! Started logfile: /vlbi/bp222/temp_maps//J1803+0341_X_dfm.log on Thu Feb 14 23:05:41 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1803+0341_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1803+0341_X_uvm.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! AN table 2: 23 integrations on 21 of 21 possible baselines. ! AN table 3: 92 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.970595 visibilities/baseline/integration-bin. ! Found source: J1803+0341 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 54264 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1803+0341_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 2 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 14 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.011790Jy sigma=15.251912 ! Fit after self-cal, rms=0.865044Jy sigma=12.989534 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6468 mas, bmaj=1.733 mas, bpa=-3.452 degrees ! Estimated noise=0.405046 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105395 Jy ! Component: 100 - total flux cleaned = 0.128579 Jy ! Total flux subtracted in 100 components = 0.128579 Jy ! Clean residual min=-0.003660 max=0.007340 Jy/beam ! Clean residual mean=-0.000001 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.128579 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.128579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064964Jy sigma=0.860139 ! Fit after self-cal, rms=0.064957Jy sigma=0.860075 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00771101 Jy ! Component: 100 - total flux cleaned = 0.0121646 Jy ! Total flux subtracted in 100 components = 0.0121646 Jy ! Clean residual min=-0.002524 max=0.002550 Jy/beam ! Clean residual mean=0.000000 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.140743 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 22 components and 0.140743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063829Jy sigma=0.835846 ! Fit after self-cal, rms=0.063849Jy sigma=0.835768 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8321 mas, bmaj=2.042 mas, bpa=-4.603 degrees ! Estimated noise=0.213827 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00404547 Jy ! Component: 100 - total flux cleaned = 0.00616656 Jy ! Component: 150 - total flux cleaned = 0.00733457 Jy ! Component: 200 - total flux cleaned = 0.00799743 Jy ! Total flux subtracted in 200 components = 0.00799743 Jy ! Clean residual min=-0.002091 max=0.002411 Jy/beam ! Clean residual mean=0.000003 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.148741 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 32 components and 0.148741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063644Jy sigma=0.830952 ! Fit after self-cal, rms=0.063658Jy sigma=0.830886 ! Inverting map ! Added new window around map position (0.4, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218207 Jy ! Component: 100 - total flux cleaned = 0.00322499 Jy ! Component: 150 - total flux cleaned = 0.00375133 Jy ! Component: 200 - total flux cleaned = 0.00406372 Jy ! Total flux subtracted in 200 components = 0.00406372 Jy ! Clean residual min=-0.001979 max=0.001929 Jy/beam ! Clean residual mean=0.000002 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.152804 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 51 components and 0.152804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063581Jy sigma=0.829382 ! Fit after self-cal, rms=0.063574Jy sigma=0.829294 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8321 x 2.042 at -4.603 degrees (North through East) ! Clean map min=-0.0018719 max=0.13769 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.05 HN 0.94 KP 1.08 ! LA 1.03 MK 1.08 NL 1.25 PT 0.99 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.01 HN 0.98 KP 0.99 ! MK 0.94 NL 0.87 OV 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 HN 1.07 KP 0.99 LA 1.00 ! MK 0.98 NL 0.95 OV 1.02 PT 0.98 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.02 HN 0.95 KP 1.12 ! LA 1.02 MK 1.11 NL 1.23 PT 0.98 ! SC 0.88 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.97 HN 1.04 KP 1.00 ! MK 0.96 NL 0.88 OV 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 HN 1.05 KP 0.96 LA 1.02 ! MK 0.99 NL 0.96 OV 1.03 PT 0.99 ! SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.07 HN 0.94 KP 1.07 ! LA 1.04 MK 1.07 NL 1.23 PT 0.95 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.97 HN 0.97 KP 0.99 ! MK 1.01 NL 0.88 OV 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 1.03 KP 0.97 LA 1.00 ! MK 0.99 NL 0.95 OV 1.02 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.07 HN 0.92 KP 1.10 ! LA 1.02 MK 1.14 NL 1.19 PT 0.98 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.95 HN 0.99 KP 0.98 ! MK 0.98 NL 0.91 OV 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 1.05 KP 0.99 LA 0.98 ! MK 0.99 NL 0.97 OV 0.99 PT 1.01 ! SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.97 HN 0.95 KP 1.08 ! LA 1.09 MK 1.10 NL 1.25 PT 0.95 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.98 HN 0.97 KP 0.98 ! MK 0.94 NL 0.84 OV 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 1.05 KP 0.99 LA 1.00 ! MK 0.99 NL 0.96 OV 0.98 PT 1.00 ! SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.04 HN 0.90 KP 1.09 ! LA 1.02 MK 1.14 NL 1.21 PT 0.96 ! SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 1.00 HN 0.99 KP 1.00 ! MK 1.02 NL 0.84 OV 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 1.05 KP 0.98 LA 0.98 ! MK 1.00 NL 0.98 OV 1.00 PT 1.00 ! SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.05 HN 0.92 KP 1.10 ! LA 1.03 MK 1.15 NL 1.26 PT 0.94 ! SC 0.91 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.96 HN 1.02 KP 0.94 ! MK 0.98 NL 0.85 OV 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 1.07 KP 1.00 LA 1.00 ! MK 1.00 NL 0.96 OV 0.99 PT 0.99 ! SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.02 HN 0.93 KP 1.10 ! LA 1.05 MK 1.12 NL 1.25 PT 0.89 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.97 HN 0.99 KP 0.97 ! MK 0.95 NL 0.83 OV 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 1.04 KP 0.96 LA 0.98 ! MK 1.01 NL 0.98 OV 1.02 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.06 HN 0.91 KP 1.10 ! LA 1.02 MK 1.12 NL 1.21 PT 0.92 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 0.94 KP 0.96 ! MK 0.97 NL 0.84 OV 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 1.03 KP 0.99 LA 0.97 ! MK 1.03 NL 0.96 OV 1.00 PT 1.00 ! SC 1.03 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.06 HN 0.91 KP 1.08 ! LA 1.05 MK 1.05 NL 1.25 PT 0.94 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.94 HN 0.96 KP 0.99 ! MK 0.96 NL 0.83 OV 0.94 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 HN 1.08 KP 0.96 LA 1.00 ! MK 1.03 NL 0.95 OV 1.00 PT 0.99 ! SC 1.02 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.92 KP 1.11 ! LA 1.06 MK 1.01 NL 1.20 PT 0.97 ! SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.99 HN 0.97 KP 0.94 ! MK 1.02 NL 0.87 OV 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 HN 1.02 KP 0.97 LA 0.99 ! MK 1.01 NL 0.96 OV 1.01 PT 0.98 ! SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.06 HN 0.90 KP 1.06 ! LA 1.07 MK 1.10 NL 1.20 PT 0.95 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.98 HN 0.98 KP 0.97 ! MK 0.95 NL 0.87 OV 0.89 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 HN 1.04 KP 0.96 LA 0.99 ! MK 1.02 NL 0.97 OV 1.00 PT 1.00 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.063574Jy sigma=0.829294 ! Fit after self-cal, rms=0.063735Jy sigma=0.812464 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.833 mas, bmaj=2.048 mas, bpa=-4.588 degrees ! Estimated noise=0.214077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, -3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130305 Jy ! Component: 100 - total flux cleaned = 0.00207406 Jy ! Component: 150 - total flux cleaned = 0.00245 Jy ! Component: 200 - total flux cleaned = 0.00268222 Jy ! Total flux subtracted in 200 components = 0.00268222 Jy ! Clean residual min=-0.001026 max=0.000902 Jy/beam ! Clean residual mean=0.000000 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.155487 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 70 components and 0.155487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063702Jy sigma=0.811961 ! Fit after self-cal, rms=0.063751Jy sigma=0.811793 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063751Jy sigma=0.811793 ! Fit after self-cal, rms=0.063691Jy sigma=0.810991 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8324 mas, bmaj=2.046 mas, bpa=-4.622 degrees ! Estimated noise=0.214111 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000730651 Jy ! Component: 100 - total flux cleaned = 0.00100594 Jy ! Component: 150 - total flux cleaned = 0.00111336 Jy ! Component: 200 - total flux cleaned = 0.00118193 Jy ! Total flux subtracted in 200 components = 0.00118193 Jy ! Clean residual min=-0.000974 max=0.000920 Jy/beam ! Clean residual mean=0.000000 rms=0.000206 Jy/beam ! Combined flux in latest and established models = 0.156668 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 84 components and 0.156668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063679Jy sigma=0.810829 ! Fit after self-cal, rms=0.063679Jy sigma=0.810807 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000207153 Jy ! Component: 100 - total flux cleaned = 0.000247575 Jy ! Component: 150 - total flux cleaned = 0.000234754 Jy ! Component: 200 - total flux cleaned = 0.000235 Jy ! Total flux subtracted in 200 components = 0.000235 Jy ! Clean residual min=-0.000948 max=0.000921 Jy/beam ! Clean residual mean=0.000000 rms=0.000204 Jy/beam ! Combined flux in latest and established models = 0.156903 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 92 components and 0.156903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063674Jy sigma=0.810742 ! Fit after self-cal, rms=0.063674Jy sigma=0.810737 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063674Jy sigma=0.810737 ! Fit after self-cal, rms=0.063765Jy sigma=0.806984 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8319 mas, bmaj=2.044 mas, bpa=-4.613 degrees ! Estimated noise=0.214007 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000361687 Jy ! Component: 100 - total flux cleaned = 0.000449414 Jy ! Component: 150 - total flux cleaned = 0.000501233 Jy ! Component: 200 - total flux cleaned = 0.000528934 Jy ! Total flux subtracted in 200 components = 0.000528934 Jy ! Clean residual min=-0.000683 max=0.000716 Jy/beam ! Clean residual mean=0.000000 rms=0.000168 Jy/beam ! Combined flux in latest and established models = 0.157432 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 100 components and 0.157432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063760Jy sigma=0.806924 ! Fit after self-cal, rms=0.063771Jy sigma=0.806887 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.96175e-05 Jy ! Component: 100 - total flux cleaned = 9.81521e-05 Jy ! Component: 150 - total flux cleaned = 9.8256e-05 Jy ! Component: 200 - total flux cleaned = 8.31252e-05 Jy ! Total flux subtracted in 200 components = 8.31252e-05 Jy ! Clean residual min=-0.000686 max=0.000691 Jy/beam ! Clean residual mean=-0.000000 rms=0.000166 Jy/beam ! Combined flux in latest and established models = 0.157516 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 113 components and 0.157516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063768Jy sigma=0.806859 ! Fit after self-cal, rms=0.063769Jy sigma=0.806857 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063769Jy sigma=0.806857 ! Fit after self-cal, rms=0.063761Jy sigma=0.806835 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.995 mas, bmaj=3.218 mas, bpa=-8.18 degrees ! Estimated noise=0.265292 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000251985 Jy ! Component: 100 - total flux cleaned = 0.00023185 Jy ! Component: 150 - total flux cleaned = 0.000205698 Jy ! Component: 200 - total flux cleaned = 0.000166078 Jy ! Total flux subtracted in 200 components = 0.000166078 Jy ! Clean residual min=-0.000737 max=0.000637 Jy/beam ! Clean residual mean=0.000000 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.157682 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 129 components and 0.157682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063760Jy sigma=0.806819 ! Fit after self-cal, rms=0.063759Jy sigma=0.806814 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.97581e-05 Jy ! Component: 100 - total flux cleaned = 2.6718e-05 Jy ! Component: 150 - total flux cleaned = 5.93158e-06 Jy ! Component: 200 - total flux cleaned = -7.04623e-06 Jy ! Total flux subtracted in 200 components = -7.04623e-06 Jy ! Clean residual min=-0.000724 max=0.000621 Jy/beam ! Clean residual mean=0.000000 rms=0.000193 Jy/beam ! Combined flux in latest and established models = 0.157675 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 137 components and 0.157675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063759Jy sigma=0.806810 ! Fit after self-cal, rms=0.063758Jy sigma=0.806806 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8318 mas, bmaj=2.043 mas, bpa=-4.612 degrees ! Estimated noise=0.214052 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8318 x 2.043 at -4.612 degrees (North through East) ! Clean map min=-0.00060641 max=0.13759 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6469 mas, bmaj=1.731 mas, bpa=-3.368 degrees ! Estimated noise=0.403882 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10504 Jy ! Component: 100 - total flux cleaned = 0.128256 Jy ! Component: 150 - total flux cleaned = 0.136074 Jy ! Component: 200 - total flux cleaned = 0.140608 Jy ! Total flux subtracted in 200 components = 0.140608 Jy ! Clean residual min=-0.002040 max=0.002435 Jy/beam ! Clean residual mean=-0.000001 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.140608 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.140608 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8318 mas, bmaj=2.043 mas, bpa=-4.612 degrees ! Estimated noise=0.214052 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453274 Jy ! Component: 100 - total flux cleaned = 0.00730331 Jy ! Component: 150 - total flux cleaned = 0.00924863 Jy ! Component: 200 - total flux cleaned = 0.0107403 Jy ! Total flux subtracted in 200 components = 0.0107403 Jy ! Clean residual min=-0.000939 max=0.000994 Jy/beam ! Clean residual mean=-0.000000 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.151348 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 57 components and 0.151348 Jy ! Inverting map ! Added new window around map position (1.8, -7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00121741 Jy ! Component: 100 - total flux cleaned = 0.00219024 Jy ! Component: 150 - total flux cleaned = 0.00298157 Jy ! Component: 200 - total flux cleaned = 0.00362906 Jy ! Total flux subtracted in 200 components = 0.00362906 Jy ! Clean residual min=-0.000782 max=0.000743 Jy/beam ! Clean residual mean=-0.000000 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.154977 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 74 components and 0.154977 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.995 mas, bmaj=3.218 mas, bpa=-8.18 degrees ! Estimated noise=0.265292 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00080664 Jy ! Component: 100 - total flux cleaned = 0.00129232 Jy ! Component: 150 - total flux cleaned = 0.00158458 Jy ! Component: 200 - total flux cleaned = 0.00182499 Jy ! Total flux subtracted in 200 components = 0.00182499 Jy ! Clean residual min=-0.000754 max=0.000623 Jy/beam ! Clean residual mean=-0.000000 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.156802 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000115492 Jy ! Component: 100 - total flux cleaned = 0.000217351 Jy ! Component: 150 - total flux cleaned = 0.000287518 Jy ! Component: 200 - total flux cleaned = 0.000360469 Jy ! Total flux subtracted in 200 components = 0.000360469 Jy ! Clean residual min=-0.000705 max=0.000613 Jy/beam ! Clean residual mean=-0.000000 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.157163 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 116 components and 0.157163 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8318 mas, bmaj=2.043 mas, bpa=-4.612 degrees ! Estimated noise=0.214052 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208101 Jy ! Component: 100 - total flux cleaned = 0.000331197 Jy ! Component: 150 - total flux cleaned = 0.000405323 Jy ! Component: 200 - total flux cleaned = 0.000473542 Jy ! Total flux subtracted in 200 components = 0.000473542 Jy ! Clean residual min=-0.000695 max=0.000631 Jy/beam ! Clean residual mean=0.000000 rms=0.000160 Jy/beam ! Combined flux in latest and established models = 0.157636 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 139 components and 0.157636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063758Jy sigma=0.806791 ! Fit after self-cal, rms=0.063756Jy sigma=0.806776 wmodel J1803+0341_X_map.mod ! Writing 139 model components to file: J1803+0341_X_map.mod wobs J1803+0341_X_uvs.fits ! Writing UV FITS file: J1803+0341_X_uvs.fits wwins J1803+0341_X_map.win ! wwins: Wrote 4 windows to J1803+0341_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232079 Jy ! Component: 100 - total flux cleaned = -0.00033896 Jy ! Component: 150 - total flux cleaned = -0.000384729 Jy ! Component: 200 - total flux cleaned = -0.000417772 Jy ! Component: 250 - total flux cleaned = -0.000396348 Jy ! Component: 300 - total flux cleaned = -0.000406586 Jy ! Component: 350 - total flux cleaned = -0.000396223 Jy ! Component: 400 - total flux cleaned = -0.000396007 Jy ! Component: 450 - total flux cleaned = -0.000366359 Jy ! Component: 500 - total flux cleaned = -0.000386014 Jy ! Component: 550 - total flux cleaned = -0.000405225 Jy ! Component: 600 - total flux cleaned = -0.000433516 Jy ! Component: 650 - total flux cleaned = -0.000461516 Jy ! Component: 700 - total flux cleaned = -0.000488988 Jy ! Component: 750 - total flux cleaned = -0.00048896 Jy ! Component: 800 - total flux cleaned = -0.000507006 Jy ! Component: 850 - total flux cleaned = -0.000533573 Jy ! Component: 900 - total flux cleaned = -0.000489845 Jy ! Component: 950 - total flux cleaned = -0.000516043 Jy ! Component: 1000 - total flux cleaned = -0.000541873 Jy ! Component: 1050 - total flux cleaned = -0.000541667 Jy ! Component: 1100 - total flux cleaned = -0.000541592 Jy ! Component: 1150 - total flux cleaned = -0.000541554 Jy ! Component: 1200 - total flux cleaned = -0.000524879 Jy ! Component: 1250 - total flux cleaned = -0.000524849 Jy ! Component: 1300 - total flux cleaned = -0.000524781 Jy ! Component: 1350 - total flux cleaned = -0.000508454 Jy ! Component: 1400 - total flux cleaned = -0.000500404 Jy ! Component: 1450 - total flux cleaned = -0.000508471 Jy ! Component: 1500 - total flux cleaned = -0.000516413 Jy ! Component: 1550 - total flux cleaned = -0.000524305 Jy ! Component: 1600 - total flux cleaned = -0.00050079 Jy ! Component: 1650 - total flux cleaned = -0.000500818 Jy ! Component: 1700 - total flux cleaned = -0.000516354 Jy ! Component: 1750 - total flux cleaned = -0.000508647 Jy ! Component: 1800 - total flux cleaned = -0.000508698 Jy ! Component: 1850 - total flux cleaned = -0.000516284 Jy ! Component: 1900 - total flux cleaned = -0.000485904 Jy ! Component: 1950 - total flux cleaned = -0.000501032 Jy ! Component: 2000 - total flux cleaned = -0.000486105 Jy ! Component: 2050 - total flux cleaned = -0.000478579 Jy ! Component: 2100 - total flux cleaned = -0.000493291 Jy ! Component: 2150 - total flux cleaned = -0.000463843 Jy ! Component: 2200 - total flux cleaned = -0.000456487 Jy ! Component: 2250 - total flux cleaned = -0.000449158 Jy ! Component: 2300 - total flux cleaned = -0.000449162 Jy ! Component: 2350 - total flux cleaned = -0.000420361 Jy ! Component: 2400 - total flux cleaned = -0.000441899 Jy ! Component: 2450 - total flux cleaned = -0.000434737 Jy ! Component: 2500 - total flux cleaned = -0.00044184 Jy ! Component: 2550 - total flux cleaned = -0.000448931 Jy ! Component: 2600 - total flux cleaned = -0.000455913 Jy ! Component: 2650 - total flux cleaned = -0.00044887 Jy ! Component: 2700 - total flux cleaned = -0.000476627 Jy ! Component: 2750 - total flux cleaned = -0.000435118 Jy ! Component: 2800 - total flux cleaned = -0.000435106 Jy ! Component: 2850 - total flux cleaned = -0.000455709 Jy ! Component: 2900 - total flux cleaned = -0.000469343 Jy ! Component: 2950 - total flux cleaned = -0.000435332 Jy ! Component: 3000 - total flux cleaned = -0.00042857 Jy ! Component: 3050 - total flux cleaned = -0.000455416 Jy ! Component: 3100 - total flux cleaned = -0.000468764 Jy ! Component: 3150 - total flux cleaned = -0.000468775 Jy ! Component: 3200 - total flux cleaned = -0.000455459 Jy ! Component: 3250 - total flux cleaned = -0.000429043 Jy ! Component: 3300 - total flux cleaned = -0.000442178 Jy ! Component: 3350 - total flux cleaned = -0.000461806 Jy ! Component: 3400 - total flux cleaned = -0.000448761 Jy ! Component: 3450 - total flux cleaned = -0.000481188 Jy ! Component: 3500 - total flux cleaned = -0.000481154 Jy ! Component: 3550 - total flux cleaned = -0.000481144 Jy ! Component: 3600 - total flux cleaned = -0.000481181 Jy ! Component: 3650 - total flux cleaned = -0.000468361 Jy ! Component: 3700 - total flux cleaned = -0.000506426 Jy ! Component: 3750 - total flux cleaned = -0.000474853 Jy ! Component: 3800 - total flux cleaned = -0.000462276 Jy ! Component: 3850 - total flux cleaned = -0.000474823 Jy ! Component: 3900 - total flux cleaned = -0.000512339 Jy ! Component: 3950 - total flux cleaned = -0.000475033 Jy ! Component: 4000 - total flux cleaned = -0.000493612 Jy ! Component: 4050 - total flux cleaned = -0.000487451 Jy ! Total flux subtracted in 4096 components = -0.000475135 Jy ! Clean residual min=-0.000350 max=0.000378 Jy/beam ! Clean residual mean=0.000000 rms=0.000108 Jy/beam ! Combined flux in latest and established models = 0.157161 Jy keep ! Adding 320 model components to the UV plane model. ! The established model now contains 459 components and 0.157161 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1803+0341_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8318 x 2.043 at -4.612 degrees (North through East) ! Clean map min=-0.00053926 max=0.13765 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1803+0341_X_map.fits wmodel /vlbi/bp222/temp_maps//J1803+0341_X_map.mod ! Writing 459 model components to file: /vlbi/bp222/temp_maps//J1803+0341_X_map.mod wobs /vlbi/bp222/temp_maps//J1803+0341_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1803+0341_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1803+0341_X_map.win ! wwins: Wrote 5 windows to /vlbi/bp222/temp_maps//J1803+0341_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.137648 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000107753 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.234846 0.234846 0.469692 0.939384 1.87877 3.75754 7.51507 15.0301 30.0603 60.1206 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.137 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1277.43 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1803+0341_X_dfm.log closed on Thu Feb 14 23:05:48 2019