! Started logfile: .//J0639+7324_X_dfm.log on Wed Aug 15 15:29:22 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs .//J0639+7324_X_uva.fits ! Reading UV FITS file: .//J0639+7324_X_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0639+7324 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 8640 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0639+7324_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=1.454017Jy sigma=24.395277 ! Fit after self-cal, rms=0.158054Jy sigma=2.616488 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6777 mas, bmaj=2.061 mas, bpa=-77.78 degrees ! Estimated noise=0.752744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.786195 Jy ! Component: 100 - total flux cleaned = 0.965591 Jy ! Total flux subtracted in 100 components = 0.965591 Jy ! Clean residual min=-0.028920 max=0.068079 Jy/beam ! Clean residual mean=0.000063 rms=0.007260 Jy/beam ! Combined flux in latest and established models = 0.965591 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.965591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.169489Jy sigma=2.875448 ! Fit after self-cal, rms=0.169452Jy sigma=2.874294 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0753417 Jy ! Component: 100 - total flux cleaned = 0.115655 Jy ! Total flux subtracted in 100 components = 0.115655 Jy ! Clean residual min=-0.020368 max=0.035022 Jy/beam ! Clean residual mean=0.000033 rms=0.004792 Jy/beam ! Combined flux in latest and established models = 1.08125 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 1.08125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121162Jy sigma=1.998822 ! Fit after self-cal, rms=0.120575Jy sigma=1.993576 ! Inverting map ! Added new window around map position (-1.6, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0327745 Jy ! Component: 100 - total flux cleaned = 0.0532538 Jy ! Total flux subtracted in 100 components = 0.0532538 Jy ! Clean residual min=-0.017668 max=0.026375 Jy/beam ! Clean residual mean=0.000018 rms=0.004060 Jy/beam ! Combined flux in latest and established models = 1.1345 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 1.1345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107641Jy sigma=1.750890 ! Fit after self-cal, rms=0.106580Jy sigma=1.733973 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8592 mas, bmaj=2.452 mas, bpa=-79.39 degrees ! Estimated noise=0.46712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0264554 Jy ! Component: 100 - total flux cleaned = 0.0425439 Jy ! Component: 150 - total flux cleaned = 0.048647 Jy ! Component: 200 - total flux cleaned = 0.0512205 Jy ! Total flux subtracted in 200 components = 0.0512205 Jy ! Clean residual min=-0.018863 max=0.024734 Jy/beam ! Clean residual mean=0.000019 rms=0.004487 Jy/beam ! Combined flux in latest and established models = 1.18572 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 38 components and 1.18572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099119Jy sigma=1.598192 ! Fit after self-cal, rms=0.098477Jy sigma=1.586638 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8592 x 2.452 at -79.39 degrees (North through East) ! Clean map min=-0.016095 max=1.0302 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.97 KP 1.04 ! LA 1.01 MK 1.04 NL 1.10 OV 0.93 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.95 KP 1.05 ! LA 1.00 MK 1.04 NL 1.09 OV 0.93 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.96 KP 1.04 ! LA 1.01 MK 1.02 NL 1.11 OV 0.93 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.94 KP 1.04 ! LA 1.00 MK 1.05 NL 1.10 OV 0.93 ! PT 0.96 SC 0.95 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.97 KP 1.03 ! LA 1.01 MK 1.02 NL 1.11 OV 0.92 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.96 KP 1.06 ! LA 1.01 MK 1.03 NL 1.10 OV 0.92 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.96 KP 1.05 ! LA 1.00 MK 1.04 NL 1.10 OV 0.93 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 0.96 KP 1.05 ! LA 1.00 MK 1.01 NL 1.11 OV 0.93 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.97 KP 1.04 ! LA 1.01 MK 1.01 NL 1.09 OV 0.91 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.97 KP 1.02 ! LA 1.01 MK 1.03 NL 1.09 OV 0.93 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.96 KP 1.04 ! LA 1.00 MK 1.02 NL 1.08 OV 0.92 ! PT 0.96 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.98 KP 1.02 ! LA 1.01 MK 1.02 NL 1.11 OV 0.92 ! PT 0.96 SC 0.98 ! ! ! Fit before self-cal, rms=0.098477Jy sigma=1.586638 ! Fit after self-cal, rms=0.072936Jy sigma=1.136464 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8571 mas, bmaj=2.452 mas, bpa=-79.66 degrees ! Estimated noise=0.465553 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0032748 Jy ! Component: 100 - total flux cleaned = 0.00258159 Jy ! Component: 150 - total flux cleaned = 0.0015491 Jy ! Component: 200 - total flux cleaned = -0.000154172 Jy ! Total flux subtracted in 200 components = -0.000154172 Jy ! Clean residual min=-0.008457 max=0.009308 Jy/beam ! Clean residual mean=0.000008 rms=0.001821 Jy/beam ! Combined flux in latest and established models = 1.18557 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 1.18557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069562Jy sigma=1.082566 ! Fit after self-cal, rms=0.069068Jy sigma=1.076138 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069068Jy sigma=1.076138 ! Fit after self-cal, rms=0.068233Jy sigma=1.068673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.855 mas, bmaj=2.449 mas, bpa=-79.69 degrees ! Estimated noise=0.465202 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011016 Jy ! Component: 100 - total flux cleaned = 0.000641031 Jy ! Component: 150 - total flux cleaned = 0.000133206 Jy ! Component: 200 - total flux cleaned = -0.000170094 Jy ! Total flux subtracted in 200 components = -0.000170094 Jy ! Clean residual min=-0.007230 max=0.007730 Jy/beam ! Clean residual mean=0.000009 rms=0.001589 Jy/beam ! Combined flux in latest and established models = 1.1854 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 66 components and 1.1854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066740Jy sigma=1.044648 ! Fit after self-cal, rms=0.066527Jy sigma=1.041965 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.6, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00771344 Jy ! Component: 100 - total flux cleaned = 0.0103852 Jy ! Component: 150 - total flux cleaned = 0.0123997 Jy ! Component: 200 - total flux cleaned = 0.0137097 Jy ! Total flux subtracted in 200 components = 0.0137097 Jy ! Clean residual min=-0.006201 max=0.006606 Jy/beam ! Clean residual mean=0.000007 rms=0.001363 Jy/beam ! Combined flux in latest and established models = 1.19911 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 86 components and 1.19911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065420Jy sigma=1.022153 ! Fit after self-cal, rms=0.065354Jy sigma=1.021384 ! Inverting map ! Added new window around map position (-38.6, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00459043 Jy ! Component: 100 - total flux cleaned = 0.00609253 Jy ! Component: 150 - total flux cleaned = 0.00716407 Jy ! Component: 200 - total flux cleaned = 0.00813949 Jy ! Total flux subtracted in 200 components = 0.00813949 Jy ! Clean residual min=-0.005663 max=0.005921 Jy/beam ! Clean residual mean=0.000009 rms=0.001261 Jy/beam ! Combined flux in latest and established models = 1.20725 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 104 components and 1.20725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064666Jy sigma=1.011180 ! Fit after self-cal, rms=0.064645Jy sigma=1.010943 ! Inverting map ! Added new window around map position (-15.6, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0048268 Jy ! Component: 100 - total flux cleaned = 0.00564811 Jy ! Component: 150 - total flux cleaned = 0.00608529 Jy ! Component: 200 - total flux cleaned = 0.00669565 Jy ! Total flux subtracted in 200 components = 0.00669565 Jy ! Clean residual min=-0.005335 max=0.005686 Jy/beam ! Clean residual mean=0.000006 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 1.21394 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 136 components and 1.21394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064027Jy sigma=1.001749 ! Fit after self-cal, rms=0.064009Jy sigma=1.001432 ! Inverting map ! Added new window around map position (17.4, 11.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00478535 Jy ! Component: 100 - total flux cleaned = 0.00652145 Jy ! Component: 150 - total flux cleaned = 0.00712819 Jy ! Component: 200 - total flux cleaned = 0.0077856 Jy ! Total flux subtracted in 200 components = 0.0077856 Jy ! Clean residual min=-0.004936 max=0.004794 Jy/beam ! Clean residual mean=0.000002 rms=0.001073 Jy/beam ! Combined flux in latest and established models = 1.22173 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 154 components and 1.22173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063527Jy sigma=0.993292 ! Fit after self-cal, rms=0.063512Jy sigma=0.993056 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063512Jy sigma=0.993056 ! Fit after self-cal, rms=0.062518Jy sigma=0.978219 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8537 mas, bmaj=2.449 mas, bpa=-79.75 degrees ! Estimated noise=0.464582 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000512106 Jy ! Component: 100 - total flux cleaned = 0.000926953 Jy ! Component: 150 - total flux cleaned = 0.00148458 Jy ! Component: 200 - total flux cleaned = 0.00181711 Jy ! Total flux subtracted in 200 components = 0.00181711 Jy ! Clean residual min=-0.003911 max=0.003853 Jy/beam ! Clean residual mean=-0.000001 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 1.22354 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 166 components and 1.22354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062178Jy sigma=0.972791 ! Fit after self-cal, rms=0.062164Jy sigma=0.972612 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000629547 Jy ! Component: 100 - total flux cleaned = -0.000555569 Jy ! Component: 150 - total flux cleaned = -0.000413891 Jy ! Component: 200 - total flux cleaned = -0.000214435 Jy ! Total flux subtracted in 200 components = -0.000214435 Jy ! Clean residual min=-0.003816 max=0.003707 Jy/beam ! Clean residual mean=-0.000001 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 1.22333 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 181 components and 1.22333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062001Jy sigma=0.970282 ! Fit after self-cal, rms=0.061995Jy sigma=0.970223 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061995Jy sigma=0.970223 ! Fit after self-cal, rms=0.061877Jy sigma=0.969377 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.032 mas, bmaj=3.652 mas, bpa=-78.2 degrees ! Estimated noise=0.581873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00142934 Jy ! Component: 100 - total flux cleaned = 0.00189608 Jy ! Component: 150 - total flux cleaned = 0.00210331 Jy ! Component: 200 - total flux cleaned = 0.00229205 Jy ! Total flux subtracted in 200 components = 0.00229205 Jy ! Clean residual min=-0.004463 max=0.005476 Jy/beam ! Clean residual mean=-0.000003 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 1.22562 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 194 components and 1.22562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061795Jy sigma=0.967628 ! Fit after self-cal, rms=0.061789Jy sigma=0.967556 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.2, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00443939 Jy ! Component: 100 - total flux cleaned = 0.00518808 Jy ! Component: 150 - total flux cleaned = 0.00519882 Jy ! Component: 200 - total flux cleaned = 0.00487956 Jy ! Total flux subtracted in 200 components = 0.00487956 Jy ! Clean residual min=-0.003480 max=0.003689 Jy/beam ! Clean residual mean=-0.000007 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 1.2305 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 224 components and 1.2305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061523Jy sigma=0.962681 ! Fit after self-cal, rms=0.061505Jy sigma=0.962400 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8532 mas, bmaj=2.449 mas, bpa=-79.77 degrees ! Estimated noise=0.464544 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8532 x 2.449 at -79.77 degrees (North through East) ! Clean map min=-0.0035975 max=1.0285 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061505Jy sigma=0.962400 ! Fit after self-cal, rms=0.058263Jy sigma=0.906167 ! Inverting map and beam ! Estimated beam: bmin=0.8532 mas, bmaj=2.449 mas, bpa=-79.76 degrees ! Estimated noise=0.464691 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156381 Jy ! Component: 100 - total flux cleaned = 0.00191476 Jy ! Component: 150 - total flux cleaned = 0.00191389 Jy ! Component: 200 - total flux cleaned = 0.0019118 Jy ! Total flux subtracted in 200 components = 0.0019118 Jy ! Clean residual min=-0.002996 max=0.003008 Jy/beam ! Clean residual mean=-0.000004 rms=0.000628 Jy/beam ! Combined flux in latest and established models = 1.23241 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 251 components and 1.23241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058030Jy sigma=0.902644 ! Fit after self-cal, rms=0.058026Jy sigma=0.902585 ! Inverting map ! Added new window around map position (17.4, -12.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00223495 Jy ! Component: 100 - total flux cleaned = 0.00246049 Jy ! Component: 150 - total flux cleaned = 0.00286578 Jy ! Component: 200 - total flux cleaned = 0.00299194 Jy ! Total flux subtracted in 200 components = 0.00299194 Jy ! Clean residual min=-0.002673 max=0.002659 Jy/beam ! Clean residual mean=-0.000004 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 1.2354 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 269 components and 1.2354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057825Jy sigma=0.899279 ! Fit after self-cal, rms=0.057822Jy sigma=0.899238 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057822Jy sigma=0.899238 ! Fit after self-cal, rms=0.057805Jy sigma=0.898997 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6743 mas, bmaj=2.059 mas, bpa=-78.17 degrees ! Estimated noise=0.745026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.777902 Jy ! Component: 100 - total flux cleaned = 0.95756 Jy ! Component: 150 - total flux cleaned = 1.03665 Jy ! Component: 200 - total flux cleaned = 1.08145 Jy ! Total flux subtracted in 200 components = 1.08145 Jy ! Clean residual min=-0.010272 max=0.022972 Jy/beam ! Clean residual mean=0.000030 rms=0.002754 Jy/beam ! Combined flux in latest and established models = 1.08145 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.08145 Jy ! Inverting map and beam ! Estimated beam: bmin=0.853 mas, bmaj=2.449 mas, bpa=-79.78 degrees ! Estimated noise=0.464813 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410681 Jy ! Component: 100 - total flux cleaned = 0.0637532 Jy ! Component: 150 - total flux cleaned = 0.0776392 Jy ! Component: 200 - total flux cleaned = 0.0874648 Jy ! Total flux subtracted in 200 components = 0.0874648 Jy ! Clean residual min=-0.005479 max=0.006731 Jy/beam ! Clean residual mean=0.000026 rms=0.001489 Jy/beam ! Combined flux in latest and established models = 1.16892 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 46 components and 1.16892 Jy ! Inverting map ! Added new window around map position (42.6, -34.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00809579 Jy ! Component: 100 - total flux cleaned = 0.014932 Jy ! Component: 150 - total flux cleaned = 0.0209163 Jy ! Component: 200 - total flux cleaned = 0.026245 Jy ! Total flux subtracted in 200 components = 0.026245 Jy ! Clean residual min=-0.004494 max=0.004103 Jy/beam ! Clean residual mean=0.000014 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 1.19516 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 77 components and 1.19516 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.032 mas, bmaj=3.652 mas, bpa=-78.21 degrees ! Estimated noise=0.582344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00814549 Jy ! Component: 100 - total flux cleaned = 0.0141907 Jy ! Component: 150 - total flux cleaned = 0.0189652 Jy ! Component: 200 - total flux cleaned = 0.0228992 Jy ! Total flux subtracted in 200 components = 0.0228992 Jy ! Clean residual min=-0.004210 max=0.004452 Jy/beam ! Clean residual mean=0.000006 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 1.21806 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329336 Jy ! Component: 100 - total flux cleaned = 0.00556449 Jy ! Component: 150 - total flux cleaned = 0.00730489 Jy ! Component: 200 - total flux cleaned = 0.00889826 Jy ! Total flux subtracted in 200 components = 0.00889826 Jy ! Clean residual min=-0.003593 max=0.003535 Jy/beam ! Clean residual mean=-0.000001 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 1.22696 Jy ! Adding 106 model components to the UV plane model. ! The established model now contains 173 components and 1.22696 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.853 mas, bmaj=2.449 mas, bpa=-79.78 degrees ! Estimated noise=0.464813 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000864979 Jy ! Component: 100 - total flux cleaned = 0.00180376 Jy ! Component: 150 - total flux cleaned = 0.00275704 Jy ! Component: 200 - total flux cleaned = 0.0032394 Jy ! Total flux subtracted in 200 components = 0.0032394 Jy ! Clean residual min=-0.003078 max=0.002844 Jy/beam ! Clean residual mean=-0.000000 rms=0.000678 Jy/beam ! Combined flux in latest and established models = 1.2302 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 202 components and 1.2302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058344Jy sigma=0.906314 ! Fit after self-cal, rms=0.058292Jy sigma=0.905341 wmodel J0639+7324_X_map.mod ! Writing 202 model components to file: J0639+7324_X_map.mod wobs J0639+7324_X_uvs.fits ! Writing UV FITS file: J0639+7324_X_uvs.fits wwins J0639+7324_X_map.win ! wwins: Wrote 10 windows to J0639+7324_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000790341 Jy ! Component: 100 - total flux cleaned = -0.00125238 Jy ! Component: 150 - total flux cleaned = -0.00154312 Jy ! Component: 200 - total flux cleaned = -0.00182209 Jy ! Component: 250 - total flux cleaned = -0.00204693 Jy ! Component: 300 - total flux cleaned = -0.00222193 Jy ! Component: 350 - total flux cleaned = -0.0023924 Jy ! Component: 400 - total flux cleaned = -0.00259989 Jy ! Component: 450 - total flux cleaned = -0.00280244 Jy ! Component: 500 - total flux cleaned = -0.0029214 Jy ! Component: 550 - total flux cleaned = -0.00299896 Jy ! Component: 600 - total flux cleaned = -0.00315057 Jy ! Component: 650 - total flux cleaned = -0.00326144 Jy ! Component: 700 - total flux cleaned = -0.00336871 Jy ! Component: 750 - total flux cleaned = -0.00333263 Jy ! Component: 800 - total flux cleaned = -0.00336721 Jy ! Component: 850 - total flux cleaned = -0.00333312 Jy ! Component: 900 - total flux cleaned = -0.00346755 Jy ! Component: 950 - total flux cleaned = -0.00346816 Jy ! Component: 1000 - total flux cleaned = -0.00353335 Jy ! Component: 1050 - total flux cleaned = -0.00362799 Jy ! Component: 1100 - total flux cleaned = -0.00359685 Jy ! Component: 1150 - total flux cleaned = -0.00362801 Jy ! Component: 1200 - total flux cleaned = -0.00377747 Jy ! Component: 1250 - total flux cleaned = -0.00374722 Jy ! Component: 1300 - total flux cleaned = -0.00380508 Jy ! Component: 1350 - total flux cleaned = -0.00374715 Jy ! Component: 1400 - total flux cleaned = -0.00371888 Jy ! Component: 1450 - total flux cleaned = -0.00369074 Jy ! Component: 1500 - total flux cleaned = -0.003663 Jy ! Component: 1550 - total flux cleaned = -0.00360902 Jy ! Component: 1600 - total flux cleaned = -0.00360899 Jy ! Component: 1650 - total flux cleaned = -0.00353 Jy ! Component: 1700 - total flux cleaned = -0.00347832 Jy ! Component: 1750 - total flux cleaned = -0.0033508 Jy ! Component: 1800 - total flux cleaned = -0.00345271 Jy ! Component: 1850 - total flux cleaned = -0.00345288 Jy ! Component: 1900 - total flux cleaned = -0.00342829 Jy ! Component: 1950 - total flux cleaned = -0.00352601 Jy ! Component: 2000 - total flux cleaned = -0.00357392 Jy ! Component: 2050 - total flux cleaned = -0.00364467 Jy ! Component: 2100 - total flux cleaned = -0.00371514 Jy ! Component: 2150 - total flux cleaned = -0.00380774 Jy ! Component: 2200 - total flux cleaned = -0.00387658 Jy ! Component: 2250 - total flux cleaned = -0.00387633 Jy ! Component: 2300 - total flux cleaned = -0.00396577 Jy ! Component: 2350 - total flux cleaned = -0.0040102 Jy ! Component: 2400 - total flux cleaned = -0.0039663 Jy ! Component: 2450 - total flux cleaned = -0.00405279 Jy ! Component: 2500 - total flux cleaned = -0.00411683 Jy ! Component: 2550 - total flux cleaned = -0.00407423 Jy ! Component: 2600 - total flux cleaned = -0.00417895 Jy ! Component: 2650 - total flux cleaned = -0.0041789 Jy ! Component: 2700 - total flux cleaned = -0.00424025 Jy ! Component: 2750 - total flux cleaned = -0.00417915 Jy ! Component: 2800 - total flux cleaned = -0.00419951 Jy ! Component: 2850 - total flux cleaned = -0.00415958 Jy ! Component: 2900 - total flux cleaned = -0.00415958 Jy ! Component: 2950 - total flux cleaned = -0.00423829 Jy ! Component: 3000 - total flux cleaned = -0.00419958 Jy ! Component: 3050 - total flux cleaned = -0.0041994 Jy ! Component: 3100 - total flux cleaned = -0.00414228 Jy ! Component: 3150 - total flux cleaned = -0.00419887 Jy ! Component: 3200 - total flux cleaned = -0.00419889 Jy ! Component: 3250 - total flux cleaned = -0.00412472 Jy ! Component: 3300 - total flux cleaned = -0.00419857 Jy ! Component: 3350 - total flux cleaned = -0.00423453 Jy ! Component: 3400 - total flux cleaned = -0.0041803 Jy ! Component: 3450 - total flux cleaned = -0.00425174 Jy ! Component: 3500 - total flux cleaned = -0.00434035 Jy ! Component: 3550 - total flux cleaned = -0.00437519 Jy ! Component: 3600 - total flux cleaned = -0.00434013 Jy ! Component: 3650 - total flux cleaned = -0.00444387 Jy ! Component: 3700 - total flux cleaned = -0.00440946 Jy ! Component: 3750 - total flux cleaned = -0.00444363 Jy ! Component: 3800 - total flux cleaned = -0.00452817 Jy ! Component: 3850 - total flux cleaned = -0.00447779 Jy ! Component: 3900 - total flux cleaned = -0.00451106 Jy ! Component: 3950 - total flux cleaned = -0.00452753 Jy ! Component: 4000 - total flux cleaned = -0.00451106 Jy ! Component: 4050 - total flux cleaned = -0.00457638 Jy ! Total flux subtracted in 4096 components = -0.00454394 Jy ! Clean residual min=-0.001004 max=0.000874 Jy/beam ! Clean residual mean=0.000001 rms=0.000288 Jy/beam ! Combined flux in latest and established models = 1.22566 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 490 components and 1.22566 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap .//J0639+7324_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.853 x 2.449 at -79.78 degrees (North through East) ! Clean map min=-0.0022011 max=1.0322 Jy/beam ! Writing clean map to FITS file: .//J0639+7324_X_map.fits wmodel .//J0639+7324_X_map.mod ! Writing 490 model components to file: .//J0639+7324_X_map.mod wobs .//J0639+7324_X_uvs.fits ! Writing UV FITS file: .//J0639+7324_X_uvs.fits wwins .//J0639+7324_X_map.win ! wwins: Wrote 11 windows to .//J0639+7324_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.03223 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000287048 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0834255 0.0834255 0.166851 0.333702 0.667404 1.33481 2.66962 5.33923 10.6785 21.3569 42.7139 85.4277 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.032 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3596.02 quit ! Quitting program ! Log file .//J0639+7324_X_dfm.log closed on Wed Aug 15 15:29:27 2018