! Started logfile: /vlbi/bp222/temp_maps//J2359-3133_X_dfm.log on Thu Feb 14 23:08:40 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J2359-3133_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J2359-3133_X_uvm.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! AN table 2: 17 integrations on 36 of 36 possible baselines. ! AN table 3: 32 integrations on 15 of 15 possible baselines. ! AN table 4: 16 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.930168 visibilities/baseline/integration-bin. ! Found source: J2359-3133 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 23976 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2359-3133_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 26 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.056849Jy sigma=13.754035 ! Fit after self-cal, rms=0.688571Jy sigma=8.793734 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6731 mas, bmaj=1.613 mas, bpa=-1.225 degrees ! Estimated noise=0.741585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.228326 Jy ! Component: 100 - total flux cleaned = 0.304098 Jy ! Total flux subtracted in 100 components = 0.304098 Jy ! Clean residual min=-0.018290 max=0.036298 Jy/beam ! Clean residual mean=-0.000017 rms=0.004906 Jy/beam ! Combined flux in latest and established models = 0.304098 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.304098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.140169Jy sigma=1.973172 ! Fit after self-cal, rms=0.139940Jy sigma=1.966912 ! Inverting map ! Added new window around map position (0.8, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0417877 Jy ! Component: 100 - total flux cleaned = 0.0683678 Jy ! Total flux subtracted in 100 components = 0.0683678 Jy ! Clean residual min=-0.016863 max=0.024015 Jy/beam ! Clean residual mean=-0.000011 rms=0.003857 Jy/beam ! Combined flux in latest and established models = 0.372466 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 29 components and 0.372466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.120991Jy sigma=1.704179 ! Fit after self-cal, rms=0.120994Jy sigma=1.702838 ! Inverting map ! Added new window around map position (-8.2, 21.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022397 Jy ! Component: 100 - total flux cleaned = 0.0369242 Jy ! Total flux subtracted in 100 components = 0.0369242 Jy ! Clean residual min=-0.015818 max=0.018434 Jy/beam ! Clean residual mean=-0.000008 rms=0.003427 Jy/beam ! Combined flux in latest and established models = 0.40939 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 39 components and 0.40939 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.116843Jy sigma=1.640077 ! Fit after self-cal, rms=0.116581Jy sigma=1.635691 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9268 mas, bmaj=2.144 mas, bpa=-1.747 degrees ! Estimated noise=0.383169 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0140695 Jy ! Component: 100 - total flux cleaned = 0.0188425 Jy ! Component: 150 - total flux cleaned = 0.0203683 Jy ! Component: 200 - total flux cleaned = 0.0214545 Jy ! Total flux subtracted in 200 components = 0.0214545 Jy ! Clean residual min=-0.019711 max=0.021612 Jy/beam ! Clean residual mean=-0.000012 rms=0.004982 Jy/beam ! Combined flux in latest and established models = 0.430844 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 48 components and 0.430844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.115016Jy sigma=1.612318 ! Fit after self-cal, rms=0.114955Jy sigma=1.611901 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9268 x 2.144 at -1.747 degrees (North through East) ! Clean map min=-0.018973 max=0.28191 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.97 HN 1.40 KP 0.94 ! LA 0.94 MK 0.89 NL 1.06 OV 0.94 ! PT 0.99 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.96 KP 2.08 LA 0.96 ! MK 0.98 NL 1.28 OV 0.86 PT 0.94 ! SC 1.06 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.87 HN 1.19 LA 0.90 NL 1.19 ! OV 0.93 PT 0.95 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 0.88 LA 1.09 MK 1.30 ! NL 1.05 OV 0.92 PT 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.95 HN 1.25 KP 0.94 ! LA 0.91 MK 0.93 NL 1.07 OV 0.92 ! PT 1.00 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.93 KP 2.09 LA 0.95 ! MK 1.00 NL 1.26 OV 0.87 PT 0.96 ! SC 1.08 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.87 HN 1.16 LA 0.90 NL 1.27 ! OV 0.90 PT 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 0.90 LA 1.09 MK 1.28 ! NL 1.03 OV 0.89 PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.95 HN 1.37 KP 0.95 ! LA 0.94 MK 0.94 NL 1.09 OV 0.93 ! PT 1.00 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.95 KP 2.08 LA 0.95 ! MK 0.96 NL 1.25 OV 0.87 PT 0.95 ! SC 1.07 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.88 HN 1.16 LA 0.90 NL 1.22 ! OV 0.94 PT 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.88 LA 1.06 MK 1.28 ! NL 1.06 OV 0.92 PT 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.95 HN 1.27 KP 0.94 ! LA 0.96 MK 0.94 NL 1.08 OV 0.93 ! PT 1.00 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.94 KP 2.14 LA 0.97 ! MK 0.97 NL 1.27 OV 0.86 PT 0.94 ! SC 1.09 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.88 HN 1.16 LA 0.92 NL 1.22 ! OV 0.94 PT 0.94 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.91 LA 1.08 MK 1.36 ! NL 1.03 OV 0.90 PT 0.93 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.96 HN 1.29 KP 0.96 ! LA 0.93 MK 0.91 NL 1.08 OV 0.93 ! PT 0.99 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.96 KP 2.14 LA 0.96 ! MK 0.98 NL 1.24 OV 0.89 PT 0.96 ! SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.88 HN 1.16 LA 0.92 NL 1.22 ! OV 0.95 PT 0.96 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.89 LA 1.11 MK 1.26 ! NL 1.06 OV 0.90 PT 0.97 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 1.37 KP 0.96 ! LA 0.92 MK 0.90 NL 1.08 OV 0.92 ! PT 1.00 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.17 FD 0.94 KP 2.07 LA 0.96 ! MK 1.00 NL 1.26 OV 0.88 PT 0.95 ! SC 1.06 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.91 HN 1.25 LA 0.90 NL 1.21 ! OV 0.93 PT 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 0.92 LA 1.05 MK 1.22 ! NL 1.06 OV 0.88 PT 0.95 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.95 HN 1.30 KP 0.96 ! LA 0.93 MK 0.95 NL 1.09 OV 0.92 ! PT 0.98 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.94 KP 2.20 LA 0.97 ! MK 1.00 NL 1.28 OV 0.86 PT 0.97 ! SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.88 HN 1.16 LA 0.91 NL 1.24 ! OV 0.95 PT 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 0.90 LA 1.10 MK 1.27 ! NL 1.01 OV 0.89 PT 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 1.30 KP 0.94 ! LA 0.95 MK 0.93 NL 1.06 OV 0.91 ! PT 1.01 SC 1.07 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.95 KP 2.17 LA 0.98 ! MK 1.00 NL 1.29 OV 0.87 PT 0.95 ! SC 0.95 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.92 HN 1.19 LA 0.94 NL 1.18 ! OV 0.93 PT 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 FD 0.91 LA 1.08 MK 1.20 ! NL 1.05 OV 0.90 PT 0.94 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.94 HN 1.29 KP 0.95 ! LA 0.93 MK 0.91 NL 1.07 OV 0.92 ! PT 1.02 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.96 KP 2.13 LA 0.97 ! MK 1.00 NL 1.26 OV 0.89 PT 0.98 ! SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.88 HN 1.15 LA 0.91 NL 1.21 ! OV 0.94 PT 0.97 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 0.89 LA 1.12 MK 1.16 ! NL 1.02 OV 0.91 PT 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.97 HN 1.31 KP 0.94 ! LA 0.93 MK 0.94 NL 1.07 OV 0.92 ! PT 1.03 SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 0.93 KP 2.20 LA 0.99 ! MK 1.04 NL 1.24 OV 0.88 PT 0.96 ! SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.90 HN 1.23 LA 0.93 NL 1.21 ! OV 0.95 PT 0.92 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 0.93 LA 1.09 MK 1.19 ! NL 1.05 OV 0.90 PT 0.97 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.92 HN 1.18 KP 0.97 ! LA 0.93 MK 0.91 NL 1.11 OV 0.91 ! PT 1.04 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 0.94 KP 2.17 LA 0.97 ! MK 1.00 NL 1.28 OV 0.88 PT 0.96 ! SC 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.86 HN 1.23 LA 0.92 NL 1.21 ! OV 0.96 PT 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 0.91 LA 1.11 MK 1.26 ! NL 1.02 OV 0.87 PT 0.96 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.94 HN 1.24 KP 0.95 ! LA 0.92 MK 0.91 NL 1.10 OV 0.93 ! PT 0.99 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.96 KP 2.21 LA 0.95 ! MK 1.02 NL 1.24 OV 0.87 PT 0.97 ! SC 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! FD 0.86 HN 1.15 LA 0.90 NL 1.20 ! OV 0.96 PT 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.91 LA 1.11 MK 1.08 ! NL 1.09 OV 0.94 PT 0.93 ! ! ! Fit before self-cal, rms=0.114955Jy sigma=1.611901 ! Fit after self-cal, rms=0.132667Jy sigma=1.228406 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.935 mas, bmaj=2.183 mas, bpa=-1.326 degrees ! Estimated noise=0.389266 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00547585 Jy ! Component: 100 - total flux cleaned = -0.00669429 Jy ! Component: 150 - total flux cleaned = -0.00730824 Jy ! Component: 200 - total flux cleaned = -0.00783281 Jy ! Total flux subtracted in 200 components = -0.00783281 Jy ! Clean residual min=-0.004820 max=0.004761 Jy/beam ! Clean residual mean=0.000004 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.423012 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 58 components and 0.423012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132220Jy sigma=1.223478 ! Fit after self-cal, rms=0.132504Jy sigma=1.221926 ! Inverting map ! Added new window around map position (-1, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222221 Jy ! Component: 100 - total flux cleaned = 0.00130796 Jy ! Component: 150 - total flux cleaned = 0.000748923 Jy ! Component: 200 - total flux cleaned = 0.000417688 Jy ! Total flux subtracted in 200 components = 0.000417688 Jy ! Clean residual min=-0.004115 max=0.003625 Jy/beam ! Clean residual mean=0.000004 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.423429 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 72 components and 0.423429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132220Jy sigma=1.218570 ! Fit after self-cal, rms=0.132123Jy sigma=1.217909 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132123Jy sigma=1.217909 ! Fit after self-cal, rms=0.133139Jy sigma=1.216608 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9329 mas, bmaj=2.181 mas, bpa=-1.329 degrees ! Estimated noise=0.389167 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00102866 Jy ! Component: 100 - total flux cleaned = -0.00195451 Jy ! Component: 150 - total flux cleaned = -0.00242878 Jy ! Component: 200 - total flux cleaned = -0.00270916 Jy ! Total flux subtracted in 200 components = -0.00270916 Jy ! Clean residual min=-0.003545 max=0.003156 Jy/beam ! Clean residual mean=0.000003 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.42072 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.42072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132945Jy sigma=1.214499 ! Fit after self-cal, rms=0.132886Jy sigma=1.214041 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.6, 21.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115591 Jy ! Component: 100 - total flux cleaned = 0.000586239 Jy ! Component: 150 - total flux cleaned = 2.395e-05 Jy ! Component: 200 - total flux cleaned = -0.000258103 Jy ! Total flux subtracted in 200 components = -0.000258103 Jy ! Clean residual min=-0.003038 max=0.002632 Jy/beam ! Clean residual mean=0.000003 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.420462 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 85 components and 0.420462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132722Jy sigma=1.212425 ! Fit after self-cal, rms=0.132689Jy sigma=1.212253 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132689Jy sigma=1.212253 ! Fit after self-cal, rms=0.132916Jy sigma=1.210671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9321 mas, bmaj=2.184 mas, bpa=-1.412 degrees ! Estimated noise=0.388513 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000931746 Jy ! Component: 100 - total flux cleaned = -0.00134877 Jy ! Component: 150 - total flux cleaned = -0.00171774 Jy ! Component: 200 - total flux cleaned = -0.00194423 Jy ! Total flux subtracted in 200 components = -0.00194423 Jy ! Clean residual min=-0.002860 max=0.002460 Jy/beam ! Clean residual mean=0.000002 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.418518 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 95 components and 0.418518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132816Jy sigma=1.209699 ! Fit after self-cal, rms=0.132804Jy sigma=1.209555 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000274607 Jy ! Component: 100 - total flux cleaned = -0.000543551 Jy ! Component: 150 - total flux cleaned = -0.000689981 Jy ! Component: 200 - total flux cleaned = -0.000827627 Jy ! Total flux subtracted in 200 components = -0.000827627 Jy ! Clean residual min=-0.002457 max=0.002449 Jy/beam ! Clean residual mean=0.000001 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.41769 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 102 components and 0.41769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132746Jy sigma=1.209046 ! Fit after self-cal, rms=0.132729Jy sigma=1.208961 ! Inverting map ! Added new window around map position (-12.6, 24.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107512 Jy ! Component: 100 - total flux cleaned = 0.00121588 Jy ! Component: 150 - total flux cleaned = 0.00115659 Jy ! Component: 200 - total flux cleaned = 0.00100624 Jy ! Total flux subtracted in 200 components = 0.00100624 Jy ! Clean residual min=-0.002129 max=0.001968 Jy/beam ! Clean residual mean=0.000002 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.418696 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 109 components and 0.418696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132641Jy sigma=1.208148 ! Fit after self-cal, rms=0.132633Jy sigma=1.208085 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132633Jy sigma=1.208085 ! Fit after self-cal, rms=0.132831Jy sigma=1.207913 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.552 mas, bmaj=6.585 mas, bpa=-0.3536 degrees ! Estimated noise=0.445821 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143074 Jy ! Component: 100 - total flux cleaned = -0.00164903 Jy ! Component: 150 - total flux cleaned = -0.00174081 Jy ! Component: 200 - total flux cleaned = -0.00182348 Jy ! Total flux subtracted in 200 components = -0.00182348 Jy ! Clean residual min=-0.001929 max=0.001774 Jy/beam ! Clean residual mean=0.000002 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.416873 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 117 components and 0.416873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132800Jy sigma=1.207683 ! Fit after self-cal, rms=0.132794Jy sigma=1.207608 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000253622 Jy ! Component: 100 - total flux cleaned = -0.000222771 Jy ! Component: 150 - total flux cleaned = -0.000299203 Jy ! Component: 200 - total flux cleaned = -0.000347048 Jy ! Total flux subtracted in 200 components = -0.000347048 Jy ! Clean residual min=-0.001866 max=0.001746 Jy/beam ! Clean residual mean=0.000002 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.416526 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 123 components and 0.416526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132776Jy sigma=1.207537 ! Fit after self-cal, rms=0.132771Jy sigma=1.207496 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9321 mas, bmaj=2.186 mas, bpa=-1.499 degrees ! Estimated noise=0.388258 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9321 x 2.186 at -1.499 degrees (North through East) ! Clean map min=-0.0054761 max=0.28617 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6712 mas, bmaj=1.632 mas, bpa=-0.8945 degrees ! Estimated noise=0.760546 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.234151 Jy ! Component: 100 - total flux cleaned = 0.309892 Jy ! Component: 150 - total flux cleaned = 0.350232 Jy ! Component: 200 - total flux cleaned = 0.375647 Jy ! Total flux subtracted in 200 components = 0.375647 Jy ! Clean residual min=-0.008239 max=0.013401 Jy/beam ! Clean residual mean=-0.000001 rms=0.001757 Jy/beam ! Combined flux in latest and established models = 0.375647 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.375647 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9321 mas, bmaj=2.186 mas, bpa=-1.499 degrees ! Estimated noise=0.388258 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209547 Jy ! Component: 100 - total flux cleaned = 0.0308897 Jy ! Component: 150 - total flux cleaned = 0.0366311 Jy ! Component: 200 - total flux cleaned = 0.0401641 Jy ! Total flux subtracted in 200 components = 0.0401641 Jy ! Clean residual min=-0.002766 max=0.003326 Jy/beam ! Clean residual mean=0.000000 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.415811 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 44 components and 0.415811 Jy ! Inverting map ! Added new window around map position (-0.6, 4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215019 Jy ! Component: 100 - total flux cleaned = 0.00233959 Jy ! Component: 150 - total flux cleaned = 0.00242809 Jy ! Component: 200 - total flux cleaned = 0.00250373 Jy ! Total flux subtracted in 200 components = 0.00250373 Jy ! Clean residual min=-0.002755 max=0.002350 Jy/beam ! Clean residual mean=0.000001 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.418315 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 59 components and 0.418315 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.552 mas, bmaj=6.585 mas, bpa=-0.3536 degrees ! Estimated noise=0.445821 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00061239 Jy ! Component: 100 - total flux cleaned = -0.000867327 Jy ! Component: 150 - total flux cleaned = -0.00116887 Jy ! Component: 200 - total flux cleaned = -0.00128361 Jy ! Total flux subtracted in 200 components = -0.00128361 Jy ! Clean residual min=-0.002051 max=0.001824 Jy/beam ! Clean residual mean=0.000002 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 0.417031 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138033 Jy ! Component: 100 - total flux cleaned = -0.000201767 Jy ! Component: 150 - total flux cleaned = -0.000262257 Jy ! Component: 200 - total flux cleaned = -0.000319784 Jy ! Total flux subtracted in 200 components = -0.000319784 Jy ! Clean residual min=-0.001923 max=0.001802 Jy/beam ! Clean residual mean=0.000002 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.416711 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.416711 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9321 mas, bmaj=2.186 mas, bpa=-1.499 degrees ! Estimated noise=0.388258 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000567996 Jy ! Component: 100 - total flux cleaned = 0.000785043 Jy ! Component: 150 - total flux cleaned = 0.000653486 Jy ! Component: 200 - total flux cleaned = 0.000655418 Jy ! Total flux subtracted in 200 components = 0.000655418 Jy ! Clean residual min=-0.002376 max=0.002105 Jy/beam ! Clean residual mean=0.000001 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.417367 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 95 components and 0.417367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.132954Jy sigma=1.208400 ! Fit after self-cal, rms=0.132887Jy sigma=1.207935 wmodel J2359-3133_X_map.mod ! Writing 95 model components to file: J2359-3133_X_map.mod wobs J2359-3133_X_uvs.fits ! Writing UV FITS file: J2359-3133_X_uvs.fits wwins J2359-3133_X_map.win ! wwins: Wrote 7 windows to J2359-3133_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000286174 Jy ! Component: 100 - total flux cleaned = -0.000107396 Jy ! Component: 150 - total flux cleaned = -4.12257e-05 Jy ! Component: 200 - total flux cleaned = 0.000114894 Jy ! Component: 250 - total flux cleaned = 0.000295176 Jy ! Component: 300 - total flux cleaned = 0.000382004 Jy ! Component: 350 - total flux cleaned = 0.000495671 Jy ! Component: 400 - total flux cleaned = 0.000663176 Jy ! Component: 450 - total flux cleaned = 0.000854115 Jy ! Component: 500 - total flux cleaned = 0.00101439 Jy ! Component: 550 - total flux cleaned = 0.00111959 Jy ! Component: 600 - total flux cleaned = 0.00135237 Jy ! Component: 650 - total flux cleaned = 0.0014798 Jy ! Component: 700 - total flux cleaned = 0.00163111 Jy ! Component: 750 - total flux cleaned = 0.00178 Jy ! Component: 800 - total flux cleaned = 0.00190227 Jy ! Component: 850 - total flux cleaned = 0.00195092 Jy ! Component: 900 - total flux cleaned = 0.00199897 Jy ! Component: 950 - total flux cleaned = 0.00211776 Jy ! Component: 1000 - total flux cleaned = 0.00221112 Jy ! Component: 1050 - total flux cleaned = 0.00228066 Jy ! Component: 1100 - total flux cleaned = 0.00234912 Jy ! Component: 1150 - total flux cleaned = 0.00243984 Jy ! Component: 1200 - total flux cleaned = 0.00248464 Jy ! Component: 1250 - total flux cleaned = 0.00259616 Jy ! Component: 1300 - total flux cleaned = 0.00268422 Jy ! Component: 1350 - total flux cleaned = 0.00268443 Jy ! Component: 1400 - total flux cleaned = 0.00277126 Jy ! Component: 1450 - total flux cleaned = 0.00281419 Jy ! Component: 1500 - total flux cleaned = 0.00287792 Jy ! Component: 1550 - total flux cleaned = 0.00287782 Jy ! Component: 1600 - total flux cleaned = 0.0028573 Jy ! Component: 1650 - total flux cleaned = 0.00298181 Jy ! Component: 1700 - total flux cleaned = 0.00300248 Jy ! Component: 1750 - total flux cleaned = 0.00302313 Jy ! Component: 1800 - total flux cleaned = 0.0030637 Jy ! Component: 1850 - total flux cleaned = 0.00320462 Jy ! Component: 1900 - total flux cleaned = 0.00320451 Jy ! Component: 1950 - total flux cleaned = 0.00322423 Jy ! Component: 2000 - total flux cleaned = 0.00324377 Jy ! Component: 2050 - total flux cleaned = 0.00332194 Jy ! Component: 2100 - total flux cleaned = 0.00332207 Jy ! Component: 2150 - total flux cleaned = 0.00332194 Jy ! Component: 2200 - total flux cleaned = 0.00332183 Jy ! Component: 2250 - total flux cleaned = 0.00343576 Jy ! Component: 2300 - total flux cleaned = 0.00341682 Jy ! Component: 2350 - total flux cleaned = 0.00341681 Jy ! Component: 2400 - total flux cleaned = 0.00351015 Jy ! Component: 2450 - total flux cleaned = 0.00349191 Jy ! Component: 2500 - total flux cleaned = 0.00349214 Jy ! Component: 2550 - total flux cleaned = 0.00361989 Jy ! Component: 2600 - total flux cleaned = 0.00361981 Jy ! Component: 2650 - total flux cleaned = 0.00360171 Jy ! Component: 2700 - total flux cleaned = 0.00358393 Jy ! Component: 2750 - total flux cleaned = 0.00369087 Jy ! Component: 2800 - total flux cleaned = 0.00369102 Jy ! Component: 2850 - total flux cleaned = 0.00374387 Jy ! Component: 2900 - total flux cleaned = 0.00381397 Jy ! Component: 2950 - total flux cleaned = 0.00374435 Jy ! Component: 3000 - total flux cleaned = 0.00377907 Jy ! Component: 3050 - total flux cleaned = 0.00379648 Jy ! Component: 3100 - total flux cleaned = 0.00386524 Jy ! Component: 3150 - total flux cleaned = 0.00389935 Jy ! Component: 3200 - total flux cleaned = 0.00391629 Jy ! Component: 3250 - total flux cleaned = 0.00398378 Jy ! Component: 3300 - total flux cleaned = 0.00401739 Jy ! Component: 3350 - total flux cleaned = 0.00406752 Jy ! Component: 3400 - total flux cleaned = 0.00408421 Jy ! Component: 3450 - total flux cleaned = 0.00406771 Jy ! Component: 3500 - total flux cleaned = 0.00413345 Jy ! Component: 3550 - total flux cleaned = 0.00414981 Jy ! Component: 3600 - total flux cleaned = 0.00416615 Jy ! Component: 3650 - total flux cleaned = 0.0042147 Jy ! Component: 3700 - total flux cleaned = 0.00416633 Jy ! Component: 3750 - total flux cleaned = 0.00423063 Jy ! Component: 3800 - total flux cleaned = 0.00419878 Jy ! Component: 3850 - total flux cleaned = 0.00421475 Jy ! Component: 3900 - total flux cleaned = 0.00427805 Jy ! Component: 3950 - total flux cleaned = 0.00426229 Jy ! Component: 4000 - total flux cleaned = 0.00423099 Jy ! Component: 4050 - total flux cleaned = 0.00427787 Jy ! Total flux subtracted in 4096 components = 0.00426237 Jy ! Clean residual min=-0.000852 max=0.000891 Jy/beam ! Clean residual mean=0.000001 rms=0.000275 Jy/beam ! Combined flux in latest and established models = 0.421629 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 369 components and 0.421629 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J2359-3133_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9321 x 2.186 at -1.499 degrees (North through East) ! Clean map min=-0.0020039 max=0.29992 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J2359-3133_X_map.fits wmodel /vlbi/bp222/temp_maps//J2359-3133_X_map.mod ! Writing 369 model components to file: /vlbi/bp222/temp_maps//J2359-3133_X_map.mod wobs /vlbi/bp222/temp_maps//J2359-3133_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J2359-3133_X_uvs.fits wwins /vlbi/bp222/temp_maps//J2359-3133_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/temp_maps//J2359-3133_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.29992 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000274494 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.274567 0.274567 0.549135 1.09827 2.19654 4.39308 8.78615 17.5723 35.1446 70.2892 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.299 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1092.63 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J2359-3133_X_dfm.log closed on Thu Feb 14 23:08:46 2019