! Started logfile: /vlbi/bp222/maps//J2324-3714_X_dfm.log on Mon Jan 14 17:28:35 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/maps//J2324-3714_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/maps//J2324-3714_X_uvm.fits ! AN table 1: 23 integrations on 36 of 36 possible baselines. ! AN table 2: 91 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.714159 visibilities/baseline/integration-bin. ! Found source: J2324-3714 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 28932 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2324-3714_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 4 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.151674Jy sigma=12.621372 ! Fit after self-cal, rms=0.486597Jy sigma=4.390995 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6515 mas, bmaj=1.973 mas, bpa=-15.51 degrees ! Estimated noise=0.954768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.425098 Jy ! Component: 100 - total flux cleaned = 0.523328 Jy ! Total flux subtracted in 100 components = 0.523328 Jy ! Clean residual min=-0.029918 max=0.088500 Jy/beam ! Clean residual mean=0.000148 rms=0.007196 Jy/beam ! Combined flux in latest and established models = 0.523328 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.523328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.184834Jy sigma=1.898236 ! Fit after self-cal, rms=0.184838Jy sigma=1.897732 ! Inverting map ! Added new window around map position (-1, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0726975 Jy ! Component: 100 - total flux cleaned = 0.105831 Jy ! Total flux subtracted in 100 components = 0.105831 Jy ! Clean residual min=-0.024121 max=0.062316 Jy/beam ! Clean residual mean=0.000086 rms=0.005020 Jy/beam ! Combined flux in latest and established models = 0.62916 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 15 components and 0.62916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.154242Jy sigma=1.407695 ! Fit after self-cal, rms=0.151503Jy sigma=1.357411 ! Inverting map ! Added new window around map position (1, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0418576 Jy ! Component: 100 - total flux cleaned = 0.0625767 Jy ! Total flux subtracted in 100 components = 0.0625767 Jy ! Clean residual min=-0.019867 max=0.026321 Jy/beam ! Clean residual mean=0.000047 rms=0.003744 Jy/beam ! Combined flux in latest and established models = 0.691736 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 24 components and 0.691736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.138618Jy sigma=1.174677 ! Fit after self-cal, rms=0.137955Jy sigma=1.169427 ! Inverting map ! Added new window around map position (-1, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192819 Jy ! Component: 100 - total flux cleaned = 0.0248137 Jy ! Total flux subtracted in 100 components = 0.0248137 Jy ! Clean residual min=-0.017664 max=0.015834 Jy/beam ! Clean residual mean=0.000031 rms=0.003367 Jy/beam ! Combined flux in latest and established models = 0.71655 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.71655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.134357Jy sigma=1.129727 ! Fit after self-cal, rms=0.133961Jy sigma=1.127608 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9125 mas, bmaj=2.784 mas, bpa=-15.36 degrees ! Estimated noise=0.416277 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120202 Jy ! Component: 100 - total flux cleaned = 0.0137987 Jy ! Component: 150 - total flux cleaned = 0.0146831 Jy ! Component: 200 - total flux cleaned = 0.015449 Jy ! Total flux subtracted in 200 components = 0.015449 Jy ! Clean residual min=-0.015648 max=0.015871 Jy/beam ! Clean residual mean=0.000053 rms=0.004158 Jy/beam ! Combined flux in latest and established models = 0.731999 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.731999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.131244Jy sigma=1.110807 ! Fit after self-cal, rms=0.130844Jy sigma=1.108988 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9125 x 2.784 at -15.36 degrees (North through East) ! Clean map min=-0.015364 max=0.50738 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 KP 0.95 LA 0.99 ! MK 1.00 NL 1.29 OV 0.97 PT 1.05 ! SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.19 FD 0.94 HN 1.22 LA 0.98 ! MK 1.03 NL 1.04 OV 0.92 PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 KP 0.99 LA 0.98 ! MK 1.00 NL 1.23 OV 0.96 PT 1.04 ! SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.23 FD 0.96 HN 1.19 LA 0.99 ! MK 1.01 NL 1.07 OV 0.91 PT 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.99 KP 0.99 LA 0.98 ! MK 1.01 NL 1.23 OV 0.97 PT 1.05 ! SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.22 FD 0.94 HN 1.23 LA 1.00 ! MK 1.02 NL 1.06 OV 0.92 PT 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 KP 0.99 LA 0.96 ! MK 1.00 NL 1.23 OV 0.97 PT 1.06 ! SC 0.96 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.21 FD 0.94 HN 1.16 LA 0.99 ! MK 1.05 NL 1.06 OV 0.91 PT 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 KP 0.99 LA 0.96 ! MK 1.00 NL 1.23 OV 0.97 PT 1.05 ! SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.22 FD 0.95 HN 1.15 LA 1.00 ! MK 1.03 NL 1.03 OV 0.92 PT 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.98 KP 0.99 LA 0.97 ! MK 0.99 NL 1.22 OV 0.95 PT 1.04 ! SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.22 FD 0.95 HN 1.19 LA 0.98 ! MK 1.03 NL 1.05 OV 0.90 PT 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.98 KP 1.01 LA 0.95 ! MK 1.00 NL 1.23 OV 0.96 PT 1.04 ! SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.22 FD 0.95 HN 1.21 LA 0.98 ! MK 1.03 NL 1.03 OV 0.91 PT 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 KP 0.99 LA 0.96 ! MK 0.99 NL 1.19 OV 0.96 PT 1.04 ! SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.24 FD 0.95 HN 1.22 LA 1.01 ! MK 1.03 NL 1.02 OV 0.91 PT 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 KP 0.98 LA 0.96 ! MK 1.00 NL 1.19 OV 0.95 PT 1.05 ! SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.28 FD 0.93 HN 1.16 LA 0.98 ! MK 1.02 NL 1.03 OV 0.90 PT 1.02 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 KP 0.98 LA 0.95 ! MK 1.01 NL 1.20 OV 0.95 PT 1.06 ! SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.28 FD 0.96 HN 1.18 LA 0.99 ! MK 1.01 NL 1.03 OV 0.89 PT 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.97 KP 0.98 LA 0.96 ! MK 0.97 NL 1.19 OV 0.96 PT 1.05 ! SC 0.98 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.24 FD 0.94 HN 1.18 LA 1.01 ! MK 1.03 NL 1.01 OV 0.90 PT 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 KP 0.98 LA 0.95 ! MK 0.98 NL 1.15 OV 0.95 PT 1.05 ! SC 0.97 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.26 FD 0.94 HN 1.18 LA 0.99 ! MK 1.00 NL 1.04 OV 0.90 PT 1.01 ! ! ! Fit before self-cal, rms=0.130844Jy sigma=1.108988 ! Fit after self-cal, rms=0.129350Jy sigma=0.947933 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9245 mas, bmaj=2.776 mas, bpa=-15.37 degrees ! Estimated noise=0.423116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (16, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319339 Jy ! Component: 100 - total flux cleaned = 0.00481234 Jy ! Component: 150 - total flux cleaned = 0.00652057 Jy ! Component: 200 - total flux cleaned = 0.00814366 Jy ! Total flux subtracted in 200 components = 0.00814366 Jy ! Clean residual min=-0.009559 max=0.010901 Jy/beam ! Clean residual mean=0.000004 rms=0.002096 Jy/beam ! Combined flux in latest and established models = 0.740143 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 73 components and 0.740142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.127431Jy sigma=0.922524 ! Fit after self-cal, rms=0.127328Jy sigma=0.919640 ! Inverting map ! Added new window around map position (3, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00786677 Jy ! Component: 100 - total flux cleaned = 0.00969332 Jy ! Component: 150 - total flux cleaned = 0.0108487 Jy ! Component: 200 - total flux cleaned = 0.0118772 Jy ! Total flux subtracted in 200 components = 0.0118772 Jy ! Clean residual min=-0.008639 max=0.006617 Jy/beam ! Clean residual mean=-0.000015 rms=0.001913 Jy/beam ! Combined flux in latest and established models = 0.75202 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 101 components and 0.75202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125836Jy sigma=0.909521 ! Fit after self-cal, rms=0.125713Jy sigma=0.907945 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125713Jy sigma=0.907945 ! Fit after self-cal, rms=0.126676Jy sigma=0.902991 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9287 mas, bmaj=2.785 mas, bpa=-15.39 degrees ! Estimated noise=0.422461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00547524 Jy ! Component: 100 - total flux cleaned = -0.00549799 Jy ! Component: 150 - total flux cleaned = -0.0048714 Jy ! Component: 200 - total flux cleaned = -0.00417734 Jy ! Total flux subtracted in 200 components = -0.00417734 Jy ! Clean residual min=-0.007537 max=0.005973 Jy/beam ! Clean residual mean=-0.000010 rms=0.001737 Jy/beam ! Combined flux in latest and established models = 0.747842 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 115 components and 0.747842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125912Jy sigma=0.897975 ! Fit after self-cal, rms=0.125859Jy sigma=0.897067 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.36958e-05 Jy ! Component: 100 - total flux cleaned = 0.00105048 Jy ! Component: 150 - total flux cleaned = 0.0013736 Jy ! Component: 200 - total flux cleaned = 0.00178127 Jy ! Total flux subtracted in 200 components = 0.00178127 Jy ! Clean residual min=-0.007306 max=0.005691 Jy/beam ! Clean residual mean=-0.000010 rms=0.001701 Jy/beam ! Combined flux in latest and established models = 0.749623 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 130 components and 0.749623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125501Jy sigma=0.895039 ! Fit after self-cal, rms=0.125460Jy sigma=0.894493 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125460Jy sigma=0.894493 ! Fit after self-cal, rms=0.127132Jy sigma=0.867141 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9328 mas, bmaj=2.786 mas, bpa=-15.41 degrees ! Estimated noise=0.423114 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00485976 Jy ! Component: 100 - total flux cleaned = -0.00568816 Jy ! Component: 150 - total flux cleaned = -0.00674903 Jy ! Component: 200 - total flux cleaned = -0.00715769 Jy ! Total flux subtracted in 200 components = -0.00715769 Jy ! Clean residual min=-0.006463 max=0.004485 Jy/beam ! Clean residual mean=0.000019 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 0.742466 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 147 components and 0.742466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126743Jy sigma=0.863793 ! Fit after self-cal, rms=0.126791Jy sigma=0.863327 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00050585 Jy ! Component: 100 - total flux cleaned = -0.000674366 Jy ! Component: 150 - total flux cleaned = -0.00120482 Jy ! Component: 200 - total flux cleaned = -0.00134104 Jy ! Total flux subtracted in 200 components = -0.00134104 Jy ! Clean residual min=-0.006193 max=0.004384 Jy/beam ! Clean residual mean=0.000020 rms=0.001183 Jy/beam ! Combined flux in latest and established models = 0.741125 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 162 components and 0.741125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126605Jy sigma=0.862440 ! Fit after self-cal, rms=0.126581Jy sigma=0.862140 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126581Jy sigma=0.862140 ! Fit after self-cal, rms=0.128411Jy sigma=0.860775 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.455 mas, bmaj=8.598 mas, bpa=-5.447 degrees ! Estimated noise=0.472874 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0036037 Jy ! Component: 100 - total flux cleaned = -0.00393827 Jy ! Component: 150 - total flux cleaned = -0.00393834 Jy ! Component: 200 - total flux cleaned = -0.00398112 Jy ! Total flux subtracted in 200 components = -0.00398112 Jy ! Clean residual min=-0.005711 max=0.005066 Jy/beam ! Clean residual mean=0.000026 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.737144 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 182 components and 0.737144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.128324Jy sigma=0.859589 ! Fit after self-cal, rms=0.128334Jy sigma=0.859515 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.9629e-05 Jy ! Component: 100 - total flux cleaned = 0.000131004 Jy ! Component: 150 - total flux cleaned = 0.000204773 Jy ! Component: 200 - total flux cleaned = 0.000275667 Jy ! Total flux subtracted in 200 components = 0.000275667 Jy ! Clean residual min=-0.005666 max=0.004912 Jy/beam ! Clean residual mean=0.000026 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 0.737419 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 189 components and 0.737419 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.128312Jy sigma=0.859304 ! Fit after self-cal, rms=0.128305Jy sigma=0.859267 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9353 mas, bmaj=2.788 mas, bpa=-15.42 degrees ! Estimated noise=0.423509 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9353 x 2.788 at -15.42 degrees (North through East) ! Clean map min=-0.0069255 max=0.5251 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.128305Jy sigma=0.859267 ! Fit after self-cal, rms=0.125438Jy sigma=0.757460 ! Inverting map and beam ! Estimated beam: bmin=0.9371 mas, bmaj=2.791 mas, bpa=-15.4 degrees ! Estimated noise=0.422949 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00309555 Jy ! Component: 100 - total flux cleaned = -0.00360783 Jy ! Component: 150 - total flux cleaned = -0.00404555 Jy ! Component: 200 - total flux cleaned = -0.0044279 Jy ! Total flux subtracted in 200 components = -0.0044279 Jy ! Clean residual min=-0.005683 max=0.003901 Jy/beam ! Clean residual mean=0.000016 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 0.732991 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 199 components and 0.732991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125167Jy sigma=0.755736 ! Fit after self-cal, rms=0.125154Jy sigma=0.755535 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000633861 Jy ! Component: 100 - total flux cleaned = -0.000770395 Jy ! Component: 150 - total flux cleaned = -0.00089345 Jy ! Component: 200 - total flux cleaned = -0.00100068 Jy ! Total flux subtracted in 200 components = -0.00100068 Jy ! Clean residual min=-0.005392 max=0.003867 Jy/beam ! Clean residual mean=0.000017 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.731991 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 206 components and 0.731991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125040Jy sigma=0.754935 ! Fit after self-cal, rms=0.125037Jy sigma=0.754833 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.125037Jy sigma=0.754833 ! Fit after self-cal, rms=0.126667Jy sigma=0.753863 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6633 mas, bmaj=1.938 mas, bpa=-15.29 degrees ! Estimated noise=1.00152 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.445251 Jy ! Component: 100 - total flux cleaned = 0.555555 Jy ! Component: 150 - total flux cleaned = 0.60349 Jy ! Component: 200 - total flux cleaned = 0.629461 Jy ! Total flux subtracted in 200 components = 0.629461 Jy ! Clean residual min=-0.010310 max=0.016578 Jy/beam ! Clean residual mean=0.000061 rms=0.002298 Jy/beam ! Combined flux in latest and established models = 0.629461 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.629461 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9387 mas, bmaj=2.791 mas, bpa=-15.41 degrees ! Estimated noise=0.423144 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.029325 Jy ! Component: 100 - total flux cleaned = 0.0458706 Jy ! Component: 150 - total flux cleaned = 0.057854 Jy ! Component: 200 - total flux cleaned = 0.0670843 Jy ! Total flux subtracted in 200 components = 0.0670843 Jy ! Clean residual min=-0.005539 max=0.006823 Jy/beam ! Clean residual mean=0.000055 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.696546 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 62 components and 0.696546 Jy ! Inverting map ! Added new window around map position (-1.6, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00766156 Jy ! Component: 100 - total flux cleaned = 0.0136543 Jy ! Component: 150 - total flux cleaned = 0.0170271 Jy ! Component: 200 - total flux cleaned = 0.0195819 Jy ! Total flux subtracted in 200 components = 0.0195819 Jy ! Clean residual min=-0.005224 max=0.004419 Jy/beam ! Clean residual mean=0.000028 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.716127 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 84 components and 0.716128 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.468 mas, bmaj=8.625 mas, bpa=-5.394 degrees ! Estimated noise=0.470133 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00439778 Jy ! Component: 100 - total flux cleaned = 0.00724912 Jy ! Component: 150 - total flux cleaned = 0.00870795 Jy ! Component: 200 - total flux cleaned = 0.0097118 Jy ! Total flux subtracted in 200 components = 0.0097118 Jy ! Clean residual min=-0.004807 max=0.004805 Jy/beam ! Clean residual mean=0.000030 rms=0.001257 Jy/beam ! Combined flux in latest and established models = 0.725839 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000863282 Jy ! Component: 100 - total flux cleaned = 0.0015587 Jy ! Component: 150 - total flux cleaned = 0.00211556 Jy ! Component: 200 - total flux cleaned = 0.00239176 Jy ! Total flux subtracted in 200 components = 0.00239176 Jy ! Clean residual min=-0.004733 max=0.004599 Jy/beam ! Clean residual mean=0.000026 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.728231 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 112 components and 0.728231 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9387 mas, bmaj=2.791 mas, bpa=-15.41 degrees ! Estimated noise=0.423144 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000389851 Jy ! Component: 100 - total flux cleaned = -2.09608e-05 Jy ! Component: 150 - total flux cleaned = 0.00023803 Jy ! Component: 200 - total flux cleaned = 0.000399595 Jy ! Total flux subtracted in 200 components = 0.000399595 Jy ! Clean residual min=-0.004903 max=0.003932 Jy/beam ! Clean residual mean=0.000015 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.728631 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 134 components and 0.728631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.126584Jy sigma=0.754608 ! Fit after self-cal, rms=0.126418Jy sigma=0.753246 wmodel J2324-3714_X_map.mod ! Writing 134 model components to file: J2324-3714_X_map.mod wobs J2324-3714_X_uvs.fits ! Writing UV FITS file: J2324-3714_X_uvs.fits wwins J2324-3714_X_map.win ! wwins: Wrote 7 windows to J2324-3714_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00084984 Jy ! Component: 100 - total flux cleaned = -0.00183826 Jy ! Component: 150 - total flux cleaned = -0.00264949 Jy ! Component: 200 - total flux cleaned = -0.00342666 Jy ! Component: 250 - total flux cleaned = -0.00406205 Jy ! Component: 300 - total flux cleaned = -0.00462316 Jy ! Component: 350 - total flux cleaned = -0.00522172 Jy ! Component: 400 - total flux cleaned = -0.00559232 Jy ! Component: 450 - total flux cleaned = -0.00590335 Jy ! Component: 500 - total flux cleaned = -0.00610714 Jy ! Component: 550 - total flux cleaned = -0.00640684 Jy ! Component: 600 - total flux cleaned = -0.00655348 Jy ! Component: 650 - total flux cleaned = -0.0068408 Jy ! Component: 700 - total flux cleaned = -0.00712157 Jy ! Component: 750 - total flux cleaned = -0.00725947 Jy ! Component: 800 - total flux cleaned = -0.00753157 Jy ! Component: 850 - total flux cleaned = -0.00771022 Jy ! Component: 900 - total flux cleaned = -0.00793029 Jy ! Component: 950 - total flux cleaned = -0.00823361 Jy ! Component: 1000 - total flux cleaned = -0.00844637 Jy ! Component: 1050 - total flux cleaned = -0.00865685 Jy ! Component: 1100 - total flux cleaned = -0.00894718 Jy ! Component: 1150 - total flux cleaned = -0.00911106 Jy ! Component: 1200 - total flux cleaned = -0.00947576 Jy ! Component: 1250 - total flux cleaned = -0.00963644 Jy ! Component: 1300 - total flux cleaned = -0.00987385 Jy ! Component: 1350 - total flux cleaned = -0.0101865 Jy ! Component: 1400 - total flux cleaned = -0.0103025 Jy ! Component: 1450 - total flux cleaned = -0.010532 Jy ! Component: 1500 - total flux cleaned = -0.0109092 Jy ! Component: 1550 - total flux cleaned = -0.0110205 Jy ! Component: 1600 - total flux cleaned = -0.0112047 Jy ! Component: 1650 - total flux cleaned = -0.0114957 Jy ! Component: 1700 - total flux cleaned = -0.0116027 Jy ! Component: 1750 - total flux cleaned = -0.0117451 Jy ! Component: 1800 - total flux cleaned = -0.0118858 Jy ! Component: 1850 - total flux cleaned = -0.01213 Jy ! Component: 1900 - total flux cleaned = -0.0122341 Jy ! Component: 1950 - total flux cleaned = -0.0125087 Jy ! Component: 2000 - total flux cleaned = -0.0127462 Jy ! Component: 2050 - total flux cleaned = -0.0129817 Jy ! Component: 2100 - total flux cleaned = -0.0130819 Jy ! Component: 2150 - total flux cleaned = -0.013214 Jy ! Component: 2200 - total flux cleaned = -0.0134759 Jy ! Component: 2250 - total flux cleaned = -0.0135405 Jy ! Component: 2300 - total flux cleaned = -0.0137011 Jy ! Component: 2350 - total flux cleaned = -0.0138606 Jy ! Component: 2400 - total flux cleaned = -0.0139873 Jy ! Component: 2450 - total flux cleaned = -0.0141445 Jy ! Component: 2500 - total flux cleaned = -0.0143002 Jy ! Component: 2550 - total flux cleaned = -0.0144234 Jy ! Component: 2600 - total flux cleaned = -0.0146072 Jy ! Component: 2650 - total flux cleaned = -0.0146073 Jy ! Component: 2700 - total flux cleaned = -0.014788 Jy ! Component: 2750 - total flux cleaned = -0.0149973 Jy ! Component: 2800 - total flux cleaned = -0.0150862 Jy ! Component: 2850 - total flux cleaned = -0.0152631 Jy ! Component: 2900 - total flux cleaned = -0.0153508 Jy ! Component: 2950 - total flux cleaned = -0.015554 Jy ! Component: 3000 - total flux cleaned = -0.0156404 Jy ! Component: 3050 - total flux cleaned = -0.0157833 Jy ! Component: 3100 - total flux cleaned = -0.0158683 Jy ! Component: 3150 - total flux cleaned = -0.0160374 Jy ! Component: 3200 - total flux cleaned = -0.0162052 Jy ! Component: 3250 - total flux cleaned = -0.0162327 Jy ! Component: 3300 - total flux cleaned = -0.0162879 Jy ! Component: 3350 - total flux cleaned = -0.0163977 Jy ! Component: 3400 - total flux cleaned = -0.0164523 Jy ! Component: 3450 - total flux cleaned = -0.0165878 Jy ! Component: 3500 - total flux cleaned = -0.0166952 Jy ! Component: 3550 - total flux cleaned = -0.0167753 Jy ! Component: 3600 - total flux cleaned = -0.0168282 Jy ! Component: 3650 - total flux cleaned = -0.0168548 Jy ! Component: 3700 - total flux cleaned = -0.017038 Jy ! Component: 3750 - total flux cleaned = -0.0170382 Jy ! Component: 3800 - total flux cleaned = -0.0172449 Jy ! Component: 3850 - total flux cleaned = -0.0172192 Jy ! Component: 3900 - total flux cleaned = -0.017245 Jy ! Component: 3950 - total flux cleaned = -0.0173463 Jy ! Component: 4000 - total flux cleaned = -0.0173968 Jy ! Component: 4050 - total flux cleaned = -0.017447 Jy ! Total flux subtracted in 4096 components = -0.0173972 Jy ! Clean residual min=-0.001244 max=0.001243 Jy/beam ! Clean residual mean=0.000003 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.711234 Jy keep ! Adding 335 model components to the UV plane model. ! The established model now contains 469 components and 0.711234 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/maps//J2324-3714_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9387 x 2.791 at -15.41 degrees (North through East) ! Clean map min=-0.0038125 max=0.53291 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/maps//J2324-3714_X_map.fits wmodel /vlbi/bp222/maps//J2324-3714_X_map.mod ! Writing 469 model components to file: /vlbi/bp222/maps//J2324-3714_X_map.mod wobs /vlbi/bp222/maps//J2324-3714_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/maps//J2324-3714_X_uvs.fits wwins /vlbi/bp222/maps//J2324-3714_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/maps//J2324-3714_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.53291 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000472397 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.265934 0.265934 0.531869 1.06374 2.12747 4.25495 8.5099 17.0198 34.0396 68.0792 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.532 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1128.1 quit ! Quitting program ! Log file /vlbi/bp222/maps//J2324-3714_X_dfm.log closed on Mon Jan 14 17:28:41 2019