! Started logfile: /vlbi/bp222/maps//J2131-1207_S_dfm.log on Mon Jan 14 17:20:25 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/bp222/maps//J2131-1207_S_uva.fits
! Reading UV FITS file: /vlbi/bp222/maps//J2131-1207_S_uva.fits
! AN table 1: 14 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J2131-1207
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 840 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2131-1207_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
!  A total of 84 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.114134Jy  sigma=24.258757
! Fit after  self-cal, rms=0.831713Jy  sigma=9.045283
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.277 mas, bmaj=18.36 mas, bpa=-18.14 degrees
! Estimated noise=2.78193 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.34462 Jy
! Component: 100  -  total flux cleaned = 1.66637 Jy
! Total flux subtracted in 100 components = 1.66637 Jy
! Clean residual min=-0.090765 max=0.141828 Jy/beam
! Clean residual mean=-0.001472 rms=0.043929 Jy/beam
! Combined flux in latest and established models = 1.66637 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 1.66637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.319958Jy  sigma=3.361815
! Fit after  self-cal, rms=0.319595Jy  sigma=3.355148
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.036 mas, bmaj=17.72 mas, bpa=-18.4 degrees
! Estimated noise=2.52723 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.196456 Jy
! Component: 100  -  total flux cleaned = 0.316114 Jy
! Component: 150  -  total flux cleaned = 0.391168 Jy
! Component: 200  -  total flux cleaned = 0.419378 Jy
! Total flux subtracted in 200 components = 0.419378 Jy
! Clean residual min=-0.027559 max=0.027537 Jy/beam
! Clean residual mean=-0.000239 rms=0.011321 Jy/beam
! Combined flux in latest and established models = 2.08575 Jy
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 89 components and 2.08575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115428Jy  sigma=1.198560
! Fit after  self-cal, rms=0.115159Jy  sigma=1.195240
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.036 x 17.72 at -18.4 degrees (North through East)
! Clean map  min=-0.032393  max=1.7042 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     LA        0.99     NL        1.00     
!   OV        1.01     PT        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     LA        0.98     NL        1.04     
!   OV        1.01     PT        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     LA        0.98     NL        1.00     
!   OV        1.01     PT        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    LA        0.00*    NL        0.00*    
!   OV        0.00*    PT        0.00*    
! 
! 
! Fit before self-cal, rms=0.115159Jy  sigma=1.195240
! Fit after  self-cal, rms=0.093830Jy  sigma=0.991991
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.116 mas, bmaj=17.75 mas, bpa=-18.61 degrees
! Estimated noise=2.49808 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00248831 Jy
! Component: 100  -  total flux cleaned = -0.00363978 Jy
! Component: 150  -  total flux cleaned = -0.00445733 Jy
! Component: 200  -  total flux cleaned = -0.00574496 Jy
! Total flux subtracted in 200 components = -0.00574496 Jy
! Clean residual min=-0.005007 max=0.004980 Jy/beam
! Clean residual mean=0.000028 rms=0.002017 Jy/beam
! Combined flux in latest and established models = 2.08001 Jy
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 177 components and 2.08001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087170Jy  sigma=0.922071
! Fit after  self-cal, rms=0.087085Jy  sigma=0.921527
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087085Jy  sigma=0.921527
! Fit after  self-cal, rms=0.086798Jy  sigma=0.919380
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.111 mas, bmaj=17.76 mas, bpa=-18.63 degrees
! Estimated noise=2.49689 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101258 Jy
! Component: 100  -  total flux cleaned = 0.00298856 Jy
! Component: 150  -  total flux cleaned = 0.00369638 Jy
! Component: 200  -  total flux cleaned = 0.00417537 Jy
! Total flux subtracted in 200 components = 0.00417537 Jy
! Clean residual min=-0.001912 max=0.001906 Jy/beam
! Clean residual mean=0.000016 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 2.08418 Jy
selfcal
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 239 components and 2.08418 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086112Jy  sigma=0.912798
! Fit after  self-cal, rms=0.086092Jy  sigma=0.912713
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.27547e-05 Jy
! Component: 100  -  total flux cleaned = -0.000101763 Jy
! Component: 150  -  total flux cleaned = -0.000260146 Jy
! Component: 200  -  total flux cleaned = -0.000255507 Jy
! Total flux subtracted in 200 components = -0.000255507 Jy
! Clean residual min=-0.001187 max=0.001181 Jy/beam
! Clean residual mean=0.000013 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 2.08393 Jy
! Performing phase self-cal
! Adding 79 model components to the UV plane model.
! The established model now contains 314 components and 2.08393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085911Jy  sigma=0.911062
! Fit after  self-cal, rms=0.085905Jy  sigma=0.911032
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085905Jy  sigma=0.911032
! Fit after  self-cal, rms=0.085853Jy  sigma=0.910856
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.111 mas, bmaj=17.76 mas, bpa=-18.63 degrees
! Estimated noise=2.49679 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00028116 Jy
! Component: 100  -  total flux cleaned = 0.00014295 Jy
! Component: 150  -  total flux cleaned = -5.13682e-05 Jy
! Component: 200  -  total flux cleaned = 7.27505e-05 Jy
! Total flux subtracted in 200 components = 7.27505e-05 Jy
! Clean residual min=-0.001018 max=0.001025 Jy/beam
! Clean residual mean=0.000010 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 2.084 Jy
selfcal
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 371 components and 2.084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085735Jy  sigma=0.909889
! Fit after  self-cal, rms=0.085734Jy  sigma=0.909880
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000854119 Jy
! Component: 100  -  total flux cleaned = 0.00102877 Jy
! Component: 150  -  total flux cleaned = 0.00136688 Jy
! Component: 200  -  total flux cleaned = 0.00164297 Jy
! Total flux subtracted in 200 components = 0.00164297 Jy
! Clean residual min=-0.000903 max=0.000908 Jy/beam
! Clean residual mean=0.000008 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 2.08564 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 414 components and 2.08564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085655Jy  sigma=0.909077
! Fit after  self-cal, rms=0.085654Jy  sigma=0.909072
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085654Jy  sigma=0.909072
! Fit after  self-cal, rms=0.085610Jy  sigma=0.908992
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.42 mas, bmaj=17.57 mas, bpa=-18.78 degrees
! Estimated noise=2.57429 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00034899 Jy
! Component: 100  -  total flux cleaned = 0.000524197 Jy
! Component: 150  -  total flux cleaned = 0.000862061 Jy
! Component: 200  -  total flux cleaned = 0.00108308 Jy
! Total flux subtracted in 200 components = 0.00108308 Jy
! Clean residual min=-0.000915 max=0.000911 Jy/beam
! Clean residual mean=0.000008 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 2.08673 Jy
selfcal
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 460 components and 2.08673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085522Jy  sigma=0.908330
! Fit after  self-cal, rms=0.085522Jy  sigma=0.908322
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.0003e-05 Jy
! Component: 100  -  total flux cleaned = 0.000131685 Jy
! Component: 150  -  total flux cleaned = 2.69369e-05 Jy
! Component: 200  -  total flux cleaned = 2.64866e-05 Jy
! Total flux subtracted in 200 components = 2.64866e-05 Jy
! Clean residual min=-0.000871 max=0.000868 Jy/beam
! Clean residual mean=0.000006 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 2.08675 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 498 components and 2.08675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085459Jy  sigma=0.907718
! Fit after  self-cal, rms=0.085461Jy  sigma=0.907710
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.112 mas, bmaj=17.76 mas, bpa=-18.63 degrees
! Estimated noise=2.4964 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.112 x 17.76 at -18.63 degrees (North through East)
! Clean map  min=-0.0067732  max=1.6802 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085461Jy  sigma=0.907710
! Fit after  self-cal, rms=0.058334Jy  sigma=0.601888
! Inverting map and beam 
! Estimated beam: bmin=9.112 mas, bmaj=17.76 mas, bpa=-18.63 degrees
! Estimated noise=2.49655 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000696482 Jy
! Component: 100  -  total flux cleaned = 0.000838177 Jy
! Component: 150  -  total flux cleaned = 0.000772962 Jy
! Component: 200  -  total flux cleaned = 0.000546735 Jy
! Total flux subtracted in 200 components = 0.000546735 Jy
! Clean residual min=-0.000536 max=0.000524 Jy/beam
! Clean residual mean=0.000002 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 2.0873 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 551 components and 2.0873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058283Jy  sigma=0.601491
! Fit after  self-cal, rms=0.058284Jy  sigma=0.601483
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000181641 Jy
! Component: 100  -  total flux cleaned = 0.000394195 Jy
! Component: 150  -  total flux cleaned = 0.000627892 Jy
! Component: 200  -  total flux cleaned = 0.000858516 Jy
! Total flux subtracted in 200 components = 0.000858516 Jy
! Clean residual min=-0.000475 max=0.000478 Jy/beam
! Clean residual mean=0.000000 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 2.08816 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 600 components and 2.08816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058252Jy  sigma=0.601192
! Fit after  self-cal, rms=0.058253Jy  sigma=0.601188
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058253Jy  sigma=0.601188
! Fit after  self-cal, rms=0.058251Jy  sigma=0.601141
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.343 mas, bmaj=18.38 mas, bpa=-18.32 degrees
! Estimated noise=2.75517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.33163 Jy
! Component: 100  -  total flux cleaned = 1.64509 Jy
! Component: 150  -  total flux cleaned = 1.80399 Jy
! Component: 200  -  total flux cleaned = 1.9057 Jy
! Total flux subtracted in 200 components = 1.9057 Jy
! Clean residual min=-0.038022 max=0.053958 Jy/beam
! Clean residual mean=-0.000471 rms=0.017651 Jy/beam
! Combined flux in latest and established models = 1.9057 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 50 model components to the UV plane model.
! The established model now contains 50 components and 1.9057 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.113 mas, bmaj=17.76 mas, bpa=-18.63 degrees
! Estimated noise=2.49644 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0753177 Jy
! Component: 100  -  total flux cleaned = 0.118412 Jy
! Component: 150  -  total flux cleaned = 0.128226 Jy
! Component: 200  -  total flux cleaned = 0.131775 Jy
! Total flux subtracted in 200 components = 0.131775 Jy
! Clean residual min=-0.012877 max=0.012768 Jy/beam
! Clean residual mean=-0.000027 rms=0.005667 Jy/beam
! Combined flux in latest and established models = 2.03748 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 127 components and 2.03748 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.42 mas, bmaj=17.57 mas, bpa=-18.79 degrees
! Estimated noise=2.57426 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127646 Jy
! Component: 100  -  total flux cleaned = 0.00079288 Jy
! Component: 150  -  total flux cleaned = 0.000407104 Jy
! Component: 200  -  total flux cleaned = 0.000772254 Jy
! Total flux subtracted in 200 components = 0.000772254 Jy
! Clean residual min=-0.005613 max=0.005569 Jy/beam
! Clean residual mean=-0.000012 rms=0.002741 Jy/beam
! Combined flux in latest and established models = 2.03825 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00119555 Jy
! Component: 100  -  total flux cleaned = 0.00362372 Jy
! Component: 150  -  total flux cleaned = 0.00674132 Jy
! Component: 200  -  total flux cleaned = 0.00909143 Jy
! Total flux subtracted in 200 components = 0.00909143 Jy
! Clean residual min=-0.003430 max=0.003396 Jy/beam
! Clean residual mean=-0.000001 rms=0.001511 Jy/beam
! Combined flux in latest and established models = 2.04734 Jy
! Adding 186 model components to the UV plane model.
! The established model now contains 308 components and 2.04734 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.113 mas, bmaj=17.76 mas, bpa=-18.63 degrees
! Estimated noise=2.49644 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00174879 Jy
! Component: 100  -  total flux cleaned = 0.00258617 Jy
! Component: 150  -  total flux cleaned = 0.00349137 Jy
! Component: 200  -  total flux cleaned = 0.00419177 Jy
! Total flux subtracted in 200 components = 0.00419177 Jy
! Clean residual min=-0.001384 max=0.001376 Jy/beam
! Clean residual mean=0.000005 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 2.05153 Jy
selfcal
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 370 components and 2.05153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058690Jy  sigma=0.605049
! Fit after  self-cal, rms=0.058661Jy  sigma=0.604619
wmodel J2131-1207_S_map.mod
! Writing 370 model components to file: J2131-1207_S_map.mod
wobs   J2131-1207_S_uvs.fits
! Writing UV FITS file: J2131-1207_S_uvs.fits
wwins  J2131-1207_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /vlbi/bp222/maps//J2131-1207_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.113 x 17.76 at -18.63 degrees (North through East)
! Clean map  min=-0.0087878  max=1.6816 Jy/beam
! Writing clean map to FITS file: /vlbi/bp222/maps//J2131-1207_S_map.fits
wmodel /vlbi/bp222/maps//J2131-1207_S_map.mod
! Writing 370 model components to file: /vlbi/bp222/maps//J2131-1207_S_map.mod
wobs   /vlbi/bp222/maps//J2131-1207_S_uvs.fits
! Writing UV FITS file: /vlbi/bp222/maps//J2131-1207_S_uvs.fits
wwins  /vlbi/bp222/maps//J2131-1207_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.68159 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000550097 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0981385 0.0981385 0.196277 0.392554 0.785108 1.57022 3.14043 6.28086 12.5617 25.1234 50.2469
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.681 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3056.91 
quit
! Quitting program
! Log file /vlbi/bp222/maps//J2131-1207_S_dfm.log closed on Mon Jan 14 17:20:28 2019