! Started logfile: J1700+0522_S_dfm.log on Fri Feb 15 19:56:43 2019
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     J1700+0522_S_uvm.fits
! Reading UV FITS file: J1700+0522_S_uvm.fits
! AN table 1: 22 integrations on 28 of 28 possible baselines.
! AN table 2: 69 integrations on 36 of 36 possible baselines.
! AN table 3: 24 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.961005 visibilities/baseline/integration-bin.
! Found source: J1700+0522
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 44 lines of history.
! 
! Reading 16068 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1700+0522_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
!  A total of 3 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
!  A total of 3 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
!  A total of 3 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 92 telescope corrections were flagged in sub-array 1.
!  A total of 345 telescope corrections were flagged in sub-array 2.
!  A total of 240 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.008891Jy  sigma=16.496508
! Fit after  self-cal, rms=0.863861Jy  sigma=13.903292
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
sele I,1,3
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..3
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: (none)
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.672 mas, bmaj=6.916 mas, bpa=-0.9534 degrees
! Estimated noise=0.609648 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110153 Jy
! Component: 100  -  total flux cleaned = 0.136517 Jy
! Total flux subtracted in 100 components = 0.136517 Jy
! Clean residual min=-0.004557 max=0.010045 Jy/beam
! Clean residual mean=0.000012 rms=0.001246 Jy/beam
! Combined flux in latest and established models = 0.136517 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.136517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.069659Jy  sigma=0.951417
! Fit after  self-cal, rms=0.069682Jy  sigma=0.951137
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103378 Jy
! Component: 100  -  total flux cleaned = 0.0152105 Jy
! Total flux subtracted in 100 components = 0.0152105 Jy
! Clean residual min=-0.004072 max=0.005464 Jy/beam
! Clean residual mean=0.000007 rms=0.000989 Jy/beam
! Combined flux in latest and established models = 0.151728 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 0.151728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.068265Jy  sigma=0.910340
! Fit after  self-cal, rms=0.068281Jy  sigma=0.910172
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.315 mas, bmaj=8.178 mas, bpa=-0.9254 degrees
! Estimated noise=0.411205 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.5, -10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00510287 Jy
! Component: 100  -  total flux cleaned = 0.00703702 Jy
! Component: 150  -  total flux cleaned = 0.00779818 Jy
! Component: 200  -  total flux cleaned = 0.00821167 Jy
! Total flux subtracted in 200 components = 0.00821167 Jy
! Clean residual min=-0.003430 max=0.004843 Jy/beam
! Clean residual mean=0.000009 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.159939 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 41 components and 0.159939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.067760Jy  sigma=0.902054
! Fit after  self-cal, rms=0.067763Jy  sigma=0.901480
! Inverting map 
! Added new window around map position (-14, -65).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000794071 Jy
! Component: 100  -  total flux cleaned = -1.3567e-05 Jy
! Component: 150  -  total flux cleaned = -0.0002326 Jy
! Component: 200  -  total flux cleaned = -4.88561e-05 Jy
! Total flux subtracted in 200 components = -4.88561e-05 Jy
! Clean residual min=-0.003236 max=0.003625 Jy/beam
! Clean residual mean=0.000008 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.15989 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 59 components and 0.15989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.067094Jy  sigma=0.895422
! Fit after  self-cal, rms=0.067071Jy  sigma=0.894844
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.315 x 8.178 at -0.9254 degrees (North through East)
! Clean map  min=-0.0036331  max=0.14264 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.49     FD        1.00     HN        1.12     KP        1.03     
!   MK        1.09     NL        0.99     OV        1.09     SC        1.09     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     FD        0.99     KP        1.01     LA        1.00     
!   MK        0.99     NL        0.97     OV        0.99     PT        1.00     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.62     FD        1.01     HN        0.98     KP        0.91     
!   LA        0.93     MK        1.07     NL        1.05     OV        0.97     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.74     FD        1.02     HN        1.11     KP        1.07     
!   MK        1.09     NL        0.81     OV        1.06     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.82     FD        1.01     KP        1.02     LA        0.98     
!   MK        0.97     NL        1.01     OV        1.00     PT        1.00     
!   SC        0.92     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.65     FD        0.99     HN        0.98     KP        0.91     
!   LA        0.95     MK        1.03     NL        0.95     OV        0.97     
!   PT        0.95     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.60     FD        1.03     HN        1.14     KP        1.06     
!   MK        1.09     NL        0.90     OV        1.06     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.93     FD        1.01     KP        0.99     LA        1.02     
!   MK        0.99     NL        1.08     OV        1.02     PT        1.00     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.56     FD        0.98     HN        0.96     KP        0.94     
!   LA        0.91     MK        1.02     NL        0.97     OV        0.96     
!   PT        0.98     SC        0.92     
! 
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.067071Jy  sigma=0.894844
! Fit after  self-cal, rms=0.074160Jy  sigma=0.864440
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.324 mas, bmaj=8.243 mas, bpa=-0.9643 degrees
! Estimated noise=0.413307 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00084364 Jy
! Component: 100  -  total flux cleaned = 0.000950765 Jy
! Component: 150  -  total flux cleaned = 0.00108174 Jy
! Component: 200  -  total flux cleaned = 0.00125916 Jy
! Total flux subtracted in 200 components = 0.00125916 Jy
! Clean residual min=-0.001623 max=0.001686 Jy/beam
! Clean residual mean=0.000003 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.16115 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 79 components and 0.161149 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.074121Jy  sigma=0.863731
! Fit after  self-cal, rms=0.074260Jy  sigma=0.863436
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.074260Jy  sigma=0.863436
! Fit after  self-cal, rms=0.074776Jy  sigma=0.862315
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.323 mas, bmaj=8.245 mas, bpa=-0.927 degrees
! Estimated noise=0.413417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000440082 Jy
! Component: 100  -  total flux cleaned = 0.000553137 Jy
! Component: 150  -  total flux cleaned = 0.000632032 Jy
! Component: 200  -  total flux cleaned = 0.000680356 Jy
! Total flux subtracted in 200 components = 0.000680356 Jy
! Clean residual min=-0.001564 max=0.001663 Jy/beam
! Clean residual mean=0.000003 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.16183 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 90 components and 0.16183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.074752Jy  sigma=0.861990
! Fit after  self-cal, rms=0.074759Jy  sigma=0.861978
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-111, -37.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000665538 Jy
! Component: 100  -  total flux cleaned = 0.000554108 Jy
! Component: 150  -  total flux cleaned = 0.000643862 Jy
! Component: 200  -  total flux cleaned = 0.000857707 Jy
! Total flux subtracted in 200 components = 0.000857707 Jy
! Clean residual min=-0.001597 max=0.001515 Jy/beam
! Clean residual mean=0.000003 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.162688 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 102 components and 0.162688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.074706Jy  sigma=0.861287
! Fit after  self-cal, rms=0.074710Jy  sigma=0.861254
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.074710Jy  sigma=0.861254
! Fit after  self-cal, rms=0.074218Jy  sigma=0.857142
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.322 mas, bmaj=8.241 mas, bpa=-0.8814 degrees
! Estimated noise=0.412311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.2033e-05 Jy
! Component: 100  -  total flux cleaned = 0.000232737 Jy
! Component: 150  -  total flux cleaned = 0.000376191 Jy
! Component: 200  -  total flux cleaned = 0.000488417 Jy
! Total flux subtracted in 200 components = 0.000488417 Jy
! Clean residual min=-0.001451 max=0.001384 Jy/beam
! Clean residual mean=0.000002 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.163176 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 120 components and 0.163176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.074195Jy  sigma=0.856905
! Fit after  self-cal, rms=0.074196Jy  sigma=0.856872
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.61082e-05 Jy
! Component: 100  -  total flux cleaned = 0.000149396 Jy
! Component: 150  -  total flux cleaned = 0.000189205 Jy
! Component: 200  -  total flux cleaned = 0.000246395 Jy
! Total flux subtracted in 200 components = 0.000246395 Jy
! Clean residual min=-0.001446 max=0.001370 Jy/beam
! Clean residual mean=0.000002 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.163422 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 127 components and 0.163422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.074181Jy  sigma=0.856725
! Fit after  self-cal, rms=0.074182Jy  sigma=0.856722
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.074182Jy  sigma=0.856722
! Fit after  self-cal, rms=0.074244Jy  sigma=0.856703
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.015 mas, bmaj=12.85 mas, bpa=2.998 degrees
! Estimated noise=0.482067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000343684 Jy
! Component: 100  -  total flux cleaned = 0.000448688 Jy
! Component: 150  -  total flux cleaned = 0.000494478 Jy
! Component: 200  -  total flux cleaned = 0.000466433 Jy
! Total flux subtracted in 200 components = 0.000466433 Jy
! Clean residual min=-0.001379 max=0.001559 Jy/beam
! Clean residual mean=0.000004 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.163889 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 143 components and 0.163889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.074238Jy  sigma=0.856624
! Fit after  self-cal, rms=0.074240Jy  sigma=0.856616
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000151196 Jy
! Component: 100  -  total flux cleaned = 0.000164308 Jy
! Component: 150  -  total flux cleaned = 0.000164372 Jy
! Component: 200  -  total flux cleaned = 0.000130992 Jy
! Total flux subtracted in 200 components = 0.000130992 Jy
! Clean residual min=-0.001361 max=0.001539 Jy/beam
! Clean residual mean=0.000004 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.16402 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 154 components and 0.16402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.074237Jy  sigma=0.856575
! Fit after  self-cal, rms=0.074238Jy  sigma=0.856571
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.321 mas, bmaj=8.239 mas, bpa=-0.8617 degrees
! Estimated noise=0.412089 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.321 x 8.239 at -0.8617 degrees (North through East)
! Clean map  min=-0.0016527  max=0.14286 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.678 mas, bmaj=6.965 mas, bpa=-0.9572 degrees
! Estimated noise=0.614249 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.11086 Jy
! Component: 100  -  total flux cleaned = 0.137461 Jy
! Component: 150  -  total flux cleaned = 0.147764 Jy
! Component: 200  -  total flux cleaned = 0.152846 Jy
! Total flux subtracted in 200 components = 0.152846 Jy
! Clean residual min=-0.002379 max=0.002652 Jy/beam
! Clean residual mean=0.000004 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.152846 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.152846 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.321 mas, bmaj=8.239 mas, bpa=-0.8617 degrees
! Estimated noise=0.412089 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00404037 Jy
! Component: 100  -  total flux cleaned = 0.00642356 Jy
! Component: 150  -  total flux cleaned = 0.00777694 Jy
! Component: 200  -  total flux cleaned = 0.00857725 Jy
! Total flux subtracted in 200 components = 0.00857725 Jy
! Clean residual min=-0.001722 max=0.001548 Jy/beam
! Clean residual mean=0.000005 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.161423 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 46 components and 0.161423 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.015 mas, bmaj=12.85 mas, bpa=2.998 degrees
! Estimated noise=0.482067 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135358 Jy
! Component: 100  -  total flux cleaned = 0.00188754 Jy
! Component: 150  -  total flux cleaned = 0.00198636 Jy
! Component: 200  -  total flux cleaned = 0.00210234 Jy
! Total flux subtracted in 200 components = 0.00210234 Jy
! Clean residual min=-0.001334 max=0.001442 Jy/beam
! Clean residual mean=0.000006 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.163525 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.1693e-05 Jy
! Component: 100  -  total flux cleaned = 7.54825e-05 Jy
! Component: 150  -  total flux cleaned = 5.41296e-05 Jy
! Component: 200  -  total flux cleaned = 7.45273e-05 Jy
! Total flux subtracted in 200 components = 7.45273e-05 Jy
! Clean residual min=-0.001324 max=0.001460 Jy/beam
! Clean residual mean=0.000006 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.1636 Jy
! Adding 66 model components to the UV plane model.
! The established model now contains 109 components and 0.1636 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.321 mas, bmaj=8.239 mas, bpa=-0.8617 degrees
! Estimated noise=0.412089 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000226207 Jy
! Component: 100  -  total flux cleaned = -8.49102e-05 Jy
! Component: 150  -  total flux cleaned = 8.94063e-06 Jy
! Component: 200  -  total flux cleaned = 0.000127912 Jy
! Total flux subtracted in 200 components = 0.000127912 Jy
! Clean residual min=-0.001394 max=0.001363 Jy/beam
! Clean residual mean=0.000003 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.163728 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 136 components and 0.163728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Not correcting unselected IF 4.
! 
! Fit before self-cal, rms=0.074335Jy  sigma=0.857077
! Fit after  self-cal, rms=0.074313Jy  sigma=0.857023
wmodel J1700+0522_S_map.mod
! Writing 136 model components to file: J1700+0522_S_map.mod
wobs   J1700+0522_S_uvs.fits
! Writing UV FITS file: J1700+0522_S_uvs.fits
wwins  J1700+0522_S_map.win
! wwins: Wrote 4 windows to J1700+0522_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000248671 Jy
! Component: 100  -  total flux cleaned = 0.000575301 Jy
! Component: 150  -  total flux cleaned = 0.000796493 Jy
! Component: 200  -  total flux cleaned = 0.00101066 Jy
! Component: 250  -  total flux cleaned = 0.0012188 Jy
! Component: 300  -  total flux cleaned = 0.00140174 Jy
! Component: 350  -  total flux cleaned = 0.0015412 Jy
! Component: 400  -  total flux cleaned = 0.00165834 Jy
! Component: 450  -  total flux cleaned = 0.00175406 Jy
! Component: 500  -  total flux cleaned = 0.00184838 Jy
! Component: 550  -  total flux cleaned = 0.00199715 Jy
! Component: 600  -  total flux cleaned = 0.00208862 Jy
! Component: 650  -  total flux cleaned = 0.00219714 Jy
! Component: 700  -  total flux cleaned = 0.0022687 Jy
! Component: 750  -  total flux cleaned = 0.00235695 Jy
! Component: 800  -  total flux cleaned = 0.00246149 Jy
! Component: 850  -  total flux cleaned = 0.00253044 Jy
! Component: 900  -  total flux cleaned = 0.00261543 Jy
! Component: 950  -  total flux cleaned = 0.00268249 Jy
! Component: 1000  -  total flux cleaned = 0.00273251 Jy
! Component: 1050  -  total flux cleaned = 0.00284784 Jy
! Component: 1100  -  total flux cleaned = 0.00292933 Jy
! Component: 1150  -  total flux cleaned = 0.00299407 Jy
! Component: 1200  -  total flux cleaned = 0.00309032 Jy
! Component: 1250  -  total flux cleaned = 0.0031539 Jy
! Component: 1300  -  total flux cleaned = 0.00318565 Jy
! Component: 1350  -  total flux cleaned = 0.00329523 Jy
! Component: 1400  -  total flux cleaned = 0.00334186 Jy
! Component: 1450  -  total flux cleaned = 0.00341881 Jy
! Component: 1500  -  total flux cleaned = 0.00346454 Jy
! Component: 1550  -  total flux cleaned = 0.00355516 Jy
! Component: 1600  -  total flux cleaned = 0.0036 Jy
! Component: 1650  -  total flux cleaned = 0.00362977 Jy
! Component: 1700  -  total flux cleaned = 0.00370378 Jy
! Component: 1750  -  total flux cleaned = 0.00374762 Jy
! Component: 1800  -  total flux cleaned = 0.00380583 Jy
! Component: 1850  -  total flux cleaned = 0.00389227 Jy
! Component: 1900  -  total flux cleaned = 0.00396365 Jy
! Component: 1950  -  total flux cleaned = 0.00397787 Jy
! Component: 2000  -  total flux cleaned = 0.00406244 Jy
! Component: 2050  -  total flux cleaned = 0.0040345 Jy
! Component: 2100  -  total flux cleaned = 0.00409015 Jy
! Component: 2150  -  total flux cleaned = 0.00417282 Jy
! Component: 2200  -  total flux cleaned = 0.0042002 Jy
! Component: 2250  -  total flux cleaned = 0.00425467 Jy
! Component: 2300  -  total flux cleaned = 0.00429527 Jy
! Component: 2350  -  total flux cleaned = 0.00436232 Jy
! Component: 2400  -  total flux cleaned = 0.0044156 Jy
! Component: 2450  -  total flux cleaned = 0.0044289 Jy
! Component: 2500  -  total flux cleaned = 0.00448167 Jy
! Component: 2550  -  total flux cleaned = 0.004534 Jy
! Component: 2600  -  total flux cleaned = 0.00462495 Jy
! Component: 2650  -  total flux cleaned = 0.00462511 Jy
! Component: 2700  -  total flux cleaned = 0.00471502 Jy
! Component: 2750  -  total flux cleaned = 0.00477888 Jy
! Component: 2800  -  total flux cleaned = 0.00477886 Jy
! Component: 2850  -  total flux cleaned = 0.00486714 Jy
! Component: 2900  -  total flux cleaned = 0.00490472 Jy
! Component: 2950  -  total flux cleaned = 0.00496704 Jy
! Component: 3000  -  total flux cleaned = 0.00501661 Jy
! Component: 3050  -  total flux cleaned = 0.00509039 Jy
! Component: 3100  -  total flux cleaned = 0.00509051 Jy
! Component: 3150  -  total flux cleaned = 0.00520001 Jy
! Component: 3200  -  total flux cleaned = 0.00521207 Jy
! Component: 3250  -  total flux cleaned = 0.00522426 Jy
! Component: 3300  -  total flux cleaned = 0.00528418 Jy
! Component: 3350  -  total flux cleaned = 0.00531991 Jy
! Component: 3400  -  total flux cleaned = 0.00535537 Jy
! Component: 3450  -  total flux cleaned = 0.00535536 Jy
! Component: 3500  -  total flux cleaned = 0.00542557 Jy
! Component: 3550  -  total flux cleaned = 0.00542553 Jy
! Component: 3600  -  total flux cleaned = 0.00546021 Jy
! Component: 3650  -  total flux cleaned = 0.00549466 Jy
! Component: 3700  -  total flux cleaned = 0.00552897 Jy
! Component: 3750  -  total flux cleaned = 0.00557449 Jy
! Component: 3800  -  total flux cleaned = 0.00563111 Jy
! Component: 3850  -  total flux cleaned = 0.00566491 Jy
! Component: 3900  -  total flux cleaned = 0.00568721 Jy
! Component: 3950  -  total flux cleaned = 0.00567608 Jy
! Component: 4000  -  total flux cleaned = 0.00570935 Jy
! Component: 4050  -  total flux cleaned = 0.00576455 Jy
! Total flux subtracted in 4096 components = 0.00581941 Jy
! Clean residual min=-0.000923 max=0.000735 Jy/beam
! Clean residual mean=0.000001 rms=0.000208 Jy/beam
! Combined flux in latest and established models = 0.169547 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 418 components and 0.169547 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   J1700+0522_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.321 x 8.239 at -0.8617 degrees (North through East)
! Clean map  min=-0.0010766  max=0.14365 Jy/beam
! Writing clean map to FITS file: J1700+0522_S_map.fits
wmodel J1700+0522_S_map.mod
! Writing 418 model components to file: J1700+0522_S_map.mod
wobs   J1700+0522_S_uvs.fits
! Writing UV FITS file: J1700+0522_S_uvs.fits
wwins  J1700+0522_S_map.win
! wwins: Wrote 5 windows to J1700+0522_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.143651 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000208841 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.436143 0.436143 0.872287 1.74457 3.48915 6.97829 13.9566 27.9132 55.8263
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.143 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  687.847 
quit
! Quitting program
! Log file J1700+0522_S_dfm.log closed on Fri Feb 15 19:56:47 2019