! Started logfile: /scr/pima/bs241c_uvs/J0157+0011_X_uvs.log on Thu Jul  2 09:06:18 2015
obs /scr/pima/bs241c_uvs/J0157+0011_X_uva.fits
! Reading UV FITS file: /scr/pima/bs241c_uvs/J0157+0011_X_uva.fits
! AN table 1: 19 integrations on 36 of 36 possible baselines.
! AN table 2: 32 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.548493 visibilities/baseline/integration-bin.
! Found source: J0157+0011
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 0 lines of history.
! 
! Reading 9320 visibilities.
select RR
! Polarization RR is unavailable.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bs241c_uvs/J0157+0011_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 28 telescope corrections were flagged in sub-array 1.
!  A total of 162 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 28 telescope corrections were flagged in sub-array 1.
!  A total of 162 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 28 telescope corrections were flagged in sub-array 1.
!  A total of 162 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 28 telescope corrections were flagged in sub-array 1.
!  A total of 162 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 28 telescope corrections were flagged in sub-array 1.
!  A total of 162 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 28 telescope corrections were flagged in sub-array 1.
!  A total of 162 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 28 telescope corrections were flagged in sub-array 1.
!  A total of 162 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 28 telescope corrections were flagged in sub-array 1.
!  A total of 162 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.010134Jy  sigma=29.410651
! Fit after  self-cal, rms=0.866240Jy  sigma=25.250457
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.895 mas, bmaj=1.955 mas, bpa=3.305 degrees
! Estimated noise=0.386917 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0981301 Jy
! Component: 100  -  total flux cleaned = 0.1264 Jy
! Total flux subtracted in 100 components = 0.1264 Jy
! Clean residual min=-0.004318 max=0.012063 Jy/beam
! Clean residual mean=0.000003 rms=0.001159 Jy/beam
! Combined flux in latest and established models = 0.1264 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.1264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036219Jy  sigma=0.971703
! Fit after  self-cal, rms=0.036205Jy  sigma=0.971239
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125683 Jy
! Component: 100  -  total flux cleaned = 0.0184401 Jy
! Total flux subtracted in 100 components = 0.0184401 Jy
! Clean residual min=-0.003984 max=0.004588 Jy/beam
! Clean residual mean=0.000000 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.14484 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 0.14484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030604Jy  sigma=0.820515
! Fit after  self-cal, rms=0.030598Jy  sigma=0.820240
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.054 mas, bmaj=2.302 mas, bpa=0.2206 degrees
! Estimated noise=0.258327 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00513363 Jy
! Component: 100  -  total flux cleaned = 0.00723245 Jy
! Component: 150  -  total flux cleaned = 0.00833875 Jy
! Component: 200  -  total flux cleaned = 0.00884338 Jy
! Total flux subtracted in 200 components = 0.00884338 Jy
! Clean residual min=-0.003495 max=0.003085 Jy/beam
! Clean residual mean=-0.000013 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.153684 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 41 components and 0.153684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029526Jy  sigma=0.793664
! Fit after  self-cal, rms=0.029466Jy  sigma=0.791951
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.054 x 2.302 at 0.2206 degrees (North through East)
! Clean map  min=-0.0031994  max=0.1294 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.06     HN        0.92     KP        0.98     
!   LA        1.03     NL        0.90     OV        0.96     PT        0.89     
!   SC        0.91     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.09     FD        1.05     HN        0.93     KP        0.96     
!   LA        1.00     MK        1.00     NL        0.90     OV        0.92     
!   PT        0.87     SC        0.93     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        0.95     KP        1.05     
!   LA        0.96     NL        1.00     OV        0.98     PT        0.95     
!   SC        0.98     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.99     HN        0.94     KP        1.01     
!   LA        0.94     MK        1.00     NL        0.99     OV        0.92     
!   PT        0.94     SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.05     HN        0.93     KP        1.08     
!   LA        0.95     NL        0.96     OV        0.99     PT        0.95     
!   SC        0.99     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.88     FD        0.97     HN        0.94     KP        1.03     
!   LA        0.89     MK        1.00     NL        0.99     OV        0.94     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.07     HN        1.00     KP        0.92     
!   LA        1.00     NL        0.95     OV        1.01     PT        0.96     
!   SC        1.00     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.90     FD        1.06     HN        0.97     KP        0.91     
!   LA        0.98     MK        1.00     NL        0.94     OV        0.98     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.11     HN        1.05     KP        1.15     
!   LA        1.01     NL        1.07     OV        0.97     PT        0.93     
!   SC        1.00     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.08     HN        1.05     KP        1.15     
!   LA        0.97     MK        1.03     NL        1.08     OV        0.91     
!   PT        0.93     SC        0.98     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.13     HN        1.07     KP        1.18     
!   LA        1.05     NL        1.04     OV        1.02     PT        0.96     
!   SC        1.02     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     FD        1.14     HN        1.10     KP        1.14     
!   LA        1.00     MK        1.06     NL        1.01     OV        0.99     
!   PT        0.96     SC        1.06     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        1.08     HN        1.02     KP        1.16     
!   LA        0.96     MK        1.02     NL        0.88     OV        1.00     
!   PT        0.90     SC        1.03     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.09     HN        1.03     KP        1.15     
!   LA        0.98     NL        0.88     OV        0.98     PT        0.88     
!   SC        1.01     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.10     FD        1.02     HN        1.03     KP        1.12     
!   LA        0.93     MK        1.03     NL        0.88     OV        0.96     
!   PT        0.89     SC        1.07     
! 
! 
! Fit before self-cal, rms=0.029466Jy  sigma=0.791951
! Fit after  self-cal, rms=0.025438Jy  sigma=0.680416
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.067 mas, bmaj=2.324 mas, bpa=0.2303 degrees
! Estimated noise=0.25727 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000311826 Jy
! Component: 100  -  total flux cleaned = 0.000192375 Jy
! Component: 150  -  total flux cleaned = 6.63241e-05 Jy
! Component: 200  -  total flux cleaned = -2.06341e-05 Jy
! Total flux subtracted in 200 components = -2.06341e-05 Jy
! Clean residual min=-0.001055 max=0.001055 Jy/beam
! Clean residual mean=-0.000005 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.153663 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 56 components and 0.153663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025378Jy  sigma=0.678599
! Fit after  self-cal, rms=0.025371Jy  sigma=0.678393
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025371Jy  sigma=0.678393
! Fit after  self-cal, rms=0.025322Jy  sigma=0.678313
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.067 mas, bmaj=2.323 mas, bpa=0.2613 degrees
! Estimated noise=0.256788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.63734e-05 Jy
! Component: 100  -  total flux cleaned = -0.000216652 Jy
! Component: 150  -  total flux cleaned = -0.000304767 Jy
! Component: 200  -  total flux cleaned = -0.000368559 Jy
! Total flux subtracted in 200 components = -0.000368559 Jy
! Clean residual min=-0.001040 max=0.001015 Jy/beam
! Clean residual mean=-0.000004 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.153294 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 68 components and 0.153294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025297Jy  sigma=0.677526
! Fit after  self-cal, rms=0.025294Jy  sigma=0.677498
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.83956e-06 Jy
! Component: 100  -  total flux cleaned = -7.79245e-05 Jy
! Component: 150  -  total flux cleaned = -0.000116953 Jy
! Component: 200  -  total flux cleaned = -0.000164825 Jy
! Total flux subtracted in 200 components = -0.000164825 Jy
! Clean residual min=-0.001042 max=0.000983 Jy/beam
! Clean residual mean=-0.000004 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.15313 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 74 components and 0.15313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025281Jy  sigma=0.677116
! Fit after  self-cal, rms=0.025280Jy  sigma=0.677102
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025280Jy  sigma=0.677102
! Fit after  self-cal, rms=0.025227Jy  sigma=0.677020
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.067 mas, bmaj=2.324 mas, bpa=0.2654 degrees
! Estimated noise=0.256269 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000344146 Jy
! Component: 100  -  total flux cleaned = -0.000417938 Jy
! Component: 150  -  total flux cleaned = -0.00045085 Jy
! Component: 200  -  total flux cleaned = -0.000491489 Jy
! Total flux subtracted in 200 components = -0.000491489 Jy
! Clean residual min=-0.001031 max=0.000968 Jy/beam
! Clean residual mean=-0.000004 rms=0.000235 Jy/beam
! Combined flux in latest and established models = 0.152638 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 80 components and 0.152638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025217Jy  sigma=0.676678
! Fit after  self-cal, rms=0.025216Jy  sigma=0.676667
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.07078e-05 Jy
! Component: 100  -  total flux cleaned = -3.94188e-05 Jy
! Component: 150  -  total flux cleaned = -6.54273e-05 Jy
! Component: 200  -  total flux cleaned = -9.01019e-05 Jy
! Total flux subtracted in 200 components = -9.01019e-05 Jy
! Clean residual min=-0.001029 max=0.000948 Jy/beam
! Clean residual mean=-0.000004 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.152548 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 82 components and 0.152548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025210Jy  sigma=0.676496
! Fit after  self-cal, rms=0.025209Jy  sigma=0.676488
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025209Jy  sigma=0.676488
! Fit after  self-cal, rms=0.025155Jy  sigma=0.676417
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.244 mas, bmaj=3.408 mas, bpa=-5.605 degrees
! Estimated noise=0.309998 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00038296 Jy
! Component: 100  -  total flux cleaned = -0.000442351 Jy
! Component: 150  -  total flux cleaned = -0.000464525 Jy
! Component: 200  -  total flux cleaned = -0.000478624 Jy
! Total flux subtracted in 200 components = -0.000478624 Jy
! Clean residual min=-0.001080 max=0.001188 Jy/beam
! Clean residual mean=-0.000007 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.152069 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 88 components and 0.152069 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025153Jy  sigma=0.676291
! Fit after  self-cal, rms=0.025150Jy  sigma=0.676251
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.98319e-06 Jy
! Component: 100  -  total flux cleaned = 3.43277e-06 Jy
! Component: 150  -  total flux cleaned = -1.66512e-06 Jy
! Component: 200  -  total flux cleaned = -6.22044e-06 Jy
! Total flux subtracted in 200 components = -6.22044e-06 Jy
! Clean residual min=-0.001077 max=0.001191 Jy/beam
! Clean residual mean=-0.000007 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.152063 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 95 components and 0.152063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025149Jy  sigma=0.676188
! Fit after  self-cal, rms=0.025147Jy  sigma=0.676169
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.067 mas, bmaj=2.324 mas, bpa=0.2642 degrees
! Estimated noise=0.25571 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.067 x 2.324 at 0.2642 degrees (North through East)
! Clean map  min=-0.00098002  max=0.12838 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8969 mas, bmaj=1.96 mas, bpa=3.564 degrees
! Estimated noise=0.383451 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0966127 Jy
! Component: 100  -  total flux cleaned = 0.12445 Jy
! Component: 150  -  total flux cleaned = 0.136778 Jy
! Component: 200  -  total flux cleaned = 0.143018 Jy
! Total flux subtracted in 200 components = 0.143018 Jy
! Clean residual min=-0.001960 max=0.003071 Jy/beam
! Clean residual mean=0.000001 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.143018 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.143018 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.067 mas, bmaj=2.324 mas, bpa=0.2642 degrees
! Estimated noise=0.25571 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00470833 Jy
! Component: 100  -  total flux cleaned = 0.00733297 Jy
! Component: 150  -  total flux cleaned = 0.00878844 Jy
! Component: 200  -  total flux cleaned = 0.00908684 Jy
! Total flux subtracted in 200 components = 0.00908684 Jy
! Clean residual min=-0.001027 max=0.001049 Jy/beam
! Clean residual mean=-0.000004 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.152105 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 41 components and 0.152105 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.244 mas, bmaj=3.408 mas, bpa=-5.605 degrees
! Estimated noise=0.309998 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000334768 Jy
! Component: 100  -  total flux cleaned = 0.000296236 Jy
! Component: 150  -  total flux cleaned = 0.000263986 Jy
! Component: 200  -  total flux cleaned = 0.000224551 Jy
! Total flux subtracted in 200 components = 0.000224551 Jy
! Clean residual min=-0.001097 max=0.001206 Jy/beam
! Clean residual mean=-0.000007 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.152329 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.23062e-05 Jy
! Component: 100  -  total flux cleaned = -5.17677e-05 Jy
! Component: 150  -  total flux cleaned = -7.77039e-05 Jy
! Component: 200  -  total flux cleaned = -0.000100498 Jy
! Total flux subtracted in 200 components = -0.000100498 Jy
! Clean residual min=-0.001080 max=0.001202 Jy/beam
! Clean residual mean=-0.000007 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.152229 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 68 components and 0.152229 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.067 mas, bmaj=2.324 mas, bpa=0.2642 degrees
! Estimated noise=0.25571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158821 Jy
! Component: 100  -  total flux cleaned = 0.00015797 Jy
! Component: 150  -  total flux cleaned = 0.000129869 Jy
! Component: 200  -  total flux cleaned = 0.00010444 Jy
! Total flux subtracted in 200 components = 0.00010444 Jy
! Clean residual min=-0.001043 max=0.001014 Jy/beam
! Clean residual mean=-0.000004 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.152333 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 83 components and 0.152333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025168Jy  sigma=0.676825
! Fit after  self-cal, rms=0.025166Jy  sigma=0.676753
wmodel /scr/pima/bs241c_uvs/J0157+0011_X_map.mod
! Writing 83 model components to file: /scr/pima/bs241c_uvs/J0157+0011_X_map.mod
wobs /scr/pima/bs241c_uvs/J0157+0011_X_uvs.fits
! Writing UV FITS file: /scr/pima/bs241c_uvs/J0157+0011_X_uvs.fits
wwins /scr/pima/bs241c_uvs/J0157+0011_X_map.win
! wwins: Wrote 2 windows to /scr/pima/bs241c_uvs/J0157+0011_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 3.56199e-05 Jy
! Component: 100  -  total flux cleaned = -9.31054e-05 Jy
! Component: 150  -  total flux cleaned = -0.000278153 Jy
! Component: 200  -  total flux cleaned = -0.000486635 Jy
! Component: 250  -  total flux cleaned = -0.000630743 Jy
! Component: 300  -  total flux cleaned = -0.000728847 Jy
! Component: 350  -  total flux cleaned = -0.000783828 Jy
! Component: 400  -  total flux cleaned = -0.000837547 Jy
! Component: 450  -  total flux cleaned = -0.000876641 Jy
! Component: 500  -  total flux cleaned = -0.000927994 Jy
! Component: 550  -  total flux cleaned = -0.00100303 Jy
! Component: 600  -  total flux cleaned = -0.00103951 Jy
! Component: 650  -  total flux cleaned = -0.00106348 Jy
! Component: 700  -  total flux cleaned = -0.0010755 Jy
! Component: 750  -  total flux cleaned = -0.00113367 Jy
! Component: 800  -  total flux cleaned = -0.00115636 Jy
! Component: 850  -  total flux cleaned = -0.00119015 Jy
! Component: 900  -  total flux cleaned = -0.00122325 Jy
! Component: 950  -  total flux cleaned = -0.00125567 Jy
! Component: 1000  -  total flux cleaned = -0.00124496 Jy
! Component: 1050  -  total flux cleaned = -0.00126621 Jy
! Component: 1100  -  total flux cleaned = -0.00128724 Jy
! Component: 1150  -  total flux cleaned = -0.00129747 Jy
! Component: 1200  -  total flux cleaned = -0.00127726 Jy
! Component: 1250  -  total flux cleaned = -0.00129698 Jy
! Component: 1300  -  total flux cleaned = -0.00128725 Jy
! Component: 1350  -  total flux cleaned = -0.00129681 Jy
! Component: 1400  -  total flux cleaned = -0.00129662 Jy
! Component: 1450  -  total flux cleaned = -0.00130606 Jy
! Component: 1500  -  total flux cleaned = -0.00129676 Jy
! Component: 1550  -  total flux cleaned = -0.0013151 Jy
! Component: 1600  -  total flux cleaned = -0.00134212 Jy
! Component: 1650  -  total flux cleaned = -0.00135099 Jy
! Component: 1700  -  total flux cleaned = -0.0013862 Jy
! Component: 1750  -  total flux cleaned = -0.00136877 Jy
! Component: 1800  -  total flux cleaned = -0.00141212 Jy
! Component: 1850  -  total flux cleaned = -0.00143773 Jy
! Component: 1900  -  total flux cleaned = -0.00142905 Jy
! Component: 1950  -  total flux cleaned = -0.00145398 Jy
! Component: 2000  -  total flux cleaned = -0.00143741 Jy
! Component: 2050  -  total flux cleaned = -0.00144562 Jy
! Component: 2100  -  total flux cleaned = -0.00144571 Jy
! Component: 2150  -  total flux cleaned = -0.00146975 Jy
! Component: 2200  -  total flux cleaned = -0.00147775 Jy
! Component: 2250  -  total flux cleaned = -0.0015169 Jy
! Component: 2300  -  total flux cleaned = -0.0015556 Jy
! Component: 2350  -  total flux cleaned = -0.00155553 Jy
! Component: 2400  -  total flux cleaned = -0.0015403 Jy
! Component: 2450  -  total flux cleaned = -0.00158566 Jy
! Component: 2500  -  total flux cleaned = -0.00162299 Jy
! Component: 2550  -  total flux cleaned = -0.00159337 Jy
! Component: 2600  -  total flux cleaned = -0.00165206 Jy
! Component: 2650  -  total flux cleaned = -0.00165934 Jy
! Component: 2700  -  total flux cleaned = -0.00170261 Jy
! Component: 2750  -  total flux cleaned = -0.00172408 Jy
! Component: 2800  -  total flux cleaned = -0.00177371 Jy
! Component: 2850  -  total flux cleaned = -0.00177368 Jy
! Component: 2900  -  total flux cleaned = -0.00180153 Jy
! Component: 2950  -  total flux cleaned = -0.00181532 Jy
! Component: 3000  -  total flux cleaned = -0.00184959 Jy
! Component: 3050  -  total flux cleaned = -0.00186996 Jy
! Component: 3100  -  total flux cleaned = -0.00189029 Jy
! Component: 3150  -  total flux cleaned = -0.00192384 Jy
! Component: 3200  -  total flux cleaned = -0.00191717 Jy
! Component: 3250  -  total flux cleaned = -0.00193041 Jy
! Component: 3300  -  total flux cleaned = -0.00195666 Jy
! Component: 3350  -  total flux cleaned = -0.00195672 Jy
! Component: 3400  -  total flux cleaned = -0.00200847 Jy
! Component: 3450  -  total flux cleaned = -0.00200201 Jy
! Component: 3500  -  total flux cleaned = -0.00200202 Jy
! Component: 3550  -  total flux cleaned = -0.00201473 Jy
! Component: 3600  -  total flux cleaned = -0.00201474 Jy
! Component: 3650  -  total flux cleaned = -0.00204601 Jy
! Component: 3700  -  total flux cleaned = -0.00204596 Jy
! Component: 3750  -  total flux cleaned = -0.00203358 Jy
! Component: 3800  -  total flux cleaned = -0.00205812 Jy
! Component: 3850  -  total flux cleaned = -0.00208244 Jy
! Component: 3900  -  total flux cleaned = -0.00209455 Jy
! Component: 3950  -  total flux cleaned = -0.0020825 Jy
! Component: 4000  -  total flux cleaned = -0.00210653 Jy
! Component: 4050  -  total flux cleaned = -0.00212434 Jy
! Total flux subtracted in 4096 components = -0.00212435 Jy
! Clean residual min=-0.000397 max=0.000349 Jy/beam
! Clean residual mean=-0.000001 rms=0.000105 Jy/beam
! Combined flux in latest and established models = 0.150209 Jy
keep
! Adding 322 model components to the UV plane model.
! The established model now contains 405 components and 0.150209 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bs241c_uvs/J0157+0011_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.067 x 2.324 at 0.2642 degrees (North through East)
! Clean map  min=-0.00080427  max=0.12796 Jy/beam
! Writing clean map to FITS file: /scr/pima/bs241c_uvs/J0157+0011_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.127963 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000104241 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.244387 0.244387 0.488773 0.977546 1.95509 3.91018 7.82037 15.6407 31.2815 62.563
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.127 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1227.56 
quit
! Quitting program
! Log file /scr/pima/bs241c_uvs/J0157+0011_X_uvs.log closed on Thu Jul  2 09:06:23 2015