+1101_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.346031Jy  sigma=41.805461
! Fit after  self-cal, rms=0.229089Jy  sigma=6.538908
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8546 mas, bmaj=2.054 mas, bpa=-14.33 degrees
! Estimated noise=0.471989 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.631695 Jy
! Component: 100  -  total flux cleaned = 0.787075 Jy
! Total flux subtracted in 100 components = 0.787075 Jy
! Clean residual min=-0.034303 max=0.062056 Jy/beam
! Clean residual mean=-0.000034 rms=0.010057 Jy/beam
! Combined flux in latest and established models = 0.787075 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.787075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.163807Jy  sigma=4.924155
! Fit after  self-cal, rms=0.163739Jy  sigma=4.923186
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0646379 Jy
! Component: 100  -  total flux cleaned = 0.100335 Jy
! Total flux subtracted in 100 components = 0.100335 Jy
! Clean residual min=-0.027378 max=0.033743 Jy/beam
! Clean residual mean=-0.000023 rms=0.006404 Jy/beam
! Combined flux in latest and established models = 0.88741 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 24 components and 0.887409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.125310Jy  sigma=3.634461
! Fit after  self-cal, rms=0.125258Jy  sigma=3.631168
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.198 mas, bmaj=2.292 mas, bpa=-9.007 degrees
! Estimated noise=0.278668 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0362116 Jy
! Component: 100  -  total flux cleaned = 0.0569344 Jy
! Component: 150  -  total flux cleaned = 0.0704689 Jy
! Component: 200  -  total flux cleaned = 0.0796882 Jy
! Total flux subtracted in 200 components = 0.0796882 Jy
! Clean residual min=-0.032724 max=0.035914 Jy/beam
! Clean residual mean=-0.000034 rms=0.008498 Jy/beam
! Combined flux in latest and established models = 0.967098 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 51 components and 0.967098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.114750Jy  sigma=3.250327
! Fit after  self-cal, rms=0.114674Jy  sigma=3.246581
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.198 x 2.292 at -9.007 degrees (North through East)
! Clean map  min=-0.03148  max=0.82915 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     HN        0.95     KP        0.97     LA        0.97     
!   MK        0.98     NL        0.97     OV        1.03     PT        0.88     
!   SC        0.95     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        0.93     KP        1.02     LA        0.93     
!   MK        0.99     NL        1.01     OV        1.03     PT        0.91     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     HN        0.92     KP        1.05     LA        0.88     
!   MK        1.01     NL        1.01     OV        1.06     PT        0.93     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     HN        1.03     KP        0.92     LA        0.97     
!   MK        1.02     NL        1.05     OV        1.10     PT        0.93     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        1.06     KP        1.12     LA        0.98     
!   MK        1.04     NL        0.98     OV        1.04     PT        0.90     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     HN        1.12     KP        1.14     LA        1.00     
!   MK        1.05     NL        1.02     OV        1.12     PT        0.93     
!   SC        1.06     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        1.05     KP        1.16     LA        0.96     
!   MK        1.03     NL        1.00     OV        1.16     PT        0.87     
!   SC        1.02     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     HN        1.05     KP        1.09     LA        0.93     
!   MK        1.02     NL        0.98     OV        1.06     PT        0.87     
!   SC        1.03     
! 
! 
! Fit before self-cal, rms=0.114674Jy  sigma=3.246581
! Fit after  self-cal, rms=0.078262Jy  sigma=1.729170
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.206 mas, bmaj=2.312 mas, bpa=-9.02 degrees
! Estimated noise=0.279173 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.8, -4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.020956 Jy
! Component: 100  -  total flux cleaned = 0.031355 Jy
! Component: 150  -  total flux cleaned = 0.032422 Jy
! Component: 200  -  total flux cleaned = 0.0321236 Jy
! Total flux subtracted in 200 components = 0.0321236 Jy
! Clean residual min=-0.009151 max=0.009754 Jy/beam
! Clean residual mean=0.000003 rms=0.002196 Jy/beam
! Combined flux in latest and established models = 0.999221 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 67 components and 0.999221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.071360Jy  sigma=1.462104
! Fit after  self-cal, rms=0.071107Jy  sigma=1.456031
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.071107Jy  sigma=1.456031
! Fit after  self-cal, rms=0.070195Jy  sigma=1.441524
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.201 mas, bmaj=2.307 mas, bpa=-8.963 degrees
! Estimated noise=0.278333 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00558834 Jy
! Component: 100  -  total flux cleaned = 0.00513117 Jy
! Component: 150  -  total flux cleaned = 0.00453036 Jy
! Component: 200  -  total flux cleaned = 0.00380415 Jy
! Total flux subtracted in 200 components = 0.00380415 Jy
! Clean residual min=-0.007849 max=0.008235 Jy/beam
! Clean residual mean=0.000002 rms=0.001820 Jy/beam
! Combined flux in latest and established models = 1.00303 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 78 components and 1.00303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.068608Jy  sigma=1.380808
! Fit after  self-cal, rms=0.068515Jy  sigma=1.378764
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-13.4, 7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00340544 Jy
! Component: 100  -  total flux cleaned = 0.0019978 Jy
! Component: 150  -  total flux cleaned = 0.000968532 Jy
! Component: 200  -  total flux cleaned = 0.000317558 Jy
! Total flux subtracted in 200 components = 0.000317558 Jy
! Clean residual min=-0.007392 max=0.006142 Jy/beam
! Clean residual mean=0.000001 rms=0.001528 Jy/beam
! Combined flux in latest and established models = 1.00334 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 95 components and 1.00334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.067452Jy  sigma=1.338663
! Fit after  self-cal, rms=0.067387Jy  sigma=1.336578
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.067387Jy  sigma=1.336578
! Fit after  self-cal, rms=0.066890Jy  sigma=1.327272
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.2 mas, bmaj=2.305 mas, bpa=-8.869 degrees
! Estimated noise=0.277243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203986 Jy
! Component: 100  -  total flux cleaned = 0.00179143 Jy
! Component: 150  -  total flux cleaned = 0.00148177 Jy
! Component: 200  -  total flux cleaned = 0.000929003 Jy
! Total flux subtracted in 200 components = 0.000929003 Jy
! Clean residual min=-0.006259 max=0.005374 Jy/beam
! Clean residual mean=0.000001 rms=0.001343 Jy/beam
! Combined flux in latest and established models = 1.00427 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 116 components and 1.00427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.066454Jy  sigma=1.309926
! Fit after  self-cal, rms=0.066433Jy  sigma=1.309281
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144838 Jy
! Component: 100  -  total flux cleaned = -0.000174849 Jy
! Component: 150  -  total flux cleaned = -0.000474526 Jy
! Component: 200  -  total flux cleaned = -0.000756067 Jy
! Total flux subtracted in 200 components = -0.000756067 Jy
! Clean residual min=-0.005894 max=0.004948 Jy/beam
! Clean residual mean=0.000001 rms=0.001283 Jy/beam
! Combined flux in latest and established models = 1.00352 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 133 components and 1.00352 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.066247Jy  sigma=1.302867
! Fit after  self-cal, rms=0.066241Jy  sigma=1.302715
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.066241Jy  sigma=1.302715
! Fit after  self-cal, rms=0.066066Jy  sigma=1.299785
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.267 mas, bmaj=3.163 mas, bpa=2.303 degrees
! Estimated noise=0.311737 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00142951 Jy
! Component: 100  -  total flux cleaned = -0.00189771 Jy
! Component: 150  -  total flux cleaned = -0.00218628 Jy
! Component: 200  -  total flux cleaned = -0.00243568 Jy
! Total flux subtracted in 200 components = -0.00243568 Jy
! Clean residual min=-0.005753 max=0.006335 Jy/beam
! Clean residual mean=0.000001 rms=0.001632 Jy/beam
! Combined flux in latest and established models = 1.00108 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 154 components and 1.00108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.065934Jy  sigma=1.294591
! Fit after  self-cal, rms=0.065903Jy  sigma=1.293719
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00048485 Jy
! Component: 100  -  total flux cleaned = -0.000594301 Jy
! Component: 150  -  total flux cleaned = -0.000792364 Jy
! Component: 200  -  total flux cleaned = -0.000928833 Jy
! Total flux subtracted in 200 components = -0.000928833 Jy
! Clean residual min=-0.005495 max=0.006123 Jy/beam
! Clean residual mean=0.000001 rms=0.001578 Jy/beam
! Combined flux in latest and established models = 1.00015 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 165 components and 1.00015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.065858Jy  sigma=1.291702
! Fit after  self-cal, rms=0.065850Jy  sigma=1.291519
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.2 mas, bmaj=2.305 mas, bpa=-8.814 degrees
! Estimated noise=0.276659 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.2 x 2.305 at -8.814 degrees (North through East)
! Clean map  min=-0.0057552  max=0.8242 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.065850Jy  sigma=1.291519
! Fit after  self-cal, rms=0.064966Jy  sigma=1.253208
! Inverting map and beam 
! Estimated beam: bmin=1.201 mas, bmaj=2.306 mas, bpa=-8.767 degrees
! Estimated noise=0.275614 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00302486 Jy
! Component: 100  -  total flux cleaned = -0.00376481 Jy
! Component: 150  -  total flux cleaned = -0.00382982 Jy
! Component: 200  -  total flux cleaned = -0.00388611 Jy
! Total flux subtracted in 200 components = -0.00388611 Jy
! Clean residual min=-0.005003 max=0.005031 Jy/beam
! Clean residual mean=-0.000002 rms=0.001233 Jy/beam
! Combined flux in latest and established models = 0.996265 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 177 components and 0.996265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064662Jy  sigma=1.247388
! Fit after  self-cal, rms=0.064658Jy  sigma=1.247306
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00018491 Jy
! Component: 100  -  total flux cleaned = -0.000285321 Jy
! Component: 150  -  total flux cleaned = -0.000427976 Jy
! Component: 200  -  total flux cleaned = -0.000562582 Jy
! Total flux subtracted in 200 components = -0.000562582 Jy
! Clean residual min=-0.004827 max=0.004968 Jy/beam
! Clean residual mean=-0.000002 rms=0.001214 Jy/beam
! Combined flux in latest and established models = 0.995703 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 182 components and 0.995703 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064566Jy  sigma=1.245156
! Fit after  self-cal, rms=0.064564Jy  sigma=1.245110
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064564Jy  sigma=1.245110
! Fit after  self-cal, rms=0.064287Jy  sigma=1.227992
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8588 mas, bmaj=2.058 mas, bpa=-14.04 degrees
! Estimated noise=0.465707 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.623088 Jy
! Component: 100  -  total flux cleaned = 0.777803 Jy
! Component: 150  -  total flux cleaned = 0.842977 Jy
! Component: 200  -  total flux cleaned = 0.880182 Jy
! Total flux subtracted in 200 components = 0.880182 Jy
! Clean residual min=-0.014052 max=0.019408 Jy/beam
! Clean residual mean=-0.000016 rms=0.003970 Jy/beam
! Combined flux in latest and established models = 0.880182 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.880182 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.202 mas, bmaj=2.307 mas, bpa=-8.736 degrees
! Estimated noise=0.27488 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0352011 Jy
! Component: 100  -  total flux cleaned = 0.0559372 Jy
! Component: 150  -  total flux cleaned = 0.0706863 Jy
! Component: 200  -  total flux cleaned = 0.0816573 Jy
! Total flux subtracted in 200 components = 0.0816573 Jy
! Clean residual min=-0.008447 max=0.008397 Jy/beam
! Clean residual mean=-0.000008 rms=0.002173 Jy/beam
! Combined flux in latest and established models = 0.961839 Jy
! Adding 50 model components to the UV plane model.
! The established model now contains 60 components and 0.961839 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.269 mas, bmaj=3.167 mas, bpa=2.324 degrees
! Estimated noise=0.309289 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108706 Jy
! Component: 100  -  total flux cleaned = 0.0175534 Jy
! Component: 150  -  total flux cleaned = 0.0203527 Jy
! Component: 200  -  total flux cleaned = 0.0214815 Jy
! Total flux subtracted in 200 components = 0.0214815 Jy
! Clean residual min=-0.007234 max=0.006858 Jy/beam
! Clean residual mean=-0.000007 rms=0.001940 Jy/beam
! Combined flux in latest and established models = 0.983321 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00054555 Jy
! Component: 100  -  total flux cleaned = 0.00102598 Jy
! Component: 150  -  total flux cleaned = 0.00144707 Jy
! Component: 200  -  total flux cleaned = 0.0017335 Jy
! Total flux subtracted in 200 components = 0.0017335 Jy
! Clean residual min=-0.006670 max=0.006718 Jy/beam
! Clean residual mean=-0.000006 rms=0.001799 Jy/beam
! Combined flux in latest and established models = 0.985054 Jy
! Adding 69 model components to the UV plane model.
! The established model now contains 123 components and 0.985054 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.202 mas, bmaj=2.307 mas, bpa=-8.736 degrees
! Estimated noise=0.27488 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00117099 Jy
! Component: 100  -  total flux cleaned = -0.000147206 Jy
! Component: 150  -  total flux cleaned = 0.000582214 Jy
! Component: 200  -  total flux cleaned = 0.00111091 Jy
! Total flux subtracted in 200 components = 0.00111091 Jy
! Clean residual min=-0.005774 max=0.005270 Jy/beam
! Clean residual mean=-0.000003 rms=0.001302 Jy/beam
! Combined flux in latest and established models = 0.986165 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 137 components and 0.986165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.064645Jy  sigma=1.248781
! Fit after  self-cal, rms=0.064623Jy  sigma=1.247751
wmodel /scr/pima/bs241d_uvs/J0242+1101_X_map.mod
! Writing 137 model components to file: /scr/pima/bs241d_uvs/J0242+1101_X_map.mod
wobs /scr/pima/bs241d_uvs/J0242+1101_X_uvs.fits
! Writing UV FITS file: /scr/pima/bs241d_uvs/J0242+1101_X_uvs.fits
wwins /scr/pima/bs241d_uvs/J0242+1101_X_map.win
! wwins: Wrote 3 windows to /scr/pima/bs241d_uvs/J0242+1101_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00189383 Jy
! Component: 100  -  total flux cleaned = -0.0032156 Jy
! Component: 150  -  total flux cleaned = -0.00449939 Jy
! Component: 200  -  total flux cleaned = -0.00515746 Jy
! Component: 250  -  total flux cleaned = -0.00576558 Jy
! Component: 300  -  total flux cleaned = -0.00633305 Jy
! Component: 350  -  total flux cleaned = -0.00674614 Jy
! Component: 400  -  total flux cleaned = -0.0071904 Jy
! Component: 450  -  total flux cleaned = -0.00756142 Jy
! Component: 500  -  total flux cleaned = -0.00781463 Jy
! Component: 550  -  total flux cleaned = -0.00815386 Jy
! Component: 600  -  total flux cleaned = -0.0083861 Jy
! Component: 650  -  total flux cleaned = -0.00847601 Jy
! Component: 700  -  total flux cleaned = -0.00868892 Jy
! Component: 750  -  total flux cleaned = -0.00876959 Jy
! Component: 800  -  total flux cleaned = -0.00888617 Jy
! Component: 850  -  total flux cleaned = -0.00899884 Jy
! Component: 900  -  total flux cleaned = -0.00899821 Jy
! Component: 950  -  total flux cleaned = -0.00910323 Jy
! Component: 1000  -  total flux cleaned = -0.0091019 Jy
! Component: 1050  -  total flux cleaned = -0.00900451 Jy
! Component: 1100  -  total flux cleaned = -0.00916406 Jy
! Component: 1150  -  total flux cleaned = -0.00904107 Jy
! Component: 1200  -  total flux cleaned = -0.00901204 Jy
! Component: 1250  -  total flux cleaned = -0.00895415 Jy
! Component: 1300  -  total flux cleaned = -0.0089263 Jy
! Component: 1350  -  total flux cleaned = -0.00881766 Jy
! Component: 1400  -  total flux cleaned = -0.00876496 Jy
! Component: 1450  -  total flux cleaned = -0.00868797 Jy
! Component: 1500  -  total flux cleaned = -0.00853746 Jy
! Component: 1550  -  total flux cleaned = -0.00844045 Jy
! Component: 1600  -  total flux cleaned = -0.00832111 Jy
! Component: 1650  -  total flux cleaned = -0.00822901 Jy
! Component: 1700  -  total flux cleaned = -0.00822907 Jy
! Component: 1750  -  total flux cleaned = -0.00809583 Jy
! Component: 1800  -  total flux cleaned = -0.00798785 Jy
! Component: 1850  -  total flux cleaned = -0.00788249 Jy
! Component: 1900  -  total flux cleaned = -0.00779961 Jy
! Component: 1950  -  total flux cleaned = -0.00769853 Jy
! Component: 2000  -  total flux cleaned = -0.00759906 Jy
! Component: 2050  -  total flux cleaned = -0.0074631 Jy
! Component: 2100  -  total flux cleaned = -0.0073299 Jy
! Component: 2150  -  total flux cleaned = -0.00719904 Jy
! Component: 2200  -  total flux cleaned = -0.00708925 Jy
! Component: 2250  -  total flux cleaned = -0.00699912 Jy
! Component: 2300  -  total flux cleaned = -0.00689289 Jy
! Component: 2350  -  total flux cleaned = -0.00682292 Jy
! Component: 2400  -  total flux cleaned = -0.0066856 Jy
! Component: 2450  -  total flux cleaned = -0.00653449 Jy
! Component: 2500  -  total flux cleaned = -0.00648484 Jy
! Component: 2550  -  total flux cleaned = -0.0063708 Jy
! Component: 2600  -  total flux cleaned = -0.00624245 Jy
! Component: 2650  -  total flux cleaned = -0.00611599 Jy
! Component: 2700  -  total flux cleaned = -0.00600671 Jy
! Component: 2750  -  total flux cleaned = -0.00586792 Jy
! Component: 2800  -  total flux cleaned = -0.00576125 Jy
! Component: 2850  -  total flux cleaned = -0.00564121 Jy
! Component: 2900  -  total flux cleaned = -0.00556692 Jy
! Component: 2950  -  total flux cleaned = -0.00549323 Jy
! Component: 3000  -  total flux cleaned = -0.00539105 Jy
! Component: 3050  -  total flux cleaned = -0.00528994 Jy
! Component: 3100  -  total flux cleaned = -0.00523285 Jy
! Component: 3150  -  total flux cleaned = -0.00513364 Jy
! Component: 3200  -  total flux cleaned = -0.00506328 Jy
! Component: 3250  -  total flux cleaned = -0.00499358 Jy
! Component: 3300  -  total flux cleaned = -0.00493832 Jy
! Component: 3350  -  total flux cleaned = -0.00488342 Jy
! Component: 3400  -  total flux cleaned = -0.00481542 Jy
! Component: 3450  -  total flux cleaned = -0.00474788 Jy
! Component: 3500  -  total flux cleaned = -0.00473449 Jy
! Component: 3550  -  total flux cleaned = -0.00465447 Jy
! Component: 3600  -  total flux cleaned = -0.00461472 Jy
! Component: 3650  -  total flux cleaned = -0.00454876 Jy
! Component: 3700  -  total flux cleaned = -0.0045094 Jy
! Component: 3750  -  total flux cleaned = -0.0044832 Jy
! Component: 3800  -  total flux cleaned = -0.00441821 Jy
! Component: 3850  -  total flux cleaned = -0.00437942 Jy
! Component: 3900  -  total flux cleaned = -0.00432795 Jy
! Component: 3950  -  total flux cleaned = -0.00431515 Jy
! Component: 4000  -  total flux cleaned = -0.00431514 Jy
! Component: 4050  -  total flux cleaned = -0.00426437 Jy
! Total flux subtracted in 4096 components = -0.00422643 Jy
! Clean residual min=-0.000754 max=0.000761 Jy/beam
! Clean residual mean=-0.000000 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.981939 Jy
keep
! Adding 289 model components to the UV plane model.
! The established model now contains 426 components and 0.981939 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bs241d_uvs/J0242+1101_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.202 x 2.307 at -8.736 degrees (North through East)
! Clean map  min=-0.0052423  max=0.81969 Jy/beam
! Writing clean map to FITS file: /scr/pima/bs241d_uvs/J0242+1101_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.819689 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000212069 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0776157 0.0776157 0.155231 0.310463 0.620925 1.24185 2.4837 4.9674 9.93481 19.8696 39.7392 79.4785
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.819 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3865.2 
quit
! Quitting program
! Log file /scr/pima/bs241d_uvs/J0242+1101_X_uvs.log closed on Tue Mar 24 08:17:41 2015