! Started logfile: /vlbi/bp222/temp_maps//J1802-3940_X_dfm.log on Thu Feb 14 23:05:29 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1802-3940_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1802-3940_X_uvm.fits ! AN table 1: 32 integrations on 28 of 28 possible baselines. ! AN table 2: 34 integrations on 28 of 28 possible baselines. ! AN table 3: 16 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.777888 visibilities/baseline/integration-bin. ! Found source: J1802-3940 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 18744 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1802-3940_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.367749Jy sigma=13.933144 ! Fit after self-cal, rms=0.270394Jy sigma=2.238249 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6588 mas, bmaj=2.1 mas, bpa=2.087 degrees ! Estimated noise=1.07556 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.700686 Jy ! Component: 100 - total flux cleaned = 0.858274 Jy ! Total flux subtracted in 100 components = 0.858274 Jy ! Clean residual min=-0.044573 max=0.112989 Jy/beam ! Clean residual mean=0.000008 rms=0.011323 Jy/beam ! Combined flux in latest and established models = 0.858274 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.858274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.261184Jy sigma=2.601575 ! Fit after self-cal, rms=0.261167Jy sigma=2.601415 ! Inverting map ! Added new window around map position (-0.2, -3.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0970204 Jy ! Component: 100 - total flux cleaned = 0.145 Jy ! Total flux subtracted in 100 components = 0.145 Jy ! Clean residual min=-0.040846 max=0.076406 Jy/beam ! Clean residual mean=0.000005 rms=0.008565 Jy/beam ! Combined flux in latest and established models = 1.00327 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 13 components and 1.00327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.215132Jy sigma=1.939751 ! Fit after self-cal, rms=0.211637Jy sigma=1.893438 ! Inverting map ! Added new window around map position (1.6, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0591252 Jy ! Component: 100 - total flux cleaned = 0.0889882 Jy ! Total flux subtracted in 100 components = 0.0889882 Jy ! Clean residual min=-0.036289 max=0.053357 Jy/beam ! Clean residual mean=0.000000 rms=0.007217 Jy/beam ! Combined flux in latest and established models = 1.09226 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 24 components and 1.09226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.191091Jy sigma=1.618239 ! Fit after self-cal, rms=0.188299Jy sigma=1.581705 ! Inverting map ! Added new window around map position (-2, -3.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442476 Jy ! Component: 100 - total flux cleaned = 0.0624002 Jy ! Total flux subtracted in 100 components = 0.0624002 Jy ! Clean residual min=-0.031294 max=0.038945 Jy/beam ! Clean residual mean=-0.000005 rms=0.006265 Jy/beam ! Combined flux in latest and established models = 1.15466 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 1.15466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.175587Jy sigma=1.452654 ! Fit after self-cal, rms=0.175214Jy sigma=1.440658 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9445 mas, bmaj=2.829 mas, bpa=1.635 degrees ! Estimated noise=0.561951 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0295836 Jy ! Component: 100 - total flux cleaned = 0.0469493 Jy ! Component: 150 - total flux cleaned = 0.0519562 Jy ! Component: 200 - total flux cleaned = 0.0541218 Jy ! Total flux subtracted in 200 components = 0.0541218 Jy ! Clean residual min=-0.025873 max=0.030506 Jy/beam ! Clean residual mean=-0.000073 rms=0.007021 Jy/beam ! Combined flux in latest and established models = 1.20878 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 45 components and 1.20878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.168892Jy sigma=1.375419 ! Fit after self-cal, rms=0.169141Jy sigma=1.368865 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9445 x 2.829 at 1.635 degrees (North through East) ! Clean map min=-0.025324 max=0.83783 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.98 KP 0.98 LA 0.97 MK 1.01 ! NL 1.40 OV 0.92 PT 1.06 SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.30 KP 1.01 LA 0.98 ! NL 1.02 OV 0.94 PT 1.05 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.93 LA 0.95 NL 1.01 OV 0.90 ! PT 1.04 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 KP 1.00 LA 0.95 MK 1.00 ! NL 1.41 OV 0.94 PT 1.04 SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.28 KP 1.00 LA 0.97 ! NL 1.02 OV 0.94 PT 1.05 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 LA 0.95 NL 1.04 OV 0.89 ! PT 1.03 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 KP 0.99 LA 0.96 MK 1.01 ! NL 1.41 OV 0.94 PT 1.05 SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 HN 1.28 KP 1.01 LA 0.97 ! NL 1.03 OV 0.95 PT 1.04 SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 LA 0.98 NL 1.02 OV 0.90 ! PT 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 KP 0.99 LA 0.95 MK 1.00 ! NL 1.43 OV 0.94 PT 1.06 SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.26 KP 1.00 LA 0.97 ! NL 1.01 OV 0.96 PT 1.05 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 LA 0.97 NL 1.03 OV 0.88 ! PT 1.03 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 KP 1.00 LA 0.95 MK 0.99 ! NL 1.37 OV 0.94 PT 1.06 SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 HN 1.24 KP 1.00 LA 0.97 ! NL 1.00 OV 0.94 PT 1.06 SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 LA 0.95 NL 1.02 OV 0.90 ! PT 1.05 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 KP 1.00 LA 0.94 MK 0.97 ! NL 1.37 OV 0.92 PT 1.06 SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 HN 1.26 KP 1.01 LA 0.98 ! NL 0.98 OV 0.95 PT 1.06 SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 LA 0.96 NL 1.02 OV 0.89 ! PT 1.03 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 KP 1.01 LA 0.93 MK 1.01 ! NL 1.41 OV 0.93 PT 1.03 SC 1.00 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 HN 1.22 KP 1.01 LA 0.98 ! NL 0.98 OV 0.95 PT 1.04 SC 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.96 LA 0.95 NL 1.00 OV 0.88 ! PT 1.05 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 KP 0.98 LA 0.95 MK 0.98 ! NL 1.40 OV 0.93 PT 1.05 SC 1.03 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 HN 1.28 KP 1.00 LA 0.97 ! NL 0.99 OV 0.95 PT 1.04 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 LA 0.98 NL 0.99 OV 0.90 ! PT 1.05 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.96 KP 0.99 LA 0.94 MK 1.00 ! NL 1.37 OV 0.92 PT 1.06 SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.95 HN 1.23 KP 1.01 LA 0.97 ! NL 0.98 OV 0.95 PT 1.04 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 LA 0.95 NL 1.02 OV 0.89 ! PT 1.06 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 KP 0.99 LA 0.94 MK 0.99 ! NL 1.39 OV 0.93 PT 1.06 SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 HN 1.24 KP 1.00 LA 0.97 ! NL 0.99 OV 0.95 PT 1.04 SC 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 LA 0.97 NL 1.01 OV 0.89 ! PT 1.05 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.97 KP 0.99 LA 0.94 MK 0.98 ! NL 1.36 OV 0.93 PT 1.05 SC 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.93 HN 1.26 KP 1.00 LA 0.97 ! NL 0.96 OV 0.95 PT 1.07 SC 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.94 LA 0.98 NL 0.97 OV 0.90 ! PT 1.08 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 KP 1.00 LA 0.94 MK 0.97 ! NL 1.40 OV 0.93 PT 1.03 SC 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.93 HN 1.27 KP 1.00 LA 0.96 ! NL 0.97 OV 0.95 PT 1.04 SC 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.95 LA 0.99 NL 1.05 OV 0.87 ! PT 1.05 ! ! ! Fit before self-cal, rms=0.169141Jy sigma=1.368865 ! Fit after self-cal, rms=0.136877Jy sigma=0.973620 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9603 mas, bmaj=2.856 mas, bpa=1.984 degrees ! Estimated noise=0.573699 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0145456 Jy ! Component: 100 - total flux cleaned = -0.0167618 Jy ! Component: 150 - total flux cleaned = -0.0178325 Jy ! Component: 200 - total flux cleaned = -0.018466 Jy ! Total flux subtracted in 200 components = -0.018466 Jy ! Clean residual min=-0.021052 max=0.017588 Jy/beam ! Clean residual mean=0.000072 rms=0.003682 Jy/beam ! Combined flux in latest and established models = 1.19032 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 1.19032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.133461Jy sigma=0.946248 ! Fit after self-cal, rms=0.133065Jy sigma=0.944118 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.133065Jy sigma=0.944118 ! Fit after self-cal, rms=0.133144Jy sigma=0.937134 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9633 mas, bmaj=2.863 mas, bpa=2.102 degrees ! Estimated noise=0.573287 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0126313 Jy ! Component: 100 - total flux cleaned = -0.0142933 Jy ! Component: 150 - total flux cleaned = -0.0151457 Jy ! Component: 200 - total flux cleaned = -0.0158976 Jy ! Total flux subtracted in 200 components = -0.0158976 Jy ! Clean residual min=-0.019278 max=0.016698 Jy/beam ! Clean residual mean=0.000077 rms=0.003440 Jy/beam ! Combined flux in latest and established models = 1.17442 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 1.17442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.130941Jy sigma=0.919856 ! Fit after self-cal, rms=0.130472Jy sigma=0.918501 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00249475 Jy ! Component: 100 - total flux cleaned = -0.00316411 Jy ! Component: 150 - total flux cleaned = -0.00376296 Jy ! Component: 200 - total flux cleaned = -0.00376229 Jy ! Total flux subtracted in 200 components = -0.00376229 Jy ! Clean residual min=-0.018263 max=0.015740 Jy/beam ! Clean residual mean=0.000078 rms=0.003372 Jy/beam ! Combined flux in latest and established models = 1.17066 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 68 components and 1.17066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.129710Jy sigma=0.911726 ! Fit after self-cal, rms=0.129535Jy sigma=0.911345 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.129535Jy sigma=0.911345 ! Fit after self-cal, rms=0.122374Jy sigma=0.827188 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.965 mas, bmaj=2.868 mas, bpa=2.156 degrees ! Estimated noise=0.573405 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00970098 Jy ! Component: 100 - total flux cleaned = -0.0114767 Jy ! Component: 150 - total flux cleaned = -0.0124113 Jy ! Component: 200 - total flux cleaned = -0.0129031 Jy ! Total flux subtracted in 200 components = -0.0129031 Jy ! Clean residual min=-0.016312 max=0.009963 Jy/beam ! Clean residual mean=0.000036 rms=0.002479 Jy/beam ! Combined flux in latest and established models = 1.15775 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 80 components and 1.15776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.121222Jy sigma=0.816383 ! Fit after self-cal, rms=0.120785Jy sigma=0.814897 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220283 Jy ! Component: 100 - total flux cleaned = -0.00235835 Jy ! Component: 150 - total flux cleaned = -0.00277987 Jy ! Component: 200 - total flux cleaned = -0.00303241 Jy ! Total flux subtracted in 200 components = -0.00303241 Jy ! Clean residual min=-0.015043 max=0.009164 Jy/beam ! Clean residual mean=0.000038 rms=0.002419 Jy/beam ! Combined flux in latest and established models = 1.15472 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 84 components and 1.15472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.120419Jy sigma=0.810624 ! Fit after self-cal, rms=0.120234Jy sigma=0.810217 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.120234Jy sigma=0.810217 ! Fit after self-cal, rms=0.120307Jy sigma=0.805202 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.45 mas, bmaj=8.018 mas, bpa=-6.012 degrees ! Estimated noise=0.661069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00968772 Jy ! Component: 100 - total flux cleaned = -0.0138418 Jy ! Component: 150 - total flux cleaned = -0.0147609 Jy ! Component: 200 - total flux cleaned = -0.0153995 Jy ! Total flux subtracted in 200 components = -0.0153995 Jy ! Clean residual min=-0.012868 max=0.008710 Jy/beam ! Clean residual mean=0.000061 rms=0.002872 Jy/beam ! Combined flux in latest and established models = 1.13932 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 86 components and 1.13932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119994Jy sigma=0.799833 ! Fit after self-cal, rms=0.119743Jy sigma=0.798498 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00151086 Jy ! Component: 100 - total flux cleaned = -0.00163951 Jy ! Component: 150 - total flux cleaned = -0.00175961 Jy ! Component: 200 - total flux cleaned = -0.00196361 Jy ! Total flux subtracted in 200 components = -0.00196361 Jy ! Clean residual min=-0.012623 max=0.008707 Jy/beam ! Clean residual mean=0.000063 rms=0.002824 Jy/beam ! Combined flux in latest and established models = 1.13736 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 92 components and 1.13736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119706Jy sigma=0.797274 ! Fit after self-cal, rms=0.119587Jy sigma=0.796722 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9665 mas, bmaj=2.874 mas, bpa=2.194 degrees ! Estimated noise=0.573386 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9665 x 2.874 at 2.194 degrees (North through East) ! Clean map min=-0.011866 max=0.86293 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119587Jy sigma=0.796722 ! Fit after self-cal, rms=0.114288Jy sigma=0.710726 ! Inverting map and beam ! Estimated beam: bmin=0.9668 mas, bmaj=2.876 mas, bpa=2.24 degrees ! Estimated noise=0.573188 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0067247 Jy ! Component: 100 - total flux cleaned = -0.00761468 Jy ! Component: 150 - total flux cleaned = -0.00852669 Jy ! Component: 200 - total flux cleaned = -0.00917434 Jy ! Total flux subtracted in 200 components = -0.00917434 Jy ! Clean residual min=-0.013264 max=0.008188 Jy/beam ! Clean residual mean=0.000033 rms=0.001990 Jy/beam ! Combined flux in latest and established models = 1.12819 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 99 components and 1.12819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113531Jy sigma=0.704393 ! Fit after self-cal, rms=0.113206Jy sigma=0.703743 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000783768 Jy ! Component: 100 - total flux cleaned = -0.00102834 Jy ! Component: 150 - total flux cleaned = -0.0011374 Jy ! Component: 200 - total flux cleaned = -0.00113539 Jy ! Total flux subtracted in 200 components = -0.00113539 Jy ! Clean residual min=-0.012511 max=0.007591 Jy/beam ! Clean residual mean=0.000033 rms=0.001957 Jy/beam ! Combined flux in latest and established models = 1.12705 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 103 components and 1.12705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112996Jy sigma=0.700780 ! Fit after self-cal, rms=0.112826Jy sigma=0.700555 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.112826Jy sigma=0.700555 ! Fit after self-cal, rms=0.113083Jy sigma=0.697508 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.659 mas, bmaj=2.091 mas, bpa=2.632 degrees ! Estimated noise=1.15424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.73127 Jy ! Component: 100 - total flux cleaned = 0.902783 Jy ! Component: 150 - total flux cleaned = 0.974813 Jy ! Component: 200 - total flux cleaned = 1.01877 Jy ! Total flux subtracted in 200 components = 1.01877 Jy ! Clean residual min=-0.016399 max=0.031574 Jy/beam ! Clean residual mean=0.000011 rms=0.003520 Jy/beam ! Combined flux in latest and established models = 1.01877 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 1.01877 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9678 mas, bmaj=2.879 mas, bpa=2.269 degrees ! Estimated noise=0.57284 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0436879 Jy ! Component: 100 - total flux cleaned = 0.0681761 Jy ! Component: 150 - total flux cleaned = 0.0831233 Jy ! Component: 200 - total flux cleaned = 0.0925813 Jy ! Total flux subtracted in 200 components = 0.0925813 Jy ! Clean residual min=-0.011386 max=0.009793 Jy/beam ! Clean residual mean=0.000023 rms=0.002092 Jy/beam ! Combined flux in latest and established models = 1.11135 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 44 components and 1.11135 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.467 mas, bmaj=8.083 mas, bpa=-5.914 degrees ! Estimated noise=0.657598 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00377367 Jy ! Component: 100 - total flux cleaned = 0.0050779 Jy ! Component: 150 - total flux cleaned = 0.00586088 Jy ! Component: 200 - total flux cleaned = 0.00649154 Jy ! Total flux subtracted in 200 components = 0.00649154 Jy ! Clean residual min=-0.010554 max=0.006985 Jy/beam ! Clean residual mean=0.000043 rms=0.002392 Jy/beam ! Combined flux in latest and established models = 1.11784 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000621555 Jy ! Component: 100 - total flux cleaned = 0.000618782 Jy ! Component: 150 - total flux cleaned = 0.000522102 Jy ! Component: 200 - total flux cleaned = 0.000519379 Jy ! Total flux subtracted in 200 components = 0.000519379 Jy ! Clean residual min=-0.010259 max=0.007101 Jy/beam ! Clean residual mean=0.000045 rms=0.002321 Jy/beam ! Combined flux in latest and established models = 1.11836 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 66 components and 1.11836 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9678 mas, bmaj=2.879 mas, bpa=2.269 degrees ! Estimated noise=0.57284 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00237089 Jy ! Component: 100 - total flux cleaned = -0.00216962 Jy ! Component: 150 - total flux cleaned = -0.00181627 Jy ! Component: 200 - total flux cleaned = -0.00165972 Jy ! Total flux subtracted in 200 components = -0.00165972 Jy ! Clean residual min=-0.010672 max=0.006890 Jy/beam ! Clean residual mean=0.000028 rms=0.001814 Jy/beam ! Combined flux in latest and established models = 1.1167 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 80 components and 1.1167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.111981Jy sigma=0.693191 ! Fit after self-cal, rms=0.111481Jy sigma=0.690369 wmodel J1802-3940_X_map.mod ! Writing 80 model components to file: J1802-3940_X_map.mod wobs J1802-3940_X_uvs.fits ! Writing UV FITS file: J1802-3940_X_uvs.fits wwins J1802-3940_X_map.win ! wwins: Wrote 5 windows to J1802-3940_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00349878 Jy ! Component: 100 - total flux cleaned = -0.00562785 Jy ! Component: 150 - total flux cleaned = -0.00780163 Jy ! Component: 200 - total flux cleaned = -0.00910709 Jy ! Component: 250 - total flux cleaned = -0.00988306 Jy ! Component: 300 - total flux cleaned = -0.0110378 Jy ! Component: 350 - total flux cleaned = -0.0122365 Jy ! Component: 400 - total flux cleaned = -0.0132927 Jy ! Component: 450 - total flux cleaned = -0.0140372 Jy ! Component: 500 - total flux cleaned = -0.0148433 Jy ! Component: 550 - total flux cleaned = -0.0154506 Jy ! Component: 600 - total flux cleaned = -0.0159565 Jy ! Component: 650 - total flux cleaned = -0.016287 Jy ! Component: 700 - total flux cleaned = -0.0167687 Jy ! Component: 750 - total flux cleaned = -0.0169252 Jy ! Component: 800 - total flux cleaned = -0.0172325 Jy ! Component: 850 - total flux cleaned = -0.0173817 Jy ! Component: 900 - total flux cleaned = -0.0173819 Jy ! Component: 950 - total flux cleaned = -0.017528 Jy ! Component: 1000 - total flux cleaned = -0.0175994 Jy ! Component: 1050 - total flux cleaned = -0.0175295 Jy ! Component: 1100 - total flux cleaned = -0.0175289 Jy ! Component: 1150 - total flux cleaned = -0.0173934 Jy ! Component: 1200 - total flux cleaned = -0.0173257 Jy ! Component: 1250 - total flux cleaned = -0.0172596 Jy ! Component: 1300 - total flux cleaned = -0.0171948 Jy ! Component: 1350 - total flux cleaned = -0.0171944 Jy ! Component: 1400 - total flux cleaned = -0.0172573 Jy ! Component: 1450 - total flux cleaned = -0.0171946 Jy ! Component: 1500 - total flux cleaned = -0.017256 Jy ! Component: 1550 - total flux cleaned = -0.0174375 Jy ! Component: 1600 - total flux cleaned = -0.0173761 Jy ! Component: 1650 - total flux cleaned = -0.017731 Jy ! Component: 1700 - total flux cleaned = -0.0179647 Jy ! Component: 1750 - total flux cleaned = -0.0180223 Jy ! Component: 1800 - total flux cleaned = -0.0183091 Jy ! Component: 1850 - total flux cleaned = -0.0183092 Jy ! Component: 1900 - total flux cleaned = -0.0184778 Jy ! Component: 1950 - total flux cleaned = -0.0186447 Jy ! Component: 2000 - total flux cleaned = -0.01892 Jy ! Component: 2050 - total flux cleaned = -0.0191916 Jy ! Component: 2100 - total flux cleaned = -0.0193533 Jy ! Component: 2150 - total flux cleaned = -0.0194601 Jy ! Component: 2200 - total flux cleaned = -0.0196717 Jy ! Component: 2250 - total flux cleaned = -0.0196715 Jy ! Component: 2300 - total flux cleaned = -0.0199829 Jy ! Component: 2350 - total flux cleaned = -0.0202394 Jy ! Component: 2400 - total flux cleaned = -0.0202906 Jy ! Component: 2450 - total flux cleaned = -0.0203424 Jy ! Component: 2500 - total flux cleaned = -0.0205936 Jy ! Component: 2550 - total flux cleaned = -0.0207429 Jy ! Component: 2600 - total flux cleaned = -0.0210382 Jy ! Component: 2650 - total flux cleaned = -0.0211849 Jy ! Component: 2700 - total flux cleaned = -0.0215229 Jy ! Component: 2750 - total flux cleaned = -0.0215706 Jy ! Component: 2800 - total flux cleaned = -0.0217603 Jy ! Component: 2850 - total flux cleaned = -0.021761 Jy ! Component: 2900 - total flux cleaned = -0.0219481 Jy ! Component: 2950 - total flux cleaned = -0.0221805 Jy ! Component: 3000 - total flux cleaned = -0.0223179 Jy ! Component: 3050 - total flux cleaned = -0.0224996 Jy ! Component: 3100 - total flux cleaned = -0.0226352 Jy ! Component: 3150 - total flux cleaned = -0.0225008 Jy ! Component: 3200 - total flux cleaned = -0.0228121 Jy ! Component: 3250 - total flux cleaned = -0.0228565 Jy ! Component: 3300 - total flux cleaned = -0.0229001 Jy ! Component: 3350 - total flux cleaned = -0.0228998 Jy ! Component: 3400 - total flux cleaned = -0.0229434 Jy ! Component: 3450 - total flux cleaned = -0.0231577 Jy ! Component: 3500 - total flux cleaned = -0.0231576 Jy ! Component: 3550 - total flux cleaned = -0.0232842 Jy ! Component: 3600 - total flux cleaned = -0.0233263 Jy ! Component: 3650 - total flux cleaned = -0.0234928 Jy ! Component: 3700 - total flux cleaned = -0.0234513 Jy ! Component: 3750 - total flux cleaned = -0.0236157 Jy ! Component: 3800 - total flux cleaned = -0.0235345 Jy ! Component: 3850 - total flux cleaned = -0.0236963 Jy ! Component: 3900 - total flux cleaned = -0.0237365 Jy ! Component: 3950 - total flux cleaned = -0.0238168 Jy ! Component: 4000 - total flux cleaned = -0.024015 Jy ! Component: 4050 - total flux cleaned = -0.0240148 Jy ! Total flux subtracted in 4096 components = -0.0241323 Jy ! Clean residual min=-0.002440 max=0.001969 Jy/beam ! Clean residual mean=-0.000005 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 1.09257 Jy keep ! Adding 349 model components to the UV plane model. ! The established model now contains 429 components and 1.09257 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1802-3940_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9678 x 2.879 at 2.269 degrees (North through East) ! Clean map min=-0.0092398 max=0.88462 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1802-3940_X_map.fits wmodel /vlbi/bp222/temp_maps//J1802-3940_X_map.mod ! Writing 429 model components to file: /vlbi/bp222/temp_maps//J1802-3940_X_map.mod wobs /vlbi/bp222/temp_maps//J1802-3940_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1802-3940_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1802-3940_X_map.win ! wwins: Wrote 6 windows to /vlbi/bp222/temp_maps//J1802-3940_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.88462 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000765533 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.259614 0.259614 0.519228 1.03846 2.07691 4.15383 8.30765 16.6153 33.2306 66.4612 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.884 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1155.56 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1802-3940_X_dfm.log closed on Thu Feb 14 23:05:34 2019