! Started logfile: .//J0319+4130_L_dfm.log on Wed Aug 15 15:26:41 2018 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 1.31600 obs .//J0319+4130_L_uva.fits ! Reading UV FITS file: .//J0319+4130_L_uva.fits ! AN table 1: 108 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.899383 visibilities/baseline/integration-bin. ! Found source: J0319+4130 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 1.316e+09 3.2e+07 1 3.2e+07 ! 02 2 1.348e+09 3.2e+07 1 3.2e+07 ! 03 3 1.38e+09 3.2e+07 1 3.2e+07 ! 04 4 1.412e+09 3.2e+07 1 3.2e+07 ! 05 5 1.444e+09 3.2e+07 1 3.2e+07 ! 06 6 1.476e+09 3.2e+07 1 3.2e+07 ! 07 7 1.508e+09 3.2e+07 1 3.2e+07 ! 08 8 1.54e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): I ! ! Read 3 lines of history. ! ! Reading 34968 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Polarization RR is unavailable. ! Restricting channel ranges to the available 8 channels. ! Selecting polarization: I, channels: 1..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0319+4130_L] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 180 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=8.539548Jy sigma=70.565866 ! Fit after self-cal, rms=7.726738Jy sigma=59.693789 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.854 mas, bmaj=7.149 mas, bpa=-2.828 degrees ! Estimated noise=0.460914 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.23414 Jy ! Component: 100 - total flux cleaned = 3.50744 Jy ! Total flux subtracted in 100 components = 3.50744 Jy ! Clean residual min=-0.395224 max=1.227820 Jy/beam ! Clean residual mean=-0.000798 rms=0.073577 Jy/beam ! Combined flux in latest and established models = 3.50744 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 3.50744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=6.143650Jy sigma=44.994987 ! Fit after self-cal, rms=6.105325Jy sigma=44.855367 ! Inverting map ! Added new window around map position (0.5, 11.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.23525 Jy ! Component: 100 - total flux cleaned = 2.13418 Jy ! Total flux subtracted in 100 components = 2.13418 Jy ! Clean residual min=-0.238034 max=0.530769 Jy/beam ! Clean residual mean=-0.000641 rms=0.052509 Jy/beam ! Combined flux in latest and established models = 5.64162 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 48 components and 5.64162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=4.957357Jy sigma=34.262137 ! Fit after self-cal, rms=4.885633Jy sigma=33.576233 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.815663 Jy ! Component: 100 - total flux cleaned = 1.45164 Jy ! Total flux subtracted in 100 components = 1.45164 Jy ! Clean residual min=-0.181140 max=0.384472 Jy/beam ! Clean residual mean=-0.000535 rms=0.039654 Jy/beam ! Combined flux in latest and established models = 7.09326 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 71 components and 7.09326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=4.125946Jy sigma=26.687029 ! Fit after self-cal, rms=4.107604Jy sigma=26.528414 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.557878 Jy ! Component: 100 - total flux cleaned = 1.01987 Jy ! Total flux subtracted in 100 components = 1.01987 Jy ! Clean residual min=-0.141849 max=0.312184 Jy/beam ! Clean residual mean=-0.000460 rms=0.032545 Jy/beam ! Combined flux in latest and established models = 8.11313 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 95 components and 8.11313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=3.611721Jy sigma=22.096106 ! Fit after self-cal, rms=3.603238Jy sigma=22.013370 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.413407 Jy ! Component: 100 - total flux cleaned = 0.762899 Jy ! Total flux subtracted in 100 components = 0.762899 Jy ! Clean residual min=-0.114094 max=0.278903 Jy/beam ! Clean residual mean=-0.000406 rms=0.027759 Jy/beam ! Combined flux in latest and established models = 8.87603 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 113 components and 8.87603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=3.263544Jy sigma=19.015819 ! Fit after self-cal, rms=3.258838Jy sigma=18.968362 ! Inverting map ! Added new window around map position (5, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.331655 Jy ! Component: 100 - total flux cleaned = 0.608258 Jy ! Total flux subtracted in 100 components = 0.608258 Jy ! Clean residual min=-0.098731 max=0.210302 Jy/beam ! Clean residual mean=-0.000360 rms=0.024049 Jy/beam ! Combined flux in latest and established models = 9.48429 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 128 components and 9.48429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=3.012552Jy sigma=16.765307 ! Fit after self-cal, rms=3.009909Jy sigma=16.731254 ! Inverting map ! Added new window around map position (-4.5, 2.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.260709 Jy ! Component: 100 - total flux cleaned = 0.479761 Jy ! Total flux subtracted in 100 components = 0.479761 Jy ! Clean residual min=-0.085606 max=0.135882 Jy/beam ! Clean residual mean=-0.000323 rms=0.021261 Jy/beam ! Combined flux in latest and established models = 9.96405 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 140 components and 9.96405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.833762Jy sigma=15.168286 ! Fit after self-cal, rms=2.831946Jy sigma=15.144840 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.199106 Jy ! Component: 100 - total flux cleaned = 0.370679 Jy ! Total flux subtracted in 100 components = 0.370679 Jy ! Clean residual min=-0.078147 max=0.111407 Jy/beam ! Clean residual mean=-0.000296 rms=0.019637 Jy/beam ! Combined flux in latest and established models = 10.3347 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 152 components and 10.3347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.706477Jy sigma=14.109510 ! Fit after self-cal, rms=2.705503Jy sigma=14.098201 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.156125 Jy ! Component: 100 - total flux cleaned = 0.292205 Jy ! Total flux subtracted in 100 components = 0.292205 Jy ! Clean residual min=-0.071838 max=0.099165 Jy/beam ! Clean residual mean=-0.000275 rms=0.018692 Jy/beam ! Combined flux in latest and established models = 10.6269 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 166 components and 10.6269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.613995Jy sigma=13.400845 ! Fit after self-cal, rms=2.613383Jy sigma=13.394429 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.956 mas, bmaj=8.642 mas, bpa=-2.007 degrees ! Estimated noise=0.35937 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.405222 Jy ! Component: 100 - total flux cleaned = 0.716124 Jy ! Component: 150 - total flux cleaned = 0.964031 Jy ! Component: 200 - total flux cleaned = 1.16603 Jy ! Total flux subtracted in 200 components = 1.16603 Jy ! Clean residual min=-0.083415 max=0.195877 Jy/beam ! Clean residual mean=-0.001315 rms=0.031809 Jy/beam ! Combined flux in latest and established models = 11.793 Jy ! Performing phase self-cal ! Adding 113 model components to the UV plane model. ! The established model now contains 263 components and 11.793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.333415Jy sigma=11.693339 ! Fit after self-cal, rms=2.333705Jy sigma=11.671544 ! Inverting map ! Added new window around map position (-1, -12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203951 Jy ! Component: 100 - total flux cleaned = 0.363576 Jy ! Component: 150 - total flux cleaned = 0.502113 Jy ! Component: 200 - total flux cleaned = 0.623799 Jy ! Total flux subtracted in 200 components = 0.623799 Jy ! Clean residual min=-0.085910 max=0.131330 Jy/beam ! Clean residual mean=-0.000961 rms=0.026241 Jy/beam ! Combined flux in latest and established models = 12.4168 Jy ! Performing phase self-cal ! Adding 120 model components to the UV plane model. ! The established model now contains 371 components and 12.4168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=2.242884Jy sigma=11.118284 ! Fit after self-cal, rms=2.241689Jy sigma=11.092138 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.956 x 8.642 at -2.007 degrees (North through East) ! Clean map min=-0.082589 max=4.3229 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 0.96 KP 0.58 ! LA 0.78 MK 1.02 NL 1.05 OV 1.01 ! PT 0.82 SC 0.76 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 HN 1.18 KP 0.98 ! LA 1.09 MK 1.13 NL 1.00 OV 0.99 ! PT 0.89 SC 0.78 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.99 HN 1.07 KP 0.97 ! LA 1.04 MK 1.06 NL 1.07 OV 0.95 ! PT 0.91 SC 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.03 HN 1.01 KP 0.95 ! LA 0.99 MK 1.03 NL 0.95 OV 0.95 ! PT 0.97 SC 0.89 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.08 HN 1.12 KP 1.08 ! LA 0.96 MK 0.93 NL 1.13 OV 1.04 ! PT 0.97 SC 1.00* ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.06 HN 1.14 KP 1.06 ! LA 1.00 MK 1.07 NL 1.05 OV 1.06 ! PT 0.95 SC 1.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00 HN 1.07 KP 1.04 ! LA 0.88 MK 0.99 NL 1.13 OV 1.00 ! PT 0.90 SC 1.00* ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 0.96 KP 0.99 ! LA 0.92 MK 0.88 NL 1.04 OV 0.98 ! PT 0.86 SC 1.00* ! ! ! Fit before self-cal, rms=2.241689Jy sigma=11.092138 ! Fit after self-cal, rms=0.823145Jy sigma=6.021748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.959 mas, bmaj=8.545 mas, bpa=-0.349 degrees ! Estimated noise=0.358346 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106194 Jy ! Component: 100 - total flux cleaned = 0.0295556 Jy ! Component: 150 - total flux cleaned = 0.0451097 Jy ! Component: 200 - total flux cleaned = 0.0559042 Jy ! Total flux subtracted in 200 components = 0.0559042 Jy ! Clean residual min=-0.037775 max=0.044408 Jy/beam ! Clean residual mean=-0.000151 rms=0.010711 Jy/beam ! Combined flux in latest and established models = 12.4727 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 396 components and 12.4727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.814130Jy sigma=5.809742 ! Fit after self-cal, rms=0.813103Jy sigma=5.801539 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.813103Jy sigma=5.801539 ! Fit after self-cal, rms=0.622386Jy sigma=4.452882 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.938 mas, bmaj=8.647 mas, bpa=-0.9939 degrees ! Estimated noise=0.360783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0312124 Jy ! Component: 100 - total flux cleaned = 0.0460051 Jy ! Component: 150 - total flux cleaned = 0.0524831 Jy ! Component: 200 - total flux cleaned = 0.0556569 Jy ! Total flux subtracted in 200 components = 0.0556569 Jy ! Clean residual min=-0.025850 max=0.031127 Jy/beam ! Clean residual mean=0.000134 rms=0.007689 Jy/beam ! Combined flux in latest and established models = 12.5283 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 421 components and 12.5283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.617542Jy sigma=4.410045 ! Fit after self-cal, rms=0.617473Jy sigma=4.408185 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00384293 Jy ! Component: 100 - total flux cleaned = 0.0070984 Jy ! Component: 150 - total flux cleaned = 0.00906028 Jy ! Component: 200 - total flux cleaned = 0.0113288 Jy ! Total flux subtracted in 200 components = 0.0113288 Jy ! Clean residual min=-0.026048 max=0.030594 Jy/beam ! Clean residual mean=0.000138 rms=0.007633 Jy/beam ! Combined flux in latest and established models = 12.5397 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 434 components and 12.5397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.615956Jy sigma=4.393010 ! Fit after self-cal, rms=0.615941Jy sigma=4.392294 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.615941Jy sigma=4.392294 ! Fit after self-cal, rms=0.404781Jy sigma=3.389985 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.934 mas, bmaj=8.633 mas, bpa=-1.19 degrees ! Estimated noise=0.360773 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00572961 Jy ! Component: 100 - total flux cleaned = 0.0115117 Jy ! Component: 150 - total flux cleaned = 0.0151923 Jy ! Component: 200 - total flux cleaned = 0.0176656 Jy ! Total flux subtracted in 200 components = 0.0176656 Jy ! Clean residual min=-0.021079 max=0.024414 Jy/beam ! Clean residual mean=0.000150 rms=0.005576 Jy/beam ! Combined flux in latest and established models = 12.5573 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 450 components and 12.5573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.402941Jy sigma=3.368343 ! Fit after self-cal, rms=0.402991Jy sigma=3.367751 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, -30.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258683 Jy ! Component: 100 - total flux cleaned = 0.0396534 Jy ! Component: 150 - total flux cleaned = 0.0462723 Jy ! Component: 200 - total flux cleaned = 0.0510595 Jy ! Total flux subtracted in 200 components = 0.0510595 Jy ! Clean residual min=-0.021692 max=0.023260 Jy/beam ! Clean residual mean=0.000150 rms=0.005378 Jy/beam ! Combined flux in latest and established models = 12.6084 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 475 components and 12.6084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.399970Jy sigma=3.338855 ! Fit after self-cal, rms=0.399877Jy sigma=3.335251 ! Inverting map ! Added new window around map position (-56.5, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117608 Jy ! Component: 100 - total flux cleaned = 0.0165802 Jy ! Component: 150 - total flux cleaned = 0.0220659 Jy ! Component: 200 - total flux cleaned = 0.0268364 Jy ! Total flux subtracted in 200 components = 0.0268364 Jy ! Clean residual min=-0.021351 max=0.021936 Jy/beam ! Clean residual mean=0.000147 rms=0.005237 Jy/beam ! Combined flux in latest and established models = 12.6352 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 500 components and 12.6352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.398004Jy sigma=3.293695 ! Fit after self-cal, rms=0.397866Jy sigma=3.291565 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.397866Jy sigma=3.291565 ! Fit after self-cal, rms=0.396046Jy sigma=3.281075 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.54 mas, bmaj=10.39 mas, bpa=2.128 degrees ! Estimated noise=0.477541 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166759 Jy ! Component: 100 - total flux cleaned = 0.0292036 Jy ! Component: 150 - total flux cleaned = 0.0393021 Jy ! Component: 200 - total flux cleaned = 0.0449009 Jy ! Total flux subtracted in 200 components = 0.0449009 Jy ! Clean residual min=-0.022097 max=0.028073 Jy/beam ! Clean residual mean=0.000235 rms=0.005716 Jy/beam ! Combined flux in latest and established models = 12.6801 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 526 components and 12.6801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.394270Jy sigma=3.271549 ! Fit after self-cal, rms=0.394426Jy sigma=3.270792 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.5, -64.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288905 Jy ! Component: 100 - total flux cleaned = 0.0447408 Jy ! Component: 150 - total flux cleaned = 0.0545864 Jy ! Component: 200 - total flux cleaned = 0.0626388 Jy ! Total flux subtracted in 200 components = 0.0626388 Jy ! Clean residual min=-0.022486 max=0.019566 Jy/beam ! Clean residual mean=0.000269 rms=0.005288 Jy/beam ! Combined flux in latest and established models = 12.7428 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 573 components and 12.7428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.390786Jy sigma=3.238770 ! Fit after self-cal, rms=0.389857Jy sigma=3.234460 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=4.93 mas, bmaj=8.631 mas, bpa=-1.066 degrees ! Estimated noise=0.360818 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.93 x 8.631 at -1.066 degrees (North through East) ! Clean map min=-0.019633 max=4.2841 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.389857Jy sigma=3.234460 ! Fit after self-cal, rms=0.260121Jy sigma=2.480962 ! Inverting map and beam ! Estimated beam: bmin=4.925 mas, bmaj=8.626 mas, bpa=-1.074 degrees ! Estimated noise=0.360628 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147248 Jy ! Component: 100 - total flux cleaned = 0.0261981 Jy ! Component: 150 - total flux cleaned = 0.0349123 Jy ! Component: 200 - total flux cleaned = 0.0410602 Jy ! Total flux subtracted in 200 components = 0.0410602 Jy ! Clean residual min=-0.019303 max=0.022188 Jy/beam ! Clean residual mean=0.000119 rms=0.004808 Jy/beam ! Combined flux in latest and established models = 12.7838 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 609 components and 12.7838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.257333Jy sigma=2.443837 ! Fit after self-cal, rms=0.256623Jy sigma=2.442087 ! Inverting map ! Added new window around map position (28.5, -73). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154424 Jy ! Component: 100 - total flux cleaned = 0.0184866 Jy ! Component: 150 - total flux cleaned = 0.020291 Jy ! Component: 200 - total flux cleaned = 0.0228792 Jy ! Total flux subtracted in 200 components = 0.0228792 Jy ! Clean residual min=-0.018487 max=0.019332 Jy/beam ! Clean residual mean=0.000127 rms=0.004659 Jy/beam ! Combined flux in latest and established models = 12.8067 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 639 components and 12.8067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.254558Jy sigma=2.399462 ! Fit after self-cal, rms=0.253993Jy sigma=2.397607 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.253993Jy sigma=2.397607 ! Fit after self-cal, rms=0.252636Jy sigma=2.392381 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.833 mas, bmaj=7.098 mas, bpa=-1.806 degrees ! Estimated noise=0.456519 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.25529 Jy ! Component: 100 - total flux cleaned = 3.78423 Jy ! Component: 150 - total flux cleaned = 4.97202 Jy ! Component: 200 - total flux cleaned = 5.91067 Jy ! Total flux subtracted in 200 components = 5.91067 Jy ! Clean residual min=-0.209135 max=0.563293 Jy/beam ! Clean residual mean=-0.000542 rms=0.045846 Jy/beam ! Combined flux in latest and established models = 5.91068 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 5.91068 Jy ! Inverting map and beam ! Estimated beam: bmin=4.923 mas, bmaj=8.624 mas, bpa=-1.077 degrees ! Estimated noise=0.360679 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.68325 Jy ! Component: 100 - total flux cleaned = 2.81732 Jy ! Component: 150 - total flux cleaned = 3.64092 Jy ! Component: 200 - total flux cleaned = 4.25088 Jy ! Total flux subtracted in 200 components = 4.25088 Jy ! Clean residual min=-0.080507 max=0.350675 Jy/beam ! Clean residual mean=-0.001642 rms=0.039041 Jy/beam ! Combined flux in latest and established models = 10.1616 Jy ! Adding 114 model components to the UV plane model. ! The established model now contains 142 components and 10.1616 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.459978 Jy ! Component: 100 - total flux cleaned = 0.811967 Jy ! Component: 150 - total flux cleaned = 1.08601 Jy ! Component: 200 - total flux cleaned = 1.3038 Jy ! Total flux subtracted in 200 components = 1.3038 Jy ! Clean residual min=-0.039599 max=0.133191 Jy/beam ! Clean residual mean=-0.000660 rms=0.018193 Jy/beam ! Combined flux in latest and established models = 11.4654 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 211 components and 11.4654 Jy ! Inverting map ! Added new window around map position (-3.5, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.176387 Jy ! Component: 100 - total flux cleaned = 0.32045 Jy ! Component: 150 - total flux cleaned = 0.440273 Jy ! Component: 200 - total flux cleaned = 0.541136 Jy ! Total flux subtracted in 200 components = 0.541136 Jy ! Clean residual min=-0.027333 max=0.061905 Jy/beam ! Clean residual mean=-0.000282 rms=0.010946 Jy/beam ! Combined flux in latest and established models = 12.0065 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 265 components and 12.0065 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0855212 Jy ! Component: 100 - total flux cleaned = 0.15849 Jy ! Component: 150 - total flux cleaned = 0.221027 Jy ! Component: 200 - total flux cleaned = 0.275293 Jy ! Total flux subtracted in 200 components = 0.275293 Jy ! Clean residual min=-0.024579 max=0.034618 Jy/beam ! Clean residual mean=-0.000108 rms=0.007962 Jy/beam ! Combined flux in latest and established models = 12.2818 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 303 components and 12.2818 Jy ! Inverting map ! Added new window around map position (-25, 58.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0481777 Jy ! Component: 100 - total flux cleaned = 0.0913466 Jy ! Component: 150 - total flux cleaned = 0.130588 Jy ! Component: 200 - total flux cleaned = 0.16643 Jy ! Total flux subtracted in 200 components = 0.16643 Jy ! Clean residual min=-0.023752 max=0.025894 Jy/beam ! Clean residual mean=-0.000027 rms=0.006626 Jy/beam ! Combined flux in latest and established models = 12.4482 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 338 components and 12.4482 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.53 mas, bmaj=10.38 mas, bpa=2.143 degrees ! Estimated noise=0.478037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0488994 Jy ! Component: 100 - total flux cleaned = 0.0898978 Jy ! Component: 150 - total flux cleaned = 0.125606 Jy ! Component: 200 - total flux cleaned = 0.157132 Jy ! Total flux subtracted in 200 components = 0.157132 Jy ! Clean residual min=-0.023810 max=0.024907 Jy/beam ! Clean residual mean=0.000064 rms=0.006848 Jy/beam ! Combined flux in latest and established models = 12.6053 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0282652 Jy ! Component: 100 - total flux cleaned = 0.0537593 Jy ! Component: 150 - total flux cleaned = 0.0768393 Jy ! Component: 200 - total flux cleaned = 0.0978515 Jy ! Total flux subtracted in 200 components = 0.0978515 Jy ! Clean residual min=-0.023732 max=0.023041 Jy/beam ! Clean residual mean=0.000120 rms=0.005882 Jy/beam ! Combined flux in latest and established models = 12.7032 Jy ! Adding 157 model components to the UV plane model. ! The established model now contains 477 components and 12.7032 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.923 mas, bmaj=8.624 mas, bpa=-1.077 degrees ! Estimated noise=0.360679 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312519 Jy ! Component: 100 - total flux cleaned = 0.0103669 Jy ! Component: 150 - total flux cleaned = 0.0181595 Jy ! Component: 200 - total flux cleaned = 0.0266765 Jy ! Total flux subtracted in 200 components = 0.0266765 Jy ! Clean residual min=-0.022177 max=0.020597 Jy/beam ! Clean residual mean=0.000079 rms=0.004982 Jy/beam ! Combined flux in latest and established models = 12.7299 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 509 components and 12.7299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.255853Jy sigma=2.476220 ! Fit after self-cal, rms=0.256184Jy sigma=2.459847 wmodel J0319+4130_L_map.mod ! Writing 509 model components to file: J0319+4130_L_map.mod wobs J0319+4130_L_uvs.fits ! Writing UV FITS file: J0319+4130_L_uvs.fits wwins J0319+4130_L_map.win ! wwins: Wrote 11 windows to J0319+4130_L_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252394 Jy ! Component: 100 - total flux cleaned = 0.00811434 Jy ! Component: 150 - total flux cleaned = 0.0117496 Jy ! Component: 200 - total flux cleaned = 0.0146203 Jy ! Component: 250 - total flux cleaned = 0.0173958 Jy ! Component: 300 - total flux cleaned = 0.0197934 Jy ! Component: 350 - total flux cleaned = 0.0227166 Jy ! Component: 400 - total flux cleaned = 0.024715 Jy ! Component: 450 - total flux cleaned = 0.0275168 Jy ! Component: 500 - total flux cleaned = 0.0294478 Jy ! Component: 550 - total flux cleaned = 0.0316224 Jy ! Component: 600 - total flux cleaned = 0.0337645 Jy ! Component: 650 - total flux cleaned = 0.036135 Jy ! Component: 700 - total flux cleaned = 0.0382084 Jy ! Component: 750 - total flux cleaned = 0.0397452 Jy ! Component: 800 - total flux cleaned = 0.0412672 Jy ! Component: 850 - total flux cleaned = 0.0435188 Jy ! Component: 900 - total flux cleaned = 0.0445068 Jy ! Component: 950 - total flux cleaned = 0.0457324 Jy ! Component: 1000 - total flux cleaned = 0.0476676 Jy ! Component: 1050 - total flux cleaned = 0.0488617 Jy ! Component: 1100 - total flux cleaned = 0.050518 Jy ! Component: 1150 - total flux cleaned = 0.051691 Jy ! Component: 1200 - total flux cleaned = 0.0528558 Jy ! Component: 1250 - total flux cleaned = 0.054469 Jy ! Component: 1300 - total flux cleaned = 0.0558403 Jy ! Component: 1350 - total flux cleaned = 0.056068 Jy ! Component: 1400 - total flux cleaned = 0.0576442 Jy ! Component: 1450 - total flux cleaned = 0.0585358 Jy ! Component: 1500 - total flux cleaned = 0.0592025 Jy ! Component: 1550 - total flux cleaned = 0.0607441 Jy ! Component: 1600 - total flux cleaned = 0.0629254 Jy ! Component: 1650 - total flux cleaned = 0.062925 Jy ! Component: 1700 - total flux cleaned = 0.064431 Jy ! Component: 1750 - total flux cleaned = 0.0648576 Jy ! Component: 1800 - total flux cleaned = 0.0665531 Jy ! Component: 1850 - total flux cleaned = 0.0665541 Jy ! Component: 1900 - total flux cleaned = 0.0678116 Jy ! Component: 1950 - total flux cleaned = 0.0686427 Jy ! Component: 2000 - total flux cleaned = 0.0690581 Jy ! Component: 2050 - total flux cleaned = 0.0698794 Jy ! Component: 2100 - total flux cleaned = 0.0711055 Jy ! Component: 2150 - total flux cleaned = 0.0715125 Jy ! Component: 2200 - total flux cleaned = 0.0727258 Jy ! Component: 2250 - total flux cleaned = 0.073328 Jy ! Component: 2300 - total flux cleaned = 0.0743276 Jy ! Component: 2350 - total flux cleaned = 0.0753207 Jy ! Component: 2400 - total flux cleaned = 0.0757162 Jy ! Component: 2450 - total flux cleaned = 0.0765013 Jy ! Component: 2500 - total flux cleaned = 0.0778691 Jy ! Component: 2550 - total flux cleaned = 0.0778682 Jy ! Component: 2600 - total flux cleaned = 0.0788349 Jy ! Component: 2650 - total flux cleaned = 0.0792207 Jy ! Component: 2700 - total flux cleaned = 0.0799878 Jy ! Component: 2750 - total flux cleaned = 0.0803688 Jy ! Component: 2800 - total flux cleaned = 0.0809391 Jy ! Component: 2850 - total flux cleaned = 0.0815044 Jy ! Component: 2900 - total flux cleaned = 0.082069 Jy ! Component: 2950 - total flux cleaned = 0.0828173 Jy ! Component: 3000 - total flux cleaned = 0.0839327 Jy ! Component: 3050 - total flux cleaned = 0.0844891 Jy ! Component: 3100 - total flux cleaned = 0.0846727 Jy ! Component: 3150 - total flux cleaned = 0.0857748 Jy ! Component: 3200 - total flux cleaned = 0.0861402 Jy ! Component: 3250 - total flux cleaned = 0.0870501 Jy ! Component: 3300 - total flux cleaned = 0.0872312 Jy ! Component: 3350 - total flux cleaned = 0.0888544 Jy ! Component: 3400 - total flux cleaned = 0.089215 Jy ! Component: 3450 - total flux cleaned = 0.0897516 Jy ! Component: 3500 - total flux cleaned = 0.0913538 Jy ! Component: 3550 - total flux cleaned = 0.0915314 Jy ! Component: 3600 - total flux cleaned = 0.092591 Jy ! Component: 3650 - total flux cleaned = 0.0934693 Jy ! Component: 3700 - total flux cleaned = 0.0943434 Jy ! Component: 3750 - total flux cleaned = 0.0952136 Jy ! Component: 3800 - total flux cleaned = 0.0960802 Jy ! Component: 3850 - total flux cleaned = 0.0967721 Jy ! Component: 3900 - total flux cleaned = 0.0976316 Jy ! Component: 3950 - total flux cleaned = 0.0983165 Jy ! Component: 4000 - total flux cleaned = 0.098657 Jy ! Component: 4050 - total flux cleaned = 0.0996758 Jy ! Total flux subtracted in 4096 components = 0.100691 Jy ! Clean residual min=-0.008450 max=0.009091 Jy/beam ! Clean residual mean=0.000067 rms=0.003590 Jy/beam ! Combined flux in latest and established models = 12.8306 Jy keep ! Adding 325 model components to the UV plane model. ! The established model now contains 829 components and 12.8306 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap .//J0319+4130_L_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.923 x 8.624 at -1.077 degrees (North through East) ! Clean map min=-0.018338 max=4.3164 Jy/beam ! Writing clean map to FITS file: .//J0319+4130_L_map.fits wmodel .//J0319+4130_L_map.mod ! Writing 829 model components to file: .//J0319+4130_L_map.mod wobs .//J0319+4130_L_uvs.fits ! Writing UV FITS file: .//J0319+4130_L_uvs.fits wwins .//J0319+4130_L_map.win ! wwins: Wrote 12 windows to .//J0319+4130_L_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 4.31636 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00358947 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.249479 0.249479 0.498958 0.997915 1.99583 3.99166 7.98332 15.9666 31.9333 63.8666 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0107 print "peak= ", int(1000*peak_flux)/1000 ! peak= 4.316 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1202.51 quit ! Quitting program ! Log file .//J0319+4130_L_dfm.log closed on Wed Aug 15 15:26:49 2018