! Started logfile: /vlbi/bp222/temp_maps//J1723+6547_X_dfm.log on Thu Feb 14 23:04:49 2019 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/temp_maps//J1723+6547_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/temp_maps//J1723+6547_X_uvm.fits ! AN table 1: 23 integrations on 28 of 28 possible baselines. ! AN table 2: 67 integrations on 36 of 36 possible baselines. ! AN table 3: 24 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.87551 visibilities/baseline/integration-bin. ! Found source: J1723+6547 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 108 lines of history. ! ! Reading 41184 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1723+6547_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.008603Jy sigma=16.613543 ! Fit after self-cal, rms=0.891511Jy sigma=14.604764 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6876 mas, bmaj=1.457 mas, bpa=17.03 degrees ! Estimated noise=0.494616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0809781 Jy ! Component: 100 - total flux cleaned = 0.104157 Jy ! Total flux subtracted in 100 components = 0.104157 Jy ! Clean residual min=-0.004451 max=0.010521 Jy/beam ! Clean residual mean=0.000010 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.104157 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.104157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063453Jy sigma=0.985351 ! Fit after self-cal, rms=0.063277Jy sigma=0.982748 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129097 Jy ! Component: 100 - total flux cleaned = 0.0207516 Jy ! Total flux subtracted in 100 components = 0.0207516 Jy ! Clean residual min=-0.004001 max=0.006574 Jy/beam ! Clean residual mean=0.000006 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.124909 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 22 components and 0.124909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059563Jy sigma=0.906511 ! Fit after self-cal, rms=0.059458Jy sigma=0.904738 ! Inverting map ! Added new window around map position (-0.6, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00734999 Jy ! Component: 100 - total flux cleaned = 0.0121689 Jy ! Total flux subtracted in 100 components = 0.0121689 Jy ! Clean residual min=-0.003621 max=0.003598 Jy/beam ! Clean residual mean=0.000003 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.137078 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.137078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058270Jy sigma=0.880484 ! Fit after self-cal, rms=0.058181Jy sigma=0.879229 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9097 mas, bmaj=1.777 mas, bpa=15.28 degrees ! Estimated noise=0.219287 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00535427 Jy ! Component: 100 - total flux cleaned = 0.00814195 Jy ! Component: 150 - total flux cleaned = 0.009958 Jy ! Component: 200 - total flux cleaned = 0.0107833 Jy ! Total flux subtracted in 200 components = 0.0107833 Jy ! Clean residual min=-0.002741 max=0.002343 Jy/beam ! Clean residual mean=0.000003 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.147861 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 0.147861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057714Jy sigma=0.869866 ! Fit after self-cal, rms=0.057633Jy sigma=0.868783 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9097 x 1.777 at 15.28 degrees (North through East) ! Clean map min=-0.0021919 max=0.10533 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 0.99 KP 0.96 ! MK 1.10 NL 1.02 OV 0.92 SC 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.99 KP 1.00 LA 1.03 ! MK 0.98 NL 0.94 OV 1.03 PT 0.98 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 HN 1.04 KP 0.99 LA 0.98 ! MK 1.04 NL 1.00 OV 1.00 PT 1.00 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.01 KP 0.99 ! MK 1.03 NL 0.95 OV 0.97 SC 1.08 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.98 KP 1.01 LA 1.04 ! MK 1.06 NL 0.93 OV 1.03 PT 0.99 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 HN 1.04 KP 0.99 LA 0.98 ! MK 1.02 NL 1.02 OV 1.00 PT 1.05 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 1.06 KP 0.97 ! MK 1.02 NL 0.99 OV 0.94 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.98 KP 0.99 LA 1.01 ! MK 1.04 NL 0.93 OV 1.03 PT 0.99 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 HN 1.05 KP 1.03 LA 0.96 ! MK 1.02 NL 0.97 OV 1.02 PT 1.01 ! SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 1.03 KP 0.99 ! MK 1.08 NL 0.98 OV 0.99 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.97 KP 1.01 LA 1.00 ! MK 1.02 NL 0.94 OV 1.02 PT 1.02 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.11 HN 1.00 KP 0.99 LA 0.96 ! MK 1.02 NL 1.02 OV 1.05 PT 1.03 ! SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 0.99 KP 0.96 ! MK 1.03 NL 1.01 OV 0.96 SC 0.89 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.01 KP 1.02 LA 1.03 ! MK 1.03 NL 0.92 OV 1.02 PT 0.98 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 HN 0.98 KP 1.01 LA 0.98 ! MK 0.97 NL 1.02 OV 1.05 PT 1.01 ! SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 1.03 KP 1.02 ! MK 1.07 NL 1.00 OV 0.97 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 KP 1.02 LA 1.02 ! MK 1.00 NL 0.91 OV 1.01 PT 0.98 ! SC 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 HN 0.97 KP 1.02 LA 0.95 ! MK 1.02 NL 1.03 OV 1.02 PT 1.07 ! SC 1.06 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 0.98 KP 1.03 ! MK 1.09 NL 0.97 OV 0.95 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.01 KP 1.04 LA 1.02 ! MK 1.02 NL 0.96 OV 1.00 PT 0.96 ! SC 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 HN 0.99 KP 1.00 LA 0.97 ! MK 1.00 NL 1.00 OV 1.03 PT 1.02 ! SC 1.01 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 0.98 KP 1.04 ! MK 1.02 NL 0.96 OV 1.02 SC 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 KP 0.99 LA 1.05 ! MK 1.00 NL 0.89 OV 1.02 PT 1.00 ! SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 HN 1.02 KP 0.97 LA 0.94 ! MK 1.03 NL 1.00 OV 1.03 PT 1.06 ! SC 0.93 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 HN 1.02 KP 0.97 ! MK 1.06 NL 1.01 OV 0.93 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.99 KP 1.03 LA 1.03 ! MK 1.01 NL 0.91 OV 1.00 PT 0.97 ! SC 1.10 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 HN 1.04 KP 0.98 LA 0.98 ! MK 1.03 NL 0.97 OV 1.02 PT 0.99 ! SC 0.99 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 0.99 KP 1.00 ! MK 1.02 NL 0.98 OV 1.07 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 KP 1.02 LA 1.03 ! MK 1.03 NL 0.92 OV 1.00 PT 0.99 ! SC 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 HN 1.00 KP 1.03 LA 0.97 ! MK 1.02 NL 1.03 OV 1.02 PT 1.00 ! SC 0.86 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.05 KP 0.99 ! MK 0.99 NL 0.96 OV 0.97 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.02 KP 1.01 LA 1.02 ! MK 1.02 NL 0.92 OV 1.01 PT 0.99 ! SC 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 HN 0.96 KP 0.98 LA 0.96 ! MK 0.98 NL 1.00 OV 1.07 PT 1.08 ! SC 0.97 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 1.01 KP 1.01 ! MK 1.09 NL 0.95 OV 1.03 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 KP 1.04 LA 0.98 ! MK 0.94 NL 0.92 OV 1.02 PT 0.96 ! SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 HN 0.99 KP 1.00 LA 0.94 ! MK 0.98 NL 1.06 OV 1.00 PT 1.00 ! SC 0.96 ! ! ! Fit before self-cal, rms=0.057633Jy sigma=0.868783 ! Fit after self-cal, rms=0.057786Jy sigma=0.863058 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9148 mas, bmaj=1.783 mas, bpa=15.58 degrees ! Estimated noise=0.219352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000550148 Jy ! Component: 100 - total flux cleaned = 0.000703191 Jy ! Component: 150 - total flux cleaned = 0.000703002 Jy ! Component: 200 - total flux cleaned = 0.000760751 Jy ! Total flux subtracted in 200 components = 0.000760751 Jy ! Clean residual min=-0.001621 max=0.001693 Jy/beam ! Clean residual mean=0.000000 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.148622 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.148622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057700Jy sigma=0.861721 ! Fit after self-cal, rms=0.057674Jy sigma=0.861240 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057674Jy sigma=0.861240 ! Fit after self-cal, rms=0.057608Jy sigma=0.858572 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9142 mas, bmaj=1.78 mas, bpa=15.61 degrees ! Estimated noise=0.219094 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000776178 Jy ! Component: 100 - total flux cleaned = 0.000960596 Jy ! Component: 150 - total flux cleaned = 0.00101722 Jy ! Component: 200 - total flux cleaned = 0.0010904 Jy ! Total flux subtracted in 200 components = 0.0010904 Jy ! Clean residual min=-0.001304 max=0.001285 Jy/beam ! Clean residual mean=-0.000001 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.149712 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.149712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057561Jy sigma=0.857830 ! Fit after self-cal, rms=0.057545Jy sigma=0.857606 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.8, 9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000799987 Jy ! Component: 100 - total flux cleaned = 0.00105386 Jy ! Component: 150 - total flux cleaned = 0.00111557 Jy ! Component: 200 - total flux cleaned = 0.00122624 Jy ! Total flux subtracted in 200 components = 0.00122624 Jy ! Clean residual min=-0.001195 max=0.001222 Jy/beam ! Clean residual mean=-0.000000 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 0.150938 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 67 components and 0.150938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057503Jy sigma=0.856915 ! Fit after self-cal, rms=0.057495Jy sigma=0.856849 ! Inverting map ! Added new window around map position (-2.6, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000455523 Jy ! Component: 100 - total flux cleaned = 0.000583321 Jy ! Component: 150 - total flux cleaned = 0.000752035 Jy ! Component: 200 - total flux cleaned = 0.000778458 Jy ! Total flux subtracted in 200 components = 0.000778458 Jy ! Clean residual min=-0.001102 max=0.001042 Jy/beam ! Clean residual mean=-0.000001 rms=0.000256 Jy/beam ! Combined flux in latest and established models = 0.151717 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 77 components and 0.151717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057460Jy sigma=0.856295 ! Fit after self-cal, rms=0.057454Jy sigma=0.856255 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057454Jy sigma=0.856255 ! Fit after self-cal, rms=0.057483Jy sigma=0.853869 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9136 mas, bmaj=1.775 mas, bpa=15.73 degrees ! Estimated noise=0.218748 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.73537e-05 Jy ! Component: 100 - total flux cleaned = -9.05326e-05 Jy ! Component: 150 - total flux cleaned = -0.000136002 Jy ! Component: 200 - total flux cleaned = -0.000157903 Jy ! Total flux subtracted in 200 components = -0.000157903 Jy ! Clean residual min=-0.000844 max=0.000903 Jy/beam ! Clean residual mean=-0.000000 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.151559 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 86 components and 0.151559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057462Jy sigma=0.853543 ! Fit after self-cal, rms=0.057463Jy sigma=0.853483 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21.8, -11.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000542994 Jy ! Component: 100 - total flux cleaned = 0.000684824 Jy ! Component: 150 - total flux cleaned = 0.000704968 Jy ! Component: 200 - total flux cleaned = 0.000705491 Jy ! Total flux subtracted in 200 components = 0.000705491 Jy ! Clean residual min=-0.000791 max=0.000796 Jy/beam ! Clean residual mean=0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.152264 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 97 components and 0.152264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057444Jy sigma=0.853177 ! Fit after self-cal, rms=0.057440Jy sigma=0.853149 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057440Jy sigma=0.853149 ! Fit after self-cal, rms=0.057447Jy sigma=0.853117 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.163 mas, bmaj=2.743 mas, bpa=14.81 degrees ! Estimated noise=0.267822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000470651 Jy ! Component: 100 - total flux cleaned = 0.000528853 Jy ! Component: 150 - total flux cleaned = 0.000591437 Jy ! Component: 200 - total flux cleaned = 0.000632941 Jy ! Total flux subtracted in 200 components = 0.000632941 Jy ! Clean residual min=-0.000889 max=0.000726 Jy/beam ! Clean residual mean=-0.000000 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.152897 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 113 components and 0.152897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057440Jy sigma=0.853004 ! Fit after self-cal, rms=0.057436Jy sigma=0.852975 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.12394e-05 Jy ! Component: 100 - total flux cleaned = 1.48698e-05 Jy ! Component: 150 - total flux cleaned = 6.03908e-05 Jy ! Component: 200 - total flux cleaned = 8.18815e-05 Jy ! Total flux subtracted in 200 components = 8.18815e-05 Jy ! Clean residual min=-0.000847 max=0.000719 Jy/beam ! Clean residual mean=-0.000000 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.152979 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 119 components and 0.152979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057432Jy sigma=0.852906 ! Fit after self-cal, rms=0.057429Jy sigma=0.852879 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9136 mas, bmaj=1.773 mas, bpa=15.78 degrees ! Estimated noise=0.218807 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9136 x 1.773 at 15.78 degrees (North through East) ! Clean map min=-0.0010091 max=0.10463 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6903 mas, bmaj=1.456 mas, bpa=17.62 degrees ! Estimated noise=0.494026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0806511 Jy ! Component: 100 - total flux cleaned = 0.106992 Jy ! Component: 150 - total flux cleaned = 0.121028 Jy ! Component: 200 - total flux cleaned = 0.129821 Jy ! Total flux subtracted in 200 components = 0.129821 Jy ! Clean residual min=-0.002459 max=0.004686 Jy/beam ! Clean residual mean=0.000004 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.129821 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.129821 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9136 mas, bmaj=1.773 mas, bpa=15.78 degrees ! Estimated noise=0.218807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00841882 Jy ! Component: 100 - total flux cleaned = 0.0130605 Jy ! Component: 150 - total flux cleaned = 0.0159676 Jy ! Component: 200 - total flux cleaned = 0.0178582 Jy ! Total flux subtracted in 200 components = 0.0178582 Jy ! Clean residual min=-0.000951 max=0.001305 Jy/beam ! Clean residual mean=0.000002 rms=0.000227 Jy/beam ! Combined flux in latest and established models = 0.14768 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 52 components and 0.147679 Jy ! Inverting map ! Added new window around map position (0.2, 1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119573 Jy ! Component: 100 - total flux cleaned = 0.00181293 Jy ! Component: 150 - total flux cleaned = 0.00215618 Jy ! Component: 200 - total flux cleaned = 0.00246048 Jy ! Total flux subtracted in 200 components = 0.00246048 Jy ! Clean residual min=-0.000841 max=0.000902 Jy/beam ! Clean residual mean=0.000001 rms=0.000199 Jy/beam ! Combined flux in latest and established models = 0.15014 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 76 components and 0.15014 Jy ! Inverting map ! Added new window around map position (-47.8, -35.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000555919 Jy ! Component: 100 - total flux cleaned = 0.000703682 Jy ! Component: 150 - total flux cleaned = 0.000896519 Jy ! Component: 200 - total flux cleaned = 0.00102512 Jy ! Total flux subtracted in 200 components = 0.00102512 Jy ! Clean residual min=-0.000790 max=0.000785 Jy/beam ! Clean residual mean=0.000000 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.151165 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 96 components and 0.151165 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.163 mas, bmaj=2.743 mas, bpa=14.81 degrees ! Estimated noise=0.267822 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000363302 Jy ! Component: 100 - total flux cleaned = 0.000715439 Jy ! Component: 150 - total flux cleaned = 0.00096543 Jy ! Component: 200 - total flux cleaned = 0.00115558 Jy ! Total flux subtracted in 200 components = 0.00115558 Jy ! Clean residual min=-0.000818 max=0.000739 Jy/beam ! Clean residual mean=-0.000000 rms=0.000191 Jy/beam ! Combined flux in latest and established models = 0.152321 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183209 Jy ! Component: 100 - total flux cleaned = 0.000272526 Jy ! Component: 150 - total flux cleaned = 0.000366645 Jy ! Component: 200 - total flux cleaned = 0.000442687 Jy ! Total flux subtracted in 200 components = 0.000442687 Jy ! Clean residual min=-0.000798 max=0.000698 Jy/beam ! Clean residual mean=-0.000000 rms=0.000186 Jy/beam ! Combined flux in latest and established models = 0.152763 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 130 components and 0.152763 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9136 mas, bmaj=1.773 mas, bpa=15.78 degrees ! Estimated noise=0.218807 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000234227 Jy ! Component: 100 - total flux cleaned = -0.000234696 Jy ! Component: 150 - total flux cleaned = -0.00023461 Jy ! Component: 200 - total flux cleaned = -0.00019609 Jy ! Total flux subtracted in 200 components = -0.00019609 Jy ! Clean residual min=-0.000740 max=0.000752 Jy/beam ! Clean residual mean=0.000000 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.152567 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 143 components and 0.152567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057427Jy sigma=0.852802 ! Fit after self-cal, rms=0.057409Jy sigma=0.852589 wmodel J1723+6547_X_map.mod ! Writing 143 model components to file: J1723+6547_X_map.mod wobs J1723+6547_X_uvs.fits ! Writing UV FITS file: J1723+6547_X_uvs.fits wwins J1723+6547_X_map.win ! wwins: Wrote 7 windows to J1723+6547_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 7.38075e-05 Jy ! Component: 100 - total flux cleaned = 0.000166594 Jy ! Component: 150 - total flux cleaned = 0.000191933 Jy ! Component: 200 - total flux cleaned = 0.000179425 Jy ! Component: 250 - total flux cleaned = 0.000167399 Jy ! Component: 300 - total flux cleaned = 0.000143787 Jy ! Component: 350 - total flux cleaned = 0.000143828 Jy ! Component: 400 - total flux cleaned = 0.000155221 Jy ! Component: 450 - total flux cleaned = 0.000166474 Jy ! Component: 500 - total flux cleaned = 0.000210618 Jy ! Component: 550 - total flux cleaned = 0.000210581 Jy ! Component: 600 - total flux cleaned = 0.000232101 Jy ! Component: 650 - total flux cleaned = 0.000253372 Jy ! Component: 700 - total flux cleaned = 0.000295546 Jy ! Component: 750 - total flux cleaned = 0.000274813 Jy ! Component: 800 - total flux cleaned = 0.000316211 Jy ! Component: 850 - total flux cleaned = 0.000305971 Jy ! Component: 900 - total flux cleaned = 0.000316198 Jy ! Component: 950 - total flux cleaned = 0.000336088 Jy ! Component: 1000 - total flux cleaned = 0.000296471 Jy ! Component: 1050 - total flux cleaned = 0.000276917 Jy ! Component: 1100 - total flux cleaned = 0.000276873 Jy ! Component: 1150 - total flux cleaned = 0.000238296 Jy ! Component: 1200 - total flux cleaned = 0.000228761 Jy ! Component: 1250 - total flux cleaned = 0.000228783 Jy ! Component: 1300 - total flux cleaned = 0.000209924 Jy ! Component: 1350 - total flux cleaned = 0.000219195 Jy ! Component: 1400 - total flux cleaned = 0.000228514 Jy ! Component: 1450 - total flux cleaned = 0.000210101 Jy ! Component: 1500 - total flux cleaned = 0.000201039 Jy ! Component: 1550 - total flux cleaned = 0.000191982 Jy ! Component: 1600 - total flux cleaned = 0.000201015 Jy ! Component: 1650 - total flux cleaned = 0.000183097 Jy ! Component: 1700 - total flux cleaned = 0.000156321 Jy ! Component: 1750 - total flux cleaned = 0.000174166 Jy ! Component: 1800 - total flux cleaned = 0.000156609 Jy ! Component: 1850 - total flux cleaned = 0.000156616 Jy ! Component: 1900 - total flux cleaned = 0.000165345 Jy ! Component: 1950 - total flux cleaned = 0.000156647 Jy ! Component: 2000 - total flux cleaned = 0.000148003 Jy ! Component: 2050 - total flux cleaned = 0.0001651 Jy ! Component: 2100 - total flux cleaned = 0.000156528 Jy ! Component: 2150 - total flux cleaned = 0.00013965 Jy ! Component: 2200 - total flux cleaned = 0.00011439 Jy ! Component: 2250 - total flux cleaned = 9.77272e-05 Jy ! Component: 2300 - total flux cleaned = 0.000106001 Jy ! Component: 2350 - total flux cleaned = 0.000122596 Jy ! Component: 2400 - total flux cleaned = 9.79125e-05 Jy ! Component: 2450 - total flux cleaned = 7.33297e-05 Jy ! Component: 2500 - total flux cleaned = 4.88681e-05 Jy ! Component: 2550 - total flux cleaned = 5.69533e-05 Jy ! Component: 2600 - total flux cleaned = 4.8903e-05 Jy ! Component: 2650 - total flux cleaned = 4.08512e-05 Jy ! Component: 2700 - total flux cleaned = 3.28363e-05 Jy ! Component: 2750 - total flux cleaned = 2.48929e-05 Jy ! Component: 2800 - total flux cleaned = 4.86495e-05 Jy ! Component: 2850 - total flux cleaned = 7.22719e-05 Jy ! Component: 2900 - total flux cleaned = 7.22279e-05 Jy ! Component: 2950 - total flux cleaned = 6.43813e-05 Jy ! Component: 3000 - total flux cleaned = 7.99097e-05 Jy ! Component: 3050 - total flux cleaned = 6.43539e-05 Jy ! Component: 3100 - total flux cleaned = 7.96669e-05 Jy ! Component: 3150 - total flux cleaned = 5.66577e-05 Jy ! Component: 3200 - total flux cleaned = 5.67018e-05 Jy ! Component: 3250 - total flux cleaned = 7.19119e-05 Jy ! Component: 3300 - total flux cleaned = 0.000117325 Jy ! Component: 3350 - total flux cleaned = 7.95768e-05 Jy ! Component: 3400 - total flux cleaned = 0.000117175 Jy ! Component: 3450 - total flux cleaned = 0.000102241 Jy ! Component: 3500 - total flux cleaned = 0.000117103 Jy ! Component: 3550 - total flux cleaned = 8.00662e-05 Jy ! Component: 3600 - total flux cleaned = 8.006e-05 Jy ! Component: 3650 - total flux cleaned = 7.27379e-05 Jy ! Component: 3700 - total flux cleaned = 0.000102057 Jy ! Component: 3750 - total flux cleaned = 0.0001166 Jy ! Component: 3800 - total flux cleaned = 0.000116583 Jy ! Component: 3850 - total flux cleaned = 0.000116546 Jy ! Component: 3900 - total flux cleaned = 0.000159722 Jy ! Component: 3950 - total flux cleaned = 0.000181242 Jy ! Component: 4000 - total flux cleaned = 0.00017408 Jy ! Component: 4050 - total flux cleaned = 0.000223935 Jy ! Total flux subtracted in 4096 components = 0.00021681 Jy ! Clean residual min=-0.000505 max=0.000427 Jy/beam ! Clean residual mean=-0.000000 rms=0.000120 Jy/beam ! Combined flux in latest and established models = 0.152784 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 460 components and 0.152784 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/temp_maps//J1723+6547_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9136 x 1.773 at 15.78 degrees (North through East) ! Clean map min=-0.00091086 max=0.10429 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/temp_maps//J1723+6547_X_map.fits wmodel /vlbi/bp222/temp_maps//J1723+6547_X_map.mod ! Writing 460 model components to file: /vlbi/bp222/temp_maps//J1723+6547_X_map.mod wobs /vlbi/bp222/temp_maps//J1723+6547_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/temp_maps//J1723+6547_X_uvs.fits wwins /vlbi/bp222/temp_maps//J1723+6547_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/temp_maps//J1723+6547_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.104294 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000120368 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.346238 0.346238 0.692476 1.38495 2.7699 5.53981 11.0796 22.1592 44.3185 88.6369 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.104 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 866.456 quit ! Quitting program ! Log file /vlbi/bp222/temp_maps//J1723+6547_X_dfm.log closed on Thu Feb 14 23:04:55 2019