! Started logfile: /scr/pima/bp232_uvs/J0137+3309_S_dfm.log on Thu Aug  2 22:27:23 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bp232_uvs/J0137+3309_S_uva.fits
! Reading UV FITS file: /scr/pima/bp232_uvs/J0137+3309_S_uva.fits
! AN table 1: 446 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.991629 visibilities/baseline/integration-bin.
! Found source: J0137+3309
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 79608 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0137+3309_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 30 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4460 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.130800Jy  sigma=18.922777
! Fit after  self-cal, rms=0.848534Jy  sigma=14.121757
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.61 mas, bmaj=5.287 mas, bpa=-4.856 degrees
! Estimated noise=0.343729 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.142357 Jy
! Component: 100  -  total flux cleaned = 0.215416 Jy
! Total flux subtracted in 100 components = 0.215416 Jy
! Clean residual min=-0.030593 max=0.052931 Jy/beam
! Clean residual mean=0.000105 rms=0.008261 Jy/beam
! Combined flux in latest and established models = 0.215416 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 44 components and 0.215416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.456154Jy  sigma=7.615805
! Fit after  self-cal, rms=0.455189Jy  sigma=7.602350
! Inverting map 
! Added new window around map position (-4, -1.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0612895 Jy
! Component: 100  -  total flux cleaned = 0.108475 Jy
! Total flux subtracted in 100 components = 0.108475 Jy
! Clean residual min=-0.029283 max=0.056292 Jy/beam
! Clean residual mean=0.000104 rms=0.007907 Jy/beam
! Combined flux in latest and established models = 0.323891 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 73 components and 0.323891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.428733Jy  sigma=7.130347
! Fit after  self-cal, rms=0.427948Jy  sigma=7.112216
! Inverting map 
! Added new window around map position (-4, -62).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0558277 Jy
! Component: 100  -  total flux cleaned = 0.0950495 Jy
! Total flux subtracted in 100 components = 0.0950495 Jy
! Clean residual min=-0.027283 max=0.043632 Jy/beam
! Clean residual mean=0.000104 rms=0.007576 Jy/beam
! Combined flux in latest and established models = 0.41894 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 97 components and 0.41894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.412067Jy  sigma=6.835645
! Fit after  self-cal, rms=0.409678Jy  sigma=6.791996
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0520641 Jy
! Component: 100  -  total flux cleaned = 0.0873086 Jy
! Total flux subtracted in 100 components = 0.0873086 Jy
! Clean residual min=-0.026761 max=0.041124 Jy/beam
! Clean residual mean=0.000107 rms=0.007323 Jy/beam
! Combined flux in latest and established models = 0.506249 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 106 components and 0.506249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.396309Jy  sigma=6.561972
! Fit after  self-cal, rms=0.394610Jy  sigma=6.529952
! Inverting map 
! Added new window around map position (-1.5, -117.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0480333 Jy
! Component: 100  -  total flux cleaned = 0.0809921 Jy
! Total flux subtracted in 100 components = 0.0809921 Jy
! Clean residual min=-0.026394 max=0.040635 Jy/beam
! Clean residual mean=0.000112 rms=0.006993 Jy/beam
! Combined flux in latest and established models = 0.587241 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 115 components and 0.587241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.385330Jy  sigma=6.375475
! Fit after  self-cal, rms=0.384819Jy  sigma=6.364301
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.449 mas, bmaj=6.653 mas, bpa=-3.508 degrees
! Estimated noise=0.178714 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.108167 Jy
! Component: 100  -  total flux cleaned = 0.189594 Jy
! Component: 150  -  total flux cleaned = 0.25509 Jy
! Component: 200  -  total flux cleaned = 0.308569 Jy
! Total flux subtracted in 200 components = 0.308569 Jy
! Clean residual min=-0.042958 max=0.054924 Jy/beam
! Clean residual mean=0.000145 rms=0.013213 Jy/beam
! Combined flux in latest and established models = 0.89581 Jy
! Performing phase self-cal
! Adding 104 model components to the UV plane model.
! The established model now contains 205 components and 0.89581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.338960Jy  sigma=5.575839
! Fit after  self-cal, rms=0.336411Jy  sigma=5.526689
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.449 x 6.653 at -3.508 degrees (North through East)
! Clean map  min=-0.047506  max=0.2066 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        1.19     HN        0.97     KP        0.81     
!   LA        0.74     MK        1.07     NL        1.45     OV        1.32     
!   PT        0.71     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.07     HN        0.83     KP        0.80     
!   LA        0.77     MK        1.09     NL        1.46     OV        1.36     
!   PT        0.73     SC        0.88     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.00     HN        0.80     KP        0.85     
!   LA        0.74     MK        1.13     NL        1.44     OV        1.37     
!   PT        0.77     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Fit before self-cal, rms=0.336411Jy  sigma=5.526689
! Fit after  self-cal, rms=0.310466Jy  sigma=5.033283
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.503 mas, bmaj=6.762 mas, bpa=-3.004 degrees
! Estimated noise=0.169407 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0346495 Jy
! Component: 100  -  total flux cleaned = 0.0546583 Jy
! Component: 150  -  total flux cleaned = 0.0659705 Jy
! Component: 200  -  total flux cleaned = 0.0752409 Jy
! Total flux subtracted in 200 components = 0.0752409 Jy
! Clean residual min=-0.034174 max=0.037253 Jy/beam
! Clean residual mean=0.000074 rms=0.010327 Jy/beam
! Combined flux in latest and established models = 0.971051 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 229 components and 0.971051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.304054Jy  sigma=4.975344
! Fit after  self-cal, rms=0.306527Jy  sigma=4.926373
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.306527Jy  sigma=4.926373
! Fit after  self-cal, rms=0.338418Jy  sigma=4.556837
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.634 mas, bmaj=6.899 mas, bpa=-1.85 degrees
! Estimated noise=0.182132 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0274823 Jy
! Component: 100  -  total flux cleaned = 0.0435029 Jy
! Component: 150  -  total flux cleaned = 0.0559214 Jy
! Component: 200  -  total flux cleaned = 0.065711 Jy
! Total flux subtracted in 200 components = 0.065711 Jy
! Clean residual min=-0.030815 max=0.035684 Jy/beam
! Clean residual mean=0.000001 rms=0.009524 Jy/beam
! Combined flux in latest and established models = 1.03676 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 251 components and 1.03676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.334422Jy  sigma=4.520195
! Fit after  self-cal, rms=0.334923Jy  sigma=4.508140
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00943991 Jy
! Component: 100  -  total flux cleaned = 0.0137538 Jy
! Component: 150  -  total flux cleaned = 0.0168096 Jy
! Component: 200  -  total flux cleaned = 0.0204287 Jy
! Total flux subtracted in 200 components = 0.0204287 Jy
! Clean residual min=-0.030405 max=0.036084 Jy/beam
! Clean residual mean=0.000001 rms=0.009541 Jy/beam
! Combined flux in latest and established models = 1.05719 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 264 components and 1.05719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.333896Jy  sigma=4.497723
! Fit after  self-cal, rms=0.333875Jy  sigma=4.495451
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.333875Jy  sigma=4.495451
! Fit after  self-cal, rms=0.446722Jy  sigma=4.175102
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.763 mas, bmaj=6.954 mas, bpa=-2.758 degrees
! Estimated noise=0.192611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120157 Jy
! Component: 100  -  total flux cleaned = 0.0149997 Jy
! Component: 150  -  total flux cleaned = 0.0165521 Jy
! Component: 200  -  total flux cleaned = 0.0179046 Jy
! Total flux subtracted in 200 components = 0.0179046 Jy
! Clean residual min=-0.030551 max=0.034657 Jy/beam
! Clean residual mean=0.000045 rms=0.009457 Jy/beam
! Combined flux in latest and established models = 1.07509 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 273 components and 1.07509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.445188Jy  sigma=4.173708
! Fit after  self-cal, rms=0.445856Jy  sigma=4.167385
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000332453 Jy
! Component: 100  -  total flux cleaned = 0.00135521 Jy
! Component: 150  -  total flux cleaned = 0.00251487 Jy
! Component: 200  -  total flux cleaned = 0.00335567 Jy
! Total flux subtracted in 200 components = 0.00335567 Jy
! Clean residual min=-0.030711 max=0.035110 Jy/beam
! Clean residual mean=0.000047 rms=0.009530 Jy/beam
! Combined flux in latest and established models = 1.07845 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 281 components and 1.07845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.445313Jy  sigma=4.165616
! Fit after  self-cal, rms=0.445269Jy  sigma=4.165070
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.445269Jy  sigma=4.165070
! Fit after  self-cal, rms=0.484761Jy  sigma=4.156455
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.169 mas, bmaj=10.7 mas, bpa=-5.388 degrees
! Estimated noise=0.21943 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0131243 Jy
! Component: 100  -  total flux cleaned = 0.0171226 Jy
! Component: 150  -  total flux cleaned = 0.0185321 Jy
! Component: 200  -  total flux cleaned = 0.0187748 Jy
! Total flux subtracted in 200 components = 0.0187748 Jy
! Clean residual min=-0.055111 max=0.063443 Jy/beam
! Clean residual mean=0.000087 rms=0.016515 Jy/beam
! Combined flux in latest and established models = 1.09722 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 288 components and 1.09722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.484488Jy  sigma=4.161543
! Fit after  self-cal, rms=0.484439Jy  sigma=4.159397
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00358119 Jy
! Component: 100  -  total flux cleaned = 0.0048311 Jy
! Component: 150  -  total flux cleaned = 0.00441471 Jy
! Component: 200  -  total flux cleaned = 0.00403874 Jy
! Total flux subtracted in 200 components = 0.00403874 Jy
! Clean residual min=-0.054923 max=0.063236 Jy/beam
! Clean residual mean=0.000090 rms=0.016497 Jy/beam
! Combined flux in latest and established models = 1.10126 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 294 components and 1.10126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.484513Jy  sigma=4.163605
! Fit after  self-cal, rms=0.484432Jy  sigma=4.162784
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.821 mas, bmaj=7.022 mas, bpa=-2.586 degrees
! Estimated noise=0.199893 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.821 x 7.022 at -2.586 degrees (North through East)
! Clean map  min=-0.03213  max=0.19379 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.827 mas, bmaj=5.404 mas, bpa=-3.304 degrees
! Estimated noise=0.424272 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.171965 Jy
! Component: 100  -  total flux cleaned = 0.284259 Jy
! Component: 150  -  total flux cleaned = 0.371684 Jy
! Component: 200  -  total flux cleaned = 0.444659 Jy
! Total flux subtracted in 200 components = 0.444659 Jy
! Clean residual min=-0.031877 max=0.045022 Jy/beam
! Clean residual mean=0.000153 rms=0.008949 Jy/beam
! Combined flux in latest and established models = 0.444659 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 78 model components to the UV plane model.
! The established model now contains 78 components and 0.444659 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.821 mas, bmaj=7.022 mas, bpa=-2.586 degrees
! Estimated noise=0.199893 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.143644 Jy
! Component: 100  -  total flux cleaned = 0.238852 Jy
! Component: 150  -  total flux cleaned = 0.307952 Jy
! Component: 200  -  total flux cleaned = 0.363728 Jy
! Total flux subtracted in 200 components = 0.363728 Jy
! Clean residual min=-0.035869 max=0.038137 Jy/beam
! Clean residual mean=0.000107 rms=0.011293 Jy/beam
! Combined flux in latest and established models = 0.808387 Jy
! Adding 114 model components to the UV plane model.
! The established model now contains 177 components and 0.808387 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.169 mas, bmaj=10.7 mas, bpa=-5.388 degrees
! Estimated noise=0.21943 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0709461 Jy
! Component: 100  -  total flux cleaned = 0.118242 Jy
! Component: 150  -  total flux cleaned = 0.154322 Jy
! Component: 200  -  total flux cleaned = 0.182665 Jy
! Total flux subtracted in 200 components = 0.182665 Jy
! Clean residual min=-0.054793 max=0.064483 Jy/beam
! Clean residual mean=0.000125 rms=0.016610 Jy/beam
! Combined flux in latest and established models = 0.991051 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0225295 Jy
! Component: 100  -  total flux cleaned = 0.0405868 Jy
! Component: 150  -  total flux cleaned = 0.0551192 Jy
! Component: 200  -  total flux cleaned = 0.0668503 Jy
! Total flux subtracted in 200 components = 0.0668503 Jy
! Clean residual min=-0.055097 max=0.063257 Jy/beam
! Clean residual mean=0.000112 rms=0.016441 Jy/beam
! Combined flux in latest and established models = 1.0579 Jy
! Adding 103 model components to the UV plane model.
! The established model now contains 256 components and 1.0579 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.821 mas, bmaj=7.022 mas, bpa=-2.586 degrees
! Estimated noise=0.199893 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114141 Jy
! Component: 100  -  total flux cleaned = 0.0160693 Jy
! Component: 150  -  total flux cleaned = 0.0203582 Jy
! Component: 200  -  total flux cleaned = 0.0213394 Jy
! Total flux subtracted in 200 components = 0.0213394 Jy
! Clean residual min=-0.033245 max=0.035392 Jy/beam
! Clean residual mean=0.000051 rms=0.009875 Jy/beam
! Combined flux in latest and established models = 1.07924 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 267 components and 1.07924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.483365Jy  sigma=4.181832
! Fit after  self-cal, rms=0.482819Jy  sigma=4.176030
wmodel J0137+3309_S_map.mod
! Writing 267 model components to file: J0137+3309_S_map.mod
wobs   J0137+3309_S_uvs.fits
! Writing UV FITS file: J0137+3309_S_uvs.fits
wwins  J0137+3309_S_map.win
! wwins: Wrote 5 windows to J0137+3309_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118522 Jy
! Component: 100  -  total flux cleaned = 0.0185233 Jy
! Component: 150  -  total flux cleaned = 0.0237581 Jy
! Component: 200  -  total flux cleaned = 0.0293726 Jy
! Component: 250  -  total flux cleaned = 0.0342665 Jy
! Component: 300  -  total flux cleaned = 0.0374302 Jy
! Component: 350  -  total flux cleaned = 0.0415347 Jy
! Component: 400  -  total flux cleaned = 0.0430404 Jy
! Component: 450  -  total flux cleaned = 0.0464851 Jy
! Component: 500  -  total flux cleaned = 0.0493812 Jy
! Component: 550  -  total flux cleaned = 0.0531799 Jy
! Component: 600  -  total flux cleaned = 0.0569182 Jy
! Component: 650  -  total flux cleaned = 0.0601477 Jy
! Component: 700  -  total flux cleaned = 0.0637884 Jy
! Component: 750  -  total flux cleaned = 0.0669349 Jy
! Component: 800  -  total flux cleaned = 0.0691556 Jy
! Component: 850  -  total flux cleaned = 0.0700372 Jy
! Component: 900  -  total flux cleaned = 0.0735201 Jy
! Component: 950  -  total flux cleaned = 0.0756758 Jy
! Component: 1000  -  total flux cleaned = 0.0782327 Jy
! Component: 1050  -  total flux cleaned = 0.080347 Jy
! Component: 1100  -  total flux cleaned = 0.082438 Jy
! Component: 1150  -  total flux cleaned = 0.0857514 Jy
! Component: 1200  -  total flux cleaned = 0.0861614 Jy
! Component: 1250  -  total flux cleaned = 0.0881943 Jy
! Component: 1300  -  total flux cleaned = 0.0902107 Jy
! Component: 1350  -  total flux cleaned = 0.0918112 Jy
! Component: 1400  -  total flux cleaned = 0.0922047 Jy
! Component: 1450  -  total flux cleaned = 0.0937804 Jy
! Component: 1500  -  total flux cleaned = 0.0953423 Jy
! Component: 1550  -  total flux cleaned = 0.0961235 Jy
! Component: 1600  -  total flux cleaned = 0.0995868 Jy
! Component: 1650  -  total flux cleaned = 0.100731 Jy
! Component: 1700  -  total flux cleaned = 0.101492 Jy
! Component: 1750  -  total flux cleaned = 0.103756 Jy
! Component: 1800  -  total flux cleaned = 0.105625 Jy
! Component: 1850  -  total flux cleaned = 0.107481 Jy
! Component: 1900  -  total flux cleaned = 0.109326 Jy
! Component: 1950  -  total flux cleaned = 0.110422 Jy
! Component: 2000  -  total flux cleaned = 0.111512 Jy
! Component: 2050  -  total flux cleaned = 0.113683 Jy
! Component: 2100  -  total flux cleaned = 0.115119 Jy
! Component: 2150  -  total flux cleaned = 0.117258 Jy
! Component: 2200  -  total flux cleaned = 0.117613 Jy
! Component: 2250  -  total flux cleaned = 0.120083 Jy
! Component: 2300  -  total flux cleaned = 0.121481 Jy
! Component: 2350  -  total flux cleaned = 0.121827 Jy
! Component: 2400  -  total flux cleaned = 0.122521 Jy
! Component: 2450  -  total flux cleaned = 0.124245 Jy
! Component: 2500  -  total flux cleaned = 0.124249 Jy
! Component: 2550  -  total flux cleaned = 0.127314 Jy
! Component: 2600  -  total flux cleaned = 0.127654 Jy
! Component: 2650  -  total flux cleaned = 0.129001 Jy
! Component: 2700  -  total flux cleaned = 0.13101 Jy
! Component: 2750  -  total flux cleaned = 0.13201 Jy
! Component: 2800  -  total flux cleaned = 0.132009 Jy
! Component: 2850  -  total flux cleaned = 0.133328 Jy
! Component: 2900  -  total flux cleaned = 0.134643 Jy
! Component: 2950  -  total flux cleaned = 0.135297 Jy
! Component: 3000  -  total flux cleaned = 0.133672 Jy
! Component: 3050  -  total flux cleaned = 0.135615 Jy
! Component: 3100  -  total flux cleaned = 0.136257 Jy
! Component: 3150  -  total flux cleaned = 0.135617 Jy
! Component: 3200  -  total flux cleaned = 0.137212 Jy
! Component: 3250  -  total flux cleaned = 0.137529 Jy
! Component: 3300  -  total flux cleaned = 0.137849 Jy
! Component: 3350  -  total flux cleaned = 0.139418 Jy
! Component: 3400  -  total flux cleaned = 0.139732 Jy
! Component: 3450  -  total flux cleaned = 0.140042 Jy
! Component: 3500  -  total flux cleaned = 0.140044 Jy
! Component: 3550  -  total flux cleaned = 0.140043 Jy
! Component: 3600  -  total flux cleaned = 0.141583 Jy
! Component: 3650  -  total flux cleaned = 0.142499 Jy
! Component: 3700  -  total flux cleaned = 0.142802 Jy
! Component: 3750  -  total flux cleaned = 0.143409 Jy
! Component: 3800  -  total flux cleaned = 0.14522 Jy
! Component: 3850  -  total flux cleaned = 0.144919 Jy
! Component: 3900  -  total flux cleaned = 0.144917 Jy
! Component: 3950  -  total flux cleaned = 0.145809 Jy
! Component: 4000  -  total flux cleaned = 0.14729 Jy
! Component: 4050  -  total flux cleaned = 0.147586 Jy
! Total flux subtracted in 4096 components = 0.148173 Jy
! Clean residual min=-0.015747 max=0.017612 Jy/beam
! Clean residual mean=0.000040 rms=0.006728 Jy/beam
! Combined flux in latest and established models = 1.22741 Jy
keep
! Adding 660 model components to the UV plane model.
! The established model now contains 927 components and 1.22742 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/bp232_uvs/J0137+3309_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.821 x 7.022 at -2.586 degrees (North through East)
! Clean map  min=-0.027064  max=0.19744 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp232_uvs/J0137+3309_S_map.fits
wmodel /scr/pima/bp232_uvs/J0137+3309_S_map.mod
! Writing 927 model components to file: /scr/pima/bp232_uvs/J0137+3309_S_map.mod
wobs   /scr/pima/bp232_uvs/J0137+3309_S_uvs.fits
! Writing UV FITS file: /scr/pima/bp232_uvs/J0137+3309_S_uvs.fits
wwins  /scr/pima/bp232_uvs/J0137+3309_S_map.win
! wwins: Wrote 6 windows to /scr/pima/bp232_uvs/J0137+3309_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.19744 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00671685 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -10.2059 10.2059 20.4118 40.8235 81.6471
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0201 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.197 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  29.394 
quit
! Quitting program
! Log file /scr/pima/bp232_uvs/J0137+3309_S_dfm.log closed on Thu Aug  2 22:27:33 2018