! Started logfile: /scr/pima/bs241c_uvs/J0010+1058_X_uvs.log on Thu Jul  2 09:05:03 2015
obs /scr/pima/bs241c_uvs/J0010+1058_X_uva.fits
! Reading UV FITS file: /scr/pima/bs241c_uvs/J0010+1058_X_uva.fits
! AN table 1: 35 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.777778 visibilities/baseline/integration-bin.
! Found source: J0010+1058
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): I
! 
! Read 0 lines of history.
! 
! Reading 9800 visibilities.
select RR
! Polarization RR is unavailable.
! Selecting polarization: I,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bs241c_uvs/J0010+1058_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.052634Jy  sigma=31.955524
! Fit after  self-cal, rms=0.646113Jy  sigma=19.839610
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8326 mas, bmaj=2.113 mas, bpa=-10.38 degrees
! Estimated noise=0.433281 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.275484 Jy
! Component: 100  -  total flux cleaned = 0.335557 Jy
! Total flux subtracted in 100 components = 0.335557 Jy
! Clean residual min=-0.009701 max=0.017018 Jy/beam
! Clean residual mean=0.000001 rms=0.002549 Jy/beam
! Combined flux in latest and established models = 0.335557 Jy
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.335557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.050018Jy  sigma=1.413502
! Fit after  self-cal, rms=0.050014Jy  sigma=1.413413
! Inverting map 
! Added new window around map position (-5.4, 14.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0173181 Jy
! Component: 100  -  total flux cleaned = 0.0260473 Jy
! Total flux subtracted in 100 components = 0.0260473 Jy
! Clean residual min=-0.007885 max=0.010441 Jy/beam
! Clean residual mean=-0.000003 rms=0.001916 Jy/beam
! Combined flux in latest and established models = 0.361604 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.361604 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.043557Jy  sigma=1.258841
! Fit after  self-cal, rms=0.043329Jy  sigma=1.251954
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.178 mas, bmaj=2.379 mas, bpa=-3.456 degrees
! Estimated noise=0.23896 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00606626 Jy
! Component: 100  -  total flux cleaned = 0.0100813 Jy
! Component: 150  -  total flux cleaned = 0.0129585 Jy
! Component: 200  -  total flux cleaned = 0.0151321 Jy
! Total flux subtracted in 200 components = 0.0151321 Jy
! Clean residual min=-0.008530 max=0.008933 Jy/beam
! Clean residual mean=-0.000011 rms=0.002119 Jy/beam
! Combined flux in latest and established models = 0.376736 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 55 components and 0.376737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042049Jy  sigma=1.227209
! Fit after  self-cal, rms=0.041981Jy  sigma=1.225608
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.178 x 2.379 at -3.456 degrees (North through East)
! Clean map  min=-0.0085065  max=0.34664 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.08     HN        0.96     KP        0.96     
!   LA        1.03     MK        0.99     NL        0.94     OV        0.94     
!   PT        0.91     SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        0.97     KP        1.03     
!   LA        0.97     MK        1.00     NL        1.01     OV        0.95     
!   PT        0.95     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.94     HN        0.97     KP        1.04     
!   LA        0.92     MK        1.02     NL        1.01     OV        0.97     
!   PT        0.96     SC        1.03     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.09     HN        1.03     KP        0.90     
!   LA        1.00     MK        1.01     NL        0.96     OV        0.98     
!   PT        0.96     SC        1.02     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.10     HN        1.04     KP        1.10     
!   LA        0.99     MK        1.02     NL        1.08     OV        0.92     
!   PT        0.95     SC        1.01     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.13     HN        1.12     KP        1.11     
!   LA        1.03     MK        1.02     NL        1.04     OV        1.00     
!   PT        0.97     SC        1.05     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.12     HN        1.05     KP        1.12     
!   LA        0.99     MK        1.00     NL        0.89     OV        1.03     
!   PT        0.89     SC        1.01     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.06     HN        1.05     KP        1.09     
!   LA        0.96     MK        1.01     NL        0.89     OV        0.94     
!   PT        0.91     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.041981Jy  sigma=1.225608
! Fit after  self-cal, rms=0.026694Jy  sigma=0.714968
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.182 mas, bmaj=2.391 mas, bpa=-3.471 degrees
! Estimated noise=0.239629 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0025431 Jy
! Component: 100  -  total flux cleaned = -0.00333237 Jy
! Component: 150  -  total flux cleaned = -0.00378135 Jy
! Component: 200  -  total flux cleaned = -0.0040633 Jy
! Total flux subtracted in 200 components = -0.0040633 Jy
! Clean residual min=-0.002329 max=0.001842 Jy/beam
! Clean residual mean=0.000000 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.372673 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 65 components and 0.372673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026430Jy  sigma=0.705685
! Fit after  self-cal, rms=0.026417Jy  sigma=0.704786
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026417Jy  sigma=0.704786
! Fit after  self-cal, rms=0.026342Jy  sigma=0.702584
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.182 mas, bmaj=2.392 mas, bpa=-3.545 degrees
! Estimated noise=0.239447 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00176126 Jy
! Component: 100  -  total flux cleaned = -0.00206739 Jy
! Component: 150  -  total flux cleaned = -0.00238653 Jy
! Component: 200  -  total flux cleaned = -0.00266329 Jy
! Total flux subtracted in 200 components = -0.00266329 Jy
! Clean residual min=-0.001961 max=0.001445 Jy/beam
! Clean residual mean=0.000000 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.37001 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 71 components and 0.37001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026208Jy  sigma=0.697749
! Fit after  self-cal, rms=0.026200Jy  sigma=0.697238
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000381418 Jy
! Component: 100  -  total flux cleaned = -0.000576429 Jy
! Component: 150  -  total flux cleaned = -0.00076975 Jy
! Component: 200  -  total flux cleaned = -0.000923983 Jy
! Total flux subtracted in 200 components = -0.000923983 Jy
! Clean residual min=-0.001856 max=0.001710 Jy/beam
! Clean residual mean=0.000000 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.369086 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 78 components and 0.369086 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026159Jy  sigma=0.695851
! Fit after  self-cal, rms=0.026159Jy  sigma=0.695745
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026159Jy  sigma=0.695745
! Fit after  self-cal, rms=0.026092Jy  sigma=0.693655
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.182 mas, bmaj=2.392 mas, bpa=-3.618 degrees
! Estimated noise=0.239376 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00128634 Jy
! Component: 100  -  total flux cleaned = -0.00151363 Jy
! Component: 150  -  total flux cleaned = -0.00169661 Jy
! Component: 200  -  total flux cleaned = -0.00183035 Jy
! Total flux subtracted in 200 components = -0.00183035 Jy
! Clean residual min=-0.001624 max=0.001224 Jy/beam
! Clean residual mean=0.000000 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.367256 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 85 components and 0.367256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026023Jy  sigma=0.691057
! Fit after  self-cal, rms=0.026017Jy  sigma=0.690757
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000284268 Jy
! Component: 100  -  total flux cleaned = -0.000420095 Jy
! Component: 150  -  total flux cleaned = -0.000556956 Jy
! Component: 200  -  total flux cleaned = -0.000680789 Jy
! Total flux subtracted in 200 components = -0.000680789 Jy
! Clean residual min=-0.001533 max=0.001349 Jy/beam
! Clean residual mean=0.000000 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.366575 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 91 components and 0.366575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025997Jy  sigma=0.690013
! Fit after  self-cal, rms=0.025996Jy  sigma=0.689950
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025996Jy  sigma=0.689950
! Fit after  self-cal, rms=0.025955Jy  sigma=0.688747
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.276 mas, bmaj=3.25 mas, bpa=3.956 degrees
! Estimated noise=0.270792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00107487 Jy
! Component: 100  -  total flux cleaned = -0.00132997 Jy
! Component: 150  -  total flux cleaned = -0.00146412 Jy
! Component: 200  -  total flux cleaned = -0.00156537 Jy
! Total flux subtracted in 200 components = -0.00156537 Jy
! Clean residual min=-0.001702 max=0.001393 Jy/beam
! Clean residual mean=0.000000 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.36501 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 100 components and 0.36501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025925Jy  sigma=0.687397
! Fit after  self-cal, rms=0.025920Jy  sigma=0.687225
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000244442 Jy
! Component: 100  -  total flux cleaned = -0.000331727 Jy
! Component: 150  -  total flux cleaned = -0.000418691 Jy
! Component: 200  -  total flux cleaned = -0.000504133 Jy
! Total flux subtracted in 200 components = -0.000504133 Jy
! Clean residual min=-0.001585 max=0.001605 Jy/beam
! Clean residual mean=0.000000 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 0.364505 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 106 components and 0.364505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025911Jy  sigma=0.686854
! Fit after  self-cal, rms=0.025911Jy  sigma=0.686815
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.182 mas, bmaj=2.392 mas, bpa=-3.679 degrees
! Estimated noise=0.239325 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.182 x 2.392 at -3.679 degrees (North through East)
! Clean map  min=-0.00127  max=0.35001 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8355 mas, bmaj=2.116 mas, bpa=-10.53 degrees
! Estimated noise=0.431856 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.274517 Jy
! Component: 100  -  total flux cleaned = 0.33438 Jy
! Component: 150  -  total flux cleaned = 0.348939 Jy
! Component: 200  -  total flux cleaned = 0.354791 Jy
! Total flux subtracted in 200 components = 0.354791 Jy
! Clean residual min=-0.001949 max=0.002643 Jy/beam
! Clean residual mean=0.000001 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.354791 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.354791 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.182 mas, bmaj=2.392 mas, bpa=-3.679 degrees
! Estimated noise=0.239325 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00404543 Jy
! Component: 100  -  total flux cleaned = 0.00616158 Jy
! Component: 150  -  total flux cleaned = 0.0074928 Jy
! Component: 200  -  total flux cleaned = 0.00839797 Jy
! Total flux subtracted in 200 components = 0.00839797 Jy
! Clean residual min=-0.001510 max=0.001291 Jy/beam
! Clean residual mean=0.000000 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.363189 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 37 components and 0.363189 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.276 mas, bmaj=3.25 mas, bpa=3.956 degrees
! Estimated noise=0.270792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000620293 Jy
! Component: 100  -  total flux cleaned = 0.000709148 Jy
! Component: 150  -  total flux cleaned = 0.000670578 Jy
! Component: 200  -  total flux cleaned = 0.000625196 Jy
! Total flux subtracted in 200 components = 0.000625196 Jy
! Clean residual min=-0.001722 max=0.001684 Jy/beam
! Clean residual mean=0.000000 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.363814 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.9728e-05 Jy
! Component: 100  -  total flux cleaned = -2.8961e-05 Jy
! Component: 150  -  total flux cleaned = -2.9198e-05 Jy
! Component: 200  -  total flux cleaned = -3.70334e-05 Jy
! Total flux subtracted in 200 components = -3.70334e-05 Jy
! Clean residual min=-0.001686 max=0.001664 Jy/beam
! Clean residual mean=0.000000 rms=0.000477 Jy/beam
! Combined flux in latest and established models = 0.363777 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 59 components and 0.363777 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.182 mas, bmaj=2.392 mas, bpa=-3.679 degrees
! Estimated noise=0.239325 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.60339e-05 Jy
! Component: 100  -  total flux cleaned = 2.30266e-06 Jy
! Component: 150  -  total flux cleaned = -9.67502e-06 Jy
! Component: 200  -  total flux cleaned = -2.08481e-05 Jy
! Total flux subtracted in 200 components = -2.08481e-05 Jy
! Clean residual min=-0.001353 max=0.001195 Jy/beam
! Clean residual mean=0.000000 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.363756 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 68 components and 0.363756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025915Jy  sigma=0.686990
! Fit after  self-cal, rms=0.025909Jy  sigma=0.686846
wmodel /scr/pima/bs241c_uvs/J0010+1058_X_map.mod
! Writing 68 model components to file: /scr/pima/bs241c_uvs/J0010+1058_X_map.mod
wobs /scr/pima/bs241c_uvs/J0010+1058_X_uvs.fits
! Writing UV FITS file: /scr/pima/bs241c_uvs/J0010+1058_X_uvs.fits
wwins /scr/pima/bs241c_uvs/J0010+1058_X_map.win
! wwins: Wrote 2 windows to /scr/pima/bs241c_uvs/J0010+1058_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -2.88438e-05 Jy
! Component: 100  -  total flux cleaned = 3.28189e-05 Jy
! Component: 150  -  total flux cleaned = 5.16785e-05 Jy
! Component: 200  -  total flux cleaned = 5.12066e-05 Jy
! Component: 250  -  total flux cleaned = 5.16034e-05 Jy
! Component: 300  -  total flux cleaned = 6.73412e-05 Jy
! Component: 350  -  total flux cleaned = 3.66194e-05 Jy
! Component: 400  -  total flux cleaned = 3.66736e-05 Jy
! Component: 450  -  total flux cleaned = 8.53165e-06 Jy
! Component: 500  -  total flux cleaned = -1.86664e-05 Jy
! Component: 550  -  total flux cleaned = -4.48459e-05 Jy
! Component: 600  -  total flux cleaned = -8.26302e-05 Jy
! Component: 650  -  total flux cleaned = -8.26018e-05 Jy
! Component: 700  -  total flux cleaned = -5.967e-05 Jy
! Component: 750  -  total flux cleaned = 7.53618e-06 Jy
! Component: 800  -  total flux cleaned = 6.22304e-05 Jy
! Component: 850  -  total flux cleaned = 0.000146535 Jy
! Component: 900  -  total flux cleaned = 0.000218238 Jy
! Component: 950  -  total flux cleaned = 0.000278347 Jy
! Component: 1000  -  total flux cleaned = 0.0003659 Jy
! Component: 1050  -  total flux cleaned = 0.000451489 Jy
! Component: 1100  -  total flux cleaned = 0.000534976 Jy
! Component: 1150  -  total flux cleaned = 0.000634551 Jy
! Component: 1200  -  total flux cleaned = 0.000722607 Jy
! Component: 1250  -  total flux cleaned = 0.00080845 Jy
! Component: 1300  -  total flux cleaned = 0.000867173 Jy
! Component: 1350  -  total flux cleaned = 0.000949168 Jy
! Component: 1400  -  total flux cleaned = 0.00099716 Jy
! Component: 1450  -  total flux cleaned = 0.00105978 Jy
! Component: 1500  -  total flux cleaned = 0.00110564 Jy
! Component: 1550  -  total flux cleaned = 0.00113565 Jy
! Component: 1600  -  total flux cleaned = 0.00114319 Jy
! Component: 1650  -  total flux cleaned = 0.00119395 Jy
! Component: 1700  -  total flux cleaned = 0.00121535 Jy
! Component: 1750  -  total flux cleaned = 0.00123625 Jy
! Component: 1800  -  total flux cleaned = 0.00126366 Jy
! Component: 1850  -  total flux cleaned = 0.00128379 Jy
! Component: 1900  -  total flux cleaned = 0.00131669 Jy
! Component: 1950  -  total flux cleaned = 0.0013554 Jy
! Component: 2000  -  total flux cleaned = 0.00137445 Jy
! Component: 2050  -  total flux cleaned = 0.00139947 Jy
! Component: 2100  -  total flux cleaned = 0.00144267 Jy
! Component: 2150  -  total flux cleaned = 0.00147292 Jy
! Component: 2200  -  total flux cleaned = 0.00149683 Jy
! Component: 2250  -  total flux cleaned = 0.00152624 Jy
! Component: 2300  -  total flux cleaned = 0.00153782 Jy
! Component: 2350  -  total flux cleaned = 0.00157785 Jy
! Component: 2400  -  total flux cleaned = 0.00160594 Jy
! Component: 2450  -  total flux cleaned = 0.00161145 Jy
! Component: 2500  -  total flux cleaned = 0.00163348 Jy
! Component: 2550  -  total flux cleaned = 0.00165529 Jy
! Component: 2600  -  total flux cleaned = 0.00168758 Jy
! Component: 2650  -  total flux cleaned = 0.00171412 Jy
! Component: 2700  -  total flux cleaned = 0.00172988 Jy
! Component: 2750  -  total flux cleaned = 0.001761 Jy
! Component: 2800  -  total flux cleaned = 0.00177123 Jy
! Component: 2850  -  total flux cleaned = 0.00180681 Jy
! Component: 2900  -  total flux cleaned = 0.001832 Jy
! Component: 2950  -  total flux cleaned = 0.00186186 Jy
! Component: 3000  -  total flux cleaned = 0.00186184 Jy
! Component: 3050  -  total flux cleaned = 0.00188138 Jy
! Component: 3100  -  total flux cleaned = 0.00188624 Jy
! Component: 3150  -  total flux cleaned = 0.00190061 Jy
! Component: 3200  -  total flux cleaned = 0.00190532 Jy
! Component: 3250  -  total flux cleaned = 0.00190998 Jy
! Component: 3300  -  total flux cleaned = 0.00191928 Jy
! Component: 3350  -  total flux cleaned = 0.00193308 Jy
! Component: 3400  -  total flux cleaned = 0.00193765 Jy
! Component: 3450  -  total flux cleaned = 0.00195577 Jy
! Component: 3500  -  total flux cleaned = 0.00198719 Jy
! Component: 3550  -  total flux cleaned = 0.00199607 Jy
! Component: 3600  -  total flux cleaned = 0.00201375 Jy
! Component: 3650  -  total flux cleaned = 0.00204872 Jy
! Component: 3700  -  total flux cleaned = 0.00204874 Jy
! Component: 3750  -  total flux cleaned = 0.002066 Jy
! Component: 3800  -  total flux cleaned = 0.0020874 Jy
! Component: 3850  -  total flux cleaned = 0.0021044 Jy
! Component: 3900  -  total flux cleaned = 0.00212547 Jy
! Component: 3950  -  total flux cleaned = 0.00213385 Jy
! Component: 4000  -  total flux cleaned = 0.00216292 Jy
! Component: 4050  -  total flux cleaned = 0.00218765 Jy
! Total flux subtracted in 4096 components = 0.0022122 Jy
! Clean residual min=-0.000259 max=0.000347 Jy/beam
! Clean residual mean=0.000000 rms=0.000069 Jy/beam
! Combined flux in latest and established models = 0.365969 Jy
keep
! Adding 284 model components to the UV plane model.
! The established model now contains 352 components and 0.365969 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bs241c_uvs/J0010+1058_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.182 x 2.392 at -3.679 degrees (North through East)
! Clean map  min=-0.00055913  max=0.35101 Jy/beam
! Writing clean map to FITS file: /scr/pima/bs241c_uvs/J0010+1058_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.35101 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 6.55487e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0560229 0.0560229 0.112046 0.224092 0.448183 0.896367 1.79273 3.58547 7.17093 14.3419 28.6837 57.3675
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.351 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  5354.95 
quit
! Quitting program
! Log file /scr/pima/bs241c_uvs/J0010+1058_X_uvs.log closed on Thu Jul  2 09:05:07 2015