! Started logfile: /vlbi/bp222/temp_maps//J2358+0430_X_dfm.log on Thu Feb 14 23:08:27 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J2358+0430_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J2358+0430_X_uvm.fits ! AN table 1: 23 integrations on 28 of 28 possible baselines. ! AN table 2: 24 integrations on 45 of 45 possible baselines. ! AN table 3: 72 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.970806 visibilities/baseline/integration-bin. ! Found source: J2358+0430 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 50280 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2358+0430_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 3 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.010801Jy sigma=16.195983 ! Fit after self-cal, rms=0.898502Jy sigma=14.388887 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6356 mas, bmaj=1.691 mas, bpa=-4.389 degrees ! Estimated noise=0.367435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.076572 Jy ! Component: 100 - total flux cleaned = 0.0980301 Jy ! Total flux subtracted in 100 components = 0.0980301 Jy ! Clean residual min=-0.004745 max=0.009567 Jy/beam ! Clean residual mean=-0.000002 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.0980302 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0980302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.067180Jy sigma=0.997567 ! Fit after self-cal, rms=0.066830Jy sigma=0.993703 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115382 Jy ! Component: 100 - total flux cleaned = 0.0182825 Jy ! Total flux subtracted in 100 components = 0.0182825 Jy ! Clean residual min=-0.003092 max=0.005581 Jy/beam ! Clean residual mean=-0.000001 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.116313 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 15 components and 0.116313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064340Jy sigma=0.948574 ! Fit after self-cal, rms=0.064262Jy sigma=0.947657 ! Inverting map ! Added new window around map position (0.4, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00583154 Jy ! Component: 100 - total flux cleaned = 0.00952545 Jy ! Total flux subtracted in 100 components = 0.00952545 Jy ! Clean residual min=-0.002608 max=0.003453 Jy/beam ! Clean residual mean=-0.000001 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.125838 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.125838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063612Jy sigma=0.935444 ! Fit after self-cal, rms=0.063566Jy sigma=0.934840 ! Inverting map ! Added new window around map position (-4.4, 14.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341802 Jy ! Component: 100 - total flux cleaned = 0.00522062 Jy ! Total flux subtracted in 100 components = 0.00522062 Jy ! Clean residual min=-0.002229 max=0.002344 Jy/beam ! Clean residual mean=-0.000001 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.131059 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 32 components and 0.131059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063387Jy sigma=0.931845 ! Fit after self-cal, rms=0.063373Jy sigma=0.931665 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8129 mas, bmaj=1.99 mas, bpa=-4.229 degrees ! Estimated noise=0.204854 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017483 Jy ! Component: 100 - total flux cleaned = 0.00213982 Jy ! Component: 150 - total flux cleaned = 0.00227683 Jy ! Component: 200 - total flux cleaned = 0.0023539 Jy ! Total flux subtracted in 200 components = 0.0023539 Jy ! Clean residual min=-0.001990 max=0.002273 Jy/beam ! Clean residual mean=0.000000 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.133413 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 45 components and 0.133413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063286Jy sigma=0.929800 ! Fit after self-cal, rms=0.063279Jy sigma=0.929699 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8129 x 1.99 at -4.229 degrees (North through East) ! Clean map min=-0.0019552 max=0.10198 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.86 HN 0.91 LA 1.06 ! MK 0.89 NL 1.13 OV 0.90 PT 0.86 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 0.91 KP 1.00 ! LA 0.99 MK 1.11 NL 0.98 OV 0.94 ! PT 0.92 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.07 HN 0.97 LA 1.07 ! MK 1.03 NL 0.97 OV 1.05 PT 1.07 ! SC 0.95 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.89 HN 0.86 LA 1.06 ! MK 0.84 NL 1.21 OV 0.89 PT 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.97 HN 0.97 KP 1.02 ! LA 0.98 MK 1.08 NL 0.96 OV 0.89 ! PT 0.95 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.03 HN 1.00 LA 1.08 ! MK 1.04 NL 0.94 OV 1.05 PT 1.12 ! SC 0.94 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.91 HN 0.92 LA 1.15 ! MK 0.80 NL 1.16 OV 0.87 PT 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.95 HN 0.92 KP 1.02 ! LA 1.00 MK 1.08 NL 0.97 OV 0.92 ! PT 0.96 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.04 HN 1.02 LA 1.05 ! MK 1.06 NL 0.96 OV 1.07 PT 1.13 ! SC 0.94 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.87 HN 0.89 LA 1.04 ! MK 0.92 NL 1.15 OV 0.89 PT 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.96 HN 0.88 KP 0.98 ! LA 0.99 MK 1.05 NL 0.97 OV 0.90 ! PT 0.94 SC 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.07 HN 0.97 LA 1.05 ! MK 1.03 NL 0.98 OV 1.04 PT 1.10 ! SC 0.93 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.95 HN 0.92 LA 1.06 ! MK 0.81 NL 1.15 OV 0.89 PT 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.99 HN 0.96 KP 1.00 ! LA 0.99 MK 1.07 NL 0.97 OV 0.88 ! PT 0.95 SC 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 1.04 HN 0.98 LA 1.06 ! MK 1.05 NL 0.96 OV 1.06 PT 1.10 ! SC 0.95 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.85 HN 0.95 LA 1.04 ! MK 0.83 NL 1.17 OV 0.89 PT 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.94 HN 0.89 KP 0.99 ! LA 1.02 MK 1.14 NL 0.95 OV 0.88 ! PT 0.94 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.07 HN 0.99 LA 1.06 ! MK 1.08 NL 0.99 OV 1.06 PT 1.08 ! SC 0.93 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.88 HN 0.93 LA 1.09 ! MK 0.86 NL 1.11 OV 0.91 PT 0.83 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 HN 0.95 KP 1.01 ! LA 0.99 MK 1.09 NL 0.93 OV 0.90 ! PT 0.95 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 1.06 HN 0.99 LA 1.02 ! MK 1.01 NL 0.97 OV 1.07 PT 1.11 ! SC 0.94 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.88 HN 0.90 LA 1.12 ! MK 0.90 NL 1.21 OV 0.90 PT 0.82 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.94 HN 0.97 KP 1.00 ! LA 1.01 MK 1.10 NL 0.95 OV 0.90 ! PT 0.93 SC 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.05 HN 1.01 LA 1.04 ! MK 1.02 NL 0.97 OV 1.06 PT 1.08 ! SC 0.96 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.86 HN 0.95 LA 0.99 ! MK 0.90 NL 1.21 OV 0.89 PT 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.93 HN 0.89 KP 1.00 ! LA 1.01 MK 1.06 NL 0.95 OV 0.92 ! PT 0.96 SC 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 FD 1.03 HN 0.97 LA 1.07 ! MK 1.07 NL 0.98 OV 1.02 PT 1.12 ! SC 1.00 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.90 HN 0.94 LA 1.13 ! MK 0.83 NL 1.14 OV 0.87 PT 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.97 HN 0.83 KP 1.01 ! LA 0.95 MK 1.17 NL 0.90 OV 0.88 ! PT 0.97 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.07 HN 0.98 LA 1.06 ! MK 1.07 NL 0.92 OV 1.02 PT 1.10 ! SC 1.00 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.88 HN 0.84 LA 1.01 ! MK 0.85 NL 1.19 OV 0.91 PT 0.82 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.99 HN 0.93 KP 1.01 ! LA 0.99 MK 1.06 NL 0.92 OV 0.89 ! PT 0.95 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.05 HN 1.01 LA 1.02 ! MK 1.08 NL 0.94 OV 1.06 PT 1.14 ! SC 0.94 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.95 HN 0.81 LA 1.20 ! MK 0.80 NL 1.25 OV 0.93 PT 0.83 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.96 HN 0.91 KP 1.04 ! LA 1.01 MK 1.01 NL 0.99 OV 0.88 ! PT 0.96 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.05 HN 1.00 LA 1.03 ! MK 1.06 NL 0.87 OV 1.05 PT 1.09 ! SC 0.95 ! ! ! Fit before self-cal, rms=0.063279Jy sigma=0.929699 ! Fit after self-cal, rms=0.061906Jy sigma=0.911447 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8122 mas, bmaj=1.976 mas, bpa=-4.027 degrees ! Estimated noise=0.203581 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000723818 Jy ! Component: 100 - total flux cleaned = 0.000803351 Jy ! Component: 150 - total flux cleaned = 0.00073117 Jy ! Component: 200 - total flux cleaned = 0.000656854 Jy ! Total flux subtracted in 200 components = 0.000656854 Jy ! Clean residual min=-0.000883 max=0.000846 Jy/beam ! Clean residual mean=0.000000 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.13407 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.13407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061887Jy sigma=0.911086 ! Fit after self-cal, rms=0.062026Jy sigma=0.910789 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062026Jy sigma=0.910789 ! Fit after self-cal, rms=0.062116Jy sigma=0.910438 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8115 mas, bmaj=1.976 mas, bpa=-4.069 degrees ! Estimated noise=0.203757 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000397554 Jy ! Component: 100 - total flux cleaned = 0.00039811 Jy ! Component: 150 - total flux cleaned = 0.000359884 Jy ! Component: 200 - total flux cleaned = 0.000297894 Jy ! Total flux subtracted in 200 components = 0.000297894 Jy ! Clean residual min=-0.000827 max=0.000784 Jy/beam ! Clean residual mean=0.000000 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.134367 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 61 components and 0.134367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062107Jy sigma=0.910284 ! Fit after self-cal, rms=0.062112Jy sigma=0.910231 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.59153e-05 Jy ! Component: 100 - total flux cleaned = 2.35488e-05 Jy ! Component: 150 - total flux cleaned = -2.37001e-05 Jy ! Component: 200 - total flux cleaned = -5.61859e-05 Jy ! Total flux subtracted in 200 components = -5.61859e-05 Jy ! Clean residual min=-0.000830 max=0.000779 Jy/beam ! Clean residual mean=0.000000 rms=0.000192 Jy/beam ! Combined flux in latest and established models = 0.134311 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.134311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062107Jy sigma=0.910153 ! Fit after self-cal, rms=0.062105Jy sigma=0.910122 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062105Jy sigma=0.910122 ! Fit after self-cal, rms=0.062161Jy sigma=0.909326 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8113 mas, bmaj=1.977 mas, bpa=-4.078 degrees ! Estimated noise=0.203853 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219943 Jy ! Component: 100 - total flux cleaned = 0.00021163 Jy ! Component: 150 - total flux cleaned = 0.000170282 Jy ! Component: 200 - total flux cleaned = 0.000127303 Jy ! Total flux subtracted in 200 components = 0.000127303 Jy ! Clean residual min=-0.000788 max=0.000731 Jy/beam ! Clean residual mean=-0.000000 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.134439 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 68 components and 0.134439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062157Jy sigma=0.909260 ! Fit after self-cal, rms=0.062158Jy sigma=0.909217 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.53634e-05 Jy ! Component: 100 - total flux cleaned = 8.86237e-06 Jy ! Component: 150 - total flux cleaned = -2.6475e-05 Jy ! Component: 200 - total flux cleaned = -3.24893e-05 Jy ! Total flux subtracted in 200 components = -3.24893e-05 Jy ! Clean residual min=-0.000786 max=0.000717 Jy/beam ! Clean residual mean=-0.000000 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.134406 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.134406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062155Jy sigma=0.909172 ! Fit after self-cal, rms=0.062154Jy sigma=0.909161 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062154Jy sigma=0.909161 ! Fit after self-cal, rms=0.062211Jy sigma=0.909149 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.927 mas, bmaj=3.089 mas, bpa=-2.017 degrees ! Estimated noise=0.272547 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202416 Jy ! Component: 100 - total flux cleaned = 0.000159503 Jy ! Component: 150 - total flux cleaned = 0.000140542 Jy ! Component: 200 - total flux cleaned = 0.000124634 Jy ! Total flux subtracted in 200 components = 0.000124634 Jy ! Clean residual min=-0.000948 max=0.000840 Jy/beam ! Clean residual mean=-0.000000 rms=0.000229 Jy/beam ! Combined flux in latest and established models = 0.134531 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 77 components and 0.134531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062210Jy sigma=0.909120 ! Fit after self-cal, rms=0.062208Jy sigma=0.909106 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.77819e-06 Jy ! Component: 100 - total flux cleaned = -2.88966e-05 Jy ! Component: 150 - total flux cleaned = -4.44919e-05 Jy ! Component: 200 - total flux cleaned = -5.77826e-05 Jy ! Total flux subtracted in 200 components = -5.77826e-05 Jy ! Clean residual min=-0.000927 max=0.000826 Jy/beam ! Clean residual mean=-0.000000 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.134473 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 78 components and 0.134473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062208Jy sigma=0.909090 ! Fit after self-cal, rms=0.062207Jy sigma=0.909077 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8114 mas, bmaj=1.977 mas, bpa=-4.079 degrees ! Estimated noise=0.204001 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8114 x 1.977 at -4.079 degrees (North through East) ! Clean map min=-0.0011068 max=0.1012 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6357 mas, bmaj=1.683 mas, bpa=-4.247 degrees ! Estimated noise=0.363909 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0753833 Jy ! Component: 100 - total flux cleaned = 0.0988515 Jy ! Component: 150 - total flux cleaned = 0.110661 Jy ! Component: 200 - total flux cleaned = 0.118024 Jy ! Total flux subtracted in 200 components = 0.118024 Jy ! Clean residual min=-0.002463 max=0.004043 Jy/beam ! Clean residual mean=-0.000000 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.118024 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.118024 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8114 mas, bmaj=1.977 mas, bpa=-4.079 degrees ! Estimated noise=0.204001 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00686911 Jy ! Component: 100 - total flux cleaned = 0.0108295 Jy ! Component: 150 - total flux cleaned = 0.0132769 Jy ! Component: 200 - total flux cleaned = 0.0148169 Jy ! Total flux subtracted in 200 components = 0.0148169 Jy ! Clean residual min=-0.000862 max=0.001032 Jy/beam ! Clean residual mean=-0.000000 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.132841 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 40 components and 0.132841 Jy ! Inverting map ! Added new window around map position (1, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000900341 Jy ! Component: 100 - total flux cleaned = 0.0012322 Jy ! Component: 150 - total flux cleaned = 0.00134281 Jy ! Component: 200 - total flux cleaned = 0.00143792 Jy ! Total flux subtracted in 200 components = 0.00143792 Jy ! Clean residual min=-0.000820 max=0.000786 Jy/beam ! Clean residual mean=-0.000000 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.134279 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 52 components and 0.134279 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.927 mas, bmaj=3.089 mas, bpa=-2.017 degrees ! Estimated noise=0.272547 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.16939e-05 Jy ! Component: 100 - total flux cleaned = 0.000103745 Jy ! Component: 150 - total flux cleaned = 0.000117977 Jy ! Component: 200 - total flux cleaned = 0.000130555 Jy ! Total flux subtracted in 200 components = 0.000130555 Jy ! Clean residual min=-0.000941 max=0.000814 Jy/beam ! Clean residual mean=-0.000000 rms=0.000224 Jy/beam ! Combined flux in latest and established models = 0.13441 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.01117e-05 Jy ! Component: 100 - total flux cleaned = 2.00801e-05 Jy ! Component: 150 - total flux cleaned = 1.99145e-05 Jy ! Component: 200 - total flux cleaned = 1.28793e-05 Jy ! Total flux subtracted in 200 components = 1.28793e-05 Jy ! Clean residual min=-0.000962 max=0.000791 Jy/beam ! Clean residual mean=-0.000000 rms=0.000222 Jy/beam ! Combined flux in latest and established models = 0.134423 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 82 components and 0.134423 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8114 mas, bmaj=1.977 mas, bpa=-4.079 degrees ! Estimated noise=0.204001 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.21537e-07 Jy ! Component: 100 - total flux cleaned = 4.35986e-05 Jy ! Component: 150 - total flux cleaned = 8.2174e-05 Jy ! Component: 200 - total flux cleaned = 8.22056e-05 Jy ! Total flux subtracted in 200 components = 8.22056e-05 Jy ! Clean residual min=-0.000820 max=0.000703 Jy/beam ! Clean residual mean=-0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.134505 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 90 components and 0.134505 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062202Jy sigma=0.909046 ! Fit after self-cal, rms=0.062204Jy sigma=0.909012 wmodel J2358+0430_X_map.mod ! Writing 90 model components to file: J2358+0430_X_map.mod wobs J2358+0430_X_uvs.fits ! Writing UV FITS file: J2358+0430_X_uvs.fits wwins J2358+0430_X_map.win ! wwins: Wrote 4 windows to J2358+0430_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.35897e-05 Jy ! Component: 100 - total flux cleaned = -0.000119025 Jy ! Component: 150 - total flux cleaned = -0.000191534 Jy ! Component: 200 - total flux cleaned = -0.000250318 Jy ! Component: 250 - total flux cleaned = -0.000342137 Jy ! Component: 300 - total flux cleaned = -0.000398295 Jy ! Component: 350 - total flux cleaned = -0.000464671 Jy ! Component: 400 - total flux cleaned = -0.00051922 Jy ! Component: 450 - total flux cleaned = -0.0005621 Jy ! Component: 500 - total flux cleaned = -0.000614892 Jy ! Component: 550 - total flux cleaned = -0.000666965 Jy ! Component: 600 - total flux cleaned = -0.000718236 Jy ! Component: 650 - total flux cleaned = -0.000779018 Jy ! Component: 700 - total flux cleaned = -0.000819109 Jy ! Component: 750 - total flux cleaned = -0.000858775 Jy ! Component: 800 - total flux cleaned = -0.000927506 Jy ! Component: 850 - total flux cleaned = -0.000966406 Jy ! Component: 900 - total flux cleaned = -0.000966585 Jy ! Component: 950 - total flux cleaned = -0.00100493 Jy ! Component: 1000 - total flux cleaned = -0.00107099 Jy ! Component: 1050 - total flux cleaned = -0.00107088 Jy ! Component: 1100 - total flux cleaned = -0.00106148 Jy ! Component: 1150 - total flux cleaned = -0.00108905 Jy ! Component: 1200 - total flux cleaned = -0.00113467 Jy ! Component: 1250 - total flux cleaned = -0.00111651 Jy ! Component: 1300 - total flux cleaned = -0.00112557 Jy ! Component: 1350 - total flux cleaned = -0.00119683 Jy ! Component: 1400 - total flux cleaned = -0.00121446 Jy ! Component: 1450 - total flux cleaned = -0.00120578 Jy ! Component: 1500 - total flux cleaned = -0.00126668 Jy ! Component: 1550 - total flux cleaned = -0.0012753 Jy ! Component: 1600 - total flux cleaned = -0.00130967 Jy ! Component: 1650 - total flux cleaned = -0.00133514 Jy ! Component: 1700 - total flux cleaned = -0.00134364 Jy ! Component: 1750 - total flux cleaned = -0.00139398 Jy ! Component: 1800 - total flux cleaned = -0.00139392 Jy ! Component: 1850 - total flux cleaned = -0.001427 Jy ! Component: 1900 - total flux cleaned = -0.00142699 Jy ! Component: 1950 - total flux cleaned = -0.00144334 Jy ! Component: 2000 - total flux cleaned = -0.00147585 Jy ! Component: 2050 - total flux cleaned = -0.00150814 Jy ! Component: 2100 - total flux cleaned = -0.0015242 Jy ! Component: 2150 - total flux cleaned = -0.00151615 Jy ! Component: 2200 - total flux cleaned = -0.00154786 Jy ! Component: 2250 - total flux cleaned = -0.0015478 Jy ! Component: 2300 - total flux cleaned = -0.00157922 Jy ! Component: 2350 - total flux cleaned = -0.00160255 Jy ! Component: 2400 - total flux cleaned = -0.00161798 Jy ! Component: 2450 - total flux cleaned = -0.00162571 Jy ! Component: 2500 - total flux cleaned = -0.00164097 Jy ! Component: 2550 - total flux cleaned = -0.00165616 Jy ! Component: 2600 - total flux cleaned = -0.00167123 Jy ! Component: 2650 - total flux cleaned = -0.00168623 Jy ! Component: 2700 - total flux cleaned = -0.00168624 Jy ! Component: 2750 - total flux cleaned = -0.00172336 Jy ! Component: 2800 - total flux cleaned = -0.00174547 Jy ! Component: 2850 - total flux cleaned = -0.00175277 Jy ! Component: 2900 - total flux cleaned = -0.00175282 Jy ! Component: 2950 - total flux cleaned = -0.00178186 Jy ! Component: 3000 - total flux cleaned = -0.0017963 Jy ! Component: 3050 - total flux cleaned = -0.00180352 Jy ! Component: 3100 - total flux cleaned = -0.00181782 Jy ! Component: 3150 - total flux cleaned = -0.00183909 Jy ! Component: 3200 - total flux cleaned = -0.00186738 Jy ! Component: 3250 - total flux cleaned = -0.00188854 Jy ! Component: 3300 - total flux cleaned = -0.00188158 Jy ! Component: 3350 - total flux cleaned = -0.00188159 Jy ! Component: 3400 - total flux cleaned = -0.00187467 Jy ! Component: 3450 - total flux cleaned = -0.00193664 Jy ! Component: 3500 - total flux cleaned = -0.00192981 Jy ! Component: 3550 - total flux cleaned = -0.00193663 Jy ! Component: 3600 - total flux cleaned = -0.00197059 Jy ! Component: 3650 - total flux cleaned = -0.00197733 Jy ! Component: 3700 - total flux cleaned = -0.00198401 Jy ! Component: 3750 - total flux cleaned = -0.00199734 Jy ! Component: 3800 - total flux cleaned = -0.00200404 Jy ! Component: 3850 - total flux cleaned = -0.00203053 Jy ! Component: 3900 - total flux cleaned = -0.00203714 Jy ! Component: 3950 - total flux cleaned = -0.00203714 Jy ! Component: 4000 - total flux cleaned = -0.00205018 Jy ! Component: 4050 - total flux cleaned = -0.00207621 Jy ! Total flux subtracted in 4096 components = -0.00207625 Jy ! Clean residual min=-0.000415 max=0.000401 Jy/beam ! Clean residual mean=0.000000 rms=0.000117 Jy/beam ! Combined flux in latest and established models = 0.132428 Jy keep ! Adding 324 model components to the UV plane model. ! The established model now contains 414 components and 0.132429 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J2358+0430_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8114 x 1.977 at -4.079 degrees (North through East) ! Clean map min=-0.00095619 max=0.1011 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J2358+0430_X_map.fits wmodel /vlbi/bp222/temp_maps//J2358+0430_X_map.mod ! Writing 414 model components to file: /vlbi/bp222/temp_maps//J2358+0430_X_map.mod wobs /vlbi/bp222/temp_maps//J2358+0430_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J2358+0430_X_uvs.fits wwins /vlbi/bp222/temp_maps//J2358+0430_X_map.win ! wwins: Wrote 5 windows to /vlbi/bp222/temp_maps//J2358+0430_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.101098 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00011653 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.345792 0.345792 0.691584 1.38317 2.76634 5.53268 11.0654 22.1307 44.2614 88.5228 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.101 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 867.573 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J2358+0430_X_dfm.log closed on Thu Feb 14 23:08:34 2019