! Started logfile: /scr/pima/br149z8_uvs/J1908+1226_X_uvs.log on Tue Mar 29 13:38:48 2016 obs /scr/pima/br149z8_uvs/J1908+1226_X_uva.fits ! Reading UV FITS file: /scr/pima/br149z8_uvs/J1908+1226_X_uva.fits ! AN table 1: 13 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.380952 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1908+1226 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.10949e+09 1.28e+08 1 1.28e+08 ! 02 2 8.12349e+09 1.28e+08 1 1.28e+08 ! 03 3 8.16549e+09 1.28e+08 1 1.28e+08 ! 04 4 8.23549e+09 1.28e+08 1 1.28e+08 ! 05 5 8.31949e+09 1.28e+08 1 1.28e+08 ! 06 6 8.41749e+09 1.28e+08 1 1.28e+08 ! 07 7 8.55649e+09 1.28e+08 1 1.28e+08 ! 08 8 8.58349e+09 1.28e+08 1 1.28e+08 ! ! Polarization(s): RR ! ! Read 94 lines of history. ! ! Reading 832 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/br149z8_uvs/J1908+1226_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.000777Jy sigma=29.178071 ! Fit after self-cal, rms=0.984340Jy sigma=30.191737 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.683 mas, bmaj=54.18 mas, bpa=-28.65 degrees ! Estimated noise=1.23638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116598 Jy ! Component: 100 - total flux cleaned = 0.0125837 Jy ! Total flux subtracted in 100 components = 0.0125837 Jy ! Clean residual min=-0.001622 max=0.001636 Jy/beam ! Clean residual mean=-0.000001 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.0125837 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0125837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.017882Jy sigma=0.535214 ! Fit after self-cal, rms=0.016585Jy sigma=0.494942 ! Inverting map ! Added new window around map position (0.6, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107121 Jy ! Component: 100 - total flux cleaned = 0.00143017 Jy ! Total flux subtracted in 100 components = 0.00143017 Jy ! Clean residual min=-0.001226 max=0.001114 Jy/beam ! Clean residual mean=-0.000000 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.0140138 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 51 components and 0.0140138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015996Jy sigma=0.477957 ! Fit after self-cal, rms=0.015921Jy sigma=0.475825 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.915 mas, bmaj=48.94 mas, bpa=-28.94 degrees ! Estimated noise=1.09389 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000716568 Jy ! Component: 100 - total flux cleaned = -0.00147597 Jy ! Component: 150 - total flux cleaned = -0.00192587 Jy ! Component: 200 - total flux cleaned = -0.00199076 Jy ! Total flux subtracted in 200 components = -0.00199076 Jy ! Clean residual min=-0.000840 max=0.000903 Jy/beam ! Clean residual mean=-0.000000 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.0120231 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 94 components and 0.0120231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015752Jy sigma=0.470915 ! Fit after self-cal, rms=0.015698Jy sigma=0.469883 ! Inverting map ! Added new window around map position (-50.6, -45.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000282917 Jy ! Component: 100 - total flux cleaned = 0.000289251 Jy ! Component: 150 - total flux cleaned = 0.000242721 Jy ! Component: 200 - total flux cleaned = 0.000183322 Jy ! Total flux subtracted in 200 components = 0.000183322 Jy ! Clean residual min=-0.000625 max=0.000754 Jy/beam ! Clean residual mean=-0.000000 rms=0.000141 Jy/beam ! Combined flux in latest and established models = 0.0122064 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 149 components and 0.0122064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015607Jy sigma=0.466586 ! Fit after self-cal, rms=0.015570Jy sigma=0.465456 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.915 x 48.94 at -28.94 degrees (North through East) ! Clean map min=-0.002106 max=0.015067 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 0.96 LA 0.91 ! NL 1.02 OV 1.00* PT 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 0.88 LA 0.91 ! NL 1.07 OV 1.00* PT 0.92 ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 0.92 LA 1.02 ! NL 0.96 OV 1.00* PT 1.11 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.11 LA 1.00 ! NL 1.18 OV 1.00* PT 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* KP 1.01 LA 1.10 ! NL 0.84 OV 1.00* PT 0.96 ! ! ! Fit before self-cal, rms=0.015570Jy sigma=0.465456 ! Fit after self-cal, rms=0.015479Jy sigma=0.461953 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.92 mas, bmaj=48.83 mas, bpa=-28.96 degrees ! Estimated noise=1.06911 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.70545e-05 Jy ! Component: 100 - total flux cleaned = -0.000144997 Jy ! Component: 150 - total flux cleaned = -0.000273576 Jy ! Component: 200 - total flux cleaned = -0.00027727 Jy ! Total flux subtracted in 200 components = -0.00027727 Jy ! Clean residual min=-0.000544 max=0.000597 Jy/beam ! Clean residual mean=0.000000 rms=0.000120 Jy/beam ! Combined flux in latest and established models = 0.0119291 Jy ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 221 components and 0.0119291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015407Jy sigma=0.459930 ! Fit after self-cal, rms=0.015433Jy sigma=0.459204 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015433Jy sigma=0.459204 ! Fit after self-cal, rms=0.015410Jy sigma=0.458780 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.925 mas, bmaj=48.62 mas, bpa=-28.98 degrees ! Estimated noise=1.05365 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.5821e-06 Jy ! Component: 100 - total flux cleaned = -8.19943e-05 Jy ! Component: 150 - total flux cleaned = -9.82277e-05 Jy ! Component: 200 - total flux cleaned = -0.000124172 Jy ! Total flux subtracted in 200 components = -0.000124172 Jy ! Clean residual min=-0.000460 max=0.000501 Jy/beam ! Clean residual mean=0.000000 rms=0.000101 Jy/beam ! Combined flux in latest and established models = 0.0118049 Jy selfcal ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 268 components and 0.0118049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015361Jy sigma=0.457600 ! Fit after self-cal, rms=0.015377Jy sigma=0.457265 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.85672e-05 Jy ! Component: 100 - total flux cleaned = 5.80454e-05 Jy ! Component: 150 - total flux cleaned = 7.31207e-05 Jy ! Component: 200 - total flux cleaned = 2.10968e-05 Jy ! Total flux subtracted in 200 components = 2.10968e-05 Jy ! Clean residual min=-0.000443 max=0.000511 Jy/beam ! Clean residual mean=0.000000 rms=0.000090 Jy/beam ! Combined flux in latest and established models = 0.011826 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 310 components and 0.011826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015349Jy sigma=0.456542 ! Fit after self-cal, rms=0.015345Jy sigma=0.456347 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015345Jy sigma=0.456347 ! Fit after self-cal, rms=0.015318Jy sigma=0.456051 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.927 mas, bmaj=48.5 mas, bpa=-29 degrees ! Estimated noise=1.04212 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.20456e-05 Jy ! Component: 100 - total flux cleaned = -4.77754e-05 Jy ! Component: 150 - total flux cleaned = -3.83059e-05 Jy ! Component: 200 - total flux cleaned = 1.33464e-05 Jy ! Total flux subtracted in 200 components = 1.33464e-05 Jy ! Clean residual min=-0.000408 max=0.000483 Jy/beam ! Clean residual mean=0.000000 rms=0.000091 Jy/beam ! Combined flux in latest and established models = 0.0118394 Jy selfcal ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 367 components and 0.0118394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015292Jy sigma=0.455436 ! Fit after self-cal, rms=0.015302Jy sigma=0.455233 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115906 Jy ! Component: 100 - total flux cleaned = 0.000157119 Jy ! Component: 150 - total flux cleaned = 0.000176635 Jy ! Component: 200 - total flux cleaned = 0.000221546 Jy ! Total flux subtracted in 200 components = 0.000221546 Jy ! Clean residual min=-0.000362 max=0.000474 Jy/beam ! Clean residual mean=0.000000 rms=0.000084 Jy/beam ! Combined flux in latest and established models = 0.0120609 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 403 components and 0.0120609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015282Jy sigma=0.454727 ! Fit after self-cal, rms=0.015279Jy sigma=0.454565 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015279Jy sigma=0.454565 ! Fit after self-cal, rms=0.015280Jy sigma=0.454327 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.163 mas, bmaj=45.26 mas, bpa=-29.13 degrees ! Estimated noise=1.06508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000182954 Jy ! Component: 100 - total flux cleaned = 0.000204953 Jy ! Component: 150 - total flux cleaned = 0.000254864 Jy ! Component: 200 - total flux cleaned = 0.000284675 Jy ! Total flux subtracted in 200 components = 0.000284675 Jy ! Clean residual min=-0.000289 max=0.000398 Jy/beam ! Clean residual mean=0.000000 rms=0.000074 Jy/beam ! Combined flux in latest and established models = 0.0123456 Jy selfcal ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 447 components and 0.0123456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015262Jy sigma=0.453855 ! Fit after self-cal, rms=0.015247Jy sigma=0.452915 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215895 Jy ! Component: 100 - total flux cleaned = 0.000312771 Jy ! Component: 150 - total flux cleaned = 0.000348679 Jy ! Component: 200 - total flux cleaned = 0.000371641 Jy ! Total flux subtracted in 200 components = 0.000371641 Jy ! Clean residual min=-0.000248 max=0.000331 Jy/beam ! Clean residual mean=0.000000 rms=0.000069 Jy/beam ! Combined flux in latest and established models = 0.0127172 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 512 components and 0.0127172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015228Jy sigma=0.452068 ! Fit after self-cal, rms=0.015175Jy sigma=0.450765 ! Inverting map ! Added new window around map position (29.6, 34.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00053052 Jy ! Component: 100 - total flux cleaned = 0.000764877 Jy ! Component: 150 - total flux cleaned = 0.000937094 Jy ! Component: 200 - total flux cleaned = 0.000906159 Jy ! Total flux subtracted in 200 components = 0.000906159 Jy ! Clean residual min=-0.000212 max=0.000181 Jy/beam ! Clean residual mean=0.000000 rms=0.000074 Jy/beam ! Combined flux in latest and established models = 0.0136234 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 582 components and 0.0136234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015134Jy sigma=0.449425 ! Fit after self-cal, rms=0.015073Jy sigma=0.448823 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000405725 Jy ! Component: 100 - total flux cleaned = 0.000602873 Jy ! Component: 150 - total flux cleaned = 0.000773212 Jy ! Component: 200 - total flux cleaned = 0.000864805 Jy ! Total flux subtracted in 200 components = 0.000864805 Jy ! Clean residual min=-0.000217 max=0.000169 Jy/beam ! Clean residual mean=0.000000 rms=0.000070 Jy/beam ! Combined flux in latest and established models = 0.0144882 Jy ! Performing phase self-cal ! Adding 83 model components to the UV plane model. ! The established model now contains 662 components and 0.0144882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015043Jy sigma=0.447879 ! Fit after self-cal, rms=0.015027Jy sigma=0.447624 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159227 Jy ! Component: 100 - total flux cleaned = 0.000160322 Jy ! Component: 150 - total flux cleaned = 0.000182346 Jy ! Component: 200 - total flux cleaned = 0.000182427 Jy ! Total flux subtracted in 200 components = 0.000182427 Jy ! Clean residual min=-0.000167 max=0.000179 Jy/beam ! Clean residual mean=0.000000 rms=0.000067 Jy/beam ! Combined flux in latest and established models = 0.0146706 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 709 components and 0.0146706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.015005Jy sigma=0.447119 ! Fit after self-cal, rms=0.014997Jy sigma=0.446935 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000264785 Jy ! Component: 100 - total flux cleaned = 0.000299498 Jy ! Component: 150 - total flux cleaned = 0.000254795 Jy ! Component: 200 - total flux cleaned = 0.000263234 Jy ! Total flux subtracted in 200 components = 0.000263234 Jy ! Clean residual min=-0.000215 max=0.000153 Jy/beam ! Clean residual mean=0.000000 rms=0.000058 Jy/beam ! Combined flux in latest and established models = 0.0149339 Jy ! Performing phase self-cal ! Adding 84 model components to the UV plane model. ! The established model now contains 781 components and 0.0149339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.014978Jy sigma=0.446500 ! Fit after self-cal, rms=0.014974Jy sigma=0.446374 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186121 Jy ! Component: 100 - total flux cleaned = 0.000231543 Jy ! Component: 150 - total flux cleaned = 0.000270496 Jy ! Component: 200 - total flux cleaned = 0.00033999 Jy ! Total flux subtracted in 200 components = 0.00033999 Jy ! Clean residual min=-0.000151 max=0.000144 Jy/beam ! Clean residual mean=0.000000 rms=0.000054 Jy/beam ! Combined flux in latest and established models = 0.0152739 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 845 components and 0.0152739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.014960Jy sigma=0.446115 ! Fit after self-cal, rms=0.014959Jy sigma=0.446059 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111563 Jy ! Component: 100 - total flux cleaned = 0.0001359 Jy ! Component: 150 - total flux cleaned = 0.00016507 Jy ! Component: 200 - total flux cleaned = 0.000193936 Jy ! Total flux subtracted in 200 components = 0.000193936 Jy ! Clean residual min=-0.000199 max=0.000134 Jy/beam ! Clean residual mean=0.000000 rms=0.000049 Jy/beam ! Combined flux in latest and established models = 0.0154678 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 901 components and 0.0154678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.014949Jy sigma=0.445830 ! Fit after self-cal, rms=0.014952Jy sigma=0.445785 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125398 Jy ! Component: 100 - total flux cleaned = 0.000225044 Jy ! Component: 150 - total flux cleaned = 0.000302619 Jy ! Component: 200 - total flux cleaned = 0.000359362 Jy ! Total flux subtracted in 200 components = 0.000359362 Jy ! Clean residual min=-0.000134 max=0.000134 Jy/beam ! Clean residual mean=0.000000 rms=0.000046 Jy/beam ! Combined flux in latest and established models = 0.0158272 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 936 components and 0.0158272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.014943Jy sigma=0.445609 ! Fit after self-cal, rms=0.014945Jy sigma=0.445576 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.86158e-05 Jy ! Component: 100 - total flux cleaned = 0.000131891 Jy ! Component: 150 - total flux cleaned = 0.000194025 Jy ! Component: 200 - total flux cleaned = 0.000255927 Jy ! Total flux subtracted in 200 components = 0.000255927 Jy ! Clean residual min=-0.000143 max=0.000124 Jy/beam ! Clean residual mean=0.000000 rms=0.000042 Jy/beam ! Combined flux in latest and established models = 0.0160831 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 977 components and 0.0160831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.014937Jy sigma=0.445404 ! Fit after self-cal, rms=0.014940Jy sigma=0.445376 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.18756e-05 Jy ! Component: 100 - total flux cleaned = 0.000150819 Jy ! Component: 150 - total flux cleaned = 0.000194063 Jy ! Component: 200 - total flux cleaned = 0.000218877 Jy ! Total flux subtracted in 200 components = 0.000218877 Jy ! Clean residual min=-0.000119 max=0.000127 Jy/beam ! Clean residual mean=0.000000 rms=0.000042 Jy/beam ! Combined flux in latest and established models = 0.016302 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 1007 components and 0.016302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.014934Jy sigma=0.445231 ! Fit after self-cal, rms=0.014937Jy sigma=0.445203 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.0461e-05 Jy ! Component: 100 - total flux cleaned = 0.000133122 Jy ! Component: 150 - total flux cleaned = 0.00017914 Jy ! Component: 200 - total flux cleaned = 0.00022522 Jy ! Total flux subtracted in 200 components = 0.00022522 Jy ! Clean residual min=-0.000124 max=0.000114 Jy/beam ! Clean residual mean=0.000000 rms=0.000039 Jy/beam ! Combined flux in latest and established models = 0.0165272 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 1038 components and 0.0165272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.014931Jy sigma=0.445067 ! Fit after self-cal, rms=0.014934Jy sigma=0.445042 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.65209e-05 Jy ! Component: 100 - total flux cleaned = 0.000130891 Jy ! Component: 150 - total flux cleaned = 0.000172509 Jy ! Component: 200 - total flux cleaned = 0.000160275 Jy ! Total flux subtracted in 200 components = 0.000160275 Jy ! Clean residual min=-0.000113 max=0.000123 Jy/beam ! Clean residual mean=0.000000 rms=0.000041 Jy/beam ! Combined flux in latest and established models = 0.0166875 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 1063 components and 0.0166875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.014928Jy sigma=0.444904 ! Fit after self-cal, rms=0.014931Jy sigma=0.444876 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.86066e-05 Jy ! Component: 100 - total flux cleaned = 0.000146808 Jy ! Component: 150 - total flux cleaned = 0.000200036 Jy ! Component: 200 - total flux cleaned = 0.000217526 Jy ! Total flux subtracted in 200 components = 0.000217526 Jy ! Clean residual min=-0.000110 max=0.000119 Jy/beam ! Clean residual mean=-0.000000 rms=0.000040 Jy/beam ! Combined flux in latest and established models = 0.016905 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 1093 components and 0.016905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.014925Jy sigma=0.444732 ! Fit after self-cal, rms=0.014925Jy sigma=0.444700 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112423 Jy ! Component: 100 - total flux cleaned = 0.000181831 Jy ! Component: 150 - total flux cleaned = 0.000231343 Jy ! Component: 200 - total flux cleaned = 0.00024368 Jy ! Total flux subtracted in 200 components = 0.00024368 Jy ! Clean residual min=-0.000106 max=0.000125 Jy/beam ! Clean residual mean=0.000000 rms=0.000042 Jy/beam ! Combined flux in latest and established models = 0.0171487 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 1127 components and 0.0171487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.014919Jy sigma=0.444541 ! Fit after self-cal, rms=0.014916Jy sigma=0.444508 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.927 mas, bmaj=48.39 mas, bpa=-29.02 degrees ! Estimated noise=1.03192 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.927 x 48.39 at -29.02 degrees (North through East) ! Clean map min=-0.0020852 max=0.015026 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.678 mas, bmaj=53.83 mas, bpa=-28.73 degrees ! Estimated noise=1.17792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052375 Jy ! Component: 100 - total flux cleaned = 0.00660359 Jy ! Component: 150 - total flux cleaned = 0.00609785 Jy ! Component: 200 - total flux cleaned = 0.00541832 Jy ! Total flux subtracted in 200 components = 0.00541832 Jy ! Clean residual min=-0.002778 max=0.002766 Jy/beam ! Clean residual mean=-0.000002 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.00541832 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 61 model components to the UV plane model. ! The established model now contains 61 components and 0.00541832 Jy ! Inverting map and beam ! Estimated beam: bmin=1.927 mas, bmaj=48.39 mas, bpa=-29.02 degrees ! Estimated noise=1.03192 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116687 Jy ! Component: 100 - total flux cleaned = 0.00263582 Jy ! Component: 150 - total flux cleaned = 0.00363824 Jy ! Component: 200 - total flux cleaned = 0.00395659 Jy ! Total flux subtracted in 200 components = 0.00395659 Jy ! Clean residual min=-0.000829 max=0.000788 Jy/beam ! Clean residual mean=-0.000000 rms=0.000302 Jy/beam ! Combined flux in latest and established models = 0.00937491 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 105 components and 0.00937491 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.163 mas, bmaj=45.26 mas, bpa=-29.13 degrees ! Estimated noise=1.06508 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000659662 Jy ! Component: 100 - total flux cleaned = -0.000503361 Jy ! Component: 150 - total flux cleaned = -0.000355762 Jy ! Component: 200 - total flux cleaned = -0.000185783 Jy ! Total flux subtracted in 200 components = -0.000185783 Jy ! Clean residual min=-0.000290 max=0.000281 Jy/beam ! Clean residual mean=-0.000000 rms=0.000113 Jy/beam ! Combined flux in latest and established models = 0.00918913 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.48827e-05 Jy ! Component: 100 - total flux cleaned = -1.31126e-05 Jy ! Component: 150 - total flux cleaned = -8.51286e-05 Jy ! Component: 200 - total flux cleaned = -0.000161649 Jy ! Total flux subtracted in 200 components = -0.000161649 Jy ! Clean residual min=-0.000361 max=0.000335 Jy/beam ! Clean residual mean=-0.000000 rms=0.000102 Jy/beam ! Combined flux in latest and established models = 0.00902748 Jy ! Adding 127 model components to the UV plane model. ! The established model now contains 232 components and 0.00902748 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.927 mas, bmaj=48.39 mas, bpa=-29.02 degrees ! Estimated noise=1.03192 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149388 Jy ! Component: 100 - total flux cleaned = -0.000240898 Jy ! Component: 150 - total flux cleaned = -0.000238764 Jy ! Component: 200 - total flux cleaned = -0.000273171 Jy ! Total flux subtracted in 200 components = -0.000273171 Jy ! Clean residual min=-0.000166 max=0.000190 Jy/beam ! Clean residual mean=0.000000 rms=0.000063 Jy/beam ! Combined flux in latest and established models = 0.00875431 Jy selfcal ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 300 components and 0.00875431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.014937Jy sigma=0.445870 ! Fit after self-cal, rms=0.014933Jy sigma=0.445354 wmodel /scr/pima/br149z8_uvs/J1908+1226_X_map.mod ! Writing 300 model components to file: /scr/pima/br149z8_uvs/J1908+1226_X_map.mod wobs /scr/pima/br149z8_uvs/J1908+1226_X_uvs.fits ! Writing UV FITS file: /scr/pima/br149z8_uvs/J1908+1226_X_uvs.fits wwins /scr/pima/br149z8_uvs/J1908+1226_X_map.win ! wwins: Wrote 3 windows to /scr/pima/br149z8_uvs/J1908+1226_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104171 Jy ! Component: 100 - total flux cleaned = 0.000139765 Jy ! Component: 150 - total flux cleaned = 0.000136548 Jy ! Component: 200 - total flux cleaned = 0.000148806 Jy ! Component: 250 - total flux cleaned = 0.000151813 Jy ! Component: 300 - total flux cleaned = 0.000157758 Jy ! Component: 350 - total flux cleaned = 0.000163647 Jy ! Component: 400 - total flux cleaned = 0.000175381 Jy ! Component: 450 - total flux cleaned = 0.000187113 Jy ! Component: 500 - total flux cleaned = 0.000196003 Jy ! Component: 550 - total flux cleaned = 0.000207837 Jy ! Component: 600 - total flux cleaned = 0.000219788 Jy ! Component: 650 - total flux cleaned = 0.000225795 Jy ! Component: 700 - total flux cleaned = 0.000231857 Jy ! Component: 750 - total flux cleaned = 0.000225703 Jy ! Component: 800 - total flux cleaned = 0.00021635 Jy ! Component: 850 - total flux cleaned = 0.000216412 Jy ! Component: 900 - total flux cleaned = 0.000232505 Jy ! Component: 950 - total flux cleaned = 0.000248891 Jy ! Component: 1000 - total flux cleaned = 0.000265572 Jy ! Component: 1050 - total flux cleaned = 0.000258789 Jy ! Component: 1100 - total flux cleaned = 0.00024835 Jy ! Component: 1150 - total flux cleaned = 0.000237719 Jy ! Component: 1200 - total flux cleaned = 0.000223185 Jy ! Component: 1250 - total flux cleaned = 0.000208285 Jy ! Component: 1300 - total flux cleaned = 0.000185348 Jy ! Component: 1350 - total flux cleaned = 0.000157896 Jy ! Component: 1400 - total flux cleaned = 0.000125534 Jy ! Component: 1450 - total flux cleaned = 9.20757e-05 Jy ! Component: 1500 - total flux cleaned = 5.77047e-05 Jy ! Component: 1550 - total flux cleaned = 1.76196e-05 Jy ! Component: 1600 - total flux cleaned = -5.2991e-06 Jy ! Component: 1650 - total flux cleaned = -1.95832e-05 Jy ! Component: 1700 - total flux cleaned = -2.46778e-05 Jy ! Component: 1750 - total flux cleaned = -1.94603e-05 Jy ! Component: 1800 - total flux cleaned = -1.93497e-05 Jy ! Component: 1850 - total flux cleaned = -1.92831e-05 Jy ! Component: 1900 - total flux cleaned = -1.33772e-05 Jy ! Component: 1950 - total flux cleaned = -8.6181e-07 Jy ! Component: 2000 - total flux cleaned = 5.67096e-06 Jy ! Component: 2050 - total flux cleaned = 5.67866e-06 Jy ! Component: 2100 - total flux cleaned = 1.25836e-05 Jy ! Component: 2150 - total flux cleaned = 2.75006e-05 Jy ! Component: 2200 - total flux cleaned = 4.32166e-05 Jy ! Component: 2250 - total flux cleaned = 5.98706e-05 Jy ! Component: 2300 - total flux cleaned = 6.85824e-05 Jy ! Component: 2350 - total flux cleaned = 7.76453e-05 Jy ! Component: 2400 - total flux cleaned = 0.000106337 Jy ! Component: 2450 - total flux cleaned = 0.00012662 Jy ! Component: 2500 - total flux cleaned = 0.000137183 Jy ! Component: 2550 - total flux cleaned = 0.00015925 Jy ! Component: 2600 - total flux cleaned = 0.000182416 Jy ! Component: 2650 - total flux cleaned = 0.000206846 Jy ! Component: 2700 - total flux cleaned = 0.00023264 Jy ! Component: 2750 - total flux cleaned = 0.000246221 Jy ! Component: 2800 - total flux cleaned = 0.000274184 Jy ! Component: 2850 - total flux cleaned = 0.000303748 Jy ! Component: 2900 - total flux cleaned = 0.000334941 Jy ! Component: 2950 - total flux cleaned = 0.000367778 Jy ! Component: 3000 - total flux cleaned = 0.000384861 Jy ! Component: 3050 - total flux cleaned = 0.000420903 Jy ! Component: 3100 - total flux cleaned = 0.000458662 Jy ! Component: 3150 - total flux cleaned = 0.000498537 Jy ! Component: 3200 - total flux cleaned = 0.000540436 Jy ! Component: 3250 - total flux cleaned = 0.000584573 Jy ! Component: 3300 - total flux cleaned = 0.000607397 Jy ! Component: 3350 - total flux cleaned = 0.00065531 Jy ! Component: 3400 - total flux cleaned = 0.000705499 Jy ! Component: 3450 - total flux cleaned = 0.000758451 Jy ! Component: 3500 - total flux cleaned = 0.000814115 Jy ! Component: 3550 - total flux cleaned = 0.000873399 Jy ! Component: 3600 - total flux cleaned = 0.000904412 Jy ! Component: 3650 - total flux cleaned = 0.000969111 Jy ! Component: 3700 - total flux cleaned = 0.00103756 Jy ! Component: 3750 - total flux cleaned = 0.00110911 Jy ! Component: 3800 - total flux cleaned = 0.00118497 Jy ! Component: 3850 - total flux cleaned = 0.00122545 Jy ! Component: 3900 - total flux cleaned = 0.00130952 Jy ! Component: 3950 - total flux cleaned = 0.001353 Jy ! Component: 4000 - total flux cleaned = 0.00144418 Jy ! Component: 4050 - total flux cleaned = 0.00149273 Jy ! Total flux subtracted in 4096 components = 0.00159364 Jy ! Clean residual min=-0.002591 max=0.002579 Jy/beam ! Clean residual mean=-0.000001 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.0103479 Jy keep ! Adding 117 model components to the UV plane model. ! The established model now contains 415 components and 0.0103479 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/br149z8_uvs/J1908+1226_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.927 x 48.39 at -29.02 degrees (North through East) ! Clean map min=-0.0042349 max=0.0090933 Jy/beam ! Writing clean map to FITS file: /scr/pima/br149z8_uvs/J1908+1226_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.00909332 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0010795 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -35.614 35.614 71.2279 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0032 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.009 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 8.423 quit ! Quitting program ! Log file /scr/pima/br149z8_uvs/J1908+1226_X_uvs.log closed on Tue Mar 29 13:38:59 2016