! Started logfile: J1722+6105_S_dfm.log on Fri Feb 15 19:56:48 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     J1722+6105_S_uvm.fits
! Reading UV FITS file: J1722+6105_S_uvm.fits
! AN table 1: 23 integrations on 28 of 28 possible baselines.
! AN table 2: 67 integrations on 36 of 36 possible baselines.
! AN table 3: 24 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.872449 visibilities/baseline/integration-bin.
! Found source: J1722+6105
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 13680 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1722+6105_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 60 telescope corrections were flagged in sub-array 2.
!  A total of 6 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 60 telescope corrections were flagged in sub-array 2.
!  A total of 6 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  A total of 60 telescope corrections were flagged in sub-array 2.
!  A total of 6 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 97 telescope corrections were flagged in sub-array 1.
!  A total of 372 telescope corrections were flagged in sub-array 2.
!  A total of 216 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.048543Jy  sigma=14.913493
! Fit after  self-cal, rms=0.746310Jy  sigma=10.608138
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
sele I,1,3
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: (none)
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.662 mas, bmaj=6.241 mas, bpa=14.56 degrees
! Estimated noise=0.730304 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.203578 Jy
! Component: 100  -  total flux cleaned = 0.247989 Jy
! Total flux subtracted in 100 components = 0.247989 Jy
! Clean residual min=-0.008363 max=0.012901 Jy/beam
! Clean residual mean=0.000010 rms=0.002030 Jy/beam
! Combined flux in latest and established models = 0.247989 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.247989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.088024Jy  sigma=1.067227
! Fit after  self-cal, rms=0.088018Jy  sigma=1.067183
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0142954 Jy
! Component: 100  -  total flux cleaned = 0.0228909 Jy
! Total flux subtracted in 100 components = 0.0228909 Jy
! Clean residual min=-0.007916 max=0.006974 Jy/beam
! Clean residual mean=0.000007 rms=0.001808 Jy/beam
! Combined flux in latest and established models = 0.27088 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 20 components and 0.27088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.084889Jy  sigma=1.015988
! Fit after  self-cal, rms=0.084879Jy  sigma=1.015720
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.271 mas, bmaj=7.032 mas, bpa=15.58 degrees
! Estimated noise=0.5193 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0082031 Jy
! Component: 100  -  total flux cleaned = 0.00975425 Jy
! Component: 150  -  total flux cleaned = 0.0101836 Jy
! Component: 200  -  total flux cleaned = 0.010527 Jy
! Total flux subtracted in 200 components = 0.010527 Jy
! Clean residual min=-0.007343 max=0.006413 Jy/beam
! Clean residual mean=0.000003 rms=0.001832 Jy/beam
! Combined flux in latest and established models = 0.281407 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 34 components and 0.281407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.083785Jy  sigma=1.005931
! Fit after  self-cal, rms=0.083787Jy  sigma=1.005883
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.271 x 7.032 at 15.58 degrees (North through East)
! Clean map  min=-0.0071733  max=0.26487 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.10     HN        1.12     KP        1.11     
!   MK        1.09     NL        0.98     OV        1.15     SC        1.06     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     FD        0.99     KP        1.01     LA        1.00     
!   MK        0.96     NL        0.94     OV        1.00     PT        0.98     
!   SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.97     HN        1.05     KP        0.99     LA        0.93     
!   MK        1.06     NL        1.07     OV        0.99     PT        1.01     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        1.06     HN        1.16     KP        1.11     
!   MK        1.10     NL        0.70     OV        1.13     SC        0.77     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     FD        1.00     KP        0.99     LA        1.02     
!   MK        0.93     NL        1.49     OV        0.99     PT        0.98     
!   SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.53     HN        1.02     KP        0.96     LA        0.93     
!   MK        1.08     NL        0.96     OV        1.03     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.08     HN        1.14     KP        1.11     
!   MK        1.12     NL        0.93     OV        1.14     SC        1.05     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     FD        0.99     KP        0.95     LA        0.94     
!   MK        0.95     NL        1.12     OV        0.98     PT        0.99     
!   SC        1.06     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.76     HN        1.04     KP        0.97     LA        0.94     
!   MK        1.09     NL        1.00     OV        1.02     PT        1.03     
!   SC        1.02     
! 
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.083787Jy  sigma=1.005883
! Fit after  self-cal, rms=0.071714Jy  sigma=0.828254
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.294 mas, bmaj=7.016 mas, bpa=15.52 degrees
! Estimated noise=0.518319 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000105334 Jy
! Component: 100  -  total flux cleaned = -0.000106821 Jy
! Component: 150  -  total flux cleaned = -0.000216361 Jy
! Component: 200  -  total flux cleaned = -0.000313325 Jy
! Total flux subtracted in 200 components = -0.000313325 Jy
! Clean residual min=-0.003207 max=0.003002 Jy/beam
! Clean residual mean=-0.000010 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.281094 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 44 components and 0.281094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.071536Jy  sigma=0.827479
! Fit after  self-cal, rms=0.071640Jy  sigma=0.826619
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.071640Jy  sigma=0.826619
! Fit after  self-cal, rms=0.070269Jy  sigma=0.801994
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.296 mas, bmaj=7.062 mas, bpa=15.77 degrees
! Estimated noise=0.521802 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000161885 Jy
! Component: 100  -  total flux cleaned = -9.45199e-05 Jy
! Component: 150  -  total flux cleaned = -0.000136042 Jy
! Component: 200  -  total flux cleaned = -0.000103876 Jy
! Total flux subtracted in 200 components = -0.000103876 Jy
! Clean residual min=-0.002341 max=0.001997 Jy/beam
! Clean residual mean=-0.000009 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.28099 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 51 components and 0.28099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.070186Jy  sigma=0.801107
! Fit after  self-cal, rms=0.070218Jy  sigma=0.801062
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.62453e-05 Jy
! Component: 100  -  total flux cleaned = 6.0583e-05 Jy
! Component: 150  -  total flux cleaned = 8.27858e-05 Jy
! Component: 200  -  total flux cleaned = 0.00010326 Jy
! Total flux subtracted in 200 components = 0.00010326 Jy
! Clean residual min=-0.002333 max=0.002029 Jy/beam
! Clean residual mean=-0.000009 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.281093 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 58 components and 0.281093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.070202Jy  sigma=0.800821
! Fit after  self-cal, rms=0.070202Jy  sigma=0.800812
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.070202Jy  sigma=0.800812
! Fit after  self-cal, rms=0.069977Jy  sigma=0.786104
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.294 mas, bmaj=7.076 mas, bpa=15.7 degrees
! Estimated noise=0.521809 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000241956 Jy
! Component: 100  -  total flux cleaned = -0.000271619 Jy
! Component: 150  -  total flux cleaned = -0.000271082 Jy
! Component: 200  -  total flux cleaned = -0.000292568 Jy
! Total flux subtracted in 200 components = -0.000292568 Jy
! Clean residual min=-0.001789 max=0.001742 Jy/beam
! Clean residual mean=-0.000008 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.280801 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 61 components and 0.280801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.069960Jy  sigma=0.785789
! Fit after  self-cal, rms=0.069965Jy  sigma=0.785760
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.44571e-05 Jy
! Component: 100  -  total flux cleaned = -2.52716e-05 Jy
! Component: 150  -  total flux cleaned = -4.30333e-05 Jy
! Component: 200  -  total flux cleaned = -7.42953e-05 Jy
! Total flux subtracted in 200 components = -7.42953e-05 Jy
! Clean residual min=-0.001769 max=0.001733 Jy/beam
! Clean residual mean=-0.000008 rms=0.000398 Jy/beam
! Combined flux in latest and established models = 0.280726 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 63 components and 0.280726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.069956Jy  sigma=0.785634
! Fit after  self-cal, rms=0.069956Jy  sigma=0.785631
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.069956Jy  sigma=0.785631
! Fit after  self-cal, rms=0.070253Jy  sigma=0.785568
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.585 mas, bmaj=10.69 mas, bpa=20.65 degrees
! Estimated noise=0.633067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000130241 Jy
! Component: 100  -  total flux cleaned = -0.000131509 Jy
! Component: 150  -  total flux cleaned = -0.00012472 Jy
! Component: 200  -  total flux cleaned = -0.000117995 Jy
! Total flux subtracted in 200 components = -0.000117995 Jy
! Clean residual min=-0.001781 max=0.001724 Jy/beam
! Clean residual mean=-0.000019 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.280608 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 64 components and 0.280608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.070256Jy  sigma=0.785552
! Fit after  self-cal, rms=0.070261Jy  sigma=0.785544
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.25646e-06 Jy
! Component: 100  -  total flux cleaned = 3.51412e-06 Jy
! Component: 150  -  total flux cleaned = 9.63766e-06 Jy
! Component: 200  -  total flux cleaned = 2.10997e-05 Jy
! Total flux subtracted in 200 components = 2.10997e-05 Jy
! Clean residual min=-0.001774 max=0.001723 Jy/beam
! Clean residual mean=-0.000019 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.280629 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 71 components and 0.280629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.070264Jy  sigma=0.785563
! Fit after  self-cal, rms=0.070266Jy  sigma=0.785555
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.296 mas, bmaj=7.085 mas, bpa=15.69 degrees
! Estimated noise=0.521917 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.296 x 7.085 at 15.69 degrees (North through East)
! Clean map  min=-0.001697  max=0.26635 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.663 mas, bmaj=6.248 mas, bpa=14.09 degrees
! Estimated noise=0.743687 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.206853 Jy
! Component: 100  -  total flux cleaned = 0.251976 Jy
! Component: 150  -  total flux cleaned = 0.264971 Jy
! Component: 200  -  total flux cleaned = 0.271534 Jy
! Total flux subtracted in 200 components = 0.271534 Jy
! Clean residual min=-0.002533 max=0.003542 Jy/beam
! Clean residual mean=-0.000004 rms=0.000693 Jy/beam
! Combined flux in latest and established models = 0.271534 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.271534 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.296 mas, bmaj=7.085 mas, bpa=15.69 degrees
! Estimated noise=0.521917 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.5, -1.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00471416 Jy
! Component: 100  -  total flux cleaned = 0.00723074 Jy
! Component: 150  -  total flux cleaned = 0.00846209 Jy
! Component: 200  -  total flux cleaned = 0.00881726 Jy
! Total flux subtracted in 200 components = 0.00881726 Jy
! Clean residual min=-0.001697 max=0.001611 Jy/beam
! Clean residual mean=-0.000008 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.280351 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 39 components and 0.280351 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.585 mas, bmaj=10.69 mas, bpa=20.65 degrees
! Estimated noise=0.633067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000562781 Jy
! Component: 100  -  total flux cleaned = 0.000736258 Jy
! Component: 150  -  total flux cleaned = 0.000814197 Jy
! Component: 200  -  total flux cleaned = 0.00081374 Jy
! Total flux subtracted in 200 components = 0.00081374 Jy
! Clean residual min=-0.001846 max=0.001546 Jy/beam
! Clean residual mean=-0.000017 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.281165 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.59476e-06 Jy
! Component: 100  -  total flux cleaned = 9.55696e-06 Jy
! Component: 150  -  total flux cleaned = 2.49508e-05 Jy
! Component: 200  -  total flux cleaned = 3.21898e-05 Jy
! Total flux subtracted in 200 components = 3.21898e-05 Jy
! Clean residual min=-0.001842 max=0.001528 Jy/beam
! Clean residual mean=-0.000017 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.281197 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 71 components and 0.281197 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.296 mas, bmaj=7.085 mas, bpa=15.69 degrees
! Estimated noise=0.521917 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00023032 Jy
! Component: 100  -  total flux cleaned = -0.000251183 Jy
! Component: 150  -  total flux cleaned = -0.000233751 Jy
! Component: 200  -  total flux cleaned = -0.000202766 Jy
! Total flux subtracted in 200 components = -0.000202766 Jy
! Clean residual min=-0.001686 max=0.001540 Jy/beam
! Clean residual mean=-0.000008 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.280994 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 81 components and 0.280994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.070237Jy  sigma=0.784914
! Fit after  self-cal, rms=0.070237Jy  sigma=0.784855
wmodel J1722+6105_S_map.mod
! Writing 81 model components to file: J1722+6105_S_map.mod
wobs   J1722+6105_S_uvs.fits
! Writing UV FITS file: J1722+6105_S_uvs.fits
wwins  J1722+6105_S_map.win
! wwins: Wrote 2 windows to J1722+6105_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00062822 Jy
! Component: 100  -  total flux cleaned = -0.000999979 Jy
! Component: 150  -  total flux cleaned = -0.00142971 Jy
! Component: 200  -  total flux cleaned = -0.00181279 Jy
! Component: 250  -  total flux cleaned = -0.00213219 Jy
! Component: 300  -  total flux cleaned = -0.00239356 Jy
! Component: 350  -  total flux cleaned = -0.00257787 Jy
! Component: 400  -  total flux cleaned = -0.00271344 Jy
! Component: 450  -  total flux cleaned = -0.00284567 Jy
! Component: 500  -  total flux cleaned = -0.00295347 Jy
! Component: 550  -  total flux cleaned = -0.00305917 Jy
! Component: 600  -  total flux cleaned = -0.00312135 Jy
! Component: 650  -  total flux cleaned = -0.00320251 Jy
! Component: 700  -  total flux cleaned = -0.0032219 Jy
! Component: 750  -  total flux cleaned = -0.00322156 Jy
! Component: 800  -  total flux cleaned = -0.00320212 Jy
! Component: 850  -  total flux cleaned = -0.00320232 Jy
! Component: 900  -  total flux cleaned = -0.00320243 Jy
! Component: 950  -  total flux cleaned = -0.00323969 Jy
! Component: 1000  -  total flux cleaned = -0.00329464 Jy
! Component: 1050  -  total flux cleaned = -0.0032768 Jy
! Component: 1100  -  total flux cleaned = -0.0033306 Jy
! Component: 1150  -  total flux cleaned = -0.00343634 Jy
! Component: 1200  -  total flux cleaned = -0.00348857 Jy
! Component: 1250  -  total flux cleaned = -0.00354026 Jy
! Component: 1300  -  total flux cleaned = -0.00362554 Jy
! Component: 1350  -  total flux cleaned = -0.00369322 Jy
! Component: 1400  -  total flux cleaned = -0.00369334 Jy
! Component: 1450  -  total flux cleaned = -0.00374295 Jy
! Component: 1500  -  total flux cleaned = -0.00379203 Jy
! Component: 1550  -  total flux cleaned = -0.00379192 Jy
! Component: 1600  -  total flux cleaned = -0.00385648 Jy
! Component: 1650  -  total flux cleaned = -0.00382462 Jy
! Component: 1700  -  total flux cleaned = -0.00387203 Jy
! Component: 1750  -  total flux cleaned = -0.00391922 Jy
! Component: 1800  -  total flux cleaned = -0.00402755 Jy
! Component: 1850  -  total flux cleaned = -0.00396594 Jy
! Component: 1900  -  total flux cleaned = -0.00398137 Jy
! Component: 1950  -  total flux cleaned = -0.00401165 Jy
! Component: 2000  -  total flux cleaned = -0.00407166 Jy
! Component: 2050  -  total flux cleaned = -0.00410128 Jy
! Component: 2100  -  total flux cleaned = -0.00410128 Jy
! Component: 2150  -  total flux cleaned = -0.00414518 Jy
! Component: 2200  -  total flux cleaned = -0.00410191 Jy
! Component: 2250  -  total flux cleaned = -0.00417401 Jy
! Component: 2300  -  total flux cleaned = -0.00411682 Jy
! Component: 2350  -  total flux cleaned = -0.0041455 Jy
! Component: 2400  -  total flux cleaned = -0.0041596 Jy
! Component: 2450  -  total flux cleaned = -0.0041596 Jy
! Component: 2500  -  total flux cleaned = -0.00422905 Jy
! Component: 2550  -  total flux cleaned = -0.0042015 Jy
! Component: 2600  -  total flux cleaned = -0.00422875 Jy
! Component: 2650  -  total flux cleaned = -0.00418796 Jy
! Component: 2700  -  total flux cleaned = -0.00422842 Jy
! Component: 2750  -  total flux cleaned = -0.00418837 Jy
! Component: 2800  -  total flux cleaned = -0.00422832 Jy
! Component: 2850  -  total flux cleaned = -0.0042152 Jy
! Component: 2900  -  total flux cleaned = -0.00420217 Jy
! Component: 2950  -  total flux cleaned = -0.00415017 Jy
! Component: 3000  -  total flux cleaned = -0.00416314 Jy
! Component: 3050  -  total flux cleaned = -0.00420166 Jy
! Component: 3100  -  total flux cleaned = -0.00421438 Jy
! Component: 3150  -  total flux cleaned = -0.00417647 Jy
! Component: 3200  -  total flux cleaned = -0.00422678 Jy
! Component: 3250  -  total flux cleaned = -0.00420183 Jy
! Component: 3300  -  total flux cleaned = -0.00420191 Jy
! Component: 3350  -  total flux cleaned = -0.00425121 Jy
! Component: 3400  -  total flux cleaned = -0.00420201 Jy
! Component: 3450  -  total flux cleaned = -0.00418977 Jy
! Component: 3500  -  total flux cleaned = -0.00415344 Jy
! Component: 3550  -  total flux cleaned = -0.00420161 Jy
! Component: 3600  -  total flux cleaned = -0.00418975 Jy
! Component: 3650  -  total flux cleaned = -0.00418964 Jy
! Component: 3700  -  total flux cleaned = -0.00421329 Jy
! Component: 3750  -  total flux cleaned = -0.00416622 Jy
! Component: 3800  -  total flux cleaned = -0.00415461 Jy
! Component: 3850  -  total flux cleaned = -0.00415456 Jy
! Component: 3900  -  total flux cleaned = -0.00416619 Jy
! Component: 3950  -  total flux cleaned = -0.00417772 Jy
! Component: 4000  -  total flux cleaned = -0.0041434 Jy
! Component: 4050  -  total flux cleaned = -0.0040979 Jy
! Total flux subtracted in 4096 components = -0.00407536 Jy
! Clean residual min=-0.000616 max=0.000766 Jy/beam
! Clean residual mean=-0.000004 rms=0.000208 Jy/beam
! Combined flux in latest and established models = 0.276919 Jy
keep
! Adding 307 model components to the UV plane model.
! The established model now contains 388 components and 0.276919 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   J1722+6105_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.296 x 7.085 at 15.69 degrees (North through East)
! Clean map  min=-0.0014194  max=0.26673 Jy/beam
! Writing clean map to FITS file: J1722+6105_S_map.fits
wmodel J1722+6105_S_map.mod
! Writing 388 model components to file: J1722+6105_S_map.mod
wobs   J1722+6105_S_uvs.fits
! Writing UV FITS file: J1722+6105_S_uvs.fits
wwins  J1722+6105_S_map.win
! wwins: Wrote 3 windows to J1722+6105_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.26673 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000207449 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.233324 0.233324 0.466649 0.933297 1.86659 3.73319 7.46638 14.9328 29.8655 59.731
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.266 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1285.76 
quit
! Quitting program
! Log file J1722+6105_S_dfm.log closed on Fri Feb 15 19:56:52 2019