! Started logfile: J2300+0337_S_dfm.log on Fri Feb 15 19:58:44 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     J2300+0337_S_uvm.fits
! Reading UV FITS file: J2300+0337_S_uvm.fits
! AN table 1: 46 integrations on 28 of 28 possible baselines.
! AN table 2: 24 integrations on 45 of 45 possible baselines.
! AN table 3: 46 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.962972 visibilities/baseline/integration-bin.
! Found source: J2300+0337
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 15500 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2300+0337_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 13 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 13 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 13 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  A total of 5 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 368 telescope corrections were flagged in sub-array 1.
!  A total of 240 telescope corrections were flagged in sub-array 2.
!  A total of 414 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.025746Jy  sigma=15.028333
! Fit after  self-cal, rms=0.763150Jy  sigma=11.037638
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
sele I,1,3
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: (none)
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.733 mas, bmaj=7.584 mas, bpa=-8.881 degrees
! Estimated noise=0.671505 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.17889 Jy
! Component: 100  -  total flux cleaned = 0.233558 Jy
! Total flux subtracted in 100 components = 0.233558 Jy
! Clean residual min=-0.011663 max=0.023638 Jy/beam
! Clean residual mean=0.000060 rms=0.003375 Jy/beam
! Combined flux in latest and established models = 0.233558 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.233558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.109303Jy  sigma=1.397346
! Fit after  self-cal, rms=0.109199Jy  sigma=1.396048
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0263511 Jy
! Component: 100  -  total flux cleaned = 0.0410059 Jy
! Total flux subtracted in 100 components = 0.0410059 Jy
! Clean residual min=-0.010948 max=0.010962 Jy/beam
! Clean residual mean=0.000038 rms=0.002650 Jy/beam
! Combined flux in latest and established models = 0.274564 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 24 components and 0.274564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.101215Jy  sigma=1.231411
! Fit after  self-cal, rms=0.101166Jy  sigma=1.230644
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.295 mas, bmaj=8.446 mas, bpa=-8.479 degrees
! Estimated noise=0.472909 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0148123 Jy
! Component: 100  -  total flux cleaned = 0.0230954 Jy
! Component: 150  -  total flux cleaned = 0.0283432 Jy
! Component: 200  -  total flux cleaned = 0.0318034 Jy
! Total flux subtracted in 200 components = 0.0318034 Jy
! Clean residual min=-0.011818 max=0.011911 Jy/beam
! Clean residual mean=0.000046 rms=0.002677 Jy/beam
! Combined flux in latest and established models = 0.306368 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 63 components and 0.306368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.099248Jy  sigma=1.190587
! Fit after  self-cal, rms=0.099211Jy  sigma=1.190211
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.295 x 8.446 at -8.479 degrees (North through East)
! Clean map  min=-0.011194  max=0.24284 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.93     HN        0.96     LA        0.98     
!   MK        0.89     NL        1.07     OV        0.96     PT        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.85     FD        1.08     HN        1.07     KP        1.04     
!   LA        0.98     MK        1.08     NL        1.00     OV        1.08     
!   PT        1.08     SC        1.11     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.83     FD        1.06     HN        1.03     LA        0.93     
!   MK        1.09     NL        0.95     OV        1.04     PT        1.05     
!   SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.67     FD        0.93     HN        0.96     LA        0.98     
!   MK        0.91     NL        1.14     OV        0.95     PT        0.93     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.48     FD        1.11     HN        1.10     KP        1.03     
!   LA        0.97     MK        1.07     NL        1.00     OV        1.06     
!   PT        1.07     SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.16     FD        1.07     HN        1.04     LA        0.94     
!   MK        1.08     NL        0.59     OV        1.06     PT        1.06     
!   SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        0.95     HN        0.98     LA        0.98     
!   MK        0.95     NL        1.15     OV        0.96     PT        0.93     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.91     FD        1.10     HN        1.07     KP        1.03     
!   LA        0.99     MK        1.05     NL        0.97     OV        1.09     
!   PT        1.10     SC        1.09     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.82     FD        1.07     HN        1.03     LA        0.95     
!   MK        1.11     NL        0.76     OV        1.08     PT        1.05     
!   SC        1.04     
! 
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.099211Jy  sigma=1.190211
! Fit after  self-cal, rms=0.094800Jy  sigma=0.942977
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.309 mas, bmaj=8.522 mas, bpa=-8.932 degrees
! Estimated noise=0.470916 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00154318 Jy
! Component: 100  -  total flux cleaned = 0.00181098 Jy
! Component: 150  -  total flux cleaned = 0.00203215 Jy
! Component: 200  -  total flux cleaned = 0.00222451 Jy
! Total flux subtracted in 200 components = 0.00222451 Jy
! Clean residual min=-0.003893 max=0.004396 Jy/beam
! Clean residual mean=0.000013 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.308592 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 69 components and 0.308592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.094754Jy  sigma=0.942066
! Fit after  self-cal, rms=0.095375Jy  sigma=0.939656
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.095375Jy  sigma=0.939656
! Fit after  self-cal, rms=0.117545Jy  sigma=0.941994
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.297 mas, bmaj=8.568 mas, bpa=-9.058 degrees
! Estimated noise=0.475262 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00230187 Jy
! Component: 100  -  total flux cleaned = 0.00268709 Jy
! Component: 150  -  total flux cleaned = 0.00294563 Jy
! Component: 200  -  total flux cleaned = 0.00315563 Jy
! Total flux subtracted in 200 components = 0.00315563 Jy
! Clean residual min=-0.003933 max=0.004257 Jy/beam
! Clean residual mean=0.000012 rms=0.001076 Jy/beam
! Combined flux in latest and established models = 0.311748 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 78 components and 0.311748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.117366Jy  sigma=0.941601
! Fit after  self-cal, rms=0.117449Jy  sigma=0.941490
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.07321e-05 Jy
! Component: 100  -  total flux cleaned = 6.65037e-05 Jy
! Component: 150  -  total flux cleaned = 6.54087e-05 Jy
! Component: 200  -  total flux cleaned = 6.45896e-05 Jy
! Total flux subtracted in 200 components = 6.45896e-05 Jy
! Clean residual min=-0.003928 max=0.004247 Jy/beam
! Clean residual mean=0.000011 rms=0.001075 Jy/beam
! Combined flux in latest and established models = 0.311812 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 84 components and 0.311812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.117405Jy  sigma=0.941399
! Fit after  self-cal, rms=0.117403Jy  sigma=0.941351
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.117403Jy  sigma=0.941351
! Fit after  self-cal, rms=0.115478Jy  sigma=0.908236
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.29 mas, bmaj=8.509 mas, bpa=-9.075 degrees
! Estimated noise=0.473398 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000991721 Jy
! Component: 100  -  total flux cleaned = 0.00125445 Jy
! Component: 150  -  total flux cleaned = 0.00138858 Jy
! Component: 200  -  total flux cleaned = 0.00147688 Jy
! Total flux subtracted in 200 components = 0.00147688 Jy
! Clean residual min=-0.002315 max=0.003148 Jy/beam
! Clean residual mean=0.000011 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.313289 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 94 components and 0.313289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.115435Jy  sigma=0.907843
! Fit after  self-cal, rms=0.115508Jy  sigma=0.907668
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.5, -0.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00300799 Jy
! Component: 100  -  total flux cleaned = 0.00415449 Jy
! Component: 150  -  total flux cleaned = 0.00433842 Jy
! Component: 200  -  total flux cleaned = 0.00433589 Jy
! Total flux subtracted in 200 components = 0.00433589 Jy
! Clean residual min=-0.002146 max=0.002304 Jy/beam
! Clean residual mean=0.000007 rms=0.000584 Jy/beam
! Combined flux in latest and established models = 0.317625 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 125 components and 0.317625 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.115481Jy  sigma=0.905375
! Fit after  self-cal, rms=0.115433Jy  sigma=0.905143
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.115433Jy  sigma=0.905143
! Fit after  self-cal, rms=0.114971Jy  sigma=0.904576
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.295 mas, bmaj=12.37 mas, bpa=-5.674 degrees
! Estimated noise=0.576071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00252828 Jy
! Component: 100  -  total flux cleaned = 0.00321485 Jy
! Component: 150  -  total flux cleaned = 0.00353487 Jy
! Component: 200  -  total flux cleaned = 0.00381202 Jy
! Total flux subtracted in 200 components = 0.00381202 Jy
! Clean residual min=-0.002422 max=0.002923 Jy/beam
! Clean residual mean=0.000012 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.321437 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 154 components and 0.321437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.114981Jy  sigma=0.903902
! Fit after  self-cal, rms=0.114990Jy  sigma=0.903758
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.15417e-05 Jy
! Component: 100  -  total flux cleaned = 0.000238472 Jy
! Component: 150  -  total flux cleaned = 0.000449441 Jy
! Component: 200  -  total flux cleaned = 0.000546132 Jy
! Total flux subtracted in 200 components = 0.000546132 Jy
! Clean residual min=-0.002451 max=0.002969 Jy/beam
! Clean residual mean=0.000011 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.321983 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 167 components and 0.321983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.114978Jy  sigma=0.903731
! Fit after  self-cal, rms=0.114972Jy  sigma=0.903636
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.284 mas, bmaj=8.497 mas, bpa=-9.093 degrees
! Estimated noise=0.472721 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.284 x 8.497 at -9.093 degrees (North through East)
! Clean map  min=-0.0020121  max=0.24202 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.719 mas, bmaj=7.693 mas, bpa=-9.673 degrees
! Estimated noise=0.678652 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.180886 Jy
! Component: 100  -  total flux cleaned = 0.23784 Jy
! Component: 150  -  total flux cleaned = 0.264688 Jy
! Component: 200  -  total flux cleaned = 0.280256 Jy
! Total flux subtracted in 200 components = 0.280256 Jy
! Clean residual min=-0.004800 max=0.008253 Jy/beam
! Clean residual mean=0.000023 rms=0.001156 Jy/beam
! Combined flux in latest and established models = 0.280256 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.280256 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.284 mas, bmaj=8.497 mas, bpa=-9.093 degrees
! Estimated noise=0.472721 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139169 Jy
! Component: 100  -  total flux cleaned = 0.0221519 Jy
! Component: 150  -  total flux cleaned = 0.0272764 Jy
! Component: 200  -  total flux cleaned = 0.0307582 Jy
! Total flux subtracted in 200 components = 0.0307582 Jy
! Clean residual min=-0.002455 max=0.002199 Jy/beam
! Clean residual mean=0.000016 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.311014 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 68 components and 0.311014 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.295 mas, bmaj=12.37 mas, bpa=-5.674 degrees
! Estimated noise=0.576071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00419872 Jy
! Component: 100  -  total flux cleaned = 0.00671059 Jy
! Component: 150  -  total flux cleaned = 0.00830209 Jy
! Component: 200  -  total flux cleaned = 0.00936092 Jy
! Total flux subtracted in 200 components = 0.00936092 Jy
! Clean residual min=-0.002473 max=0.002813 Jy/beam
! Clean residual mean=0.000014 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.320375 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000733383 Jy
! Component: 100  -  total flux cleaned = 0.00125416 Jy
! Component: 150  -  total flux cleaned = 0.00149112 Jy
! Component: 200  -  total flux cleaned = 0.0016087 Jy
! Total flux subtracted in 200 components = 0.0016087 Jy
! Clean residual min=-0.002460 max=0.002856 Jy/beam
! Clean residual mean=0.000011 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.321984 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 137 components and 0.321984 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.284 mas, bmaj=8.497 mas, bpa=-9.093 degrees
! Estimated noise=0.472721 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000217855 Jy
! Component: 100  -  total flux cleaned = -4.05816e-05 Jy
! Component: 150  -  total flux cleaned = -6.77754e-05 Jy
! Component: 200  -  total flux cleaned = -9.14375e-05 Jy
! Total flux subtracted in 200 components = -9.14375e-05 Jy
! Clean residual min=-0.002000 max=0.002060 Jy/beam
! Clean residual mean=0.000006 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.321893 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 152 components and 0.321893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.114921Jy  sigma=0.903298
! Fit after  self-cal, rms=0.114940Jy  sigma=0.903148
wmodel J2300+0337_S_map.mod
! Writing 152 model components to file: J2300+0337_S_map.mod
wobs   J2300+0337_S_uvs.fits
! Writing UV FITS file: J2300+0337_S_uvs.fits
wwins  J2300+0337_S_map.win
! wwins: Wrote 2 windows to J2300+0337_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000196149 Jy
! Component: 100  -  total flux cleaned = 0.000161958 Jy
! Component: 150  -  total flux cleaned = 6.56361e-05 Jy
! Component: 200  -  total flux cleaned = 0.000250894 Jy
! Component: 250  -  total flux cleaned = 0.000428998 Jy
! Component: 300  -  total flux cleaned = 0.000629877 Jy
! Component: 350  -  total flux cleaned = 0.000851741 Jy
! Component: 400  -  total flux cleaned = 0.000960236 Jy
! Component: 450  -  total flux cleaned = 0.00103922 Jy
! Component: 500  -  total flux cleaned = 0.00114137 Jy
! Component: 550  -  total flux cleaned = 0.0011164 Jy
! Component: 600  -  total flux cleaned = 0.00123941 Jy
! Component: 650  -  total flux cleaned = 0.00119121 Jy
! Component: 700  -  total flux cleaned = 0.00119165 Jy
! Component: 750  -  total flux cleaned = 0.00121502 Jy
! Component: 800  -  total flux cleaned = 0.00114586 Jy
! Component: 850  -  total flux cleaned = 0.00107796 Jy
! Component: 900  -  total flux cleaned = 0.00110019 Jy
! Component: 950  -  total flux cleaned = 0.0010558 Jy
! Component: 1000  -  total flux cleaned = 0.00105543 Jy
! Component: 1050  -  total flux cleaned = 0.000990761 Jy
! Component: 1100  -  total flux cleaned = 0.000948731 Jy
! Component: 1150  -  total flux cleaned = 0.000970212 Jy
! Component: 1200  -  total flux cleaned = 0.000949411 Jy
! Component: 1250  -  total flux cleaned = 0.000969651 Jy
! Component: 1300  -  total flux cleaned = 0.000867626 Jy
! Component: 1350  -  total flux cleaned = 0.000888028 Jy
! Component: 1400  -  total flux cleaned = 0.000828171 Jy
! Component: 1450  -  total flux cleaned = 0.000847421 Jy
! Component: 1500  -  total flux cleaned = 0.000769348 Jy
! Component: 1550  -  total flux cleaned = 0.000730816 Jy
! Component: 1600  -  total flux cleaned = 0.000692723 Jy
! Component: 1650  -  total flux cleaned = 0.000806784 Jy
! Component: 1700  -  total flux cleaned = 0.000750164 Jy
! Component: 1750  -  total flux cleaned = 0.000769015 Jy
! Component: 1800  -  total flux cleaned = 0.000768923 Jy
! Component: 1850  -  total flux cleaned = 0.00075057 Jy
! Component: 1900  -  total flux cleaned = 0.000823209 Jy
! Component: 1950  -  total flux cleaned = 0.000732672 Jy
! Component: 2000  -  total flux cleaned = 0.000786464 Jy
! Component: 2050  -  total flux cleaned = 0.000768551 Jy
! Component: 2100  -  total flux cleaned = 0.000803936 Jy
! Component: 2150  -  total flux cleaned = 0.00076858 Jy
! Component: 2200  -  total flux cleaned = 0.000751084 Jy
! Component: 2250  -  total flux cleaned = 0.000820288 Jy
! Component: 2300  -  total flux cleaned = 0.000768793 Jy
! Component: 2350  -  total flux cleaned = 0.000785834 Jy
! Component: 2400  -  total flux cleaned = 0.000802965 Jy
! Component: 2450  -  total flux cleaned = 0.000786074 Jy
! Component: 2500  -  total flux cleaned = 0.000802998 Jy
! Component: 2550  -  total flux cleaned = 0.000819767 Jy
! Component: 2600  -  total flux cleaned = 0.000852964 Jy
! Component: 2650  -  total flux cleaned = 0.000885712 Jy
! Component: 2700  -  total flux cleaned = 0.00080375 Jy
! Component: 2750  -  total flux cleaned = 0.000820054 Jy
! Component: 2800  -  total flux cleaned = 0.000852432 Jy
! Component: 2850  -  total flux cleaned = 0.00083645 Jy
! Component: 2900  -  total flux cleaned = 0.000804427 Jy
! Component: 2950  -  total flux cleaned = 0.000883791 Jy
! Component: 3000  -  total flux cleaned = 0.000852169 Jy
! Component: 3050  -  total flux cleaned = 0.000805052 Jy
! Component: 3100  -  total flux cleaned = 0.00082077 Jy
! Component: 3150  -  total flux cleaned = 0.000774298 Jy
! Component: 3200  -  total flux cleaned = 0.000820596 Jy
! Component: 3250  -  total flux cleaned = 0.000789968 Jy
! Component: 3300  -  total flux cleaned = 0.000820368 Jy
! Component: 3350  -  total flux cleaned = 0.000805186 Jy
! Component: 3400  -  total flux cleaned = 0.000820326 Jy
! Component: 3450  -  total flux cleaned = 0.000835346 Jy
! Component: 3500  -  total flux cleaned = 0.000865194 Jy
! Component: 3550  -  total flux cleaned = 0.000850368 Jy
! Component: 3600  -  total flux cleaned = 0.000850346 Jy
! Component: 3650  -  total flux cleaned = 0.000850252 Jy
! Component: 3700  -  total flux cleaned = 0.000835543 Jy
! Component: 3750  -  total flux cleaned = 0.000893885 Jy
! Component: 3800  -  total flux cleaned = 0.0008794 Jy
! Component: 3850  -  total flux cleaned = 0.000893749 Jy
! Component: 3900  -  total flux cleaned = 0.000936849 Jy
! Component: 3950  -  total flux cleaned = 0.000893948 Jy
! Component: 4000  -  total flux cleaned = 0.00090811 Jy
! Component: 4050  -  total flux cleaned = 0.000908069 Jy
! Total flux subtracted in 4096 components = 0.00090806 Jy
! Clean residual min=-0.000887 max=0.000910 Jy/beam
! Clean residual mean=0.000002 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.322801 Jy
keep
! Adding 328 model components to the UV plane model.
! The established model now contains 480 components and 0.3228 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   J2300+0337_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.284 x 8.497 at -9.093 degrees (North through East)
! Clean map  min=-0.0015031  max=0.24253 Jy/beam
! Writing clean map to FITS file: J2300+0337_S_map.fits
wmodel J2300+0337_S_map.mod
! Writing 480 model components to file: J2300+0337_S_map.mod
wobs   J2300+0337_S_uvs.fits
! Writing UV FITS file: J2300+0337_S_uvs.fits
wwins  J2300+0337_S_map.win
! wwins: Wrote 3 windows to J2300+0337_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.242529 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000279096 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.345232 0.345232 0.690464 1.38093 2.76186 5.52371 11.0474 22.0949 44.1897 88.3794
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.242 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  868.98 
quit
! Quitting program
! Log file J2300+0337_S_dfm.log closed on Fri Feb 15 19:58:49 2019