! Started logfile: /vlbi/bp222/temp_maps//J1845-2852_X_dfm.log on Thu Feb 14 23:06:22 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1845-2852_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1845-2852_X_uvm.fits ! AN table 1: 17 integrations on 28 of 28 possible baselines. ! AN table 2: 16 integrations on 10 of 10 possible baselines. ! AN table 3: 63 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.923898 visibilities/baseline/integration-bin. ! Found source: J1845-2852 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 32196 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1845-2852_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 37 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.078766Jy sigma=12.192960 ! Fit after self-cal, rms=0.620121Jy sigma=6.659296 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.636 mas, bmaj=1.686 mas, bpa=-2.385 degrees ! Estimated noise=0.77346 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.301342 Jy ! Component: 100 - total flux cleaned = 0.367733 Jy ! Total flux subtracted in 100 components = 0.367733 Jy ! Clean residual min=-0.009770 max=0.021305 Jy/beam ! Clean residual mean=-0.000042 rms=0.002151 Jy/beam ! Combined flux in latest and established models = 0.367733 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.367733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104004Jy sigma=1.000588 ! Fit after self-cal, rms=0.103996Jy sigma=1.000528 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0220476 Jy ! Component: 100 - total flux cleaned = 0.0334155 Jy ! Total flux subtracted in 100 components = 0.0334155 Jy ! Clean residual min=-0.007623 max=0.011675 Jy/beam ! Clean residual mean=-0.000023 rms=0.001620 Jy/beam ! Combined flux in latest and established models = 0.401148 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 9 components and 0.401148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099142Jy sigma=0.867298 ! Fit after self-cal, rms=0.099141Jy sigma=0.867117 ! Inverting map ! Added new window around map position (0.8, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107723 Jy ! Component: 100 - total flux cleaned = 0.0159287 Jy ! Total flux subtracted in 100 components = 0.0159287 Jy ! Clean residual min=-0.007896 max=0.009916 Jy/beam ! Clean residual mean=-0.000015 rms=0.001513 Jy/beam ! Combined flux in latest and established models = 0.417077 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 17 components and 0.417077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.097387Jy sigma=0.838168 ! Fit after self-cal, rms=0.097309Jy sigma=0.835868 ! Inverting map ! Added new window around map position (-1.2, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00982453 Jy ! Component: 100 - total flux cleaned = 0.015476 Jy ! Total flux subtracted in 100 components = 0.015476 Jy ! Clean residual min=-0.006925 max=0.010193 Jy/beam ! Clean residual mean=-0.000008 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.432553 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 0.432553 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095991Jy sigma=0.821649 ! Fit after self-cal, rms=0.095903Jy sigma=0.819250 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.881 mas, bmaj=2.237 mas, bpa=-2.735 degrees ! Estimated noise=0.391033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.8, 15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00853118 Jy ! Component: 100 - total flux cleaned = 0.0112423 Jy ! Component: 150 - total flux cleaned = 0.0128702 Jy ! Component: 200 - total flux cleaned = 0.0136138 Jy ! Total flux subtracted in 200 components = 0.0136138 Jy ! Clean residual min=-0.005834 max=0.007171 Jy/beam ! Clean residual mean=-0.000012 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.446167 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 51 components and 0.446167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094459Jy sigma=0.808092 ! Fit after self-cal, rms=0.094445Jy sigma=0.807354 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.881 x 2.237 at -2.735 degrees (North through East) ! Clean map min=-0.005514 max=0.39027 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 0.97 KP 1.04 LA 0.99 ! NL 1.23 OV 0.88 PT 0.92 SC 0.84 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.28 KP 1.07 NL 1.04 ! OV 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 HN 1.29 KP 0.96 LA 1.00 ! MK 0.98 NL 0.98 OV 0.98 PT 1.02 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.00 KP 1.03 LA 0.98 ! NL 1.23 OV 0.89 PT 0.93 SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 HN 1.20 KP 1.05 NL 1.04 ! OV 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 HN 1.27 KP 0.95 LA 1.01 ! MK 0.98 NL 0.99 OV 0.99 PT 1.02 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 0.97 KP 1.03 LA 1.01 ! NL 1.22 OV 0.87 PT 0.90 SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 1.25 KP 1.06 NL 1.00 ! OV 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 HN 1.27 KP 0.96 LA 1.01 ! MK 1.00 NL 0.98 OV 0.99 PT 1.02 ! SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 0.95 KP 1.03 LA 1.00 ! NL 1.20 OV 0.86 PT 0.92 SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 1.22 KP 1.06 NL 1.00 ! OV 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 HN 1.27 KP 0.97 LA 1.00 ! MK 0.98 NL 0.98 OV 0.98 PT 1.03 ! SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 0.96 KP 1.04 LA 1.00 ! NL 1.21 OV 0.88 PT 0.94 SC 0.84 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 HN 1.22 KP 1.07 NL 1.05 ! OV 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 HN 1.27 KP 0.97 LA 1.01 ! MK 0.99 NL 0.99 OV 1.00 PT 1.03 ! SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 0.98 KP 1.02 LA 1.02 ! NL 1.23 OV 0.87 PT 0.91 SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 HN 1.19 KP 1.05 NL 1.02 ! OV 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 HN 1.30 KP 0.96 LA 1.01 ! MK 0.99 NL 0.99 OV 0.98 PT 1.03 ! SC 1.01 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 0.95 KP 1.04 LA 1.02 ! NL 1.22 OV 0.87 PT 0.91 SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 HN 1.28 KP 1.04 NL 1.05 ! OV 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 HN 1.30 KP 0.96 LA 1.02 ! MK 1.01 NL 0.98 OV 0.99 PT 1.02 ! SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 HN 0.95 KP 1.04 LA 1.01 ! NL 1.21 OV 0.88 PT 0.91 SC 0.84 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.07 HN 1.24 KP 1.04 NL 1.00 ! OV 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 HN 1.29 KP 0.97 LA 1.02 ! MK 0.99 NL 0.99 OV 0.99 PT 1.03 ! SC 0.99 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! FD 0.94 HN 1.00 KP 1.02 LA 1.02 ! NL 1.20 OV 0.89 PT 0.92 SC 0.86 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.04 HN 1.27 KP 1.06 NL 1.06 ! OV 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 HN 1.29 KP 0.96 LA 1.01 ! MK 1.03 NL 1.00 OV 0.99 PT 1.02 ! SC 1.01 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 0.98 KP 1.02 LA 1.01 ! NL 1.21 OV 0.88 PT 0.91 SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.05 HN 1.19 KP 1.07 NL 1.06 ! OV 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 HN 1.30 KP 0.95 LA 1.02 ! MK 1.01 NL 0.99 OV 0.98 PT 1.02 ! SC 1.01 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 0.96 KP 1.04 LA 1.01 ! NL 1.21 OV 0.87 PT 0.92 SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.06 HN 1.17 KP 1.03 NL 1.00 ! OV 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 HN 1.26 KP 0.97 LA 1.01 ! MK 1.02 NL 1.01 OV 1.00 PT 1.03 ! SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 HN 0.98 KP 1.04 LA 1.00 ! NL 1.22 OV 0.87 PT 0.90 SC 0.84 ! ! Telescope amplitude corrections in sub-array 2: ! FD 1.08 HN 1.24 KP 1.03 NL 1.02 ! OV 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 HN 1.28 KP 0.96 LA 1.01 ! MK 1.02 NL 1.02 OV 0.99 PT 1.03 ! SC 1.01 ! ! ! Fit before self-cal, rms=0.094445Jy sigma=0.807354 ! Fit after self-cal, rms=0.090425Jy sigma=0.743496 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8854 mas, bmaj=2.239 mas, bpa=-2.472 degrees ! Estimated noise=0.392773 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00457707 Jy ! Component: 100 - total flux cleaned = -0.00617133 Jy ! Component: 150 - total flux cleaned = -0.00708255 Jy ! Component: 200 - total flux cleaned = -0.00769477 Jy ! Total flux subtracted in 200 components = -0.00769477 Jy ! Clean residual min=-0.003544 max=0.003978 Jy/beam ! Clean residual mean=0.000003 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.438472 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 73 components and 0.438472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090069Jy sigma=0.739334 ! Fit after self-cal, rms=0.090134Jy sigma=0.738795 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.090134Jy sigma=0.738795 ! Fit after self-cal, rms=0.089871Jy sigma=0.723220 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8866 mas, bmaj=2.241 mas, bpa=-2.492 degrees ! Estimated noise=0.391927 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00298938 Jy ! Component: 100 - total flux cleaned = -0.0038791 Jy ! Component: 150 - total flux cleaned = -0.00445294 Jy ! Component: 200 - total flux cleaned = -0.0047798 Jy ! Total flux subtracted in 200 components = -0.0047798 Jy ! Clean residual min=-0.002559 max=0.002726 Jy/beam ! Clean residual mean=0.000003 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.433692 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 84 components and 0.433692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089748Jy sigma=0.721460 ! Fit after self-cal, rms=0.089745Jy sigma=0.721295 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-18.4, 40.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171957 Jy ! Component: 100 - total flux cleaned = 0.00148395 Jy ! Component: 150 - total flux cleaned = 0.00148254 Jy ! Component: 200 - total flux cleaned = 0.00139367 Jy ! Total flux subtracted in 200 components = 0.00139367 Jy ! Clean residual min=-0.002528 max=0.002429 Jy/beam ! Clean residual mean=0.000003 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.435086 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 101 components and 0.435086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089652Jy sigma=0.720110 ! Fit after self-cal, rms=0.089639Jy sigma=0.719965 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089639Jy sigma=0.719965 ! Fit after self-cal, rms=0.092857Jy sigma=0.712063 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8877 mas, bmaj=2.242 mas, bpa=-2.46 degrees ! Estimated noise=0.391838 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00202996 Jy ! Component: 100 - total flux cleaned = -0.00270934 Jy ! Component: 150 - total flux cleaned = -0.00294281 Jy ! Component: 200 - total flux cleaned = -0.00322971 Jy ! Total flux subtracted in 200 components = -0.00322971 Jy ! Clean residual min=-0.001962 max=0.001269 Jy/beam ! Clean residual mean=0.000003 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.431856 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 109 components and 0.431856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092769Jy sigma=0.711349 ! Fit after self-cal, rms=0.092793Jy sigma=0.711280 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00039252 Jy ! Component: 100 - total flux cleaned = -0.00054203 Jy ! Component: 150 - total flux cleaned = -0.00064347 Jy ! Component: 200 - total flux cleaned = -0.000768527 Jy ! Total flux subtracted in 200 components = -0.000768527 Jy ! Clean residual min=-0.001844 max=0.001302 Jy/beam ! Clean residual mean=0.000002 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.431088 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 116 components and 0.431087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092757Jy sigma=0.711000 ! Fit after self-cal, rms=0.092752Jy sigma=0.710984 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092752Jy sigma=0.710984 ! Fit after self-cal, rms=0.093348Jy sigma=0.710722 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=5.869 mas, bpa=-3.292 degrees ! Estimated noise=0.449512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120672 Jy ! Component: 100 - total flux cleaned = -0.00153796 Jy ! Component: 150 - total flux cleaned = -0.00168833 Jy ! Component: 200 - total flux cleaned = -0.0018197 Jy ! Total flux subtracted in 200 components = -0.0018197 Jy ! Clean residual min=-0.001393 max=0.001231 Jy/beam ! Clean residual mean=0.000005 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.429268 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 128 components and 0.429268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093317Jy sigma=0.710514 ! Fit after self-cal, rms=0.093317Jy sigma=0.710480 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163748 Jy ! Component: 100 - total flux cleaned = -0.000275693 Jy ! Component: 150 - total flux cleaned = -0.000372741 Jy ! Component: 200 - total flux cleaned = -0.000442469 Jy ! Total flux subtracted in 200 components = -0.000442469 Jy ! Clean residual min=-0.001313 max=0.001202 Jy/beam ! Clean residual mean=0.000005 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.428825 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 135 components and 0.428825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093305Jy sigma=0.710447 ! Fit after self-cal, rms=0.093301Jy sigma=0.710426 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.888 mas, bmaj=2.242 mas, bpa=-2.453 degrees ! Estimated noise=0.391614 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.888 x 2.242 at -2.453 degrees (North through East) ! Clean map min=-0.0014124 max=0.39404 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6391 mas, bmaj=1.684 mas, bpa=-2.05 degrees ! Estimated noise=0.779775 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.303727 Jy ! Component: 100 - total flux cleaned = 0.370317 Jy ! Component: 150 - total flux cleaned = 0.391507 Jy ! Component: 200 - total flux cleaned = 0.4026 Jy ! Total flux subtracted in 200 components = 0.4026 Jy ! Clean residual min=-0.003086 max=0.006284 Jy/beam ! Clean residual mean=-0.000012 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.4026 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.4026 Jy ! Inverting map and beam ! Estimated beam: bmin=0.888 mas, bmaj=2.242 mas, bpa=-2.453 degrees ! Estimated noise=0.391614 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111041 Jy ! Component: 100 - total flux cleaned = 0.0166661 Jy ! Component: 150 - total flux cleaned = 0.0198278 Jy ! Component: 200 - total flux cleaned = 0.0219331 Jy ! Total flux subtracted in 200 components = 0.0219331 Jy ! Clean residual min=-0.001419 max=0.002298 Jy/beam ! Clean residual mean=-0.000004 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.424533 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 39 components and 0.424534 Jy ! Inverting map ! Added new window around map position (-1.4, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182182 Jy ! Component: 100 - total flux cleaned = 0.00239094 Jy ! Component: 150 - total flux cleaned = 0.00277975 Jy ! Component: 200 - total flux cleaned = 0.00300924 Jy ! Total flux subtracted in 200 components = 0.00300924 Jy ! Clean residual min=-0.001299 max=0.001449 Jy/beam ! Clean residual mean=0.000001 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.427543 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.427543 Jy ! Inverting map ! Added new window around map position (-11.8, 33.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000977885 Jy ! Component: 100 - total flux cleaned = 0.00118131 Jy ! Component: 150 - total flux cleaned = 0.00124423 Jy ! Component: 200 - total flux cleaned = 0.00127347 Jy ! Total flux subtracted in 200 components = 0.00127347 Jy ! Clean residual min=-0.001231 max=0.001226 Jy/beam ! Clean residual mean=0.000001 rms=0.000289 Jy/beam ! Combined flux in latest and established models = 0.428816 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 68 components and 0.428816 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.33 mas, bmaj=5.869 mas, bpa=-3.292 degrees ! Estimated noise=0.449512 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224321 Jy ! Component: 100 - total flux cleaned = 0.000243031 Jy ! Component: 150 - total flux cleaned = 0.000272477 Jy ! Component: 200 - total flux cleaned = 0.000300633 Jy ! Total flux subtracted in 200 components = 0.000300633 Jy ! Clean residual min=-0.001186 max=0.001210 Jy/beam ! Clean residual mean=0.000004 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.429117 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.59453e-05 Jy ! Component: 100 - total flux cleaned = 2.64232e-05 Jy ! Component: 150 - total flux cleaned = 2.6566e-05 Jy ! Component: 200 - total flux cleaned = 2.64378e-05 Jy ! Total flux subtracted in 200 components = 2.64378e-05 Jy ! Clean residual min=-0.001167 max=0.001189 Jy/beam ! Clean residual mean=0.000004 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.429143 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 95 components and 0.429143 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.888 mas, bmaj=2.242 mas, bpa=-2.453 degrees ! Estimated noise=0.391614 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000256864 Jy ! Component: 100 - total flux cleaned = -0.00031075 Jy ! Component: 150 - total flux cleaned = -0.000363489 Jy ! Component: 200 - total flux cleaned = -0.000413409 Jy ! Total flux subtracted in 200 components = -0.000413409 Jy ! Clean residual min=-0.001231 max=0.001149 Jy/beam ! Clean residual mean=0.000002 rms=0.000280 Jy/beam ! Combined flux in latest and established models = 0.42873 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 104 components and 0.42873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.093269Jy sigma=0.710018 ! Fit after self-cal, rms=0.093239Jy sigma=0.709856 wmodel J1845-2852_X_map.mod ! Writing 104 model components to file: J1845-2852_X_map.mod wobs J1845-2852_X_uvs.fits ! Writing UV FITS file: J1845-2852_X_uvs.fits wwins J1845-2852_X_map.win ! wwins: Wrote 7 windows to J1845-2852_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.81335e-05 Jy ! Component: 100 - total flux cleaned = -0.000264408 Jy ! Component: 150 - total flux cleaned = -0.000438384 Jy ! Component: 200 - total flux cleaned = -0.000493051 Jy ! Component: 250 - total flux cleaned = -0.000582031 Jy ! Component: 300 - total flux cleaned = -0.000633745 Jy ! Component: 350 - total flux cleaned = -0.000718356 Jy ! Component: 400 - total flux cleaned = -0.000801547 Jy ! Component: 450 - total flux cleaned = -0.000866926 Jy ! Component: 500 - total flux cleaned = -0.000947402 Jy ! Component: 550 - total flux cleaned = -0.00097879 Jy ! Component: 600 - total flux cleaned = -0.00104115 Jy ! Component: 650 - total flux cleaned = -0.00102556 Jy ! Component: 700 - total flux cleaned = -0.00102549 Jy ! Component: 750 - total flux cleaned = -0.00102544 Jy ! Component: 800 - total flux cleaned = -0.00104027 Jy ! Component: 850 - total flux cleaned = -0.000981222 Jy ! Component: 900 - total flux cleaned = -0.000922995 Jy ! Component: 950 - total flux cleaned = -0.000850678 Jy ! Component: 1000 - total flux cleaned = -0.000764947 Jy ! Component: 1050 - total flux cleaned = -0.000665744 Jy ! Component: 1100 - total flux cleaned = -0.000595567 Jy ! Component: 1150 - total flux cleaned = -0.000581507 Jy ! Component: 1200 - total flux cleaned = -0.000484569 Jy ! Component: 1250 - total flux cleaned = -0.000416316 Jy ! Component: 1300 - total flux cleaned = -0.00037567 Jy ! Component: 1350 - total flux cleaned = -0.000321829 Jy ! Component: 1400 - total flux cleaned = -0.000241944 Jy ! Component: 1450 - total flux cleaned = -0.000188885 Jy ! Component: 1500 - total flux cleaned = -0.000162528 Jy ! Component: 1550 - total flux cleaned = -4.5326e-05 Jy ! Component: 1600 - total flux cleaned = -4.52546e-05 Jy ! Component: 1650 - total flux cleaned = 8.31057e-05 Jy ! Component: 1700 - total flux cleaned = 0.00013392 Jy ! Component: 1750 - total flux cleaned = 0.000184417 Jy ! Component: 1800 - total flux cleaned = 0.000209436 Jy ! Component: 1850 - total flux cleaned = 0.000272012 Jy ! Component: 1900 - total flux cleaned = 0.000296794 Jy ! Component: 1950 - total flux cleaned = 0.000358482 Jy ! Component: 2000 - total flux cleaned = 0.000358502 Jy ! Component: 2050 - total flux cleaned = 0.000492313 Jy ! Component: 2100 - total flux cleaned = 0.000443993 Jy ! Component: 2150 - total flux cleaned = 0.000492089 Jy ! Component: 2200 - total flux cleaned = 0.000527938 Jy ! Component: 2250 - total flux cleaned = 0.000539829 Jy ! Component: 2300 - total flux cleaned = 0.000528155 Jy ! Component: 2350 - total flux cleaned = 0.000539941 Jy ! Component: 2400 - total flux cleaned = 0.000551654 Jy ! Component: 2450 - total flux cleaned = 0.000551656 Jy ! Component: 2500 - total flux cleaned = 0.000563229 Jy ! Component: 2550 - total flux cleaned = 0.0005631 Jy ! Component: 2600 - total flux cleaned = 0.000505843 Jy ! Component: 2650 - total flux cleaned = 0.000494502 Jy ! Component: 2700 - total flux cleaned = 0.000505782 Jy ! Component: 2750 - total flux cleaned = 0.000494543 Jy ! Component: 2800 - total flux cleaned = 0.000449762 Jy ! Component: 2850 - total flux cleaned = 0.000505485 Jy ! Component: 2900 - total flux cleaned = 0.000438777 Jy ! Component: 2950 - total flux cleaned = 0.000460845 Jy ! Component: 3000 - total flux cleaned = 0.000405935 Jy ! Component: 3050 - total flux cleaned = 0.000394997 Jy ! Component: 3100 - total flux cleaned = 0.000373229 Jy ! Component: 3150 - total flux cleaned = 0.000416604 Jy ! Component: 3200 - total flux cleaned = 0.000405815 Jy ! Component: 3250 - total flux cleaned = 0.000395057 Jy ! Component: 3300 - total flux cleaned = 0.000362917 Jy ! Component: 3350 - total flux cleaned = 0.000341629 Jy ! Component: 3400 - total flux cleaned = 0.000320492 Jy ! Component: 3450 - total flux cleaned = 0.000299536 Jy ! Component: 3500 - total flux cleaned = 0.000299602 Jy ! Component: 3550 - total flux cleaned = 0.000341463 Jy ! Component: 3600 - total flux cleaned = 0.000278951 Jy ! Component: 3650 - total flux cleaned = 0.000299702 Jy ! Component: 3700 - total flux cleaned = 0.000320386 Jy ! Component: 3750 - total flux cleaned = 0.000268904 Jy ! Component: 3800 - total flux cleaned = 0.000238151 Jy ! Component: 3850 - total flux cleaned = 0.000227908 Jy ! Component: 3900 - total flux cleaned = 0.000187167 Jy ! Component: 3950 - total flux cleaned = 0.00016697 Jy ! Component: 4000 - total flux cleaned = 0.000227461 Jy ! Component: 4050 - total flux cleaned = 0.000157075 Jy ! Total flux subtracted in 4096 components = 0.000147065 Jy ! Clean residual min=-0.000572 max=0.000587 Jy/beam ! Clean residual mean=0.000000 rms=0.000174 Jy/beam ! Combined flux in latest and established models = 0.428877 Jy keep ! Adding 311 model components to the UV plane model. ! The established model now contains 415 components and 0.428877 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1845-2852_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.888 x 2.242 at -2.453 degrees (North through East) ! Clean map min=-0.0011256 max=0.39533 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1845-2852_X_map.fits wmodel /vlbi/bp222/temp_maps//J1845-2852_X_map.mod ! Writing 415 model components to file: /vlbi/bp222/temp_maps//J1845-2852_X_map.mod wobs /vlbi/bp222/temp_maps//J1845-2852_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1845-2852_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1845-2852_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/temp_maps//J1845-2852_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.395329 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000174324 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.132288 0.132288 0.264576 0.529151 1.0583 2.1166 4.23321 8.46642 16.9328 33.8657 67.7313 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.395 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2267.78 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1845-2852_X_dfm.log closed on Thu Feb 14 23:06:28 2019